Jump to content
Sign in to follow this  
Followers 0
marcosviniciusf17

Hackintosh HP Pavilion 14 v066BR 90% funcional

4 posts in this topic

Recommended Posts

Ola pessoal estou trabalhando no meu HP Pavilion já faz um tempo, tive auxilio aqui do forum para resolver uns problemas.

Agora estou de volta para ver a opinião de vcs se existe mais alguma mudança a se fazer nele. 

Sua configuração é esta:

Notebook HP Pavilion 14 v066BR

- Placa mãe: HP Insyde Bios F.42
- Processador: Intel i7-4510u @ 3.1 GHz (Haswell-ULT)
- Memória RAM: 2x8Gb 1600 MHz Dual Channel
- Placa de vídeo integrada: Intel HD Graphics 4400 (GT2)
- Placa de vídeo dedicada: Nvidia Geforce 840M (Maxwell-GM108) (Desativada na DSDT/SSDT)
- Monitor Genérico PnP [NoDB] 1366x768 @ 60Hz
- Placa de áudio: Intel Lynx Point-LP PCH - High Definition Audio Controller (Realtek ALC290)
- Placa de rede: Realtek RTL8139/810x Fast Ethernet Adapter
- Placa wireless / bluetooth: Intel Dual Band Wireless-AC 3160 802.11ac 1x1 WiFi + BT 4.0 Comb (Não funciona então estou juntando dinheiro para trocá-la pela Broadcom BCM94352hmb, aparentemente compatível mas ainda tem as whitelist na bios da HP)
- Controladora IDE: Intel® 8 Series Chipset Family SATA AHCI Controller
- Disco rígido: Seagate ST1000LM024 HN-M101MBB (1 MB, 5400 RPM, SATA-II)
- Drive Óptico: hp DVDRW SU208GB
- Touchpad: Alps Pointing-device (Não funciona o multitouch, versão Alps não suportada no momento pelas kexts atuais)
- Webcam: HP Truevision HD
- 1 Porta HDMI
- 1 USB Intel Lynx Point-LP PCH EHCI 2.0
- 2 USB Intel Lynx Point-LP PCH xHCI 3.0
- 1 Mini-jack para headphones
- D-Link Wireless N Nano USB Adapter (DWA-131 Rev.E) (Só até arrumar a placa wireless+bluetoth, atrapalha a suspensão muito chato)

 

Se alguém souber se a Broadcom BCM94352hmb é compatível nas whitelist já é um começo kk . Mas vou ligar na HP ainda. O touchpad não é suportado enato funciona na emulação de mouse. Mas enfim só não funciona mesmo a GPU Nvidia, as funções multitouch e a placa wireless. 

 

No demais só fica aparecendo no boot "Waiting for DSMOS", "DSMOS has arrived" e "hmm.. mismatch sizes 3100 vs 20". Este ultimo fiz de tudo e não resolveu. O DSMOS baixei a ultima versão do FakeSMC, até agora não deu problema no boot.

 

De patches eu usei estes:

 

SSDT: Gerada pelo script ssdtPRGen

 

DSDT:  SMBus Fix - HPET Fix - RTC Fix - IRQ Fix - LPC Haswell - Add MCHC/IMEI - Battery Pavilion n012tx -  - Áudio Layout ID 3 - USB 8 series - USB3 (PRW0x06D) - Rename to EH01 - Replace names - Rename to HDAU/IGPU - Disable from REG (RP05) 

 

SSDT-3 : Cleanup/Fix - PNLF Haswell - Rename to HDAU/IGPU -  - Graphics HD 4600 (Rename HD4400)

 

SSDT-4 : Cleanup/Fix Replace names - Rename to IGPU - Disable from INI (RP05)

 

SSDT-5 : Replace names - Rename to IGPU

 

SSDT-0-1-2-6-7-8: Rename to IGPU

 

Estou deixando os relatórios do Darwin Dumper e config do clover. Agradeço a ajuda de tds.

