Jump to content
duduclx

[GUIDE] Dell Latitude E6410 Nvidia El Capitan Clover [ENG]

217 posts in this topic

Recommended Posts

Hi,

Here a guide to install Yosemite or El Capitan on the Dell Latitude E6410.

specs:

- core I7 M640 2.8Ghz

- Intel GMA (integrated GPU)

- intel 5 series

- network intel 82577LM

- nvidia GT218M (nvs 3100M) Tesla

- wifi AR928x (not original wifi card)

- SD card ricoh

- IEEE ricoh

- audio nvidia

- audio IDT 92HD81B1C

 

Dell_Latitude_E6_55140aee69200.jpg

not working:

- wifi/BT (need card replacement)

- dock station DP port

- Intel GMA HD

- sleep/wake

 

working:

- audio and hdmi audio

- built-in multi screen (vga and dp)

- powermanagement

- brightness (with FN keys only)

- display port

- optical drive / ssd drive

- usb

- wired network

- trackpad (two fingers)

- battery statut

- firewire

 

unknow:

- dock station vga port

 

Still have to do:

- nothing

 

1/ CREATE USB INSTALLER

 

 

1.a/ mac osx installer

 

Must have mac os x yosemite installer from apple store in the Applications folder

Format your usb key with hfs+ journalised format and guid partition

Name it YOSEMITE for yosemite command line

Name it ELCAPITAN for El Capitan command line

Open terminal and enter

sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/YOSEMITE --applicationpath /Applications/Install\ OS\ X\ Yosemite.app
If you have El Capitan:

sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/ELCAPITAN --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction

 

 

2/ INSTALL CLOVER

 

 

Download and install the last clover version:

bootloader

- install Boot0af in MBR

- cloverEFI

- cloverEFI 64-Bits SATA

- Drivers64UEFI

- EmuvariableUefi-64

- OsxAptioFix2Drv-64

 

RC scripts on target volume

 

 

 

3/ CLOVER CONFIG FILE

 

 

ACPI

Fixes:

Old Way:

- FixHPET

- FixShutdown

- FixIPIC

New Way

- FIX_RTC

- FIX_ADP1

Drop OEM_DSM:

DSDT name: DSDT.aml

Drop Tables:

- SSDT TableId Cpu0ist

- SSDT TableId CpuPm

- DMAR

SSDT:

- Drop OEM

- Generate PStates

- Generate CStates

 

BOOT:

- gux_defer_usb2

- nvda_drv=1

- kext-dev-mode=1

- rootless=0

- dart=0

Default Boot Volume: LastBootedVolume

Legacy: LegacyBiosDefault

XMPDetection: No

Timeout: 3

 

DEVICES:

Usb:

- inject

- add ClockID

- FixOwnership

UseIntelHDMI

 

GUI:

Mouse:

- Double Click: 500

- Speed: 8

- Enabled

Scan:

Custom

- Entries

- Tool

- Legacy

 

Language (choose)

Screen Resolution: 1440x900

Theme (choose) YosemiteLogin

 

GRAPHICS:

Inject Nvidia

 

Kernel and Kext Patches:

- Apple RTC

- Asus AICPUPM

Add kext patches

Name: AppleHDA

Find [HEX]: 8419D411

Replace [HEX]: 00000000

Comment: AppleHDA IDT #1

 

Name: AppleHDA

Find [HEX]: 8B19D411

Replace [HEX]: D5761D11

Comment: AppleHDA IDT #2

 

Name: AppleHDA

Find [HEX]: 8319D41

Replace [HEX]: 00000000

Comment: AppleHDA IDT #3

 

Rt Variables:

BooterConfig: 0x28

CsrActiveConfig: 0x67

 

SMBIOS:

click Magic Wand, and choose :

MacBookPro6,2 (have nvidia gpu)

or

MacBookPro8,2 (have similar cpu)

 

System Parameters:

Inject Kexts: Detect

- Inject System ID

 

 

 

Copy fakeSMC.kext in:

- /EFI/CLOVER/Kexts/Others

- /EFI/CLOVER/Kexts/10.10

- /EFI/CLOVER/Kexts/10.11

 

4/ POST INSTALLATION:

 

 

I’ve install it in /Library/Extensions and fixes permissions,

but you can install it in /System/Library/Extensions with your kext installer:

- ACPIBacklight.kext

- ACPIBatteryManager.kext

- IntelE1000e.kext

- VoodooPS2Controller.kext

- VoodooSDHC.kext

- aDummyHDA.kext

We don't need to inject vendor and device ID in VoodooSDHC.kext's Info.plist

This is already done, but here how to do:

open VoodooSDHC.kext/Contents/info.plist

edit with your value:

<key>IONameMatch</key>
       <array>
               <string>pciVVVV,DDDD</string>
       </array>
save and install.

 

Must be root:wheel, open Terminal and enter:

cd /Library/Extensions
ls -la
if not, enter:

chmod -R 755 <kext name>
sudo chown -R root:wheel <kext name>
in System/Library/Extensions:

- fakeSMC.kext

 

 

 

5/ DSDT PATCHES:

 

 

Copy Patchmatic and Iasl in the folder /usr/bin

Open terminal and enter:

mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract
iasl -da -dl *.aml
close the terminal.

