Jump to content
dbonyad

Boot camp error -- cannot install Windows 10

4 posts in this topic

Recommended Posts

Hi,

 

I have a new 2016 iMac 5k 27", so it's got a fresh install of El Capitan. I have a fusion drive with 128GB flash and another standard hard drive.

 

I'm trying to use Boot Camp to install Windows 10. I have a Windows install USB, which Boot Camp detects and accepts, but every time it goes to format the hard drive for the windows install, it fails. This error is shown. This happens when trying to format either hard drive, the SSD or the HDD.

 

Your disk could not be partitioned. An error occurred while partitioning the disk.

 

I have tried all the online help about repairing the disk using Disk Utility and doing /sbin/fsck -fy in single user mode, but it makes no difference. The disk is not damaged, it's brand new!

 

NB: the error occurs only a few seconds into the disk formatting progress.

 

The only thing that I've changed on my iMac is that I've split my fusion drive into two individual hard drives (the SSD and the standard HDD) using these steps. This might be the cause of the issue, but it might not have any effect, I don't know. Even if it is causing it, there must be a work around -- I want to be able to control what I put on each hard drive myself.

 

Is there a work around for this?

iMac (Retina 5K, 27-inch, Late 2015), OS X El Capitan (10.11.3)

Share this post


Link to post
Share on other sites
Advertisement

Hi,

 

I have a new 2016 iMac 5k 27", so it's got a fresh install of El Capitan. I have a fusion drive with 128GB flash and another standard hard drive.

 

I'm trying to use Boot Camp to install Windows 10. I have a Windows install USB, which Boot Camp detects and accepts, but every time it goes to format the hard drive for the windows install, it fails. This error is shown. This happens when trying to format either hard drive, the SSD or the HDD.

 

Your disk could not be partitioned. An error occurred while partitioning the disk.

 

I have tried all the online help about repairing the disk using Disk Utility and doing /sbin/fsck -fy in single user mode, but it makes no difference. The disk is not damaged, it's brand new!

 

NB: the error occurs only a few seconds into the disk formatting progress.

 

The only thing that I've changed on my iMac is that I've split my fusion drive into two individual hard drives (the SSD and the standard HDD) using these steps. This might be the cause of the issue, but it might not have any effect, I don't know. Even if it is causing it, there must be a work around -- I want to be able to control what I put on each hard drive myself.

 

Is there a work around for this?

iMac (Retina 5K, 27-inch, Late 2015), OS X El Capitan (10.11.3)

I don't think the bootcamp is supported on fusion drives, but I may be wrong though...

 

Edit:

If so, you could manually format and shrink your partition and format it in disk utility as MSDOS and boot your iMac with holding on alt/option button and insert your bootable windows medium to install it on that reserved MSDOS partition.

Share this post


Link to post
Share on other sites

Thanks for the reply!

 

I believe Boot Camp is supported, or it should work according to the help files...

 

I've tried installing Windows manually as you suggest, and the formatting bit works fine, it's just that the Windows installation itself always results in an error. I think there's something on the newer Macs to prevent Windows from being installed manually. So I think I have to go with Boot Camp.

 

Does anyone have any ideas around fixing Boot Camp?

 

Thanks.

Share this post


Link to post
Share on other sites

Thanks for the reply!

 

I believe Boot Camp is supported, or it should work according to the help files...

 

I've tried installing Windows manually as you suggest, and the formatting bit works fine, it's just that the Windows installation itself always results in an error. I think there's something on the newer Macs to prevent Windows from being installed manually. So I think I have to go with Boot Camp.

 

Does anyone have any ideas around fixing Boot Camp?

 

Thanks.

The procedure should work, as long as you have a bootable UEFI windows medium... Search for how to create it for UEFI and try with it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host
      Following on from my previous guide on how to create a VMware virtual machine running Vanilla OS X El Capitan in Windows, I’ve decided to write a similar guide for creating a VirtualBox El Capitan VM. 
       
