Jump to content
Denicio

[Guide] macOS Sierra 10.12.x on ASRock H170M-ITX/ac

426 posts in this topic

Recommended Posts

Hi Guys

 

firstly Denicio, many thanks for creating this guide, this has got me further on than any other guide I could find out there.

 

Firstly the specs:

ASRock Z170M-ITX/ac  Chosen as it's on the compatibility list, along with having Display port (not yet in use) and being compatible with the case used (Streacom FC08)

16GB DDR 4 Vengeance running stock (XMP disabled)

i7 6770 non K variant

Crucial MX300 1TB SSD

 

currently tried connecting to two different monitor via DVI (will try an HDMI adaptor when I get my hands on one)

 

So following the guide and some troubleshooting tips I get to the same spot each time, it appears to be at the point where the system wants to start the GUI for the install screens, however the monitor goes off into sleep mode and is receiving no signal.

 

From verbose mode the last thing I managed to see appeared to be MCDOS has arrived, the line that appeared under it vanished too quickly to read and I was presented with the power saved screen once again.

 

If anyone has any ideas what this could be I would be very grateful for any help.

 

as an additional note Bios settings have been configured to disable VT-d , disk configurations to AHCI , primary video device to Onboard and shared Video Memory to 128 (this was seen in a previous troubleshoot for using the onboard Intel GPU)

 

Cheers

Bakerman

 

Thanks for your kind words!

It seems that this problem is related to the DVI port. Please, try to utilise the HDMI port to see if this fixes the problem.

 

I would appreciate also if you could report back with your findings.

Share this post


Link to post
Share on other sites
Advertisement

Thank you so much Denicio, display working after finally getting an HDMI to DVI adpater

now on with the install :)

 

That's great news! There's a chance you can fix your DVI port later on from within the OS. Keep us up-to-date with your progress.

Share this post


Link to post
Share on other sites

Latest issue,

Installed MacOS went through the two reboots, on the third reboot selected the Macintosh HD and get to the Register your Mac screens

after selecting DHCP network options the screen goes to the spinning wait dial but then reboots without any messages

 

Any ideas?

Share this post


Link to post
Share on other sites

Latest issue,

Installed MacOS went through the two reboots, on the third reboot selected the Macintosh HD and get to the Register your Mac screens

after selecting DHCP network options the screen goes to the spinning wait dial but then reboots without any messages

 

Any ideas?

 

Can you bypass this network configuration for now? Until you get on the desktop I mean.

Share this post


Link to post
Share on other sites

Of course it makes total sense now without the kexts the networking couldn't work, it would be a good step to add to the guide that the onboard LAN will work once clover has been configured on the Hard disk

 

Another reminder is to change the default boot priority in bios once finished so it auto boots to the OS.

 

One final thing I have enabled trim on the SSD but am not sure how I have fared with the extras section changing VBosHFS to HFSPlus (which doesn't seem to be identified with its -64bit ending anymore even though it shows up in the 64bit drivers section)

I am however using Cloverconfigurator to try that so maybe that's something to do with the software.

 

Again thank you so much for all the help, need to test sound now and wait for the wifi/bluetooth adaptor to arrive, going for the Justop one, hopefully they do a half height backplate :)

Share this post


Link to post
Share on other sites

Changelog:

- Updated ResetAddress & ResetValue in "config.plist" that solves the Restart problem.

- Added patch HD530 DP2HDMI at Port 0x6, which is the default HDMI port on this motherboard.

- Also added (but still disabled) the HD530 Boot Graphics Glitch fix. Use it only with El Capitan installations.

- USB Layout on "uia_exclude" is improved, more ports added.

Share this post


Link to post
Share on other sites

Hi Denicio

 

Many thanks for keeping this thread up to date, I think you may have posted one fix I think I need in the above update.

 

Got a combo Wlan/Bluetooth which is natively supported by Apple , Wifi works perfectly but the system doesn't see the Bluetooth,  the Bluetooth part of the module as an extra USB connection going into it on the PCI-E board, this involves connecting to the USB2 header on the Z170M-ITX/ac using up another available port.  I think increasing available ports may fix this, might try plugging the usb cable temporarily into the back to see if it changes.

 

The other issue is there is no sound, I think I need to try another kext

 

How would be best to go about updating the Clover installation that is already on there, can I just run clover install again with new kexts and settings and overwrite the boot partition?

Share this post


Link to post
Share on other sites

Hi Denicio

 

Many thanks for keeping this thread up to date, I think you may have posted one fix I think I need in the above update.

 

Got a combo Wlan/Bluetooth which is natively supported by Apple , Wifi works perfectly but the system doesn't see the Bluetooth,  the Bluetooth part of the module as an extra USB connection going into it on the PCI-E board, this involves connecting to the USB2 header on the Z170M-ITX/ac using up another available port.  I think increasing available ports may fix this, might try plugging the usb cable temporarily into the back to see if it changes.

 

The other issue is there is no sound, I think I need to try another kext

 

How would be best to go about updating the Clover installation that is already on there, can I just run clover install again with new kexts and settings and overwrite the boot partition?

 

About the Bluetooth. As you can see on "config.plist" I have excluded ports based on my system. You will need to remove this, and then add the "Increase port limit from 15 to 30 ports" on your config.plist, look that up. Then, open IORegistryExplorer.app and figure out on the XHC section which is the USB port that your Bluetooth sits on (some USB ports are not physical ports, but are used by other system devices to gain communication with the rest of the system). Remove the Bluetooth USB port you found out from the "uia_exclude" list found on this tutorial's "config.plist".

 

Just for reference, my Bluetooth is utilizing HS13, and that's why I have not excluded it!

I hope this works for you :)

Share this post


Link to post
Share on other sites

Hi, Denicio,

 

I have already use your guide to finish the installation of Sierra.  Everything is fine but the internal sound is not available.

 

Also I buy the HD6450 graphic card to replace the Intel HD530, it is on the way. What I can do after install the new graphic card?

 

Please help me, thanks.

