Jump to content

6 posts in this topic

Recommended Posts

Hello i start a new post, i have a problem with my USB 3.0 ports, impossible to mount USB 3.0 key/drive on USB 3.0, but USB 2.0 key/drive can mount on 3.0 ports.

 

I try to follow this guide :

http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/

but in 2b. impossible to find XHC1 in my dsdt so impossible to finish the tutorial, but think that only for usb 3.0 INTEL ports.

 

I listen that for some people, genericUSBXHCI.kext work under El Capitan 10.11.3 for repair USB 3.0, for me not.

For my smbios i use iMac 14,2

 

I link my config.plist for Clover, my dsdt, my ioreg and a screen of USB preferences.

 

 

So if someone can help me for fixing that USB 3.0 ports...

 

Thank you.

 

post-1368912-0-40204100-1453741904_thumb.png

post-1368912-0-94503200-1453741904_thumb.png

DSDT.aml.zip

iogen.zip

config.plist.zip

Share this post


Link to post
Share on other sites
Advertisement

And if i follow this guide, there is no sens, if HS = USB 2.0, SSP = USB 3.0, mean that i have 8 usb 2.0 and 2 usb 3.0 ??? my motherboard have 2 usb 2.0, 6 usb 3.0, 2 usb 3.1


ok i go try that dsdt ! thanks.


Ok so i place the dsdt fil into /EFI/CLOVER/ACPI/Patched reboot and nothing :/

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TheAngryYeti
      First, my build:
       
      Asus ROG Strix H370-I mobo
      i5 8400 cpu
      32gb ddr 4 2133
      1tb samsung evo 860 ssd
       
      Ive finally gotten to the point where the installation of HS loads to the language selection screen, but then i lose all usage of every USB port.
       
      Im at a loss of what to do from here.
       
      According to others, i have the proper files in the kexts/other folder as well as the drivers64UEFI folder.
       
      Does anyone have any suggestions as to what i can do? Im getting kinda desperate as ive been at it for a week now and this is as far as ive gotten.
       
      -Sin
       
       
    • By TheAngryYeti
      So I FINALLY got my High Sierra thumb drive to boot and once I got to the language selection screen, I noticed I lost all connectivity to my keyboard and mouse.
       
      i tried plugging in both into all of my USB ports (2.0, 3.0, 3.1) to no avail.
       
      i made sure I had the latest USBInject kext and XHCI-Unsupported kext in the Other folder.
       
      i also noticed whilst troubleshooting, the thumb drive will ONLY boot using Verbose and plugged into one of the 2 3.1 ports.
       
      does anyone have ANY suggestions?? I’ve been struggling for a week now on this!!
       
      thanks in advance
       
      -Sin
       
      Build: Asus ROG Strix H370-I, i5 8400, 32Gb ddr 4 2133, 1Tb Samsung EVO 860 ssd
    • By PixelLover
      I'm in the middle of my first hackintosh (High Sierra) on my ZenBook Pro UX501VW-US71 laptop using the Vanilla Install. I've tried using different config.plst files and I've gotten the furthest with RehabMan's own (linked here). It hangs at error message IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.   Can anyone help me figure out what changes to make to the config.plst file for my specific laptop (which is where I assume the problem lies)   System Specs: Intel Skylake Core i7­-6700HQ 2.6 GHz Quad­core
      Intel® HD Graphics 530 Nvidia GTX 960M 2G 15.6" Touch IPS 4K Ultra­-HD display, 3840 x 2160 resolution   Kexts: AppleALC.kext FakeSMC.kext Lilu.kext USBInjectAll.kext WhateverGreen.kext  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×