Open MaciASL

go in preferences and add source: http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master

  • [igpu] brightness fix
  • [syn] Fix _PLD Buffer/Package Error
  • [syn] Fix *pnp/pnp lower case Error
  • [sys] Fix Mutex with non-zero SyncLevel
  • [sys] HPET Fix
  • [sys] IRQ Fix
  • [sys] RTC Fix
  • [sys] SMBUS Fix
In the text field, paste directly:

 

## use rehabman laptop patch first:
## [igpu] Brightness fix
## [syn] Fix _PLD Buffer/Package Error
## [syn] Fix *pnp/pnp lower case Error
## [sys] Fix Mutex with non-zero SyncLevel
## [sys] HPET Fix
## [sys] IRQ Fix
## [sys] RTC Fix
## [sys] SMBUS Fix

## avoid warnings patch (duduclx)
## Unknown reserved name (_WED)
into method label _WED set_label begin WED end;
## Unknown reserved name (_WDG)
into_all all code_regex _WDG replaceall_matched begin WDG end;
## Not All control path return a value (_SRS)
into method label _SRS parent_label LPTE code_regex Store\s+\(0x00,\s+CRAA\) replaceall_matched
begin
    Store (0x00, CRAA)\n
    return (Zero)
end;            

#Prepare to Sleep
into method label _PTS code_regex ([\s\S]*) replace_matched
begin
        If (LEqual (Arg0, 0x05))\n
        {\n
            Store (Zero, SLPE)\n
            Sleep (0x10)\n
        }\n
        Else\n
        {\n
            APTS (Arg0)\n
            EV5 (Arg0, Zero)\n
        }\n
end;

## BATTERY

# remove BAT1, to use only BAT0 for battery management
into method label _STA parent_label BAT1 replace_content begin Return (Zero) end;

## USB EHC1 El Capitan
# El capitan do not use EHCI but use EHC1 and EHC2
# renaming EHCI to EHC1
into device label EHCI set_label begin EHC1 end;

## _T_x rename
into_all all code_regex _T_0 replaceall_matched begin T_0 end;
into_all all code_regex _T_1 replaceall_matched begin T_1 end;
into_all all code_regex _T_2 replaceall_matched begin T_2 end;
into_all all code_regex _T_3 replaceall_matched begin T_3 end;
into_all all code_regex _T_4 replaceall_matched begin T_4 end;
into_all all code_regex _T_5 replaceall_matched begin T_5 end;
into_all all code_regex _T_6 replaceall_matched begin T_6 end;

## DTGP
into method label DTGP remove_entry;
into definitionblock code_regex . insert
begin
Method (DTGP, 5, NotSerialized)\n
{\n
    If (LEqual (Arg0, Buffer (0x10)\n
            {\n
                /* 0000 */    0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, \n
                /* 0008 */    0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B\n
            }))\n
    {\n
        If (LEqual (Arg1, One))\n
        {\n
            If (LEqual (Arg2, Zero))\n
            {\n
                Store (Buffer (One)\n
                    {\n
                        0x03\n
                    }, Arg4)\n
                Return (One)\n
            }\n
            If (LEqual (Arg2, One))\n
            {\n
                Return (One)\n
            }\n
        }\n
    }\n
    Store (Buffer (One)\n
        {\n
            0x00\n
        }, Arg4)\n
    Return (Zero)\n
}\n
    OperationRegion (PMRS, SystemIO, 0x0430, One)\n
    Field (PMRS, ByteAcc, NoLock, Preserve)\n
    {\n
            ,   4, \n
        SLPE,   1 \n
    }\n
end;

## FN KEYS
into device name_hid PNP0303 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    Store (Package (0x02)\n
        {\n
            "AAPL,has-embedded-fn-keys", \n
            Buffer (0x04)\n
            {\n
                0x01, 0x00, 0x00, 0x00\n
            }\n
        }, Local0)\n
    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
    Return (Local0)\n
}\n
end;

## LPC
into method label _DSM parent_adr 0x001F0000 remove_entry;
into device name_adr 0x001F0000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    Store (Package (0x02)\n
        {\n
            "device-id", \n
            Buffer (0x04)\n
            {\n
                0x49, 0x1C, 0x00, 0x00\n
            }\n
        }, Local0)\n
    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
    Return (Local0)\n
}
end;

## Hdef Audio
into method label _DSM parent_label HDEF remove_entry;
into device label HDEF insert
begin
Method (_DSM, 4, Serialized)\n
                {\n
                    If (LEqual (Arg2, Zero))\n
                    {\n
                        Return (Buffer (One)\n
                        {
                            0x03\n
                        })\n
                    }\n

                    Return (Package (0x04)\n
                    {\n
                        "layout-id", \n
                        Buffer (0x04)\n
                        {\n
                            0x03, 0x00, 0x00, 0x00\n
                        }, \n

                        "PinConfigurations", \n
                        Buffer (Zero) {}\n
                    })\n
                }\n
end;

## Intel GMA ready

into device name_adr 0x00020000 insert
begin
             Method (_DSM, 4, NotSerialized)\n
            {\n
                Store (Package (0x06)\n
                {\n
                    "AAPL,os-info", \n
                    Buffer (0x14)\n
                    {\n
                        0x30, 0x49, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, \n
                        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \n
                        0x00, 0x00, 0x00, 0x00\n
                    }, \n
                    "model",\n
                    Buffer (0x12)\n
                    {\n
                        "Intel HD GMA"\n
                    },\n
                    "VRAM,totalsize", \n
                    Buffer (0x04)\n
                    {\n
                        0x00, 0x00, 0x00, 0x12\n
                    },\n
                }, Local0)\n
                DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
                Return (Local0)\n
            }\n
end;
Then Close.

go to File / save as

name it dsdt-patched and save it as Disassembled ASL file

save it again but with ACPI Machine Language Binary format.

 

paste dsd-patchedt.aml in:

EFI/Clover/ACPI/patched

and rename it dsdt.aml

 

 

 

6/ SSDT PATCHES:

 

 

The cpu is 1st generation of intel's processor aka Arrandale.

 

There is no ssdt needed to have a working cpu power management.

It is managed by AppleIntelCPUPowerManagement.

