Jump to content
johnrey

El Capitan UEFI Clover on Sony Vaio S

151 posts in this topic

Recommended Posts

so... is everything working great right now? :D

 

I will reattempt my installation from scratch soon. It doesn't boot anymore anyway... blackscreen then return to clover or reboot.

 

I hope I'll achieve to disable my discrete card and wake/sleep this time...

 

@midi are you still available to look at my file to disable my discrete card.. There's no option in my bios to disable it (I have the windows 7 model)

Share this post


Link to post
Share on other sites
Advertisement

so... is everything working great right now? :D

 

I will reattempt my installation from scratch soon. It doesn't boot anymore anyway... blackscreen then return to clover or reboot.

 

I hope I'll achieve to disable my discrete card and wake/sleep this time...

 

@midi are you still available to look at my file to disable my discrete card.. There's no option in my bios to disable it (I have the windows 7 model)

Sorry cloud, it's been a while I haven't touched a SSDT :P This quick return to clover is maybe a config.plist file, Clover driver64uefi is missing drivers OR the usb installer/ OS X installation is damaged. Try to check those. Good luck, send me (like upload it here, not PM) your ACPI > origin folder (remove MSDM.aml!!!!!!)

Share this post


Link to post
Share on other sites

thanks for wonderfull guide...i have sony vaio e-series and successfully installed E.C alongside 

 

windows 10 i follow the guide carefully but still can't get to boot menu without usb...

 

pls. kindly help me thanks in advance...

Share this post


Link to post
Share on other sites

i already fix bout directly boot into clover boot menu...

 

i try to get dsdt / ssdt by pressing f4 on clover boot menu but 

 

​i didn't see any dsdt.dsl / ssdt-2 /ssdt-7 on efi/clover/acpi/origin...

 

how do i get those file? :( sorry I'm new on clover

 

KYu2PTJ.png

Share this post


Link to post
Share on other sites

i already fix bout directly boot into clover boot menu...

 

i try to get dsdt / ssdt by pressing f4 on clover boot menu but 

 

​i didn't see any dsdt.dsl / ssdt-2 /ssdt-7 on efi/clover/acpi/origin...

 

how do i get those file? :( sorry I'm new on clover

 

KYu2PTJ.png

it's not DSDT.dsl, it's DSDT.aml. ;)

Share this post


Link to post
Share on other sites

Solucionado Brightness control for Vaio Fit SVF15A1C5E.

 

Volume Mute = Fn+F2

 

Volume up = Fn+F4

Volume Down = Fn+F3

 

Brightness Down = Fn+F5

Brightness Up = Fn+F6

 

GUIDE Linz

 

 

Looking solution for the key, trackpad disabled ( Fn+F1) now works with Fn + PrtSc.

 

IZVq9iw.jpg?1

 

into method label _Q1D replace_content
begin
// Brightness Down\n
Notify(\_SB.PCI0.LPCB.PS2M, 0x0205)\n
Notify(\_SB.PCI0.LPCB.PS2M, 0x0285)\n
end;
into method label _Q1C replace_content
begin
// Brightness Up\n
Notify(\_SB.PCI0.LPCB.PS2M, 0x0206)\n
Notify(\_SB.PCI0.LPCB.PS2M, 0x0286)\n
end;

 

Change the variable _Q1D/_Q1C as per the log. In my Vaio keyboard is _Q8F=Down, _Q8E=Up.

Share this post


Link to post
Share on other sites

Solucionado Brightness control for Vaio Fit SVF15A1C5E.

 

Volume Mute = Fn+F2

 

Volume up = Fn+F4

Volume Down = Fn+F3

 

Brightness Down = Fn+F5

Brightness Up = Fn+F6

 

GUIDE Linz

 

 

Looking solution for the key, trackpad disabled ( Fn+F1) now works with Fn + PrtSc.

 

IZVq9iw.jpg?1

 

into method label _Q1D replace_content

begin

// Brightness Down\n

Notify(\_SB.PCI0.LPCB.PS2M, 0x0205)\n

Notify(\_SB.PCI0.LPCB.PS2M, 0x0285)\n

end;

into method label _Q1C replace_content

begin

// Brightness Up\n

Notify(\_SB.PCI0.LPCB.PS2M, 0x0206)\n

Notify(\_SB.PCI0.LPCB.PS2M, 0x0286)\n

end;

 

Change the variable _Q1D/_Q1C as per the log. In my Vaio keyboard is _Q8F=Down, _Q8E=Up.

Thankies. Ill try that now!

Share this post


Link to post
Share on other sites

Hi, I have no audio input. 

Please, can you guys help me?

 

Thanks a lot

 

Vaio SVE15 - El Capitan 

 

***********************************************************************

 

 AppleHDA , not work on my Vaio SVF.

delete AppleHDA.Kext , and install VoodooHDA 2.8.8  Download

 

VoodooHDAPrefPane.jpg

 

My Vaio with VoodooHDA 2.8.8 it has worked properly. wiki.osx86SonyVaio SVF

Hope this can help you.