 

Best regards.

 

Kenxing

Share this post


Link to post
Share on other sites

Hi, Denicio,

 

I have already use your guide to finish the installation of Sierra.  Everything is fine but the internal sound is not available.

 

Also I buy the HD6450 graphic card to replace the Intel HD530, it is on the way. What I can do after install the new graphic card?

 

Please help me, thanks.

 

Best regards.

 

Kenxing

 

What exactly have you done for enabling sound?

 

The procedure is to install AppleALC.kext to /CLOVER/kexts/other and on Clover to Inject Audio Layout 1.

Also don't forget the HDAS to HDEF SSDT patch again on Clover.

Share this post


Link to post
Share on other sites

What exactly have you done for enabling sound?

 

The procedure is to install AppleALC.kext to /CLOVER/kexts/other and on Clover to Inject Audio Layout 1.

Also don't forget the HDAS to HDEF SSDT patch again on Clover.

 

Yes, sir. I have done as you said. But I still can't hear the sound in the earphone jack onboard.

Please help me review the setting in Config.plist.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>FixHDA_8000</key>
				<true/>
			</dict>
			<key>Patches</key>
			<array>
				<dict>
					<key>Comment</key>
					<string>Rename HECI to IMEI</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SEVDSQ==
					</data>
					<key>Replace</key>
					<data>
					SU1FSQ==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>Rename HDAS to HDEF</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SERBUw==
					</data>
					<key>Replace</key>
					<data>
					SERFRg==
					</data>
				</dict>
			</array>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>ResetAddress</key>
		<string>0x0CF9</string>
		<key>ResetValue</key>
		<string>0x06</string>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>dart=0 uia_exclude=HS01;HS02;HS14;SS03;SS04;SS07;SS08;SS09;SS10;USR1;USR2 -alcbeta</string>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>LastBootedVolume</string>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>Yes</string>
	</dict>
	<key>CPU</key>
	<dict>
		<key>UseARTFrequency</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>1</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<false/>
		</dict>
	</dict>
	<key>GUI</key>
	<dict>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<false/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Linux</key>
			<false/>
			<key>Tool</key>
			<false/>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
		<key>ig-platform-id</key>
		<string>0x19120000</string>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<false/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelHaswellE</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>Boot Graphics Glitch (for El Capitan)</string>
				<key>Disabled</key>
				<true/>
				<key>Find</key>
				<data>
				AQAAdRc=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				AQAA6xc=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>HD530 DP2HDMI at Port 0x6</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				AgQKAAAEAACHAQAA
				</data>
				<key>Name</key>
				<string>AppleIntelSKLGraphicsFramebuffer</string>
				<key>Replace</key>
				<data>
				AgQKAAAIAACHAQAA
				</data>
			</dict>
		</array>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>Trust</key>
		<false/>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Yes</string>
	</dict>
</dict>
</plist>

Share this post


Link to post
Share on other sites

 

Yes, sir. I have done as you said. But I still can't hear the sound in the earphone jack onboard.

Please help me review the setting in Config.plist.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>FixHDA_8000</key>
				<true/>
			</dict>
			<key>Patches</key>
			<array>
				<dict>
					<key>Comment</key>
					<string>Rename HECI to IMEI</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SEVDSQ==
					</data>
					<key>Replace</key>
					<data>
					SU1FSQ==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>Rename HDAS to HDEF</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SERBUw==
					</data>
					<key>Replace</key>
					<data>
					SERFRg==
					</data>
				</dict>
			</array>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>ResetAddress</key>
		<string>0x0CF9</string>
		<key>ResetValue</key>
		<string>0x06</string>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>dart=0 uia_exclude=HS01;HS02;HS14;SS03;SS04;SS07;SS08;SS09;SS10;USR1;USR2 -alcbeta</string>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>LastBootedVolume</string>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>Yes</string>
	</dict>
	<key>CPU</key>
	<dict>
		<key>UseARTFrequency</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>1</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<false/>
		</dict>
	</dict>
	<key>GUI</key>
	<dict>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<false/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Linux</key>
			<false/>
			<key>Tool</key>
			<false/>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
		<key>ig-platform-id</key>
		<string>0x19120000</string>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<false/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelHaswellE</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>Boot Graphics Glitch (for El Capitan)</string>
				<key>Disabled</key>
				<true/>
				<key>Find</key>
				<data>
				AQAAdRc=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				AQAA6xc=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>HD530 DP2HDMI at Port 0x6</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				AgQKAAAEAACHAQAA
				</data>
				<key>Name</key>
				<string>AppleIntelSKLGraphicsFramebuffer</string>
				<key>Replace</key>
				<data>
				AgQKAAAIAACHAQAA
				</data>
			</dict>
		</array>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>Trust</key>
		<false/>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Yes</string>
	</dict>
</dict>
</plist>

 

OK let's start ruling out the trivial stuff:

 

1) The "FixHDA" and the "Rename HDAS to HDEF" do the exact same thing. Please let's keep one for now.

2) Are you using macOS Sierra? If *no*, then remove the "-alcbeta" Boot Flag.

3) Make sure AppleALC.kext is installed on CLOVER/kexts/10.11 for El Capitan, and on CLOVER/kexts/other if you have installed macOS Sierra.

4) It would be useful if you downloaded "DPCIManager.app" and attached on a file your Boot Log :)

Share this post


Link to post
Share on other sites

OK let's start ruling out the trivial stuff:

 

1) The "FixHDA" and the "Rename HDAS to HDEF" do the exact same thing. Please let's keep one for now.

2) Are you using macOS Sierra? If *no*, then remove the "-alcbeta" Boot Flag.

3) Make sure AppleALC.kext is installed on CLOVER/kexts/10.11 for El Capitan, and on CLOVER/kexts/other if you have installed macOS Sierra.

4) It would be useful if you downloaded "DPCIManager.app" and attached on a file your Boot Log :)

 

Thank you. I follow your advice:

 

1) Disable the "Rename HDAS to HDEF", keep the "FixHDA".