 

 

 

7/ OTHERS

 

 

to hide useless Efi firmware update, open terminal and enter:

sudo softwareupdate --ignore MacBookProEFIUpdate2.7
Enable Trim for SSD:

sudo trimforce enable
You can use the HWmonitor.app provided by rehabman to see fhz, temp, others.

download the fakesmc package.

unzip it, and copy the HWMonitor.app in your Applications folder.

 

 

 

 

8/ PACK FILES:

 

 

here packages with clover, dsdt dump, kexts ...

please, change SMBIOS in the clover config.plist (serial number) to have working imessage/facetime.

 

dell E6410 package

 

 

 

9/ About Intel GMA

 

 

It is possible to disable nvidia graphic cards, and then save power and battery life.

But Dell have EDP, so, it's still possible to have working intel gma only with external screen.

internal screen will not works !!

 

You can find a how to here:

http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

and

http://www.insanelymac.com/forum/files/file/101-intel-hd-graphics-patcher/

 

 

 

Cheers

Share this post


Link to post
Share on other sites
Advertisement

post updated:

- working list

- usb installer creation

- dsdt patch

- ssdt

- hide efi update

- pack files

 

need to fix battery statut and shutdown.

if you may help, then share !

 

cheers

Share this post


Link to post
Share on other sites

updated:

 

i removed New Way and FixRegions in clover.

-> Battery Status Now Working

 

added specs

 

added this in clover to prevent BootO error

- install Boot0af in MBR

Share this post


Link to post
Share on other sites

Hi Duduclx; I have followed everything for my E6410, but after configuring the clover file and putting the config.plist in efi/clover, I get stuck with the following screen shots; the second screen shot shows the circle sign with mutulated text...

 

What do you recommend me to do ? Will try to give the config.plist file as well here.

 

Thanks for baring with me  B)

 

Bart


I cannot upload the content of my usb stick because in compressed form it is 20 MB which is too big :(

post-1584845-0-12216700-1449874942_thumb.jpg

post-1584845-0-76487800-1449874948_thumb.jpg

config.plist.zip

Share this post


Link to post
Share on other sites

changed boot option (maybe needed for the installer, but useless for the installed hackintosh)

changed smbios (for better support, cpu and power management)

changed a few acpi patch.

 

let's try it !

config_duduclx.plist.zip

Share this post


Link to post
Share on other sites

Hey dudu,

 

I just wanted to see if you had any thoughts on proper settings for my E6410 that is currently running Mavericks (trying to install El Capitan). I've never used Clover before (currently have Mavericks installed using Chameleon) so the settings throw me off a bit.

 

Currently, when I try your first Clover configuration I end up with a strange ACPI error that halts the install process and it halts.

 

When I try the configuration file you attached last, the "config_duduclx.plist.zip" file, it makes it past that point, but the installation just stops on a black screen with the circle/line icon in the middle (like bartrap's second screen shot, but without any text - just the black screen and struck out circle).

 

With the second config it does show the "loading" bar however before the cross-out circle...

 

Any ideas on what I could try differently with this configuration? Sorry, I'm not quite sure of my Ethernet, SD Card Reader, or Audio type:

 

My System:

 

Dell E6410

BIOS Version: A14

Processor: Intel Core i5 E6410 2.39 Ghz

Network (Ethernet): *Unknown

Network (WLAN): Dell (Broadcom) DW1510 (BCM94322HM) Wireless Half Card

Graphics: Nvidia NVS 3100M (512MB)/1280x800 @ 60Hz

Memory: 8GB 1333 MHz DDR3

Storage: 240GB Crucial SSD/Intel 5 Series Chipset/AHCI Version 1.30 Supported

SD Card Reader: *Unknown

Audio: *Unknown

CD/DVD: TSSTcorp DVD +/-RW TS-U633J

 

Thank you very much!

Share this post


Link to post
Share on other sites

to bartrap and draynoe:

try remove dsdt and ssdt from /efi/clover/acpi/patched

 

we have not exactly the same model, so bad dsdt/ssdt may crash your system.

(that's why i do from scrath guide, and normaly refuse to share package files)

 

i don't really know your processor model (i5 E6410 is not a intel reference).

you may not have a sandy processor, i have to know.

 

after have installed mac, please, share me your dsdt/ssdt dump for allow me to patch it correctly.

(you may have the same as E6420 who have working shutdown)

 

i was running mavericks with chameleon before upgrade to clover and el capitan.

all my computers are running with clover boot loader.

 

you can see all my current hackintosh build on geekbench:

browser.primatelabs.com/user/60920

 

About my build, i still have this issue:

- shutdown, motherboard still powered (working with a E6420 original dsdt)

- hdmi audio, not working (patch is normally easy)

- dock station, display port not working (tell me if you have one)

- have to try to remove nvidia and use integrated graphics (may have less video memory, but better support)

 

all the rest is working (sleep, ethernet, bluetooth, sd card reader, keyboard light, brightness, acpi button as volume, build-in display port)

 

i have bios revision A11, generally, bios revision don't change how hackintosh works.

 

cheers

Share this post


Link to post
Share on other sites

Hey dudu, (Bart - see below too...)

 

Thanks for the response!

 

I'm continuing to mess with boot settings etc. I'll let you know what I find - if anything.

