Recently Browsing 0 members
No registered users viewing this page.
All work 10.10, 10.11, 10,12
camera not work in 10.13, 10.14
You need SwitchResX that the screen does not freeze
Custom resolutions: Back porch - lines change to 2
UEFI boot moded bios https://github.com/Thiblizz/l502x-modded-bios
For 10.14 you need: HD3000 Fix for Mojave.zip
Installed in S/L/E
SMBIOS: MacbookPro 8.3 or MacbookPro 9.1
CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE
INCLUDES MBR / LEGACY BIOS TO GPT / EFI CONVERSION
USING MBR2GPT TOOL
PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
STEP 1 - Clover dual boot configuration
Open config.plist with Clover Configurator
Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)
Scan / Custom
Entries = True Tool = True Legacy = False ( removes extra Windows 10 entries )
- Preboot ( macOS Preboot )
- Recovery ( macOS Recovery )
So at boot you will have two options: boot macOS Mojave or Windows 10
STEP 2 - Using a drive without Windows 10 installed
Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
Proceed with a Windows 10 UEFI install.
After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover.
If Windows 10 is not detected or able to boot, then verify you installed Windows 10 as UEFI and not MBR ----> ( Read step 2 - For a drive with Windows 10 installed )
STEP 2 - Using a drive with Windows 10 already installed
Verify your Windows install is GPT / UEFI or MBR / Legacy BIOS.
If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen.
But if Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
then this is most likely because Windows drive is MBR ( Legacy BIOS ). You can easily convert MBR to GPT using Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again )
If Windows 10 install is MBR / Legacy BIOS then simply convert to GPT / UEFI following instructions below ( read video summary and view video )
** To use Windows 10 MBR2GPT tool you must have Windows 10 version 1703 ( creators update ) or later and less than 3 partitions on
the Windows 10 drive **
Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )
After conversion Windows 10 is ready to use at the Clover boot menu
I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
"could not recover SATA HDD after 5 attempts, terminating"
And some other warnings afterwards.
CPU: Intel Skylake 6700HQ 2.6GHz
RAM: 16GB DDR4
2TB HDD + 128GB SSD
GPU: Intel HD Graphics 530 + Nvidia GTX960m
I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
I uploaded the verbose log and clover config.plist
GigaByte Z390 M Gaming
Intel Core i9-9900K
CoolerMaster MasterLiquid ML120R RGB
Corsair Dominator Platinum 16GB (2 x 8GB)
Sapphiretech Radeon RX 590 8 GB GDDR5
Samsung 970 EVO NVMe M2 Flash Drive
EVGA 750 N1, 750W
TP-Link Archer T9E
Thermaltake View 21 Tempered Glass Edition
-FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES
--USB-C-- test with SanDisk Ultra USB-STICK 128gb
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
We're all here to have fun and learn from each other!
Budget Workstation MacOS 10.14.1 build: z370 AORUS Gaming 5 - i5-8600K - RX 580 - UHD 630
flawless iGPU/dGPU integration, fast FCPX editing/rendering, great overall performance for ~$1200 / ~£1000
Update: updated WhateverGreen and Lilu, then updated OS to 10.14.3 and everything is fine! Even iMessage, which previously I hadn't been able to make work, is now working - possibly the update flushed the NVRAM?
I'm gonna come straight out and admit it - I used newb tools which are considered taboo on InsanelyMac, and so this isn't so much an installation guide as it is a green flag to anyone considering the same hardware. My first and previous Hackintosh project was just over ten years ago and this site was massively helpful, so this is my (very small) way of giving back.
CPU: Intel i5-8600K 3.6GHz hexacore (contains UHD 630 iGPU)
CPU Cooler: be quiet! Pure Rock Slim (no paste needed, and fan facing front)
Mobo: GIGABYTE z370 AORUS Gaming 5 (WIFI)
RAM: 1x 8GB CORSAIR Vengeance LPX C16 2666MHz (in first slot)
GFX Card: Sapphire RX 580 NITRO+ SE
SATA: used ports 0, 1, 3, 5 (HDD problems when connected to port 4)
DVD Drive: generic
PSU: EVGA 500W Semi Modular (but you should get 650W!)
Case: CoolerMaster CM590 III
Fans: 2x stock case fans (one sucky on front, one blowy on back), 3x be quiet! BL046 120mm fans (two blowy on top, one sucky on front). Airflow near-perfectly balanced.
With the Clover configuration, you want to pay close attention to all things relating to graphics. There are some specific settings for ACPI, Boot, Devices and Graphics which should be copied exactly in order to get the iGPU and dGPU to work in perfect harmony. For instance, make sure you use ig-platform-id 59120003 rather than 59120000 if you want FCPX to be usable. With the right settings, FCPX will not only run, but run flawlessly.
I was not able to figure out how to make NVRAM/PRAM behave itself, and I got errors when I tried to issue relevant commands. As a result, I could not at first get iMessage to work properly. It worked once on my first installation attempt but not from subsequent attempts. This Clover configuration therefore has no consideration whatsoever toward iMessage reliability - however, iMessage ended up working somehow, anyway - I noticed it after I'd updated to 10.14.3 but this may just have been coincidence.
Onboard WiFi does not work. There is no driver for it. I'm using wired ethernet to a bridge router as it was cheaper than getting a compatible PCI card.
Audio is working well after I installed the z370 audio patch, then the ALC1220 codecs, then AppleALC.
With kexts for generic 3rd party SATA and generic 3rd party eSATA, my HDDs and DVD drive work perfectly well.
Sleep/Wake functions run perfectly. iCloud functions run perfectly. Shutdown leaves the mobo LEDs on, annoyingly.
My USB 3 ports seem to suffer from low power output, and I don't know why.
Overall, this system appears to run about as well under MacOS 10.14 Mojave as it does under Windows 7. I would solidly recommend this build to anyone looking to build a computer for workstation purposes, on a budget.