2) Yes, I'm using macOS Sierra.

3) I make sure that AppleALC.kext is installed on CLOVER/kexts/other directory.

4) I downloaded "DPCIManager.app", run it, boot log as attached.

0:100  0:100  MemLog inited, TSC freq: 3192429310
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 24.10.2016,  2:31:12 (GMT)
0:100  0:000  Starting Clover revision: 3811 on American Megatrends EFI
0:100  0:000  Build with: [Args: --no-lto -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_LTO -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.1 | XCODE: 8.0]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000) @7D97E998
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Kingston
0:100  0:000  SmbiosTable.Type17->SerialNumber = 23381020
0:100  0:000  SmbiosTable.Type17->PartNumber = KHX2400C15/8G       
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'To Be Filled By O.E.M.' with board 'H170M-ITX_ac'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 266
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003227
0:100  0:000  MSR 0xE2 before patch 1E000006
0:100  0:000  MSR 0xE4              00031814
0:100  0:000  MSR 0xCE              00080838_F1012000
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 32.0/8
0:100  0:000  Turbo: 33/34/35/36
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3200 MHz
0:100  0:000  TSC: 3200 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:100  0:000  PCI (00|01:00.00) : 1002 6779 class=030000
0:100  0:000   - GFX: Model=AMD Radeon HD 6450/7450/8450/R5 230 (ATI/AMD)
0:100  0:000  PCI (00|01:00.01) : 1002 AA98 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100  0:000  PCI (00|00:14.02) : 8086 A131 class=118000
0:100  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:100  0:000  PCI (00|00:1C.00) : 8086 A114 class=060400
0:100  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:100  0:000  PCI (00|00:1D.03) : 8086 A11B class=060400
0:100  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1F.00) : 8086 A144 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:100  0:000   - LAN: 1 Vendor=Intel
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:102  0:001  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  === [ GetListOfThemes ] ===================================
0:103  0:000  - [00]: embedded
0:103  0:000  - [00]: random
0:103  0:000  === [ Found config plists ] ===============================
0:103  0:000  - config.plist
0:103  0:000  === [ GetEarlyUserSettings ] ==============================
0:103  0:000  timeout set to 5
0:103  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:103  0:000  KextsToPatch: 2 requested
0:103  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: data len: 12
0:103  0:000   - [01]: IOGraphicsFamily (Boot Graphics Glitch (for El Capitan)) :: patch disabled, skipped
0:103  0:000  === [ LoadDrivers ] =======================================
0:103  0:000  Loading FSInject-64.efi  status=Success
0:105  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success
0:105  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:106  0:000  Loading VBoxHfs-64.efi  status=Success
0:106  0:000   - driver needs connecting
0:106  0:000  1 drivers needs connecting ...
0:106  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:106  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:218  0:111  === [ InitScreen ] ========================================
0:218  0:000  SetMaxResolution: found best mode 5: 1280x1024
0:354  0:136  Video mode change to mode #5: Success
0:354  0:000   - set
0:354  0:000  Console modes reported: 4, available modes:
0:354  0:000   - [01]: 80x25 (current mode)
0:354  0:000   - [02]: 128x40
0:354  0:000   - [03]: 100x31
0:354  0:000   - [04]: 160x53
0:354  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000)
0:354  0:000  Using embedded font: Success
0:993  0:638  === [ GetMacAddress ] =====================================
0:993  0:000  === [ ScanSPD ] ===========================================
0:993  0:000  SMBus device : 8086 A123 class=0C0500 status=Success
0:993  0:000  SMBus CmdReg: 0x3
0:993  0:000  Scanning SMBus [8086:A123], mmio: 0xDFF4A004, ioport: 0xF000, hostc: 0x1
0:993  0:000  Slots to scan [8]...
0:994  0:000  SPD[0]: Type 12 @0x50
1:011  0:017  XMP Profile1: 7*125 -42 ns
1:011  0:000  Found module with XMP version 2.0
1:011  0:000  Using XMP Profile1 instead of standard frequency 2400MHz
1:011  0:000  DDR speed 2400MHz
1:011  0:000  Slot: 0 Type 26 8192MB 2400MHz Vendor=Kingston PartNo=KHX2400C158G SerialNo=0E0D020606060C0D
1:012  0:001  === [ GetAcpiTablesList ] =================================
1:012  0:000  Get Acpi Tables List from RSDT:
1:012  0:000   - [00]: FACP  A M I  len=132
1:012  0:000   - [01]: APIC  A M I  len=132
1:012  0:000   - [02]: FPDT  A M I  len=68
1:012  0:000   - [03]: FIDT  A M I  len=156
1:012  0:000   - [04]: MCFG  A M I len=60
1:012  0:000   - [05]: HPET  A M I len=56
1:012  0:000   - [06]: SSDT  SataTabl len=877
1:012  0:000   - [07]: LPIT  SKL len=148
1:012  0:000   - [08]: SSDT  UsbCTabl len=43
1:012  0:000   - [09]: DBGP   len=52
1:012  0:000   - [10]: DBG2   len=84
1:012  0:000   - [11]: SSDT  xh_rvp08 len=1558
1:012  0:000   - [12]: AAFT  OEMAAFT  len=649
1:012  0:000   - [13]: SSDT  SaSsdt  len=21010
1:012  0:000   - [14]: UEFI   len=66
1:012  0:000   - [15]: SSDT  CpuSsdt len=3672
1:012  0:000   - [16]: BGRT  A M I  len=56
1:012  0:000   - [17]: ASF!   HCG len=165
1:012  0:000  Calibrated TSC frequency =3192429310 =3192MHz
1:012  0:000  === [ GetUserSettings ] ===================================
1:012  0:000  USB FixOwnership: yes
1:012  0:000   - final DSDT Fix mask=00008000
1:012  0:000  PatchesDSDT: 2 requested
1:012  0:000   - [00]: (Rename HECI to IMEI) lenToFind: 4, lenToReplace: 4
1:013  0:000   - [01]: (Rename HDAS to HDEF) patch disabled, skipped
1:013  0:000  ResetAddr: 0xCF9
1:013  0:000  Calc ResetVal: 0x6
1:013  0:000  ResetVal: 0x6
1:013  0:000  Using smbios.plist at path: EFI\CLOVER\smbios.plist
1:013  0:000  === [ ScanVolumes ] =======================================
1:013  0:000  Found 4 volumes with blockIO
1:013  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
1:013  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000)
1:014  0:000          Result of bootcode detection: bootable unknown (legacy)
1:014  0:000          This is SelfVolume !!
1:014  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:015  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,ECC76084-9E99-4D54-B07A-4B2C993227A6,0xDE5EC68,0x135F20)
1:015  0:000  === [ InitTheme ] =========================================
1:015  0:000   using embedded theme
1:016  0:000  Using embedded font: Success
1:016  0:000  Choosing theme <null string>
1:016  0:000  after NVRAM boot-args=dart=0 uia_exclude=HS01;HS02;HS14;SS03;SS04;SS07;SS08;SS09;SS10;USR1;USR2 -alcbeta
1:016  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:016  0:000  no AppleSMC protocol
1:028  0:011  === [ ScanLoader ] ========================================
1:028  0:000  - [01]: 'EFI'
1:028  0:000  - [02]: 'MacOS'
1:037  0:009          AddLoaderEntry for Volume Name=MacOS
1:042  0:005      Check if volume Is Hibernated:
1:042  0:000      Check sleep image 'by signature':
1:054  0:012      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:054  0:000      using default sleep image name = \private\var\vm\sleepimage
1:059  0:004      Reading first 512 bytes of sleepimage ...
1:060  0:000      OurBlockIoRead: Lba=42E7E38, Offset=85CFC7000 (BlockSize=512)
1:060  0:000      sig lion: 0
1:060  0:000      sig snow: 0
1:060  0:000      no valid sleep image offset was found
1:060  0:000      Reading completed -> Success
1:060  0:000       sleepimage offset could not be acquired
1:060  0:000      hibernated: no - sign
1:060  0:000  - [03]: 'Recovery HD'
1:061  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:062  0:000  === [ AddCustomTool ] =====================================
1:063  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
1:063  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:063  0:000    - Volume: 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)'
1:063  0:000    - LoaderPath: '<null string>'
1:063  0:000    - Guid = 963859D9-CC3E-43E5-B851-8FA7C438C32B
1:063  0:000  === [ FindStartupDiskVolume ] =============================
1:063  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:063  0:000     - searching for that partition
1:063  0:000      - found entry 0. 'Boot Mac OS X from MacOS', Volume 'MacOS'
1:063  0:000  Boot redirected to Entry 0. 'Boot Mac OS X from MacOS'
1:063  0:000  DefaultIndex=0 and MainMenu.EntryCount=6
1:116  0:052  GUI ready
7:126  6:009  === [ StartLoader ] =======================================
7:126  0:000  Finally: Bus=99763kHz CPU=3192MHz
7:126  0:000  Loading boot.efi  status=Success
7:250  0:124  GetOSVersion: 10.12 (16A323)
7:250  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION
7:250  0:000  Filtering KextPatches:
7:250  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
7:250  0:000  === [ PatchSmbios ] =======================================
7:251  0:000  insert table 9 for dev 0:0
7:251  0:000  insert table 9 for dev 0:1
7:251  0:000  insert table 9 for dev 1F:6
7:251  0:000  Channels: 1
7:251  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
7:251  0:000  SMBIOS Type 17 Index = 0 => 0 0:
7:251  0:000  BANK0 DIMM0 2400MHz 8192MB
7:251  0:000  SMBIOS Type 17 Index = 1 => 1 1:
7:251  0:000  BANK0 DIMM1 EMPTY
7:251  0:000  mTotalSystemMemory = 8192
7:251  0:000  NumberOfMemoryDevices = 2
7:251  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
7:251  0:000  Table 131 is present, CPUType=14
7:251  0:000  Change to: 605
7:251  0:000  === [ PatchACPI ] =========================================
7:251  0:000  RSDT 0x7FF31028
7:251  0:000  FADT from RSDT: 0x7FF31160
7:251  0:000  XSDT 0x7FF31098
7:251  0:000  FADT from XSDT: 0x7FF520A8
7:251  0:000  Xsdt reallocation done
7:251  0:000  old FADT length=10C
7:251  0:000  Apply DsdtFixMask=0x00008000 old way
7:251  0:000     drop _DSM mask=0x0000
7:251  0:000  === [ FixBiosDsdt ] =======================================
7:251  0:000  VideoCard devID=0x67791002
7:251  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
7:251  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
7:264  0:013  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
7:264  0:000  Patching DSDT:
7:264  0:000   - [00]: pattern 48454349, patched at: [ (F02B) ]
7:264  0:000  first CPU found at 852D offset 8530
7:264  0:000  score candidate at 8529
7:264  0:000  score inserted in acpi_cpu_score _PR_
7:264  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:265  0:000  Found PCIROOTUID = 0
7:265  0:000  patch HDEF in DSDT 
7:266  0:000  Start HDA Fix
7:266  0:000  found HDA device NAME(_ADR,0x001F0003) And Name is HDAS
7:266  0:000  Name HDAS present at 0x9B73, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB566, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB5F0, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB601, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB6A6, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB714, renaming to HDEF
7:266  0:000  _DSM already exists, patch HDA will not be applied
7:266  0:000  === [ ACPIDropTables ] ====================================
7:266  0:000  === [ PatchAllSSDT ] ======================================
7:266  0:000  Patch table: SSDT  SataTabl
7:266  0:000   SSDT len = 0x36D
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  UsbCTabl
7:266  0:000   SSDT len = 0x2B
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  xh_rvp08
7:266  0:000   SSDT len = 0x616
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  SaSsdt 
7:266  0:000   SSDT len = 0x5212
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  CpuSsdt
7:266  0:000   SSDT len = 0xE58
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:266  0:000   Xsdt has tables count=18
7:266  0:000  corrected XSDT length=180
7:266  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
7:266  0:000  Maximum control=0x20
7:266  0:000  Turbo control=0x24
7:266  0:000  P-States: min 0x8, max 0x24
7:266  0:000  SSDT with CPU P-States generated successfully
7:266  0:000  SSDT with CPU C-States generated successfully
7:266  0:000  === [ RestSetupOSX ] ======================================
7:266  0:000  EdidDiscovered size=128
7:266  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  05  E3
7:266  0:000  010  |  67  23  76  00  00  00  09  17  01  03
7:266  0:000  020  |  80  33  1D  78  2A  E2  95  A2  55  4F
7:266  0:000  030  |  9F  26  11  50  54  BF  EF  00  D1  C0
7:266  0:000  040  |  B3  00  95  00  81  80  81  40  81  C0
7:266  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
7:266  0:000  060  |  2D  40  58  2C  45  00  FD  1E  11  00
7:266  0:000  070  |  00  1E  00  00  00  FD  00  32  4C  1E
7:266  0:000  080  |  53  11  00  0A  20  20  20  20  20  20
7:266  0:000  090  |  00  00  00  FC  00  44  32  33  36  37
7:266  0:000  100  |  0A  20  20  20  20  20  20  20  00  00
7:266  0:000  110  |  00  FF  00  42  42  4D  44  32  39  41
7:266  0:000  120  |  30  30  30  31  31  38  01  18
7:266  0:000  ATI injection not set
7:266  0:000   RCBA disabled; cannot use it
7:266  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
7:266  0:000  stringlength = 748
7:266  0:000  CurrentMode: Width=1280 Height=1024
7:266  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 7D97E698
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 7D97E698
7:271  0:004  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:271  0:000    Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext
7:276  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
7:278  0:001    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
7:279  0:001    Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext
7:282  0:002    Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext
7:290  0:008  SetStartupDiskVolume:
7:290  0:000    * Volume: 'MacOS'
7:290  0:000    * LoaderPath: '<null string>'
7:290  0:000    * DevPath: MacOS
7:290  0:000    * GUID = 963859D9-CC3E-43E5-B851-8FA7C438C32B
7:290  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>963859D9-CC3E-43E5-B851-8FA7C438C32B</string></dict></dict></dict></array>
7:291  0:000  Custom boot is disabled

