Jump to content
Denicio

[Guide] macOS Sierra 10.12.x on ASRock H170M-ITX/ac

426 posts in this topic

Recommended Posts

Hi Denicio,

 

I just installed a BCM94352HMB with 10.12.1. The card does show up in the boot screen, but not under MacOS. I tried a couple of the patches found in the forum, but so far to no avail. Do you have any suggestions I could try?

 

Regards,

Tom

Hello Peerke, please take a look at post #120, right where I respond to n00bi3.

Share this post


Link to post
Share on other sites
Advertisement

Yes exactly.

ok ..wait please 

Yes exactly.

ok Denisio here my Ioreg

 

:angel:

 

of course i dont have this to 

 

 

<dict>

<key>Comment</key>

<string>Rename HECI -> IMEI</string>

<key>Disabled</key>

<false/>

<key>Find</key>

<data>

SEVDSQ==

</data>

<key>Replace</key>

<data>

SU1FSQ==

</data>

</dict>

 

iMac di magnifico.zip

Share this post


Link to post
Share on other sites

Hello Peerke, please take a look at post #120, right where I respond to n00bi3.

Hi Denicio,

 

That's the one I tried last, but still no positive result. I put the kext in the kexts/10.12 folder in the EFI partition, and the patch at the top level of config.plist, right after the first <dict>. Are these the right locations?

 

Rgds,

Tom

Share this post


Link to post
Share on other sites

Hi Denicio,

 

That's the one I tried last, but still no positive result. I put the kext in the kexts/10.12 folder in the EFI partition, and the patch at the top level of config.plist, right after the first <dict>. Are these the right locations?

 

Rgds,

Tom

Hello Tom, the kext patch is not on the first <dict>. It's on the KextsToPatch section. I think if you download Clover Configurator it would help you a lot.

ok ..wait please 

ok Denisio here my Ioreg

 

:angel:

 

of course i dont have this to 

 

 

<dict>

<key>Comment</key>

<string>Rename HECI -> IMEI</string>

<key>Disabled</key>

<false/>

<key>Find</key>

<data>

SEVDSQ==

</data>

<key>Replace</key>

<data>

SU1FSQ==

</data>

</dict>

 

OK I checked it, but it seems that USB3 ports are not injected. Add USBInjectAll.kext to your Clover kexts folder and send me the new ioreg. Maybe this kext is enough to remedy your situation.

Share this post


Link to post
Share on other sites

Hello denisio can you attached here kext? I dont have this kext

Thz

well Denisio here ioreg with kext inside folder 10.12 of clover 

Attach your EFI folder, again there are no USB3 ports on your file.

Share this post


Link to post
Share on other sites

here

The only weird thing I see, is that FakeSMC has an unusual size and the version is very old. Please use the one included on this guide.

Share this post


Link to post
Share on other sites

The only weird thing I see, is that FakeSMC has an unusual size and the version is very old. Please use the one included on this guide.

what difference does the fake.smc with USB 3?  :)

Share this post


Link to post
Share on other sites

Hello Tom, the kext patch is not on the first <dict>. It's on the KextsToPatch section. I think if you download Clover Configurator it would help you a lot.

 

 

Hi Denicio,

 

Patch is in the right spot now. From the boot log I can see that the patch is identified and the kext is loaded as well, but still no card visible.

 

0:106  0:000  KextsToPatch: 2 requested

0:106  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: data len: 12
0:106  0:000   - [01]: AirPortBrcm4360 ([darkvoid] BCM94352HMB Sierra Fix) :: BinPatch :: data len: 8
0:106  0:000  Error in Early settings0: Not Found
 
2:653  0:000  === [ FixBiosDsdt ] =======================================
2:653  0:000  VideoCard devID=0x19128086
2:653  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
2:653  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
2:653  0:000  Found Airport BCM at 0x1D0007, 0x0
 
2:675  0:001    Extra kext: EFI\CLOVER\kexts\10.12\BCM94352Injector.kext

Share this post


Link to post
Share on other sites

Hey @Denicio,

 

Do you have any clue why the computer goes into to deep sleep (hibernate) when I have hibernatemode set to 0? (I also have standby and autopoweroff disabled)

It seems to sleep for maybe about 10 seconds then proceeds to go into hibernate and crashes when it tries to boot into it.

 

I just want sleep 0, but changing darkwake=no, darkwake=8, and enabling NeverHibernate don't seem to fix this problem.

 

Thanks!