 

 

Share this post


Link to post
Share on other sites

Hi, I have no audio input. 

Please, can you guys help me?

 

Thanks a lot

 

Vaio SVE15 - El Capitan 

 

 

 

 

Lemme guess, 10.11.4 update right?

 

http://www.insanelymac.com/forum/files/file/496-applehda-patcher/

 

Use this, open it, Choose your Mobile Codec, hit patch, it will make a folder in your desktop with your codec patches, open it, go to Clover folder there, you'll find a "config.plist" and a "aDummyHDA.kext". Delecte DummyHDA.kext from your system (found in /S/L/E) then install this one, reboot after fixing caches/perms. Audio should be back :) No Voodoo required for this experiment, no need to sacrifice your sound!

Share this post


Link to post
Share on other sites

Does anyone wants to share his dsdt with me,i need one from Vaio SVE and one from vaio SVS,i need it to compare them with my SVE dsdt,as i'm trying to make some universal patches regarding Fan speed showing up,already patched  dsdt's are welcome 

Share this post


Link to post
Share on other sites

Ok guys!

for AppleHDA problem, I updated (later, a lot later) OS X to 10.11.4 and I had this audio problem and use the AppleHDA Patcher app as I told you but for me it didn't work.

For some reason the Platforms.xml.zlib in the generated Dummy doesn't work for us, so what I did is copy it from the original DummyHDA (check #1) then paste it under <aDummy.kext>/Contents/Resources/ and replace the old one. ATM I'm contacting Mirone to check what's the problem and he'll sure try to fix it.

 

@Onestyle 

Does anyone wants to share his dsdt with me,i need one from Vaio SVE and one from vaio SVS,i need it to compare them with my SVE dsdt,as i'm trying to make some universal patches regarding Fan speed showing up,already patched  dsdt's are welcome 

 

here is my SVS (the same as OP's, latest bios) DSDT_midi.zip

What I applied:

[As in #1] + 0x0D USB patch and maybe AR9285 patch.

Share this post


Link to post
Share on other sites

Thanks midi,now I only need one from SVE. I've already seen difference between SVS and mine SVE,fan reading might work after some testing and my research,so midi we will stay in touch over pm.

Share this post


Link to post
Share on other sites

Really? I will try it out. :D

 

EDIT: Updated the guide for Audio fix in 10.11.4 and deprecated DisableTurboBoost.kext. Some minor changes & fixes here and there, too.

Share this post


Link to post
Share on other sites

Thanks @johnrey. Btw, no need for Disableturboboost.kext anymore, the latest clover had an option for that and it's working great for me.

Why don't you use http://www.rugarciap.com/turbo-boost-switcher-for-os-x/ to disable and enable turbo boost when ever you want,that is the only thing I use to enable and disable it.

Share this post


Link to post
Share on other sites

Why don't you use http://www.rugarciap.com/turbo-boost-switcher-for-os-x/ to disable and enable turbo boost when ever you want,that is the only thing I use to enable and disable it.

I've been using it for quite a while but after that i found myself in no need for TB (mostly just watching online videos and doing basic word processing and presentations). My load demanding works is mostly done on windows (thanks to the ssd the switch is waaaay faster now). I am ok with this program, people who care about performance/efficiency on OSX should mostly use this instead of Clover's way!

Share this post


Link to post
Share on other sites

I used the mentioned TurboSwitcher but it's more convenient when it automatically disables TurboBoost. It drains the battery and I don't need it on battery.

Share this post


Link to post
Share on other sites

Guys, I can't get my _QXX Variables for brightness, for some reason. I get nothing in syslog (no ACPIDebug output, and if it is it's just random and wont work). Any help?

Share this post


Link to post
Share on other sites

Guys, I can't get my _QXX Variables for brightness, for some reason. I get nothing in syslog (no ACPIDebug output, and if it is it's just random and wont work). Any help?

 

If you used the dsdt i've sent you,it doesn't have those variables defined (look for them and you'll see they aren't there)

Share this post


Link to post
Share on other sites
Hello, Onestyle

 

this is my DSDT ... if you see some improvement I can do, you tell me ...

a greeting and for anything else, a message

 

I am Spain- translated with google

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/yxsw7d3t
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/yxsw7d3t
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
       
      Use these kexts, enable XHCI port limit patch
       
      USB INTEL SERIE 400.zip
       
      and follow this tutorial for remap USB ports
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By Nomade
      Hello All,
       
      It's been a while that I am trying to update my system to 10.15.16.
      The install seem to start, then at reboot time I only see the Normal boot and the Recovery option from the Clover boot menu.
      None of those 2 allow to complete the update.
       
      Is there any ways to force it to install and/or show the "Update" option on the Clover boot screen?
       