Share this post


Link to post
Share on other sites

 

Thank you. I follow your advice:

 

1) Disable the "Rename HDAS to HDEF", keep the "FixHDA".

2) Yes, I'm using macOS Sierra.

3) I make sure that AppleALC.kext is installed on CLOVER/kexts/other directory.

4) I downloaded "DPCIManager.app", run it, boot log as attached.

0:100  0:100  MemLog inited, TSC freq: 3192429310
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 24.10.2016,  2:31:12 (GMT)
0:100  0:000  Starting Clover revision: 3811 on American Megatrends EFI
0:100  0:000  Build with: [Args: --no-lto -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_LTO -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.1 | XCODE: 8.0]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000) @7D97E998
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Kingston
0:100  0:000  SmbiosTable.Type17->SerialNumber = 23381020
0:100  0:000  SmbiosTable.Type17->PartNumber = KHX2400C15/8G       
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'To Be Filled By O.E.M.' with board 'H170M-ITX_ac'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 266
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003227
0:100  0:000  MSR 0xE2 before patch 1E000006
0:100  0:000  MSR 0xE4              00031814
0:100  0:000  MSR 0xCE              00080838_F1012000
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 32.0/8
0:100  0:000  Turbo: 33/34/35/36
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3200 MHz
0:100  0:000  TSC: 3200 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:100  0:000  PCI (00|01:00.00) : 1002 6779 class=030000
0:100  0:000   - GFX: Model=AMD Radeon HD 6450/7450/8450/R5 230 (ATI/AMD)
0:100  0:000  PCI (00|01:00.01) : 1002 AA98 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100  0:000  PCI (00|00:14.02) : 8086 A131 class=118000
0:100  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:100  0:000  PCI (00|00:1C.00) : 8086 A114 class=060400
0:100  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:100  0:000  PCI (00|00:1D.03) : 8086 A11B class=060400
0:100  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1F.00) : 8086 A144 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:100  0:000   - LAN: 1 Vendor=Intel
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:102  0:001  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  === [ GetListOfThemes ] ===================================
0:103  0:000  - [00]: embedded
0:103  0:000  - [00]: random
0:103  0:000  === [ Found config plists ] ===============================
0:103  0:000  - config.plist
0:103  0:000  === [ GetEarlyUserSettings ] ==============================
0:103  0:000  timeout set to 5
0:103  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:103  0:000  KextsToPatch: 2 requested
0:103  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: data len: 12
0:103  0:000   - [01]: IOGraphicsFamily (Boot Graphics Glitch (for El Capitan)) :: patch disabled, skipped
0:103  0:000  === [ LoadDrivers ] =======================================
0:103  0:000  Loading FSInject-64.efi  status=Success
0:105  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success
0:105  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:106  0:000  Loading VBoxHfs-64.efi  status=Success
0:106  0:000   - driver needs connecting
0:106  0:000  1 drivers needs connecting ...
0:106  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:106  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:218  0:111  === [ InitScreen ] ========================================
0:218  0:000  SetMaxResolution: found best mode 5: 1280x1024
0:354  0:136  Video mode change to mode #5: Success
0:354  0:000   - set
0:354  0:000  Console modes reported: 4, available modes:
0:354  0:000   - [01]: 80x25 (current mode)
0:354  0:000   - [02]: 128x40
0:354  0:000   - [03]: 100x31
0:354  0:000   - [04]: 160x53
0:354  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000)
0:354  0:000  Using embedded font: Success
0:993  0:638  === [ GetMacAddress ] =====================================
0:993  0:000  === [ ScanSPD ] ===========================================
0:993  0:000  SMBus device : 8086 A123 class=0C0500 status=Success
0:993  0:000  SMBus CmdReg: 0x3
0:993  0:000  Scanning SMBus [8086:A123], mmio: 0xDFF4A004, ioport: 0xF000, hostc: 0x1
0:993  0:000  Slots to scan [8]...
0:994  0:000  SPD[0]: Type 12 @0x50
1:011  0:017  XMP Profile1: 7*125 -42 ns
1:011  0:000  Found module with XMP version 2.0
1:011  0:000  Using XMP Profile1 instead of standard frequency 2400MHz
1:011  0:000  DDR speed 2400MHz
1:011  0:000  Slot: 0 Type 26 8192MB 2400MHz Vendor=Kingston PartNo=KHX2400C158G SerialNo=0E0D020606060C0D
1:012  0:001  === [ GetAcpiTablesList ] =================================
1:012  0:000  Get Acpi Tables List from RSDT:
1:012  0:000   - [00]: FACP  A M I  len=132
1:012  0:000   - [01]: APIC  A M I  len=132
1:012  0:000   - [02]: FPDT  A M I  len=68
