Jump to content
Cyberdevs

El Capitan on GA-Z170X-Gaming 5

790 posts in this topic

Recommended Posts

All good just wanted to make sure it wasn't actually used as a boot flag

 

Sent from my SM-G900I using Tapatalk

I wonder what that flag could do  :D

My be triple the amount of vga adapters  :lol:  :lol:  :lol:

Just kidding  :rofl:

Share this post


Link to post
Share on other sites
Advertisement

I wonder what that flag could do :D

My be triple the amount of vga adapters

Just kidding :rofl:

Self destruct hackintosh?

 

Sent from my SM-G900I using Tapatalk

Share this post


Link to post
Share on other sites

You only need to change the entry that matched your smbios. And it's not nada_drv=1 it's nvda_drv=1.

 

Sent from my SM-G900I using Tapatalk

 

OK - this has helped, I had to figure out what my smbios string was, the EFI archive I used has the model set to iMac - does that matter?  Would a Mac Pro be better?

 

Anyhow - I was able to find the correct entry, changed the 'Config2' to none - re-installed the kext, set the proper boot flags - and now things are looking much better.

When I log in now, I don't get an interlaced screen wipe to the desktop background like I was getting before - now the graphics are instantaneous.

 

One question though - no matter what I set it to - the NVidia driver app always shows 'OS X Default Graphics Driver' after rebooting.

I select the Webdriver option - reboot - and it gets deselected...

 

I even tried re-installed the web driver - and that made no difference.

 

I'd like to get the best graphic performance possible - so I assume that means using the web driver.

Share this post


Link to post
Share on other sites

Mine would also revert back to the OSX Default but I don't think it really did or else it wouldn't be working right?

 

Sent from my SM-G900I using Tapatalk

Share this post


Link to post
Share on other sites

Mine would also revert back to the OSX Default but I don't think it really did or else it wouldn't be working right?

 

Sent from my SM-G900I using Tapatalk

 

Yeah, after I posted - I went and downloaded the Heaven benchmark and tried running it.

I figured that would prove once and for all if it was using the webdrivers or not.

 

It ran PERFECTLY and blew the doors off my 2012 27" iMac.  I'm a believer!

 

Now - to connect some speakers and see if sound works or not...

Share this post


Link to post
Share on other sites

Yeah, after I posted - I went and downloaded the Heaven benchmark and tried running it.

I figured that would prove once and for all if it was using the webdrivers or not.

 

It ran PERFECTLY and blew the doors off my 2012 27" iMac. I'm a believer!

 

Now - to connect some speakers and see if sound works or not...

My sound has always been flaky both with Toleda script and voodoohda. It would just stop working and take a few reboots to get it back.

 

Sent from my SM-G900I using Tapatalk

Share this post


Link to post
Share on other sites

My sound has always been flaky both with Toleda script and voodoohda. It would just stop working and take a few reboots to get it back.

 

Sent from my SM-G900I using Tapatalk

 

Not sure what Toleda script you are referring to.  This one?  https://github.com/toleda/audio_ALCInjection/blob/master/audio_codecdetect.command.zip

I ran it and it said no codec was detected - check BIOS etc.

 

I checked the BIOS and yes, it is enabled.

 

I am attempting to muddle my way through this guide:

 

http://www.tonymacx86.com/threads/audio-realtek-alc-applehda-guide.143757/#post886744

 

But I'm currently stuck at "Audio codec/ALC Injection? audio_codecdetect.command.zip (Select View Raw, double click)"

 

Note - I have NOT used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] since installing OS X - I thought that was optional if you are using Clover configurator like I have been.

If not - I can give that a try.

 

I did install the VoodooHDA drivers already - not sure if that caused the problem I'm having.

Share this post


Link to post
Share on other sites

Not sure what Toleda script you are referring to.  This one?  https://github.com/toleda/audio_ALCInjection/blob/master/audio_codecdetect.command.zip

I ran it and it said no codec was detected - check BIOS etc.

 

I checked the BIOS and yes, it is enabled.

 

I am attempting to muddle my way through this guide:

 

http://www.tonymacx86.com/threads/audio-realtek-alc-applehda-guide.143757/#post886744

 

But I'm currently stuck at "Audio codec/ALC Injection? audio_codecdetect.command.zip (Select View Raw, double click)"

 

Note - I have NOT used ##### since installing OS X - I thought that was optional if you are using Clover configurator like I have been.

If not - I can give that a try.

 

I did install the VoodooHDA drivers already - not sure if that caused the problem I'm having.