      The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are other tutorials and videos on the net about running OS X on Windows machines using pre-made VMDK disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from several threads in the Multibooting and Virtualisation section of this forum and also the wider internet eg
       
      @colt2 HOW TO: Create a bootable El Capitan ISO for VMware
      @dsmccombs comment on faking Ivybridge Processor
      @E:V:A http://forum.xda-developers.com/showpost.php?p=55572430&postcount=6
      @Tech Reviews video tutorial https://www.youtube.com/watch?v=t7X07U63lwg.
      VirtualBox Forum: Status of OSX on OSX
       
      Requirements
         Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X)    4GB or more RAM (2GB or more will be needed for OS X)    Hard Disk with at least 40GB free for Virtual Machine    Oracle VM VirtualBox v 5.0.34    Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#75    16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC  
      Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes.  Note: you will need approx 16GB of free space on your hard disk for the script to complete.
       
       
       
      3.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 4.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
       
      Create an El Capitan Virtual Machine in VirtualBox
      1.  Open the VirtualBox program and click the "New" button to create a new VM.
       

       
      2.  Select Mac OS X and Mac OS X 10.11 El Capitan (64 -bit) for Operating System type and version.  I named my Virtual Machine "El_Capitan", then clicked next...
       

       
      3.  Leave the Memory size at the recommended 2048 MB, then click next.
       

       
      4.  Choose to "Create a virtual hard disk now", then click the create button.
       

       
      5.  For the hard disk file type, the default is VDI (VirtualBox Disk Image) but I have selected VMDK for inter-operability with VMWare.  Click next...
       

       
      6.  For Storage on physical hard disk, I have chosen the default Dynamically allocated (grows larger to a set limit as you need more disk space).
       

       
      7.  On the File location and size screen, you can set the location of the new virtual hard disk and its size - I recommend changing disk size to 40GB or larger.  When you click the create button, you will now see your new VM in the VirtualBox main GUI.
       

       
      8.  Click the settings button on the Main Menu to tweak a few settings....
         a.  On the System/Motherboard tab in Boot Order, you can uncheck the Floppy Drive (who has these now?)
       

       
         b.  On the System/Processor tab, you can increase the allocated CPU cores to 2
       

       
         c.  On the Display tab, you can increase the allocated Video Memory to 128MB
       

       
         d.  On the Storage tab, click on the icon of the Optical Drive and select "Choose Virtual Optical Disk File". 
       

       
      Navigate and select the El Capitan ISO we created earlier...
       

       
         e.  Click the OK button to finalise the VM settings.
       
       
      Patch El Capitan vbox configuration file with DMI Settings from a Mac
      1.  From the start menu, type cmd and click run as administrator to open an administrative command prompt. 
       

       
      2.  Choose a Mac Model similar to your host system, then type the following lines, followed by <enter>  after each line.  Make sure you first close all VirtualBox Windows and the VirtualBox program, otherwise any changes you make won't stick...
       
      Eg iMac11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F2238BAE" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 MacBookPro11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "MacBookPro11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-2BD1B31983FE1663" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 Macmini6,2
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "Macmini6,2" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F65AE981FFA204ED" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 3.  Optional- For some host systems eg those with Haswell and newer CPUs, you might have to spoof an older CPU to avoid VirtualBox errors.  You can try from one of the following if this happens:

      To spoof Lynnfield i5 750 CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000106e5 06100800 0098e3fd bfebfbff To spoof IvyBridge CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 04100800 7fbae3ff bfebfbff or
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 00020800 80000201 178bfbff 4.  Close the command prompt window.
       
       
      Installation of El Capitan
      We are now ready to start the El_Capitan Virtual Machine....
       



       
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

       
      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I named my drive "Macintosh HD" but you can enter whatever you like eg El_Capitan.
       

       
      3.  Quit DU and choose Macintosh HD to install El Capitan on.
      4.  After 20-30 min (depending on how fast your system is), the installation will complete.  At this point, unmount the El Capitan ISO by clicking the Devices menu from the VM window, click Optical Drives, then choose Remove disk from virtual drive.  The VM is now ready to reboot into OS X from the virtual hard drive.
      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
      7.  Finally, you will arrive at the El Capitan Desktop.
       