1:012  0:000   - [03]: FIDT  A M I  len=156
1:012  0:000   - [04]: MCFG  A M I len=60
1:012  0:000   - [05]: HPET  A M I len=56
1:012  0:000   - [06]: SSDT  SataTabl len=877
1:012  0:000   - [07]: LPIT  SKL len=148
1:012  0:000   - [08]: SSDT  UsbCTabl len=43
1:012  0:000   - [09]: DBGP   len=52
1:012  0:000   - [10]: DBG2   len=84
1:012  0:000   - [11]: SSDT  xh_rvp08 len=1558
1:012  0:000   - [12]: AAFT  OEMAAFT  len=649
1:012  0:000   - [13]: SSDT  SaSsdt  len=21010
1:012  0:000   - [14]: UEFI   len=66
1:012  0:000   - [15]: SSDT  CpuSsdt len=3672
1:012  0:000   - [16]: BGRT  A M I  len=56
1:012  0:000   - [17]: ASF!   HCG len=165
1:012  0:000  Calibrated TSC frequency =3192429310 =3192MHz
1:012  0:000  === [ GetUserSettings ] ===================================
1:012  0:000  USB FixOwnership: yes
1:012  0:000   - final DSDT Fix mask=00008000
1:012  0:000  PatchesDSDT: 2 requested
1:012  0:000   - [00]: (Rename HECI to IMEI) lenToFind: 4, lenToReplace: 4
1:013  0:000   - [01]: (Rename HDAS to HDEF) patch disabled, skipped
1:013  0:000  ResetAddr: 0xCF9
1:013  0:000  Calc ResetVal: 0x6
1:013  0:000  ResetVal: 0x6
1:013  0:000  Using smbios.plist at path: EFI\CLOVER\smbios.plist
1:013  0:000  === [ ScanVolumes ] =======================================
1:013  0:000  Found 4 volumes with blockIO
1:013  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
1:013  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,86E7F338-4C7D-4A1A-88E1-64BDDFDB8443,0x28,0x64000)
1:014  0:000          Result of bootcode detection: bootable unknown (legacy)
1:014  0:000          This is SelfVolume !!
1:014  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:015  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,ECC76084-9E99-4D54-B07A-4B2C993227A6,0xDE5EC68,0x135F20)
1:015  0:000  === [ InitTheme ] =========================================
1:015  0:000   using embedded theme
1:016  0:000  Using embedded font: Success
1:016  0:000  Choosing theme <null string>
1:016  0:000  after NVRAM boot-args=dart=0 uia_exclude=HS01;HS02;HS14;SS03;SS04;SS07;SS08;SS09;SS10;USR1;USR2 -alcbeta
1:016  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:016  0:000  no AppleSMC protocol
1:028  0:011  === [ ScanLoader ] ========================================
1:028  0:000  - [01]: 'EFI'
1:028  0:000  - [02]: 'MacOS'
1:037  0:009          AddLoaderEntry for Volume Name=MacOS
1:042  0:005      Check if volume Is Hibernated:
1:042  0:000      Check sleep image 'by signature':
1:054  0:012      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:054  0:000      using default sleep image name = \private\var\vm\sleepimage
1:059  0:004      Reading first 512 bytes of sleepimage ...
1:060  0:000      OurBlockIoRead: Lba=42E7E38, Offset=85CFC7000 (BlockSize=512)
1:060  0:000      sig lion: 0
1:060  0:000      sig snow: 0
1:060  0:000      no valid sleep image offset was found
1:060  0:000      Reading completed -> Success
1:060  0:000       sleepimage offset could not be acquired
1:060  0:000      hibernated: no - sign
1:060  0:000  - [03]: 'Recovery HD'
1:061  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:062  0:000  === [ AddCustomTool ] =====================================
1:063  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
1:063  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:063  0:000    - Volume: 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)'
1:063  0:000    - LoaderPath: '<null string>'
1:063  0:000    - Guid = 963859D9-CC3E-43E5-B851-8FA7C438C32B
1:063  0:000  === [ FindStartupDiskVolume ] =============================
1:063  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,963859D9-CC3E-43E5-B851-8FA7C438C32B,0x64028,0xDDFAC40)
1:063  0:000     - searching for that partition
1:063  0:000      - found entry 0. 'Boot Mac OS X from MacOS', Volume 'MacOS'
1:063  0:000  Boot redirected to Entry 0. 'Boot Mac OS X from MacOS'
1:063  0:000  DefaultIndex=0 and MainMenu.EntryCount=6
1:116  0:052  GUI ready
7:126  6:009  === [ StartLoader ] =======================================
7:126  0:000  Finally: Bus=99763kHz CPU=3192MHz
7:126  0:000  Loading boot.efi  status=Success
7:250  0:124  GetOSVersion: 10.12 (16A323)
7:250  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION
7:250  0:000  Filtering KextPatches:
7:250  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (HD530 DP2HDMI at Port 0x6) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
7:250  0:000  === [ PatchSmbios ] =======================================
7:251  0:000  insert table 9 for dev 0:0
7:251  0:000  insert table 9 for dev 0:1
7:251  0:000  insert table 9 for dev 1F:6
7:251  0:000  Channels: 1
7:251  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
7:251  0:000  SMBIOS Type 17 Index = 0 => 0 0:
7:251  0:000  BANK0 DIMM0 2400MHz 8192MB
7:251  0:000  SMBIOS Type 17 Index = 1 => 1 1:
7:251  0:000  BANK0 DIMM1 EMPTY
7:251  0:000  mTotalSystemMemory = 8192