 

As for my CPU information - here is a bit more extended information:

 

Dell E6410

BIOS Version: A14

 

CPU Information:

 

Brand String: Intel® Core i5

CPU Type: M520  @ 2.40GHz

Vendor/Family/ExtFamily:  0x756e6547/0x6/0x0

Model/ExtModel/Stepping:  0x25/0x2/0x2

MaxCoef/CurrCoef:         0x0/0x12

MaxDiv/CurrDiv:           0x0/0x0

TSCFreq:                  2393MHz

FSBFreq:                  132MHz

CPUFreq:                  2393MHz

NoCores/NoThreads:        2/4

Features:                 0x000002ff

 

Network (Ethernet): *Unknown

Network (WLAN): Dell (Broadcom) DW1510 (BCM94322HM) Wireless Half Card

Graphics: Nvidia NVS 3100M (512MB)/1280x800 @ 60Hz

Memory: 8GB 1333 MHz DDR3

Storage: 240GB Crucial SSD/Intel 5 Series Chipset/AHCI Version 1.30 Supported

SD Card Reader: *Unknown

Audio: *Unknown

CD/DVD: TSSTcorp DVD +/-RW TS-U633J

 

Thanks!

 

---

 

Oh and Bart, I found this which might help you with the prohibited sign with garbled text (check out the fourth bullet point below):

 

"Prohibited" sign on boot

  • Try booting verbose. If it's complaining about OsxAptioDrvFix and relocation block, make sure you're booting from a drive with the latest version of Clover (3270+). This was a common problem with older versions of Clover.
  • If OsxAptioDrvFix doesn't work, try OsxAptioDrv2Fix (but not both at once).
  • For a 2500K, 2600K, or other Core i5 and Core i7 'K' Sandy Bridge CPUs you may need to boot with cpus=1 until you can either install the correct SSDT.aml or finish the install and put NullCPUPowerManagement.kext into /Library/Extensions/
  • If you get all garbled text and/or the message "Still waiting for root device" with the prohibited sign:
    • Try the install USB in every single USB port on your case, motherboard, add-on PCI card, USB hub, etc. and see if it gets farther on any of those
    • If you're using a USB3 stick, use a USB2 stick and try all USB ports again
    • Try booting with cpus=1.
  • If you have USB hub or a port replicator, try putting the install USB in there
  • Double-check SMBios selection: MacPro3,1 may be the most reliable in general

Share this post


Link to post
Share on other sites

Yeah it is weird - I tried using boot option of cpus=1 after trying all usb ports and I make it a little further than you Bart, but I am now encountering the same error you are encountering. 

 

If you try cpus=1, see if you get further in the boot process... If you figure out how to get into the installer, please let us know. :)

 

I'll keep messing with it too.

 

Thanks!

Share this post


Link to post
Share on other sites

Hi guys; thanks for your responses; it's a little bit over my head but I try to read and learn and experiment as much as possible; Now I do need to wait for some spare time again ;)

Share this post


Link to post
Share on other sites

if you follow the guide, you can see than dsdt and ssdt part is only for a running and installed mac os x.

 

please, remove dsdt and ssdt in /efi/clover/acpi/patched

 

don't use cpus=1 (i didn't need it, why should you ?)

 

cheers

Share this post


Link to post
Share on other sites

Hi dudu,


 


I was just going off of the only other information I could find related to the "prohibited" sign and trying all of those options. Using cpus=1 got me further than any of the other attempts, however it still fails of course.


 


I checked and don't have anything in the /efi/clover/acpi/patched folder ... so not sure what is up there.


 


A couple of questions (sorry if they are dumb questions!):


 


- Do we only need to install Clover to the boot hard drive? Not the installer USB?


- How does having an installed version of Mavericks affect this? Can I just do a clean install in any way? ... I don't want to keep Mavericks anyway.


 


Thanks a ton!


 


:)


Share this post


Link to post
Share on other sites

you need to install clover to the usb installer, then boot the installer.

install mac on your target hard drive, (then use disk utility from the installer, erase your mavericks, and install el capitan)

reboot with your usb installer, but choose your freshly installed mac os x

install clover on the hard drive.

 

if you are installing El capitan 10.11.1, you must have clover on version 3320 or 3330.

 

if you'are installing el capitan 10.11.0, you can have a lower version of clover, like 3310.

 

please, update your clover to the lastest version.

if you want me to debug, i need to see your clover folder.

 

cheers

Share this post


Link to post
Share on other sites

Okay thanks dudu,

 

I will continue to try to get it to work out and report my findings once I get the installer going and OS installed. I will post clover folder if I still can't get it to work for some reason.

 

Thanks!

Share this post


Link to post
Share on other sites

Hi; I have tried as proposed; now on a usb2 stick, with your config.plist Dudu; there is nothing as far as dsdt etc in the mentioned directory.

 

When I install, I still end up with the earlier mentioned screen dumps.

 

dud; I will send you a private message for a link to where you can pick up the content of my usb stick for debugging.

 

Wow, it is certainly a nice puzzle  :yes:  !

 

Thanks for the help again...

 

Bart

Share this post


Link to post
Share on other sites

And to Add some specs;

 

My System:

 

Dell E6410

BIOS Version: A16

Processor: Intel Core i5 E6410 2.39 Ghz

Network (Ethernet): *Unknown (AppleIntelE1000e.kext worked on 10.9.5)

Network (WLAN): Dell (Broadcom) DW1510 (BCM94322HM) Wireless Half Card

Graphics: Nvidia NVS 3100M (512MB)/1440x900 @ 60Hz

Memory: 8GB 1333 MHz DDR3

Storage: 250GB SSD/Samsung 850 EVO

SD Card Reader: *Unknown

Audio: *Unknown

CD/DVD: Mat{censored}a DVD+- RW UJ892

 

 

Regards, Bart

Share this post


Link to post
Share on other sites

Well Bart, we have the same Hardware.

(see hardware description in top of guide)

 

After have a look in your clover folder, I have realize that i've forgot something in the tutorial.

 

Added :

 

Copy fakeSMC.kext in /EFI/CLOVER/Kexts/Others

 

This will works better.

Sorry, my bad.

 

I've tried to use intel GMA integrated GPU today.

It can use 1500Mb of memory.

 

i have prepared different patch, but failed for now.