System-wide power settings:
Currently in use:
 standby              0
 Sleep On Power Button 1
 womp                 0
 autorestart          0
 hibernatefile        /var/vm/sleepimage
 powernap             0
 networkoversleep     0
 disksleep            10
 sleep                0 (sleep prevented by apsd, mds)
 autopoweroffdelay    28800
 hibernatemode        0
 autopoweroff         0
 ttyskeepawake        1
 displaysleep         5
 standbydelay         10800

Share this post


Link to post
Share on other sites

 

Hi Denicio,

 

Patch is in the right spot now. From the boot log I can see that the patch is identified and the kext is loaded as well, but still no card visible.

 

0:106  0:000  KextsToPatch: 2 requested

0:106  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: data len: 12
0:106  0:000   - [01]: AirPortBrcm4360 ([darkvoid] BCM94352HMB Sierra Fix) :: BinPatch :: data len: 8
0:106  0:000  Error in Early settings0: Not Found
 
2:653  0:000  === [ FixBiosDsdt ] =======================================
2:653  0:000  VideoCard devID=0x19128086
2:653  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
2:653  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
2:653  0:000  Found Airport BCM at 0x1D0007, 0x0
 
2:675  0:001    Extra kext: EFI\CLOVER\kexts\10.12\BCM94352Injector.kext

 

 

Odd, after a couple of reboots, the Wifi card does show up, and it now works!

Share this post


Link to post
Share on other sites

 

Hi Denicio,

 

Patch is in the right spot now. From the boot log I can see that the patch is identified and the kext is loaded as well, but still no card visible.

 

0:106  0:000  KextsToPatch: 2 requested

0:106  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: data len: 12
0:106  0:000   - [01]: AirPortBrcm4360 ([darkvoid] BCM94352HMB Sierra Fix) :: BinPatch :: data len: 8
0:106  0:000  Error in Early settings0: Not Found
 
2:653  0:000  === [ FixBiosDsdt ] =======================================
2:653  0:000  VideoCard devID=0x19128086
2:653  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
2:653  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
2:653  0:000  Found Airport BCM at 0x1D0007, 0x0
 
2:675  0:001    Extra kext: EFI\CLOVER\kexts\10.12\BCM94352Injector.kext

 

What does your system show on Wifi on System Report? I think you have to clear caches with: sudo touch /System/Library/Extensions && sudo kextcache -u /

 

Hey @Denicio,

 

Do you have any clue why the computer goes into to deep sleep (hibernate) when I have hibernatemode set to 0? (I also have standby and autopoweroff disabled)

It seems to sleep for maybe about 10 seconds then proceeds to go into hibernate and crashes when it tries to boot into it.

 

I just want sleep 0, but changing darkwake=no, darkwake=8, and enabling NeverHibernate don't seem to fix this problem.

 

Thanks!

System-wide power settings:
Currently in use:
 standby              0
 Sleep On Power Button 1
 womp                 0
 autorestart          0
 hibernatefile        /var/vm/sleepimage
 powernap             0
 networkoversleep     0
 disksleep            10
 sleep                0 (sleep prevented by apsd, mds)
 autopoweroffdelay    28800
 hibernatemode        0
 autopoweroff         0
 ttyskeepawake        1
 displaysleep         5
 standbydelay         10800

Hello! The way I prevent sleep is by going System Preferences -> Power, and check the first checkbox.

what difference does the fake.smc with USB 3?  :)

It probably doesn't, I am not sure about your problem. The patch I told you to enable (15 to 26 port) should have been showing all your USB2 - USB3 ports, but it didn't.

Share this post


Link to post
Share on other sites

Changelog:

- Added a new build of AppleALC, version 1.18.

- Due to popular demand for BCM94352, included the injector and Sierra Fix on config.plist (disabled by default).

Share this post


Link to post
Share on other sites

Hi Denicio,

 

WiFI is working smoothly now!

 

There are still a couple of issues that popped up as I further tested the system:

 

1. Bluetooth is not visible on the system. Might your suggestion to clear the kernel cache work here?

2. The second ethernet interface does not show up.

3. When I pull and then reinsert the ethernet cable, the interface won't come back up again, it toggles between 'no cable connected' and 'no system on the other of the cable'. The toggling by itself is already very disturbing :-(

4. When connected to a 2560x1600 monitor the refresh rate drops to 36Hz. I'm not a gaming freak, so it does not really bother me, but I suppose the Intel graphics just can't pump more out.

 

Apart from that it is a nice system, especially with the fan on 'silent'. I've crammed everything in a Silverstone Milo ML05B, and that really makes for a nice package, especially when you consider there is a 4-core i5 inside!

