So, here's what i think clover do when it patch ati framebuffer, first it read a cached kext, then it search the original hex value of the connector, then it changed the value with the new one. Is it correct? now, here's what i find confusing... let's say that i want to patch AMD7000Controller.kext, in that kext, i want to patch "AJI" framebuffer with a new value, so clover try to find the hex value of "AJI" connector then replace it with the new one, simple right? but when i search the AMD7000Controller binary file for other framebuffer, some of them didn't exist in the binary, for example, i tried to patch "Ramen" framebuffer, from various source, it said that:
Ramen (6) @ 0xeba70
LVDS, HDMI, DP, DP, DP, DP
So i open a hex editor and search for:
but, it turns out that hex editor couldnt find that hex value in AMD7000Controller,
most of the framebuffer exist in the AMD7000Controller, but some doesnt, If this is the case, then, where does clover find the original framebuffer to be patched? am i missing something?
This is how I would create my first hackintosh MacBookPro 13,2 on HP EliteBook 820 G3. I selected this one as an example because it has Ethernet and it. can be made as a perfect MacBookPro 13,2. This procedure will actually work with all Laptops and Desktops too. Watch the videos carefully.
1. Gather all information about the hardware, download solftware, create flash drive installer with Catalina using Clover and OpenCore boot loaders.
2. Understand the files inside boot loader and create the config files for both Clover and OpenCore boot loader.
3. Actual installation and post installation.
Install macOS Catalina to External USB Hard Drive.
Patch DSDT and SSDTs for perfect Sleep/Wake and USB ports power.
Use External USB Wifi
Install DW1820A instead of DW1560 for BT4.0 and Wifi.
Patch AppleALC For Audio Codecs
Lenovo T460 macOS with Clover Guide
Latest Release on GitHub (July 2020)
Updated to Clover r5120
Updated Lilu based kexts - Lilu, ALC, WEG
Various Tweaks over Last months
The main branch in my github repo is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle seems to work on Sierra, HighSierra, Mojave and Catalina. There is an OpenCore branch in the repo as an alternative to Clover. This guide was developed for a Clover implementation. But the thread has evolved to include discussion of both Clover and Opencore for these systems: T460 and T470 family of ThinkPads.
Full Clover file set - config.plist etc.
Includes all custom kexts
Includes custom DSDT/SSDT scripts and patches
The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
Devices and aspects working:
Ethernet - Intel I219LM is enabled via IntelMausiEthernext.kext
WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip
Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed)
PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt
USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work - 3 external USB and internal Camera, BT, etc
Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices.
Note: have not tried to implement the SD card reader - no driver found.
New Installation - Steps and Details
Part 1 - OS Installation
Part 2- Post OS Installation and Setup
Notes on Custom Kexts