 

with my Bios A11, i have no disable/enble nvidia/intel grpahics options.

someone here with Bios A16 have this option in bios ?

 

cheers

Share this post


Link to post
Share on other sites

Hi Duduclx; Thanks for your response; I will try what you say asap and let you know.

 

I have the A16 firmware in my E6410, and I checked but there is no disable/enable nvidia/intel option or anything like that. Hope you can use the information.

 

Voila merci, et a bientot,

 

Bart

Share this post


Link to post
Share on other sites

hi.

 

Some Updates to the first post:

- updated link to kext

- updated hardware list

- updated clover config (adjust resolution and remove useless nvidia from drop dsdt part)

- updated dsdt patch

: no more manual patch to do

: fixed shutdown issue

: prepared dsdt to be used with intel GMA

- removed outdated package files

 

i've find that the intel GMA from I7 M640 support up to 1,5Go of Vram

so new dsdt patch set it to 1,5Go of Vram

 

for now, when i try to use intel gma, i go till the desktop loading (so all the boot part is good, all drivers loaded),

but that's white (trying to resolve the gpu work) for one second, and got a Crash (reboot).

 

i'm not sure to spend more time on it.

even if i'm not happy about hdmi audio, intel gma qe/ci

and you will surely not about the dock station issue.

 

i still have more hackintosh project:

- update GA-X58-UD3R with ati raddeon 7550 and areca raid card (my home server)

- update the Ativ XE700T1C guide and computer (my wacom stuff to draw like a child)

- Apple G5 case mod with one of this:

: Dell R300 server

: Dell R200 server

: Dell Optiplex 760

- fixing little issue on HP 820 G2

and more, like transform a second optiplex 760 as synology server with lastest DSM

recycle old internal/external screen, raspberry, dell servers and other stuff to create a custom digital board, low table and more ...

 

yeah, my guest room looks like a computer's graveyard.

Share this post


Link to post
Share on other sites

last minute search:

HP elitebook 8540P have the same CPU, with nvidia NVS5100M gpu.

8x60p models are similar.

 

You surely know that probook installer clover edition have script to install and configure a full working hackintosh

let's have a look to it:

https://bitbucket.org/dhnguyenit/hp-probook-installer-clover-edition

and there's surely good information in the rehabman's repo:

https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch

 

the intel gma integrated gpu support only 2 display.

and here a generic guide for intel gma:

http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

 

cheers

Share this post


Link to post
Share on other sites

hi.

 

Some Updates to the first post:

- updated link to kext

- updated hardware list

- updated clover config (adjust resolution and remove useless nvidia from drop dsdt part)

- updated dsdt patch

: no more manual patch to do

: fixed shutdown issue

: prepared dsdt to be used with intel GMA

- removed outdated package files

 

i've find that the intel GMA from I7 M640 support up to 1,5Go of Vram

so new dsdt patch set it to 1,5Go of Vram

 

for now, when i try to use intel gma, i go till the desktop loading (so all the boot part is good, all drivers loaded),

but that's white (trying to resolve the gpu work) for one second, and got a Crash (reboot).

 

i'm not sure to spend more time on it.

even if i'm not happy about hdmi audio, intel gma qe/ci

and you will surely not about the dock station issue.

 

i still have more hackintosh project:

- update GA-X58-UD3R with ati raddeon 7550 and areca raid card (my home server)

- update the Ativ XE700T1C guide and computer (my wacom stuff to draw like a child)

- Apple G5 case mod with one of this:

: Dell R300 server

: Dell R200 server

: Dell Optiplex 760

- fixing little issue on HP 820 G2

and more, like transform a second optiplex 760 as synology server with lastest DSM

recycle old internal/external screen, raspberry, dell servers and other stuff to create a custom digital board, low table and more ...

 

yeah, my guest room looks like a computer's graveyard.

 

 

Although we have different hardware we do have very similar CPU/GPU generation.  Just couple quick questions.  How did you get shutdown/Seep/Wake to work and Ricoh PCI SDcard slot?   I think yours is NEC no?  I also had to make a USB injector otherwise none of the USB ports were working.  I have tried everything.  Shutdown worked in OS X 10.11.1 but once I updated to 10.11.2 it stopped.  Sleep/Wake  stopped since 10.11.0. Sleep/wake/shutdown work fine in  Yosemite 10.10.5.  What happens is it states to sleep, screen goes black and it never sleeps nor wakes.  Screen stays black.  Same with shutdown, it looks like its shutting down, I see verbose unloading everything but screen stays black and fans still turn. My DSDT has been fully patched obviously working in Yosemite.  Is there some new DSDT patches to fix this shutdown, sleep and wake issues?

 

My Laptop is Asus G51Jx-X1, CPU=i7-720Qm, GPU= Nvidia GTS360M, only discreet no intel GPU.  Using Mac Model MacBookPro6,2 for best CPU/GPU Power management.

 

Thanks

Share this post


Link to post
Share on other sites

Arrandale cpu use appleintelcpumanagement for sleep/wake.

You may need nullcpupowermanagement for your system.

 

For sd card, i use a patched voodoosdhc.

This doesn't work with all ricoh sd card reader.

 

About shutdown and usb, you need better dsdt patch.

Usb have changed with El capitan.

 

Please, open new topic about your system and problem.

Post ioreg, original and patched dsdt, the pci/hardware list.

 

You can send me a pm to share me your new topic.

 

I will not help you in this topic because of that's over topic.

 

Cheers

Share this post


Link to post
Share on other sites

Hi; returned home so the next couple of days I will continue on this project...

 

Bart

Share this post


Link to post
Share on other sites

Hi Duduclx and others; Was gone working but have some time again now. Merry Xmas !!!

 

I copied  fakeSMC.kext in /EFI/CLOVER/Kexts/Others as requested.