Share this post


Link to post
Share on other sites

Hi Denicio,

 

WiFI is working smoothly now!

 

There are still a couple of issues that popped up as I further tested the system:

 

1. Bluetooth is not visible on the system. Might your suggestion to clear the kernel cache work here?

2. The second ethernet interface does not show up.

3. When I pull and then reinsert the ethernet cable, the interface won't come back up again, it toggles between 'no cable connected' and 'no system on the other of the cable'. The toggling by itself is already very disturbing :-(

4. When connected to a 2560x1600 monitor the refresh rate drops to 36Hz. I'm not a gaming freak, so it does not really bother me, but I suppose the Intel graphics just can't pump more out.

 

Apart from that it is a nice system, especially with the fan on 'silent'. I've crammed everything in a Silverstone Milo ML05B, and that really makes for a nice package, especially when you consider there is a 4-core i5 inside!

 

Hello Peerke. I am glad that you got most of your system's capabilities working :)

 

1) For Bluetooth, download the latest package from RehabMan's repo, and install BrcmPatchRAM2.kext & BrcmFirmwareRepo.kext into System/Library/Extensions with Kext Wizard or any other utility of this sort. Bluetooth won't work as expected if you place those in Clover's kext folder (tried it).

2) Correct, it is not supposed to work (no support from the community).

3) You should pose your question to this thread. Kudos to Mausi for all the work.

4) Yeah, I am not entirely sure about Intel's capabilities, look up the same question for Windows users. I am sure you will find more clues as to why this is happening :)

 

Also if you need more versatility between Mac/Windows for Bluetooth, you could follow my other thread Keep Bluetooth devices paired once between Mac/Windows.

Share this post


Link to post
Share on other sites

Changelog:

- Updated version of IntelMausiEthernet to official release 2.2.0 (it's version d4 in release mode, 50% smaller size).

Share this post


Link to post
Share on other sites

Hello Peerke. I am glad that you got most of your system's capabilities working :)

 

1) For Bluetooth, download the latest package from RehabMan's repo, and install BrcmPatchRAM2.kext & BrcmFirmwareRepo.kext into System/Library/Extensions with Kext Wizard or any other utility of this sort. Bluetooth won't work as expected if you place those in Clover's kext folder (tried it).

2) Correct, it is not supposed to work (no support from the community).

3) You should pose your question to this thread. Kudos to Mausi for all the work.

4) Yeah, I am not entirely sure about Intel's capabilities, look up the same question for Windows users. I am sure you will find more clues as to why this is happening :)

 

Also if you need more versatility between Mac/Windows for Bluetooth, you could follow my other thread Keep Bluetooth devices paired once between Mac/Windows.

 

1. Got Bluetooth up and running now!

2. Installed the Realtek8111.kext and the 2nd Ethernet interface works now as well, without the glitches of the first one. I can yank the cable out, put it back in and Ethernet is reconnected.

3. Will do, after I browsed that thread to see if someone else has this problem too.

4. I have run into a weird flaw here. Normally I work at 2560x1600@36Hz. Sometimes when I reboot, resolution changes to 2200x1600@60Hz, the image is stretched to the right, the high res Apple logo is off center to the right, and once the desktop has started the disk icons fall off the screen. After a while I get all kinds of screen noise, distortion etc up to a point where the screen goes black, and I have to reboot. It could be due to the HDMI<->DVI cable, but that is something I have to test.

 

Thanks for all your support and good work Denicio, it's really helpful and this is starting to turn into a really nice system.

 

Tom

Share this post


Link to post
Share on other sites

Hi,

 

I have AsRock H170M Pro4, i5-6500. I have some issue with usb. Can you help me?

What is the problem exactly? I can see you have more than 15 ports enabled, that can't be good for macOS. Try to download the guide's .zip and apply the SSDT-2.aml along with the correct Drop SSDT table that you can find on config.plist.

Share this post


Link to post
Share on other sites

There are 3 usb ports on the front. I have tried a lot of thing, but work only 2: 1 usb 3 and 1 usb 2 on the same speed (480). 

Share this post


Link to post
Share on other sites

There are 3 usb ports on the front. I have tried a lot of thing, but work only 2: 1 usb 3 and 1 usb 2 on the same speed (480). 

Correct, my USB layout is made for 2 front USB ports. Well, you need to follow an online guide to correct this USB behavior.

Share this post


Link to post
Share on other sites

Thought I might chime in here...