Notebook HP Pavilion 14 v066BR.zip

Share this post


Link to post
Share on other sites
Advertisement

Sobre a BCM94352hmb já tentou isso?

https://github.com/toleda/wireless_half-mini

Ainda não tentei, ma já é bom esses patches em mãos. No momento estou pesquisando para ver se a bcm94352hmb é compativel. Hoje vou ligar na HP e vejo se tenho resposta. Infelizmente não encontro os manuais que dão essa informação, só de outros modelos. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Grim Reaper
      Anyone know if OSX can be installed on this? I have searched for information about installing OSX on it and found nothing. 
       
      I just got an HP ENVY Phoenix 860-019 desktop for a very low price, $100 CDN without any hard drives or add-on graphics card. It has an I7-6700 3.4GHz processor, integrated Intel graphics 530, 16GB DDR4 memory. It has only two PCIE expansion slots, one PCIE 16 for a graphics card and a PCIE 1x. It is now running Windows 10 on a 3TB drive. I have an old Radeon HD6450 which will operate with it with the bios set to legacy boot (it won't with the bios set to secure boot).
       
      Any information about installing OSX Mojave on this computer is very much appreciated.
    • By grisno
      macOS driver installer for laptop HP Pavilion G6-2209SS with support for dual boot Bootloader. Maybe it can be installed on other HP Pavillion G6 series laptops, but in some cases additional fixes will have to be made.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      CPU : OK Intel Core i3-2370M AUDIO : OK IDT 92HD87B2/4 (111d:76d9) Layer 3 & 12 (Speakers+Hearphones+LineIn+MicInt w/NoiseFilter+MicExt+HDMI) VIDEO : OK Intel HD Graphics 3000 (8086:0116) (LVDS + HDMI A/V + VGA) (VGA MacOS < 10.8.2) MEMORY : OK Intel 2nd Generation Core Proccesor DRAM Controller (8086:0104) (Dual Channel DDR3 Up To 16GB) SATA : OK Intel 7 Series Chipset Family SATA Controller (8086:1e03) (ACHI Mode) DVD : OK (Read & Write) USB 2.0 : OK Intel 7/C216 Chipset Family USB Enhaced Host Controller (8086:1e26 & 8086:1e2d) USB 3.0 : OK Intel 7/C216 Chipset Family USB xHCI Host Controller (08086:1e31) WEBCAM : OK HP TrueVision HD (SuYin) (064e:e263) [USB 2.0] KEYBOARD : OK PS/2 TRACKPAD : OK PS/2 Synaptics LAN : OK Realtek RTL8501E Fast/Gigabyte Ethernet Controller PCI Express (10ec:103c) * AIRPORT : KO MediaTek RT3290 PCI Express (1814:3290) (Not Supported) BLUETOOTH : KO MediaTek RT3290 PCI Express (1814:3298) (Not Supported) CREADER : OK Realtek RTS5229 PCI Express (10ec:5229) (10.12.5+) *** ACPI BAT : OK (Chameleon & Clover) ACPI PWR : OK (Chameleon & Clover) ACPI RST : OK (Chameleon & Clover) ACPI SLP : OK (Chameleon & Clover) ** ACPI WAK : OK (Chameleon & Clover) ** HIBERNATE : OK (Only Clover Bootloader w/Hibernatemode: 0, 21 & 29) IMESSAGE : OK (Chameleon & Clover) FACETIME : OK (Chameleon & Clover) ICLOUD : OK (Chameleon & Clover) APPSTORE : OK (Chameleon & Clover) ITUNES : OK (A/V DRM Content & Sync iPod/iPhone) SIRI : OK CMOS : OK RTC : OK LPC : OK Intel HM76 Express LPC Controller (8086:1e44) SMBUS : OK Intel 7/C216 Chipset Family SMBus Controller (8086:1e22) IMEI : OK Intel 7/C216 Chipset Family MEI Controller (8086:131a) GPT PART. : OK (Chameleon & Clover) (10.13+ APFS Not Tested) MBR PART. : Not Tested   Known Issues:
       
      - AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT. *
      - AppleRTL8169Ethernet: only work to 10Mbits. *
      - You can't wake up the system when the laptop uses the battery and the system disk is a USB hard drive. **
      - You can't wake up the system from PS/2 Keyboard/Trackpad. **
      - The Wifi MediaTek RT3290 (1814:3290) device are not supported.
      - The Bluetooth MediaTek RT3290 (1814:3298) device are not supported.
      - The PCIe CardReader Realtek RTS5229 (10ec:5229) device are not supported. *** (10.12.5-)
      - Stop working when sleep with inserted card. *** (10.12.5+)
      - Chameleon Bootloader Not Work Properly With macOS Mojave
       
      Coming soon:
       
      - Installer: Create unified installer for all Mac OS versions
      - Manual: How To Install Wifi Card Blacklisted In HP UEFI BIOS
      - Manual: How To Install OSX Without Destroying Windows 8.x Partition
      - Driver: VirtualSMC Support
    • By grisno
      Hi people,
       
      This is a preliminary MacOS driver installer for laptop HP Pavilion 15-D002SS with support for dual boot Bootloader. Maybe it can be installed on other HP Pavillion 15 series laptops, but in some cases additional fixes will have to be made.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      CPU : OK Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz AUDIO : OK Realtek ALC282 (10ec:0282) Layer 1 & 3 (Speakers+Hearphones+MicInt[w/NoiseFilter]+HDMI) VIDEO : OK Intel HD Graphics 4000 (8086:0166) (LVDS + HDMI A/V) MEMORY : OK Intel Corp. 3rd Gen Core processor DRAM Controller (8086:0154) (Dual Channel DDR3 Up To 16GB) SATA : OK Intel Corp. 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (8086:1e03) DVD : OK HP DVDRAM GU90N (Read & Write) USB 2.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (8086:1e26) USB 2.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (8086:1e2d) USB 3.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB xHCI Host Controller (08086:1e31) WEBCAM : OK HP TrueVision HD USB 2.0 UVC KEYBOARD : OK PS/2 TRACKPAD : OK PS/2 Synaptics LAN : OK Realtek RTL8101E PCI Express Fast Ethernet controller (10ec:8136) AIRPORT : OK Atheros QCWB335 (AR9565) PCI Express (168c:0036) (10.10.0+) ** BLUETOOTH : OK Atheros AR3012 USB 2.0 (0cf3:3121) (10.11.x+) *** CREADER : OK Realtek RTS5229 PCI Express (10ec:5229) (10.12.5+) **** ACPI BAT : OK (Chameleon & Clover)ACPI PWR : OK (Chameleon & Clover) ACPI RST : OK (Chameleon & Clover)ACPI SLP : OK (Chameleon & Clover) * ACPI WAK : OK (Chameleon & Clover) *ACPI FAN : KO (Chameleon & Clover) * HIBERNATE : OK (Only Clover Bootloader w/Hibernatemode: 0, 21 & 29) ***** IMESSAGE : OK (Chameleon & Clover)FACETIME : OK (Chameleon & Clover) ICLOUD : OK (Chameleon & Clover)APPSTORE : OK (Chameleon & Clover) ITUNES : OK (A/V DRM Content & Sync iPod/iPhone) SIRI : OK CMOS : OK RTC : OK LPC : OK Intel Corp. HM76 Express Chipset LPC Controller (8086:1e59) SMBUS : OK Intel Corp. 7 Series/C210 Series Chipset Family SMBus Controller (8086:1e22) IMEI : OK Intel Corp. 7 Series/C210 Series Chipset Family MEI Controller (8086:1e3a) GPT PART. : OK Chameleon & Clover) (10.13+ APFS Not Tested) MBR PART. : Not Tested   Known Issues:
       
      - Can't wake up the system when the laptop uses the battery and the system disk is a USB hard drive *
      - Can't wake up the system from PS/2 Keyboard/Trackpad *
      - Partial support with a maximum speed of 10Mbits (10.11.0+) **
      - Don't support the poweroff/on by software (10.10.0+) ***
      - WID driver with incomplete powermanager support (10.12.5+) ****
      - Stop working after wakeup from sleep with inserted SDCard (10.12.5+) ****
      - Don't work properly hibernatemode 21 & 29 (10.12.0+) *****
       
      Coming Soon:
       
      - Support ACPI FAN RPM
      - Create unified installer for all Mac OS versions
      - macOS Mojave Support
×