 

If I install now I get a slightly different screen before I get the Prohibited screen again; 

 

Here is the screen dump just before the text gets distorted and the prohibited sign appears....

 

Bart

 

 

 

post-1584845-0-71503500-1451130104_thumb.jpg

Share this post


Link to post
Share on other sites

Hi Guys; Am starting from scratch again just to be sure. Question; Do I put in the E6410 bios the Boot List Option on UEFI or Legacy ? Until now I had it on Legacy option.

 

Duduclx; maybe I can put a usb stick on the post for you to check ? Tuesday I am gone working for another six days or so so the process getting there is slow :(...

 

 

Have a nice sunday, 

 

Bart

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By le332313
      Can someone share the dell 5593/5493 EFI ? I try to fit the graphics driver, but it not working please help me thanks
       
    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/yxsw7d3t
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/yxsw7d3t
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
       
      Use these kexts, enable XHCI port limit patch
       
      USB INTEL SERIE 400.zip
       
      and follow this tutorial for remap USB ports
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By Nomade
      Hello All,
       
      It's been a while that I am trying to update my system to 10.15.16.
      The install seem to start, then at reboot time I only see the Normal boot and the Recovery option from the Clover boot menu.
      None of those 2 allow to complete the update.
       
      Is there any ways to force it to install and/or show the "Update" option on the Clover boot screen?
       
      PS: I'm using Z97-Gaming-3
    • By Damx
      The specs CPU: Intel® Core™ i3 Processor 8130U, 2.20 GHz (Kaby Lake Refresh) Chipset: Intel® 300 Series Graphics: Intel® UHD Graphics 620 Display: 21.5'' 1920x1200 RAM: DDR4 PC2400 4GB SSD1: M.2 PLEXTOR (with original Windows 10) SSD2: SATA SAMSUNG 850 EVO (for macOS) Sound: Realtek ALC269 WiFi / BT: Intel 3168 NGW Realtek Card-reader  
       
      Not working
      WiFi: Intel 3168 NGW Realtek Card-reader  
       
      Pre-Installation
       
      I will not go through the basics since it is explained in details here on this site. Briefly, the process is to:
      Get Clover Get Catalina macOS installer Create USB with 2 MBR partitions (FAT32 for Clover and HFS+J for the installer)  
       
      Required kexts
      AppleALC.kext Lilu.kext RealtekRTL8111.kext VirtualSMC.kext WhateverGreen.kext  
       
      Config.plist
      I used the one provided by RehabMan called config_HD615_620_630_640_650.plist. Download it from GitHub. It has almost everything you will need with only few edits for audio.
      Edits:
      [CPU] Make sure there is lilcpu=9 setting in boot arguments needed for Kaby Lake R CPU to be recognised correctly. [GPU] Make sure there is a patch GFX0 to IGPU under ACPI->DSDT [GPU] Under Devices->Properties->PciRoot(0)/Pci(0x02,0) make sure that the AAPL,ig-platform-id value is 00001B59, and the device-id value is 16590000 [AUDIO] Under Devices->Properties->PciRoot(0)/Pci(0x1f,3) set the layout-id to 40 and the device-id to 70A10000 [SMBIOS] Set Mac model ID is iMac19,2  

       

       
      Notes
      For some reason with latest version of Clover the install partition was not visible. If you run into the same issue you can downgrade Clover to r5103, which worked perfectly. WiFi / BT Intel 3168 NGW needs to be replaced if one needs WiFi. Someone mentioned that to get HDMI work properly you may need to change AAPL,ig-platform-id value to 00001659 for PciRoot(0)/Pci(0x02,0) - not my case but may be considered if you get this issue. Don't forget to generate your serial and other SMBUS values before signing in with iCloud services.  
       
    • By tonyx86
      This thread for installing Catalina on the Dell Latitude E6410 WITH NVIDIA GRAPHICS (BIOS A17, NVidia 3100m) will help you install a fresh installation of Catalina on your Dell Latitude E6410, it will help you upgrade from 10.15.2 to 10.15.x (if you originally installed Catalina from this thread) and it will also help you upgrade from Mojave 10.14.6 if you have already installed Mojave by following the instructions here.  The instructions in this first post assume that you are installing Catalina in an APFS container.  If you are curious about the evolution of this solution and how sleep/wake was solved, review the Mojave installation thread.
       
      Important: This Thread is NOT intended to help you install macOS on a Latitude E6410 with Intel HD Graphics (without Nvidia graphics).  The DSDT attached to this first post (in E6410-Catalina.zip) is VERY SPECIFIC to the Nvidia graphics implementation and has not been edited for HD Graphics - there are elements required for HD Graphics that are missing from the attached DSDT and there are DSDT mods that have not been tested with HD Graphics.  Also, the kexts attached to this first post are specific to a Broadcom Wi-Fi card which must replace the original Intel Wi-Fi card.
       
      This first post will be modified to reflect lessons learned and to reflect the most current working state of my Latitude E6410 (with NVidia 3100m discrete graphics) running Catalina.  Issues, observations and performance tips are recorded toward the bottom of this first post.  My recommended CLOVER configuration is specified toward the bottom of this first post.
       
      *** If you want help with your installation, please post your issue along with problem reporting files generated using @black.dragon74's problem reporting tool.  Google 'GENERATE PROPER PROBLEM REPORTING FILES black.dragon74' to find it. ***.  If Catalina's Read-Only protections block your installation of black.dragon74's gen_debug script, please copy the attached gen_debug script to your Desktop, change script properties with the terminal command 'chmod a+x ~/Desktop/gen_debug' and run the script from your Desktop.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) Wi-Fi: Broadcom BCM 94352HMB (replaced original Wi-Fi card) BIOS (version A17) configured as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC:Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace:Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;   
      Versions of the software used in this installation are listed below the installation steps.  EFI and kexts for Catalina are attached to this first post in E6410-Catalina.zip.  CLOVER configuration is specified below the installation steps.  You MUST BE LOGGED-IN to download attachments from this forum.
       