7:251  0:000  NumberOfMemoryDevices = 2
7:251  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
7:251  0:000  Table 131 is present, CPUType=14
7:251  0:000  Change to: 605
7:251  0:000  === [ PatchACPI ] =========================================
7:251  0:000  RSDT 0x7FF31028
7:251  0:000  FADT from RSDT: 0x7FF31160
7:251  0:000  XSDT 0x7FF31098
7:251  0:000  FADT from XSDT: 0x7FF520A8
7:251  0:000  Xsdt reallocation done
7:251  0:000  old FADT length=10C
7:251  0:000  Apply DsdtFixMask=0x00008000 old way
7:251  0:000     drop _DSM mask=0x0000
7:251  0:000  === [ FixBiosDsdt ] =======================================
7:251  0:000  VideoCard devID=0x67791002
7:251  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
7:251  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
7:264  0:013  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
7:264  0:000  Patching DSDT:
7:264  0:000   - [00]: pattern 48454349, patched at: [ (F02B) ]
7:264  0:000  first CPU found at 852D offset 8530
7:264  0:000  score candidate at 8529
7:264  0:000  score inserted in acpi_cpu_score _PR_
7:264  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:265  0:000  Found PCIROOTUID = 0
7:265  0:000  patch HDEF in DSDT 
7:266  0:000  Start HDA Fix
7:266  0:000  found HDA device NAME(_ADR,0x001F0003) And Name is HDAS
7:266  0:000  Name HDAS present at 0x9B73, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB566, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB5F0, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB601, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB6A6, renaming to HDEF
7:266  0:000  Name HDAS present at 0xB714, renaming to HDEF
7:266  0:000  _DSM already exists, patch HDA will not be applied
7:266  0:000  === [ ACPIDropTables ] ====================================
7:266  0:000  === [ PatchAllSSDT ] ======================================
7:266  0:000  Patch table: SSDT  SataTabl
7:266  0:000   SSDT len = 0x36D
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  UsbCTabl
7:266  0:000   SSDT len = 0x2B
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  xh_rvp08
7:266  0:000   SSDT len = 0x616
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  SaSsdt 
7:266  0:000   SSDT len = 0x5212
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Patch table: SSDT  CpuSsdt
7:266  0:000   SSDT len = 0xE58
7:266  0:000  Patching SSDT:
7:266  0:000   - [00]: pattern 48454349, bin not found / already patched!
7:266  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:266  0:000   Xsdt has tables count=18
7:266  0:000  corrected XSDT length=180
7:266  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
7:266  0:000  Maximum control=0x20
7:266  0:000  Turbo control=0x24
7:266  0:000  P-States: min 0x8, max 0x24
7:266  0:000  SSDT with CPU P-States generated successfully
7:266  0:000  SSDT with CPU C-States generated successfully
7:266  0:000  === [ RestSetupOSX ] ======================================
7:266  0:000  EdidDiscovered size=128
7:266  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  05  E3
7:266  0:000  010  |  67  23  76  00  00  00  09  17  01  03
7:266  0:000  020  |  80  33  1D  78  2A  E2  95  A2  55  4F
7:266  0:000  030  |  9F  26  11  50  54  BF  EF  00  D1  C0
7:266  0:000  040  |  B3  00  95  00  81  80  81  40  81  C0
7:266  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
7:266  0:000  060  |  2D  40  58  2C  45  00  FD  1E  11  00
7:266  0:000  070  |  00  1E  00  00  00  FD  00  32  4C  1E
7:266  0:000  080  |  53  11  00  0A  20  20  20  20  20  20
7:266  0:000  090  |  00  00  00  FC  00  44  32  33  36  37
7:266  0:000  100  |  0A  20  20  20  20  20  20  20  00  00
7:266  0:000  110  |  00  FF  00  42  42  4D  44  32  39  41
7:266  0:000  120  |  30  30  30  31  31  38  01  18
7:266  0:000  ATI injection not set
7:266  0:000   RCBA disabled; cannot use it
7:266  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
7:266  0:000  stringlength = 748
7:266  0:000  CurrentMode: Width=1280 Height=1024
7:266  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 7D97E698
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 7D97E698
7:271  0:004  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:271  0:000    Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext
7:276  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
7:278  0:001    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
7:279  0:001    Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext
7:282  0:002    Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext
7:290  0:008  SetStartupDiskVolume:
7:290  0:000    * Volume: 'MacOS'
7:290  0:000    * LoaderPath: '<null string>'
7:290  0:000    * DevPath: MacOS
7:290  0:000    * GUID = 963859D9-CC3E-43E5-B851-8FA7C438C32B
7:290  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>963859D9-CC3E-43E5-B851-8FA7C438C32B</string></dict></dict></dict></array>
7:291  0:000  Custom boot is disabled