 

I suggest removing all the toledo's added entries in your config.plist and just use voodooHDA. You can find those entries under Kernel and Kext Patches and they have ALC in their comments.

you need to check the following entries in your config.plist as well to make sure everything is set for proper functionality of your audio device. 

 

Under ACPI make sure u have the following DSDT patch present:

Comment: Rename HDAS to HDEF          Find*[Hex]:48444153            Replace [HEX]:48444546

and

Under Devices make sure Audio is set to 1 and ResetHDA is checked.

Share this post


Link to post
Share on other sites

I suggest removing all the toledo's added entries in your config.plist and just use voodooHDA. You can find those entries under Kernel and Kext Patches and they have ALC in their comments.

you need to check the following entries in your config.plist as well to make sure everything is set for proper functionality of your audio device. 

 

Under ACPI make sure u have the following DSDT patch present:

Comment: Rename HDAS to HDEF          Find*[Hex]:48444153            Replace [HEX]:48444546

and

Under Devices make sure Audio is set to 1 and ResetHDA is checked.

I have already removed toledo's entries, my config.plist matches your except nvidia and ram stuff but i still can not maintain sound on every boot. I have tried voodoohda 2.8.8, voodoohda 2.8.8 v3 and voodoohda 2.8.9

 

Edit

Just rebooted and i got no sound through speakers but if i change output to HDMI i get sound through my monitor. Not really ideal for music etc... 

Share this post


Link to post
Share on other sites

I have already removed toledo's entries, my config.plist matches your except nvidia and ram stuff but i still can not maintain sound on every boot. I have tried voodoohda 2.8.8, voodoohda 2.8.8 v3 and voodoohda 2.8.9

 

Edit

Just rebooted and i got no sound through speakers but if i change output to HDMI i get sound through my monitor. Not really ideal for music etc... 

That's wired try using this version of voodooHDA which already works just fine on my rig. I made some modifications to it's volume to get rid of hissing sound.

 

You got to place it under EFI\Clover\kexts\10.11

VoodooHDA.kext.zip

Share this post


Link to post
Share on other sites

That's wired try using this version of voodooHDA which already works just fine on my rig. I made some modifications to it's volume to get rid of hissing sound.

 

You got to place it under EFI\Clover\kexts\10.11

Are using a ssdt for audio? dsdt? This audio issue is driving me mad.

Share this post


Link to post
Share on other sites

Ok,

I have audio working now - and the next hurdle is getting my external USB3 drives to be recognized, so I can transfer files from my iMac.

This LOOKS like what I need to follow:  http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/

 

However, I can't figure out what editor/viewer is being used.

 

To get my nvidia graphics working, I manually made some minor tweaks to a .plist file with a text editor, but I'd like to follow along this guide using the proper tools.

Unfortunately, this guide assumes you already know what the tool(s) referenced are...

Share this post


Link to post
Share on other sites

Ok,

I have audio working now - and the next hurdle is getting my external USB3 drives to be recognized, so I can transfer files from my iMac.

This LOOKS like what I need to follow:  http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/

 

However, I can't figure out what editor/viewer is being used.

 

To get my nvidia graphics working, I manually made some minor tweaks to a .plist file with a text editor, but I'd like to follow along this guide using the proper tools.

Unfortunately, this guide assumes you already know what the tool(s) referenced are...

Extract the contents of the zip file and place them under EFI\EFI\Clover\kexts\10.11

 

and make sure you have all the entries under ACPI DST Patches and add AppleUSBXHCIPCI under kernel and kext patches to raise the port  limit.

Archive.zip

post-1011040-0-96394500-1472728968_thumb.png

post-1011040-0-64664700-1472729005_thumb.png

Share this post


Link to post
Share on other sites

OK,

I copied over the kexts from Archive.zip - and rebooted and clover offered up my USB drive as a boot choice now.

I loaded my clover config.plist and verified that my settings are now identical to both of your screen shots EXCEPT: I have 'Patch APIC' checked.

 

Unfortunately, while Clover can see my USB drive, once I boot up - OS X can not see it...

Share this post


Link to post
Share on other sites

OK,

I copied over the kexts from Archive.zip - and rebooted and clover offered up my USB drive as a boot choice now.

I loaded my clover config.plist and verified that my settings are now identical to both of your screen shots EXCEPT: I have 'Patch APIC' checked.

 

Unfortunately, while Clover can see my USB drive, once I boot up - OS X can not see it...