      Wi-Fi connection to an Access Point is delayed when using AppleALC for sound.  Do not use Apple ALC.  Use VoodooHDA pkg 2.9.2 v15 for sound.
       
      Steps to install Catalina on a Dell Latitude E6410 (BIOS A17, NVidia 3100m)
       
      If you want to upgrade to 10.15.6, see instructions at this post.
       
      If you want to upgrade to 10.15.5, see instructions at this post.
       
      If you want to upgrade to 10.15.4, see instructions at this post.  
       
      Follow instructions below for 10.15.2 and 10.15.3.
       
      Make sure that your system matches my system description above (including BIOS version, Wi-Fi card, BIOS settings) If performing an upgrade from Mojave or a previous version of Catalina, backup your Mojave or Catalina partition! (Carbon Copy or similar) Download Catalina Installer Download DosDude Catalina Patcher Use DosDude Patcher to create Catalina USB Installer Delete LegacyUSBInjector.kext (we're using @RehabMan's USBInjectAll.kext with custom SSDT) and delete SIPManager.kext (CLOVER is managing SIP) from Catalina USB Installer's /Library/Extensions folder Copy all but the FakeSMC sensor kexts in E6410-Catalina.zip (attached) LE folder to the Catalina USB Installer /Library/Extensions (copy all kexts (including FakeSMC.kext) but not the FakeSMC sensor kexts) Install CLOVER Bootloader (Legacy) on USB Installer using the EFI in the E6410-Catalina.zip (attached).  Use the CLOVER configuration specified below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Reset your Latitude E6410 NVRAM by doing the following (this may be important if you're making changes to your existing EFI and won't hurt anything if you're not making any changes) turn-off your laptop remove A/C power and main battery press and hold the power button for 30 seconds restore A/C power and battery Boot your Latitude E6410 from the Catalina USB Installer that you created in steps 5-8. Select "Reinstall macOS" (note that I have existing installations of Mojave and High Sierra on my Latitude E6410, so it's possible that this menu item changes to "Install macOS" if you don't have any previous macOS installations). Select your Catalina destination partition (which will be your Mojave or previous Catalina partition if you are upgrading) After the Catalina Installer reboots the first time, boot from the "macOS Installer" partition on the disk that you selected as your Catalina destination (not the macOS installer on the USB) After the Catalina Installer reboots the second time, boot the Catalina macOS Installer on the USB Select the Post Install Patcher utility Select only the following Post Install Patches (no other patches / options) Install Patch Updater Legacy Video After the Post Install Patcher reboots,  boot from the newly installed (or upgraded) Catalina partition and complete the macOS configuration Remove these kexts (if they exist) from /Library/Extensions: LegacyUSBInjector.kext, LegacyUSBVideoSupport.kext and SIPManager.kext If you are performing a fresh installation of Catalina: Install CLOVER (LEGACY - NOT UEFI) on your boot disk and configure EFI using files in the attached E6410-Catalina.zip.  Use the CLOVER configuration below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Install all kexts in the attached E6410-Catalina.zip LE folder to your /Library/Extensions folder. Copy HWMonitor from the application folder in the attached E6410-Catalina.zip to your Applications folder. Install VoodooHDA (I installed using the Classic method) Skip to Step 21 If you are upgrading from a previous version of Catalina using the instructions from this thread or from Mojave that you installed using the instructions here: Replace 3rd-party kexts in EFI/Clover/kexts/Other with those in the attached EFI folder.   Replace EFI/Clover config.plist with the attached config.plist (Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values) Replace EFI/Clover/ACPI/patched with the files in the attached EFI/Clover/ACPI/patched Replace 3rd-party kexts in /Library/Extensions with those in the attached LE folder Remove VoodooSDHC.kext from /Library/Extensions Re-install VoodooHDA if necessary (I installed using the Classic method for Catalina) Ensure PROPER kext installation: If you're manually installing kexts in /Library/Extensions, make sure that you execute the following (in terminal) cd /Library/Extensions sudo chown -R root:wheel *.kext sudo chmod -R 755 *.kext sudo kextcache -i / After you execute 'sudo kextcache -i /' you should observe that ALL kexts are allowed.  If not, your kext directory attributes are probably incorrect.  Repeat kext installation and try again. Reboot from your new/upgraded Catalina partition Welcome to macOS Catalina! Change the keyboard type to ISO (System Preferences > Keyboard > Change Keyboard Type) Swap the Command and Option keys (System Preferences > Keyboard > Modifier Keys) Set hibernatemode: In terminal, execute sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo touch /var/vm/sleepimage sudo chflags schg /var/vm/sleepimage  
      Version Info at the time of this writing:
      Catalina Installer 10.15.6 CLOVER r5119 DosDude Catalina Patcher: v1.4.4 Lilu.kext 1.4.7 (not yet included in the attached E6410-Catalina.zip archive.  Get latest version here) AirportBrcmFixup.kext 2.0.9 (not yet included in the attached E6410-Catalina.zip archive.  Get latest version here) BrcmFirmwareData.kext 2.5.4 (not yet included in the attached E6410-Catalina.zip archive.  Get latest version here) BrcmBluetoothInjector.kext 2.5.4 (not yet included in the attached E6410-Catalina.zip archive.  Get latest version here) BrcmPatchRAM3.kext 2.5.4 (not yet included in the attached E6410-Catalina.zip archive.  Get latest version here) IntelMausi.kext 1.0.3 (Not IntelMausiEthernet.kext)
      EFICheckDisabler.kext 0.5
      VoodooHDA.kext 2.9.2 v15 (NOT AppleALC)
       
