Jump to content

164 posts in this topic

Recommended Posts

Greetings !

 

And thanks for your guide and informations.

 

I have a build quite similar, same MoBo, i7-6700K, ASUS Strix GTX980 Ti for graphic card, 2 x 16gb 3000Mhz Corsair Domination RAM, and running 10.11.6

 

I tried to post-install using your files but i'm not sure what i'm doing wrong cos the sound just won't work. Graphic card is detected all good with Alternate Nvidia Drivers, using boot flag set in Clover Configurator and all... Everything seems pretty stable. The USB3 on the back work but the front one on my Corsair 450D case are stuck on USB2, which I can live with. But the sound, the sound...

 

I managed to get the hdmi audio to work, using provided kext found online to fix this, on tonymacx86 site, but I would really like to get the whole on board audio to work properly. 

 

Do I need to edit anything in the clover config.plist file to get the sound to work ? I followed the Toleda guides, I tried injecting audio, used the AppleALC kext, the audio_cloverALC-110_v1.0s10 command, but I dunno what codec to use since we have the CA0132... I use system profile 17.1 , 14.2, the usual 3.1 but yet nothing seems to work, and It's hard to find any guide for this specific configuration. I tried copying your clover folder but i had kernel panic and barred sign instead of apple logo on boot.

 

 
Any help or advice or guidance would be welcome. I don't mind even doing yet another clean install as it goes smooth and fast, so if ever there is a file I messed up or some updates of your files I could use to fit my own build, that would be awesome.

 

Thanks for your time and patience and, hopefully, wisdom and knowledge about this specific motherboard and config.

 

Bless !

PS : This is my 2nd hackintosh build btw, been running an old i7-2600K on a Z97 Mobo for years and still running fine... That new Skylake build is giving me headaches I didn't have since I built the first one haha. ^^

post-1783049-0-55452700-1471061005.png

post-1783049-0-51673900-1471061013_thumb.png

config.plist.zip

audio codec detect v1.6 command results.txt

post-1783049-0-44864400-1471061238_thumb.png

Share this post


Link to post
Share on other sites
Advertisement

Hi,

 

One question, have you update to OS X Sierra? you got sound control on sound?

 

I just looking for a solution to get volumen control on my GB Z170X Gaming 7 but nothing works...!!!

 

 

If you have the solution, I will thanks you sharing it.


 

Share this post


Link to post
Share on other sites

Thanks to Andres ZeroCross!!! Spent a good chunk of a month trying to get creative kext loaded properly. Took a break and started back at the first post and verified everything again with his guide. Works now!!! TIP:Make sure you clear out any other methods that you try and patch a vanilla AppleHDA.kext for good measure.

Share this post


Link to post
Share on other sites

I'm getting no signal on boot with a GTX 960. Tried with a GT 710 just to try and see if it would work and it worked but only at 30hz 4k. Can anyone please drive me in the right direction? I'm using Sierra, SMBIOS 14,2, and AGDP Fix v1.3 applied. Also, using HDMI.

Share this post


Link to post
Share on other sites

After following some links from OP on this thread, I found another thread where Wern is still developing a modded AppleHDA.kexthttp://www.insanelym...ohda/?p=2379348

 

I got rid of all my other audio-related changes, replaced my /System/Library/Extensions/AppleHDA.kext with that, and set audio layout inject to 1 with HDAS to HDEF renaming in clover plist. I've now got audio on most of my headphones and line out ports with volume control! I'm on 10.12.3.

Share this post


Link to post
Share on other sites

The first page has a DL for 10.11 config and DSDT, is there one for 10.12.3? 

I have 10.12.3 working with a GTX 980ti but sleep looses connection with both the internet (network I guess) and USB3.0 devices 

I have never been able to get sound working despite working my way through Wern Apfel thread and trying everything I could. I'm thinking of doing a clean install.

 

Any help would be appreciated. 

Share this post


Link to post
Share on other sites

The first page has a DL for 10.11 config and DSDT, is there one for 10.12.3? 

I have 10.12.3 working with a GTX 980ti but sleep looses connection with both the internet (network I guess) and USB3.0 devices 

I have never been able to get sound working despite working my way through Wern Apfel thread and trying everything I could. I'm thinking of doing a clean install.

 

Any help would be appreciated. 

-Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in ur desktop

Share this post


Link to post
Share on other sites

MaLdOn

I hope I got this right.

https://www.dropbox.com/sh/ncpz1d1h7dddin8/AAClX6clvBYfrRNQ5jdqVvPta?dl=0

 

If there is a better way to share the files on here let me know I couldn't see anything obvious.

 

Thanks for your help, my head is bleeding from banging it against the wall.

This is my second hack and I thought is would be easier.

Share this post


Link to post
Share on other sites

-Check folder for ur next installation, UEFI!

CLOVER.zip

-Install Clover with these options

01.png

-Replace folder

 

Patches

-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-EC
-PNLF
-HDMI NVIDIA / ATI

For Native PM u can use Generate P and C States in config.plist or Pike Script

ssdtPRGen.command.zip

 

If u install Clover with options above, just replace ;)

Share this post


Link to post
Share on other sites

I got my audio running with AppleALC 1.1.1 and Lilu 1.1.0 in clover/kexts/other with Layout id=2 injected. Z170X Gaming 7 rev 1.0 MOBO. Only once did it not work and i hat to shut down, start windows and start Sierra again. But like i said it works 98%. Never happened again. (Its been a few weeks). If layout ID 2 doesnt work, try 0-6.

Let me know if that helps.

 

Did you ever use bluetooth? I am having trouble with Bluetooth and Broadcom Cards. I had the Broadcom BCM943602CS and Broadcom BCM943602CD and both provided wireless lan but no bluetooth connection with my iPhone.