Compare your settings with this screenshot and make sure you have all the USB values checked like this.

post-1011040-0-19869100-1472811919_thumb.png

Share this post


Link to post
Share on other sites

*Sigh*

 

Turns out - the drive was plugged into a USB3 hub.  I plugged the drive directly into the box, and all was well.

All 'was' well - since then I decided to apply the latest upgrade to El Cap - which required updated nvidia drivers (luckily - they were available)

and now I'm re-fixing my blank screen on boot up.

 

Luckily, Apple doesn't issue patches too frequently.

 

I assume my AppleGraphicsControl.kext got overwritten by either the OS X patch or the nvidia web driver upgrade, luckily, the changes were simple last time.

Share this post


Link to post
Share on other sites

*Sigh*

 

Turns out - the drive was plugged into a USB3 hub. I plugged the drive directly into the box, and all was well.

All 'was' well - since then I decided to apply the latest upgrade to El Cap - which required updated nvidia drivers (luckily - they were available)

and now I'm re-fixing my blank screen on boot up.

 

Luckily, Apple doesn't issue patches too frequently.

 

I assume my AppleGraphicsControl.kext got overwritten by either the OS X patch or the nvidia web driver upgrade, luckily, the changes were simple last time.

I don't believe your modified kext got over written but in fact the build number of os x changed and therefore the nvidia web drivers were not compatible.

 

Sent from my SM-G900I using Tapatalk

Share this post


Link to post
Share on other sites

That's great John_s, unfortunately I have graphics issues with sierra, old black screen case which I couldn't get it to work so I'm waiting for the final release of sierra to see if it's any different from the first public beta.

Share this post


Link to post
Share on other sites

Anyone tested macOS Sierra on their Hackintosh here? Any issues? 

I tested macOS Sierra on two computers one of them has an ATI Radeon 5770 and a Core i3 processor which is my older rig and everything went smoothly but on my newer rig I have black screen issue with my AMD 7790 Radeon display adapter and I didn't put enough effort to solve the problem, but if you are asking if is it supported on skylake processors and your hardware I will say it will, but as I recall you used AMD graphics which might be a bit challenging.

But you won't know for sure unless you try it.

 

I'm waiting for macOS Sierra's final version to test and see if it works for me or not.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.3 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5098): Click here -> ASUS-Z170_catalina.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By Andres ZeroCross
      First i will give you information about my specification
       
      Processor : Intel Core i7 6700
      Motherboard : Gigabyte GA-Z170-HD3
      RAM : Team DDR4 8GB (2X4GB) 2133Mhz - up to 3000Mhz at XMP Profile
      Graphics Card : Palit Jetstream GTX960 4GB DDR5
      SSD and HDD : Fujitsu F200 for System + 500GB Seagate connect with add on PCI-e to Sata 3 Asmedia ASM1062 Chipset
      Other harddrive : 1 Natno SSD, 2x 2TB Seagate, 2x 500GB Seagate connect with internal SATA Controller Interface
      Wifi Card : TP-Link TL-WDN4800
      Monitor : 2x Asus VN248H (HDMI and Display Port with Converter)
      I need 2 new hardware to support this
      a. PCIe to Sata with 2 Ports Sata (because i use 2 important storage)
      b. PCI to USB 2.0 with NEC Chipset (i Plug USB Keyboard, Mouse and USB Installer here)
       
      My steps :
      1. Make USB installer El Capitan 10.11 Public Release with CreateinstallMedia method
      2. Install Clover Rev 3280 into it
      3. Basic configuration for BIOS (Disable serial port at IO section in bios, Boot with UEFI Mode,  Primary Graphics set to PCI-E, Sata Controller = AHCI, CSM Support = Disable, OS Mode = Windows 8/10 WHQL)
      4. My Masic Configuration for Config.plist (open with Clover Configurator Version 4.24)
          ACPI = tick FixHpet, AddDTGP, FixHDA, New Way, Delete Unused, AddHDMI, Drop OEM_DSM of HDA and SATA.
          Bootflag = nv_disable=1 -v dart=0
          Devices = USB Inject, Add Clock ID, Fix OwnerShip, Audio Layout = 2, Reset HDA
          Graphics = There is no change here
          Kernel and Kext Patches = FakeCPUIID 0x00306F2 and tick KernelHasswellE (Please anybody,, i dont want use this. Latest El Capitan 10.11.1 Beta is supported native to this processor right. Help me with kernel so i don't need to use fakeCpuIID again) I I use Clover R3292 and i don't need to use FakeCPUID again,, just tick Kernel Haswell-E and it will boot. So you need to use Clover R3292 and later
          Rt Variables = BooterConfig 0x28 and CsrActiveConfig 0x067
          SMBios = First i use SMBios MacPro 6.1 but later i just need to use iMac17,1 because My System build is identical with iMac17,1 hardware (SkyLake System)
          System Parameters = Inject Kexts Detect and Tick Inject System ID
      5. Boot from Your USB Installer and do everything like normal until you get into desktop
      6. Install Kext Utility,  
      7. Copy "AppleGraphicsControl.kext" from "System/Library/Extensions" to Desktop and then edit info.plist at "AppleGraphicsControl.kext/Contents/Plugins/AppleGraphicsDevicePolicy.kext/Contents/info.plist" and look at OKitPersonalities->AppleGraphicsDevicePolicy->ConfigMap and change "Mac-F60DEB81FF30ACF6 - Config1" to "Mac-F60DEB81FF30ACF6 - None". Reinstall this kext with Kext Utility.
       