 

From what I see on the log, it seems that you should have sound! Can you open "System Preferences" and look if there are any sound output devices on the list?

Share this post


Link to post
Share on other sites

From what I see on the log, it seems that you should have sound! Can you open "System Preferences" and look if there are any sound output devices on the list?

 

post-1854439-0-56552200-1477357988_thumb.png

Share this post


Link to post
Share on other sites

Does it work then? It seems so.

 

When I select output named "Internal Speakers" , the sound heard in the rear output. Wonderful, my Mac Sierra  is health.

 

Thank you help !!!

Share this post


Link to post
Share on other sites

When I select output named "Internal Speakers" , the sound heard in the rear output. Wonderful, my Mac Sierra  is health.

 

Thank you help !!!

 

Yes exactly :)

No problem, anytime.

Share this post


Link to post
Share on other sites

Hi Denicio

 

Again it's been a while since I had a chance to work on the Hackintosh

 

I removed your line of code from the Plist using Cloverconfigurator (this takes some getting used to)

It seem the USBInjectAll Kext already removed limits of USB ports, so did not require further work on the Z170M-ITX/ac

 

Bluetooth and Audio has sprung into life.

 

Now we are looking to run the latest update to Sierra but I am getting a 1004 error connecting to the update server, this may yet be network related.

 

A massive thumbs up for this awesome guide.

 

p.s. Also had to select internal speakers for audio output

Share this post


Link to post
Share on other sites

I'm suffering with this problem, a really annoying artifact on the upper left corner, see post:

 

Are more people having this issue?

Share this post


Link to post
Share on other sites

I'm suffering with this problem, a really annoying artifact on the upper left corner, see post:

 

 

Are more people having this issue?

 

Changelog:

- Added new version of "config.plist" that includes HD530 Graphics Glitch fix on Sierra.

- Updated AppleALC, FakeSMC.

- Vanilla USB ports with "SSDT-2.aml".

Share this post


Link to post
Share on other sites

Changelog:

- Added new version of "config.plist" that includes HD530 Graphics Glitch fix on Sierra.

- Updated AppleALC, FakeSMC.

- Vanilla USB ports with "SSDT-2.aml".

 
Hi Denicio,
 
I want to give you big thumbs up, I think it's unbelievable what you did with this thread! 
 
 
I even bought a ASRock H170M-ITX/ac because I had so much faith in the quality of your work.
Everything is working as a charm, even the glitches are solved.
Sound, USB, video, ...
 

 

Again, many thanks for all you help!

Share this post


Link to post
Share on other sites

 

 
Hi Denicio,
 
I want to give you big thumbs up, I think it's unbelievable what you did with this thread! 
 
 
 
I even bought a ASRock H170M-ITX/ac because I had so much faith in the quality of your work.
Everything is working as a charm, even the glitches are solved.
Sound, USB, video, ...
 

 

Again, many thanks for all you help!

 

 

Hey DutchAcerOne, thank you very much for your feedback, it's greatly appreciated. Indeed, it's a wonderful motherboard for the money, and performs excellent if you get it right :)

 

If you need anything else I'll be around.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (November 2019) Updated to Clover r5099 Updated Lilu based kexts - Lilu, ALC, WEG Added acidanthera VoodooPS2 kext v2.0.4 moved the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Aldaro
      Gigabyte, in their infinite wisdom, decided to remove the option to disable serial ports, and not being able to do so has been causing me some problems. I know that I have to either use a patch in clover, or create a custom SSDT to disable super I/O, but I honestly do not know how to go about doing this. One of the weirder problems I'm experiencing is the inability to connect to Apple Music (error 11556) unless I go into my network settings, and delete my serial connection. If anyone could help me out with this, that'd be greatly appreciated; anyway, thank you for taking the time to read this.
       
      SPECS:
      Mobo GIGABYTE Z390 M GAMING (UEFI F8)
      CPU: i5 9600k
      RAM: 32GB DDR4 @ 2666 Mhz
      GPU: AMD Radeon RX 580 w/ 8GB of VRAM (MSI armor oc edition)
      Storage Samsung 970 evo 500GB
    • By cvad
      View File Bootdisk Utility
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
    • By e97
      HackPro X99 System
      Until Apple blesses us with the MacPro7,1 – this is for those that require tools to do their work.
      An appropriate bicycle for the mind.
       
       

       

       

       
      Specs:
       
      CPU: Intel Xeon E5-2678 v3 (12 core, 2.5 GHz / 3.3 GHz Boost)
      Motherboard: SZMZ X99-8D3
      RAM: 16GB DDR3-14900R 1866Mhz ECC RDIMM modules
      GPU: Radeon RX Vega 64 8GB
      Storage: Phison E12 m.2 NVMe PCI-E 3.0 x4 SSD
      Water blocks: BARROW CPU + GPU
      Radiator: 360mm x 25mm slim
      Pump: DDC
       
      Case dimensions: 431 mm x 342 mm x 177 mm
       
       
       
      XCPM OFF
       

       
      XCPM ON
       

       
      OpenCL
       

       
       
       
      iMacPro1,1
       

       
       

       
      OpenCL
       

       
       
      NVMe
       

       
       
      Win 10 x64 v1809
       
      AIDA64 - Cache & Memory
       

       
       
      Download:  https://github.com/xe97/X99-8D3-Clover
       
       
       
       
       
      Anyone else I forgot
       
       
    • By digivish
      Hi All - quick thing - I have a NUC 8i7BEH with 32GB RAM and 2 x 1TB SSD drives. Each drive has its own OS - Windows 10 and Catalina 10.15.
       
      Clover works well - Catalina Boots, so does Windows.
      Catalina - has sound over HDMI (to my monitor's speakers)
      Windows - no audio device found - It does show Realtek and Intel Display Drivers - but the speaker has a red"x" and in Devices, there is no entry for Microphone Array under Audio Input/Output. It does, however, show Intel display over the HDMI - but actually no sound.
       
      I have tried reinstalling Realtek drivers - now here's the thing...when it installs, it first uninstalls existing Realtek drivers - at this stage (and it's important) the sound starts working - as if uninstalling did the trick. As part of the installing, I have to reboot and upon reboot, it actually reinstalls the Realtek drivers. After that, I'm back to square 1. Unsure if it's the config.plist or boot args in clover. But something with Clover for sure.
       
      I have tested this by removing the Mac Drive with clover and just booting directly to Windows 10 bootloader and everything works as it should, I have sound over HDMI and the audio device shows. Just not when I boot with Clover.
       
      has anyone experienced this and have thoughts or pointers.
       
      Thanks a ton!
×