 

Regards,

Hunk

Share this post


Link to post
Share on other sites

Hi, I have this motherboard, along with a 6700k and a 1070 GTX. My Hackintosh is working almost flawlessly, except for sleep/wake. It either just wakes itself up automatically (except the monitor will stay black). When I move the mouse the monitor will come back on. Sometimes it will also just go into a reboot-loop.

 

Am I correct in assuming I need a correct DSDT to fix this problem?

 

Using the DSDT and SSDT from this thread didn't seem to do anything for me.

 

It's all a bit confusing to me, could someone help me with a simple step-by-step guide on how to get a DSDT for my own setup and so I can post it and see if everything's alright?

 

For what it's worth, the terminal says the wake reason is:

 

2017-08-18 23:46:33.880022+0200  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XDCI XHC

Share this post


Link to post
Share on other sites

For what it's worth, the terminal says the wake reason is:

 

2017-08-18 23:46:33.880022+0200  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XDCI XHC

 

That's usually a sign of an attached device waking your machine up. I saw this with a Dell monitor that had a built-in USB hub. The hub was the problem. Disconnecting just the USB let my machine stay asleep. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By Raffay1234
      I'm transitioning from Clover to Opencore. I thought the process will be simpler but it turns out it isn't. I have created a bootable Catalina USB with Opencore but stuck at this error. I have attached my EFI and the verbose output. Anyone please provide some guidance please?
       
      The laptop is HP Pavilion 15 Gaming:
      Intel Core i7-9750H
      16GB RAM
      256GB SSD + 1TB SSD
      PS2 Keyboard + I2C Trackpad
       

      EFI.zip
    • By tonyx86
      **********************************************************************************
      In this thread, I have fully documented the installation of macOS Catalina on my HP EliteDesk 800 G4 Mini. It is a PERFECT HackMini8,1 and is running very well for me without any issues. I hope this documentation helps you to install macOS on your hack. Please leave feedback if you think there is anything I can improve and let me know if you have any questions.
      **********************************************************************************
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       

       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      macOS Installation
      See macOS installation steps here See Known Issues here for additional installation steps that may not yet be included in my attached config files See CLOVER (UEFI) installation later in this first post
      See BIOS configuration in attached BIOS configuration PDF document
      See EFI and /L/E kexts in attached EliteDesk.zip archive See how I developed my installation methodology here See references here See instructions here for installing two M.2 2280 NVMe SSDs and one SATA HD / SSD  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port (I have partially tested the USB 3 functionality of the port and it seems to be working fine with the SSDT-UIAC.aml here) Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions - see here
       
      BIOS Version / Configuration
      Version: 02.11.01 Rev.A See attached BIOS configuration in PDF document "HP EliteDesk 800 G4 Mini BIOS Configuration.pdf" Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching
      See here and here  
      Current Versions
      Catalina 10.15.5.02 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
      ScreenShots
       
       
      HP EliteDesk 800 G4 Mini BIOS Configuration.pdf
      EliteDesk800 G4 Mini - Rev 0.91.zip
    • By MaLd0n
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -Tutorial
      https://tinyurl.com/re2c9sz
       
      -Post Installation
      Paste EFI folder into EFI Partition in your SSD, reboot and extract one full dump with this app and post here!
      https://tinyurl.com/ybwr9kq3
      RunMe.app
      https://tinyurl.com/y9562hz7
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--
       









































       
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community, SchmockLord, daliansky and many, many, many others!
       
      We're all here to have fun and learn from each other!
    • By MaLd0n
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
      https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By ITzTravelInTime
      Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
       
      The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
       
      This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides you simplicity and flexybility, and lets you to avoid most of the tedious steps or problems of other simlar apps.
       
      TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install your bootloader of choiche on the usb (or just leave it as is if you want to use it on a real Mac).
       
      Features:
      - Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
      - It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
      - You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
      - Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
      - 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
      - Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
      - Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
      - No need to use Disk Utility. TINU can format your drive or partition for you.
      - Integrated EFI partition mounter tool.
      - Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
      - Offers advanced features to customize your bootable macOS installer.
       
      Features that are planned for future versions:
      - Support for other languages, at least Italian.
       
       (To sugegst a new feature please contact me on github)
       
      Requirements:
      - A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
      - A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
      - A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
       
      Download:
      https://github.com/ITzTravelInTime/TINU/releases

      Frequently asked questions:
      https://github.com/ITzTravelInTime/TINU/wiki/FAQs
       
      Useful links:
      Thread (english) on insanelymac.com:
      - http://www.insanelymac.com/forum/topic/326959-tinu-the-macos-installer-creator-app-mac-app/
      Thread (italian) on insanelymac.com:
      - https://www.insanelymac.com/forum/topic/333261-tinu-app-per-creare-chiavette-di-installazione-di-macos-thread-in-italiano/
      Thread (english-german) on hackintosh-forum.de:
      - https://www.hackintosh-forum.de/index.php/Thread/33630-TINU/
      Post on Reddit:
      - https://www.reddit.com/r/hackintosh/comments/a1h61d/tinu_vanilla_bootable_macos_installer_creation/
      Facebook hackintosh help and beta testing (Italian only):
      - https://www.facebook.com/groups/Italia.hackintosh/?fref=ts
      Contact me (project creator):
      - Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
      - email: piecaruso97@gmail.com
       
      Note that:
      - This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license.
      - We (the project creator and othe people involved with active developmment) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
      - We do not guarantee support to you, this is only an open source project, not a product released by a company!
      - This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be.
      - This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
       
      Credits:
      - Apple for macos and installer apps and scripts
      - People that helped me a lot:
      Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.   
      - Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
      - Thomas Tempelmann for help with the UI
      - Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
       
      Here are also some screenshots inside this spoiler tab
       
       
       
         
×