      PS: I'm using Z97-Gaming-3
    • By Damx
      The specs CPU: Intel® Core™ i3 Processor 8130U, 2.20 GHz (Kaby Lake Refresh) Chipset: Intel® 300 Series Graphics: Intel® UHD Graphics 620 Display: 21.5'' 1920x1200 RAM: DDR4 PC2400 4GB SSD1: M.2 PLEXTOR (with original Windows 10) SSD2: SATA SAMSUNG 850 EVO (for macOS) Sound: Realtek ALC269 WiFi / BT: Intel 3168 NGW Realtek Card-reader  
       
      Not working
      WiFi: Intel 3168 NGW Realtek Card-reader  
       
      Pre-Installation
       
      I will not go through the basics since it is explained in details here on this site. Briefly, the process is to:
      Get Clover Get Catalina macOS installer Create USB with 2 MBR partitions (FAT32 for Clover and HFS+J for the installer)  
       
      Required kexts
      AppleALC.kext Lilu.kext RealtekRTL8111.kext VirtualSMC.kext WhateverGreen.kext  
       
      Config.plist
      I used the one provided by RehabMan called config_HD615_620_630_640_650.plist. Download it from GitHub. It has almost everything you will need with only few edits for audio.
      Edits:
      [CPU] Make sure there is lilcpu=9 setting in boot arguments needed for Kaby Lake R CPU to be recognised correctly. [GPU] Make sure there is a patch GFX0 to IGPU under ACPI->DSDT [GPU] Under Devices->Properties->PciRoot(0)/Pci(0x02,0) make sure that the AAPL,ig-platform-id value is 00001B59, and the device-id value is 16590000 [AUDIO] Under Devices->Properties->PciRoot(0)/Pci(0x1f,3) set the layout-id to 40 and the device-id to 70A10000 [SMBIOS] Set Mac model ID is iMac19,2  

       

       
      Notes
      For some reason with latest version of Clover the install partition was not visible. If you run into the same issue you can downgrade Clover to r5103, which worked perfectly. WiFi / BT Intel 3168 NGW needs to be replaced if one needs WiFi. Someone mentioned that to get HDMI work properly you may need to change AAPL,ig-platform-id value to 00001659 for PciRoot(0)/Pci(0x02,0) - not my case but may be considered if you get this issue. Don't forget to generate your serial and other SMBUS values before signing in with iCloud services.  
       
    • By MaLd0n
      A very custom DSDT for best experience under macOS. Removed all unused devices, injected all Apple devices, essentials, cosmetics, real improvements. 
       
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
          -Original DSDT have 167,880 lines and 762kb
       
      DSDT ORIGINAL.aml.zip138.01 kB · 8 downloads
       
      -Patched DSDT have 30,912 lines and 111kb
       
      DSDT PATCHED.aml.zip27.01 kB · 17 downloads
       
      --Hardware--
      Asus ROG RAMPAGE VI EXTREME OMEGA

      Processor  Intel i9-10980XE

      GPU Radeon RX 5700 XT

      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -XSPI -EC -PNLF -ARPT -GFX0 -NVME  
      --Screenshots-



















       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
          -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145 Model with Intel Core i5-1035G1 IceLake / Intel HD Graphics ICL
      -Update bios/uefi to last version 
       
      *For now we have 2 problems. Wake from sleep and some bugs in trackpad*
       
      --Bios/UEFI config--
      Go to Security tab and disable Secure boot
       
      -IceLake Premade installation Folder (easy way installation)
      https://tinyurl.com/y3tl6xlx
       
      --Clover and OpenCore Folders--
      Just paste EFI folder inside EFI partition
      -OpenCore
      https://tinyurl.com/y3c4rjkr
      -Clover
      https://tinyurl.com/y4496nq8
       
      --Enable Trackpad Dragging Option--
      Go to System Preferences/Accessibility/PointerControl/Trackpad Options and "Enable dragging"

      -Bluetooth Broadcom
       
      BrcmBluetoothInjector.zip2.46 MB · 4 downloads
       
      -OcQuirks.efi for Clover (Just replace Drivers folder)
       
      drivers.zip74.57 kB · 4 downloads
       
      --DSDT Patches--

      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 12 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -FULL RENAMED DEVICES   --IGPU Patch-- (All credits to Austere.J) Discussion about that HERE
       
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key>             <dict>                 <key>AAPL,ig-platform-id</key>                 <data>AABSig==</data>                 <key>device-id</key>                 <data>UooAAA==</data>                 <key>framebuffer-fbmem</key>                 <data>AACQAA==</data>                 <key>framebuffer-patch-enable</key>                 <data>AQAAAA==</data>                 <key>framebuffer-stolenmem</key>                 <data>AAAwAQ==</data>                 <key>framebuffer-unifiedmem</key>                 <data>AAAAgA==</data>                 <key>hda-gfx</key>                 <string>onboard-1</string>                 <key>igfxfw</key>                 <data>AgAAAA==</data>             </dict>  
      --USB Fix-- https://tinyurl.com/y4mqfahz
       
      -ScreenShots

       


























      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Acidanthera Team, Olarila Facebook Community, Hackintosh Facebook Community and many others!     We're all here to have fun and learn from each other!
×