 

If anyone is having troubles booting from the hard disk after you've installed clover on it, your motherboard might not be recognizing the EFI entry.

 

STEPS:

 

Boot back into Clover USB

 

UEFI 64 shell

 

Shell> map fs*

 

Shell > fs0 (1,2,3)

 

Shell > ls (key here is to find your hard disk EFI partition. Look around using the LS command until you find folders and files that you put on there.

 

Shell > cd \efi\boot

 

Shell > ls

 

Then

 

Shell > bcfg boot dump

 

Shell > bcfg boot add 1 bootx64.efi "Clover"

 

Shell > bcfg boot dump (check that your entry is there)

 

Shell > reset

 

Now after you've reset, you should remove your Clover USB and your system should boot right up with the Clover installed on your hard drive/SSD.

Share this post


Link to post
Share on other sites

I'm sure we can fix HD530 for sure. Tell me your BIOS settings for the iGPU (VRAM etc) and attach your current config.plist. As for the Bluetooth I have the same on Mini PCIe I will post details later today on how I enable it.

 

Hi Denicio,

 

 had little time to work on my build, but wanted to report back that I finally managed to get BT to work thanks to your help. I kept all of the kext files in CLOVER/kexts/10.12 instead S/L/E/, I missed this point before somehow :).

 

Oh, I've also been wondering if there's any M.2 wifi/bt card, that would allow me to use my apple wireless keyboard in BIOS/bootloader? I got used to my PCI BCM94360CD I have in my other MiniATX setup which works this way.

 

Anyway, the problem with HD530 still remains as I have no acceleration and it indicates it has 14mb @ About This Mac overview tab. No matter which id-platform corresponding to HD530 I set, with Intel Inject disabled/enabled, or with fakeID provided to get Intel HD SKL CRB, I always end up having no graphics. I might allocate 64mb/128mb/auto @ iGPU in BIOS, still it has no effect. GfxYTile patch? Nope. Last thing I see is verbose log: https://www.dropbox.com/s/7y069f5pww3pfom/IMG_0308.JPG?dl=0

 

I will add my config later, I currently have no access to my hack right now.

Share this post


Link to post
Share on other sites

Hi Denicio,

 

 had little time to work on my build, but wanted to report back that I finally managed to get BT to work thanks to your help. I kept all of the kext files in CLOVER/kexts/10.12 instead S/L/E/, I missed this point before somehow :).

 

Oh, I've also been wondering if there's any M.2 wifi/bt card, that would allow me to use my apple wireless keyboard in BIOS/bootloader? I got used to my PCI BCM94360CD I have in my other MiniATX setup which works this way.

 

Anyway, the problem with HD530 still remains as I have no acceleration and it indicates it has 14mb @ About This Mac overview tab. No matter which id-platform corresponding to HD530 I set, with Intel Inject disabled/enabled, or with fakeID provided to get Intel HD SKL CRB, I always end up having no graphics. I might allocate 64mb/128mb/auto @ iGPU in BIOS, still it has no effect. GfxYTile patch? Nope. Last thing I see is verbose log: https://www.dropbox.com/s/7y069f5pww3pfom/IMG_0308.JPG?dl=0

 

I will add my config later, I currently have no access to my hack right now.

I am glad the build worked out, but it's a shame to not make the HD530 work! There are dedicated threads about HD530, and I suggest you post your problem there for more help :)

Also about the Bluetooth, I didn't know that you can use a BT keyboard on BIOS, I would be very interested to find out that too. So if you have any information please keep me posted as well.

 

EDIT: Fire up DPCIManager and post screenshots please. Maybe we can find out about the platform ID from there.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rodrinico19
      Hola a todos, primero que nada estoy muy contento de a ver econtrado un foro de español sobre hackintosh.
      Mi problema consesite en que descargue unos drivers de esta pagina: https://github.com/chris1111/Wireless-USB-Adapter-Clover
      Seguí los pasos instale los kets en la carpeta EFI/CLOVER/OTHERS todo tal cual como dice ahi la instalación. luego segui los pasos de configurar la red dentro de configuracion del sistema etc.
      Lo cual el nombre me quedo en en0.
      El driver o kets funciona bien es reconocible por el S.O de hecho conecta la red, pero me dice que no tiene IP AUTO ASIGNADA Y LA OTRA QUE HAY UNA DESCONEXION A CADA RATO(como que desconectaras y conectaras el dispositvo usb a cada rato)
      Me gustaria que me ayuden con eso si es posible, Muchas Gracias!!
    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
×