Buonasera, sono nuovo nel forum ho mandato a buon fine con l'aiuto di alcuni ragazzi il mio primo Hackintosh su ASUS x556u, il post installazione sembra essere buono. La scheda WI-FI non è riconosciuta (ho una Qualcomm QCA9377) non siamo riusciti a trovare dei Kext per farla funzionare, ho provveduto ad ordinarne una sperando di non avere problemi con la prossima configurazione. I problemi più grossi che sono sorti sono principalmente 3 ad ora di cui mi sono accorto.
1) Non funziona lo Splee-and-Wake (se così posso definirlo) quando faccio stop o chiudo il monitor, alla riapertura ho una schermata nera o con il solo cursore che si muove, devo quindi riavviare manualmente.
2) Ho il problema dello status battery, non mi viene riconosciuta come carica ma costantemente a 0% anche sotto carica(viene notificato solo questo nell'cona)
3) Il touchpad funziona un po' per i fatti suoi, posso solo muovere e cliccare. Una volta mosso se non ci clicco dopo continua a "camminare" verso l'ultima direzione, non funziona lo scroll con due dita.
Spero di aver spiegato nel miglior modo possibile in attesa di una risposta. Grazie anticipatamente
I have a Kingston HyperX Predator PCIE-SSD (model: SHPM2280P2H) matched with an X58 motherboard (legacy bios). The card has a Marvell 88SS9293 controller with an Option ROM which allows it to be detected on my motherboard as a bootable drive - listed as "IDE: Kingston SHPM". As my BIOS is non-UEFI, I assume the Option ROM presents it in IDE mode instead of AHCI.
I use Clover legacy with BiosBlockIO to get around this, and it works well - Clover detects my drive and allows me to install macOS onto it and use it as a boot drive. macOS detects the drive correctly as a SATA AHCI drive. I guess Clover correctly detects (configures?) the Option ROM into AHCI mode and presents it as such to macOS - getting full speed read Read/Write performance. All is well.
Except waking from sleep. When waking from sleep, depending on clover config options + dsdt, I either get an immediate reboot or hang on black screen that requires hard reset. I eventually realised that nothing after entering sleep mode is recorded in the logs, its completely empty until next boot up. This makes me think that on resume from sleep, macOS isn't seeing the drive anymore (hence can't even write to logs). My assumption here is that the Option ROM is presenting/configuring the card in IDE mode, which is not what macOS is expecting.
This post describes the problem:
and also has a solution: in dsdt, simply write the correct values to 0x40, 0x41, 0x42 (which must be the BAR0 register?) to configure Option ROM to use AHCI mode. But I have no idea what address BAR0 is on the Marvell 88SS9293 - there appears to be no documentation whatsoever on this controller available online!
I managed to dump the ROM using Linux sysfs, but don't have the skills to disassemble/decipher the binary to find the correct addresses. Anyone with such experience able to help?? I've attached the ROM dump and lspci output.
Hi, have an old Asrock X58 Deluxe motherboard with an i7-920 Nehalem CPU (yes old board ) + AMD RX460 . As per the title, i've managed to get Mojave installed and running with Speed Step working too!
Final issue i'm having is with sleep - it sleeps fine and even responds to keyboard/mouse event, but instead of waking up to the desktop it restarts and loads from BIOS boot screen. When finally booted into macos, it restores as if restored from unexpected shutdown (though no error is shown).
I've tried for days to get it working, sometimes depending on clover config changes, I can get it to wake up without reboot, but it just remains at a black screen and is unresponsive.
I have no custom DSDT, i've tried writing one but don't know really know what i'm looking for? Currently relying on clover patches. I've uploaded my original DSDT (dumped from Clover, F4 option) + current config. Anyone have any ideas?
When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
This Machine has a 1300W Power Supply So Sleep is Very Useful.
1) FIX_WAK and FixShutdown as per Clover Wiki.
2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
3) Tried to Run this command: disablehibernate.command.zip
4) Tried darkwake=0 to 10
5) Disabled wake on USB & Wake on LAN (BIOS)
sudo pmset -g
System-wide power settings:
Currently in use:
Sleep On Power Button 1
pmset -g assertions
2019-02-19 18:51:04 +0200
Assertion status system-wide:
Listed by owning process:
pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17"
Timeout will fire in 600 secs Action=TimeoutActionRelease
pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power"
Kernel Assertions: 0x4=USB
id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard
id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse
Idle sleep preventers: IODisplayWrangler
CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
RAM: 128 GB 1333 MHz DDR3 ECC Memory
GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
Chipset: Intel C602
Audio: Realtek ALC3220 (ALC280) High Definition Audio
SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4
Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
Network Controller 2: Intel Ethernet Controller I210
NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
I am a novice in the field of Hackintosh, and this is my first post here.
I have managed to setup and install my hackintosh and it is perfectly working other than this one issue.
I am unable to figure the exact cause of this issue. My Hackintosh is unable to go into sleep mode after the set time. This is what happens (see the attached video file).
You can see that the screen turns off, then I see the power on the graphics card and fans turn off.
Immediately it comes back ON and the screen TURN's ON.
I have followed various threads in several forums trying various options suggested for sleep related issue, but have been un-successful.
If anyone is able to guide me through in resolving this issue, I would appreciate that.
I am unsure what files need to be attached for you people to help me, feel free to ask and I shall upload the necessary files.