       
      8.  Network/internet and audio should work OOB but on my system, the sounds were distorted.  Unfortunately, there is no QE/CI and the VM resolution will be fixed without the ability to dynamically resize the VM window (no VirtualBox additions for OS X guests atm). 
       
       
      Customization with VBoxManage
      1.  You can change the default resolution of 1024*768 (after shutting down the VM) with the VBoxManage command from the Windows Administrative Command Prompt:
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" VBoxInternal2/EfiGopMode N (Where N can be one of 0,1,2,3,4,5) referring to the 640x480, 800x600, 1024x768, 1280x1024, 1440x900, 1920x1200 screen resolution respectively.
       
      Update:  For VirtualBox 5.2.x, the command for changing screen resolution has changed...
       
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution XxY (where X=Horizontal screen resolution, Y=Vertical screen resolution)
      eg
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution 1280x1024 2.  Adding serials and other SMBIOS details for the System Information Screen
      VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemSerial" "W8#######B6" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardSerial" "W8#########1A" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVendor" "Apple Inc." VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemFamily" "iMac" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion" "IM112.0057.03B" A listing of known issues with Mac OS X guests can be found in the VirtualBox Manual - link https://www.virtualbox.org/manual/ch14.html.
       
      Vanilla Mavericks and Yosemite, Snow Leopard from Retail DVD
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Finally, those without a Mac/Hack to prepare the install media can purchase a retail Snow Leopard DVD directly from Apple and install OSX 10.6.3 on their virtual machines (Snow Leopard, Lion and Mountain Lion run quite happily in VirtualBox with 1 CPU, 1-2 GB of RAM and the rest of the settings unchanged from above).  Once you update by combo update to SL 10.6.8, you can directly download El Capitan from the App Store for free .
       

       
      UPDATE macOS Sierra 10.12 to 10.12.6: For macOS Sierra, use CSI.tool in post#51.
      UPDATE macOS High Sierra 17A365:  For macOS High Sierra, use CHSI.tool in post#73.
      UPDATE macOS Mojave Beta:  For macOS Mojave Beta, use CMJI.tool on page 4 of thread.
       
      Good luck and enjoy
      CECI.tool.zip
      CYI.tool.zip
      CMI.tool.zip
    • By fusion71au
      Making a High Sierra USB Installer Entirely From Scratch in Windows
      This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ).  @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
       

      Pre-Requisites
      8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
      1)  Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)

      to a folder named "SharedSupport" on your Windows NTFS drive.  A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...

      2)  Rename InstallESDDmg.pkg to InstallESD.dmg
      3)  Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
      Note:  You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
      Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
      1.  Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
      2.  Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
      3.  Restore 4.hfs to USB second partition with BDU --->  2nd partition becomes bootable "OS X Base System"
      Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
      Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed.  Don't forget to apply the changes at the end...
      Transmac to Copy "SharedSupport" folder to OS X Base System
      1.  Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder.  Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
      2.  In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
      Clover Settings
      Clover configuration is required now.  The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky.  If not, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
      The location of the important configuration files for Clover are summarized below
      config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here.  You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware).  In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine.  Reboot the system to the USB installer to install High Sierra ...
      What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
      Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app.  In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
      -bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/  
      ...then start installation with the startosinstall utility...
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app  
      The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume.  Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
      cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14beta
      Browse Apple's Public Beta Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist  
      startosinstall.command.zip
       
      InstallInfo.plist_edited_10.14beta1.zip
      InstallInfo.plist_edited_10.13.6.zip
    • By fantomas1
      hi people  
       
      you can use this thread to link / talk about of the future Nvidia Web Driver updates for El Capitan
       