      Note : the reason you need to "Config1" of "Mac-F60DEB81FF30ACF6" because it's BOARD-ID for MacPro6,1. so if you use SMBios of iMac17,1 then Check your Board-Id (you can use Clover Configurator and open your config.plist and see your Board-id at SMBios Section) and change "Config2/Config1" to "none". Now i use "Mac-DB15BD556843C820" as my Board-ID because i use iMac17,1 SMBios  so i need to change ConfigMap that related to it 
       
      8. Install Nvidia Web Driver version 346.03.02f02, and restart.
      9. Change bootflag "nv_disable=1" to "nvda_drv=1"
      10. After you get into desktop, get Latest Beta Build 10.11.1 Seed. You need to change seed catalog update first (google it).
      11. Do update to 10.11.1 Build 15B38b and restart
      12. Boot again with bootflag "nv_disable=1", and copy "NVDAStartupWeb.kext" from "System/Library/Extensions" to desktop. And open info.plist at "NVDAStartupWeb.kext/Contents/Info.plist". Look at "IOKitPersonalities->NVDAStartup" and change "NVDARequiredOS - 15A284" to "NVDARequiredOS - 15B". Save,, and reinstall this kext with Kext Utility
      13. IMPORTANT, if you use SMBIOS MacPro 6.1 or iMac 15.1 and some type (I forgot) then do "7Th Step" above again.
      14. Restart and reuse "nvda_drv=1"
      15. Now you have El Capitan 10.11.1 at your SKYLAKE Computer
       
      Problem
      1. Internal Sata is still not function, it show "Intel 10 Series Chipset" but "unknown" for Harddrive Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      2. USB 3.0 is not function too, but it shot at USB System Report Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      3. When you open Browser Applications, Movies or Something like that then it will freeze for 10 seconds. I check console and i found "NVDA(Graphics): Channel exception! Exception type = 0x8 DMA Engine Error (FIFO Error 8)" Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      4. Address of Sound HDEF is different with my DSDT. Normally it should be "0x001B0000" but at my board's DSDT is "0x001F0003". So ScriptCommand of Toleda for ALC is not work anymore, we need to change that script command from HDEF-B to HDEF-F (just look at the script)
      5. We need to change Device HDAS to HDEF at address "0x00fF0003", but something weird after 5times my system freeze and i look at Audio System Report it suddenly show all of AUDIO Interface , before not. Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      6. I look at my Graphics/Displays Sytem report and at PCIe Lane Width, it show "x4" or "x8". Damn,, it should be "x16". It will random change after freeze from "x4" or "x8" My bad, i just need to plug out and plug in again. Just assembly case
       
       
       
      Maybe Rehabman, Slice and Pike R. Alpha want to help me
       
      Well,,
      i attach my file (Darwin Dumper File) <<<<< Before Patched, and
      i attach my DSDT + SSDT + Config.plist <<<<< After Patched and working well
       
       
       
      Before Patch
       
      Before Mod Bios / Patch 1
       
       
       
      Before Mod Bios / Patch 2
       
       
      Before Mod Bios / Patch 3

       
      Before Mod Bios / Patch 4
       
      =================================================================================================
      AFTER PATCH
       
      After Mod Bios / Patch 1
       
       
       
      After Mod Bios / Patch 2
       
       
       
       
      After Mod Bios / Patch 3
       
       
       
      After Mod Bios / Patch 4
       
       
      After Mod Bios / Patch 5
       
       
      After Mod Bios / Patch 6
       
       
      After Mod Bios / Patch 7
       
       
       
×