      10.11.6
      Nvidia Web Driver - 346.03.15f16 --> build 15G22010 (thanks to BreBo)  New!
      Nvidia Web Driver - 346.03.15f15 --> build 15G21013 (thanks to BreBo) 
      Nvidia Web Driver - 346.03.15f14 --> build 15G20015 (thanks to DMCrimson)
      Nvidia Web Driver - 346.03.15f13 --> build 15G20015 (thanks to Louvier)
      Nvidia Web Driver - 346.03.15f12 --> build 15G19009 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f11 --> build 15G18013 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f10 --> build 15G17023 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f09 --> build 15G1611 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f08 --> build 15G1510 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f07 --> build 15G1421 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f06 --> build 15G1217 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f05 --> build 15G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f04 --> build 15G1108 (see this post)
      Nvidia Web Driver - 346.03.15f03 --> build 15G1004 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f02 --> build 15G31 (thanks to Moviemakergr)
      Nvidia Web Driver - 346.03.15f01 --> build 15G31 (thanks to WeBeRiO)
      [uPDATE_3]Nvidia Web Driver - 346.03.15b01 --> build 15G24b (thanks to DMCrimson)
       
      10.11.5
      Nvidia Web Driver - 346.03.10f02 --> build 15F34 (thanks to marcozardi)
      Nvidia Web Driver - 346.03.10f01 --> build 15F34 (thanks to WeBeRiO)
      [uPDATE_2] Nvidia Web Driver - 346.03.10b01 --> build 15F31a (see this post)
       
      10.11.4
      Nvidia Web Driver - 346.03.06f01 --> build 15E65 (see this post)
      Nvidia Web Driver - 346.03.06b01 --> build 15E (see this post)
       
      10.11.3
      Nvidia Web Driver - 346.03.05f02 --> second release for build 15D21 (thanks to Fljagd)
      Nvidia Web Driver - 346.03.05f01  --> build 15D21 (see this post)
      Nvidia Web Driver - 346.03.05b02 --> build 15D (see this post)
       
      10.11.2
      Nvidia Web Driver - 346.03.04f02 --> second public release (see this post)
      Nvidia Web Driver - 346.03.04f01 --> build 15C50 (see this post)  
      Nvidia Web Driver - 346.03.04b02 --> build 15C48a (see this post) 
      Nvidia Web Driver - 346.03.04b01 --> build 15C47a (see this post)
       
      10.11.1
      Nvidia Web Driver - 346.03.03f02 --> second public release (see this post) 
      Nvidia Web Driver - 346.03.03f01 --> build 15B42 (thanks to jperkins909)
       
      10.11.0
      Nvidia Web Driver - 346.03.02f02 --> build 15A284 (thanks to MTWomg)
      Nvidia Web Driver - 346.03.02f01 --> build 15A284 (see this post)
       
      DP
      Nvidia Web Driver - 346.03.01b07 --> GM/DB/PB6/DB7/PB5 (thanks to BreBo) 
      Nvidia Web Driver - 346.03.01b06 --> build 15A (thanks to MTWomg) 
    • By Ganesh1990
      Hi,
       
      Can Anyone suggest how to disable USB mass Storage in High Sierra, iam currently running 10.12.6 version, 
      I have Tried the Following steps which came across search in google, 
      I Have deleted,
      IOUSBMassStorageClass.kext
      IOUSBMassStorageDriver.kext
      from /System/Library/Extensions folder and tried 
      sudo touch /System/Library/Extensions
      But still My USB Pendrive is detecting.
      Can anyone please help me...
    • By bojarek8
      Hello Gentlemens
       
      I am asking you with a great request for help with a problem I can not deal with. 
      I hope I have chosen a good section on this topic
       
      I have been using my Hackintosh for some time now 
      it does not cause me any more problems except for the one that irritates me
       
      My problem: 
       
      the system does not recognize my monitor and detects it as a 
      monitor monitor VGA
      13,9'' (800 x 600)
      Gigabyte GeForce 9600 GT 512  MB
       
       
      My monitor model: LG Flatron W2243S 
       

       
       
      As you can see in the attached picture, the system does not recognize the monitor as a built-in screen
       
      My main problem is that when the screen resolution is set to 1920x1080, black bars appear on the sides of the screen
      It is not very comfortable, that's why I would like to change it and make the image look the whole width of the monitor
      The monitor is connected to the graphics card with an adapter from the VGA connector to the DVI connector
       
      this is my conifig.plist 
      https://drive.google.com/open?id=1kBoGpfR8ooGAm-Y9C8Qu7rZetDWI8t6w
       
       
       
      I hope that I described my problem in a comprehensible way, thank you very much for your help  
       
       
×