      What is not working (that was working in Mojave)
      SD Card Slot (had to remove VoodooSDHC.kext which caused system freeze on wake)  
      Known Issues and Their Solutions
      (Not yet included in E6410-Catalina.zip archive attached to Post #1) There are new versions of acidanthera kexts as described here.  I hadn't noticed any issues with the older kexts, so the kexts are not yet included in the E6410-Catalin.zip archive attached to this first post and will be included in a future update to the E6410-Catalina.zip archive. (Solved - no further work required) Clover r5118 requires the config.plist key <key>NoDefaultProperties</key><false> to permit macOS to boot with Clover's "Inject Nvidia" = True.  See details here.  config.plist in the attached E6410-Catalina.zip archive includes this change. (Solved - no further work required) EFICheck is loaded.  Solution is to install EFICheckDisabler.kext which you can get here.  EFICheck.kext is included in the attached E6410-Catalina.zip archive. (Solved - no further work required) Some users experience display issues.  The solution is to remove Device (PNLF) from the DSDT.  Use the attached DSDT.  Removal of PNLF will disable sleep on lid closure.  Device (PNLF) can be added without modifying the DSDT by enabling the Clover PNLF ACPI patch.  The attached Clover config.plist enables the PNLF DSDT patch.  Disable the Clover PNLF patch if you experience display issues. (Solved - no further work required) USB sleep/wake power IORegistry keys are not injected (not included in Mojave's or Catalina's IOUSBHostFamily.kext).  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. (No solution yet) Brightness slider does not work in System Preferences > Displays.  Brightness is easily controlled with Dell brightness keys.  There is some work on this later in this thread, but I will not be solving this as I'm content with the Dell brightness keys (and Ambient Light Sensor works to auto-adjust brightness). (No intention to solve) Display Settings in System Preferences are "garbled" when bright slider is visible.  This is a known issue with the legacy graphics patch and does not affect laptop operation. I continue to refine the DSDT and CLOVER config.plist to optimize my Latitude E6410 for multi-booting between various macOS versions (High Sierra, Mojave and Catalina at the time of this writing). If you upgrade your Latitude E6410 EFI using my attached EFI, you may find that your Latitude E6410 is stuck in a boot-loop that ends in a white screen and reboots.  Clear your system by doing the following: turn off your laptop, remove A/C power, remove the main battery, press and hold the power button for 30 seconds, restore A/C power and battery, boot normally.  I have only found this to be necessary (very rarely) after making an EFI change, but you may find it helpful if making kext changes in /Library/Extensions as well. (Solved - no further work required) Brcm firmware does not update when using BrcmFirmwareRepo.kext in /Library/Extensions.  Solution is to install BrcmFirmwareData.kext and BrcmPatchRAM3.kext in E/C/k/O with Clover "Inject Kexts" = YES. (Solved - no further work required) Laptop does not sleep when closing lid.  Solution appears to be a combination of adding Notify (LID0) code to Method (BTNV) and adding Device (PNLF) in the DSDT. I am using the same EFI for High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.3 and it works in all three macOSes. (No solution yet) No SD Card Slot (had to remove VoodooSDHC.kext) - I read somewhere that there is a solution that does not require any kexts (just a DSDT edit).  Haven't yet implemented this fix. (Not a problem that needs to be solved - leaving for historical purposes.  I am running Catalina without this.) - IOHWControl does not load under GFX0 (as observed in IORegistryExplorer).  Solution (if it needs to be solved) is to install AppleHWSensor.kext from a DosDude-patched Mojave /S/L/E in Catalina's /L/E.  Copy and install your own or use the kext attached to this post. (Solved - no further work required) Wi-Fi connection is delayed until a minute or so after boot - Use VoodooHDA and NOT AppleALC (Solved - no further work required) External USB ports do not work after waking from sleep (S3) - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Boot and shut-down time of Catalina is slower than Mojave - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Wi-Fi is not immediately available at OS startup - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Laptop freezes on wake - Remove VoodooSDHC.kext from /Library/Extensions  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z (I haven't noticed this issue for a while since I completed DSDT edits for Mojave, but keeping this here for historical purposes)  
      CLOVER Installation: Use these configuration options (These configuration options configure Clover for LEGACY BIOS - NOT UEFI)
      Install Clover in the ESP Boot Sectors Install boot0af in MBR Clover for BIOS (LEGACY - NOT UEFI) booting Clover EFI 64-bits SATA BIOS Drivers, 64-bit Recommended drivers FSInject File System drivers ApfsDriverLoader Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane After clicking "Continue", if prompted with "This Clover package is incompatible with this version of macOS," install anyway  
      After CLOVER installation is complete Copy the following from the attached E6410-Catalina.zip ACPI patched contents config.plist (change XX-MASKED-XX values to your own) kexts/Other (remove all other kext folders) Remove christmas and new year folders from themes (if present)  
      Screenshots
       
      Credits
      Thanks to those who contributed to my Mojave solution and to the DosDude team (for the incredible macOS patchers), I think this Catalina installation was the easiest macOS installation that I have experienced (so far).  Many thanks to @Slice and his team for the incredible work on CLOVER and for continuing to support old legacy systems like this.  Also, thanks to @Mieze and @headkaze and others I'm sure for maintaining the Brcm kexts.  And finally, I still prefer to manually apply patches to the DSDTs in my systems.  CLOVER offers extensive patching functionality, but I'm old-school and like to have an error-free, fully-patched DSDT with a simple CLOVER config.plist.  I think that this manual DSDT patching approach (which required an extensive review and debugging of the original unpatched DSDT in this thread) is the reason that this Latitude E6410 is such a perfect MacBookPro6,2.  Thank you @RehabMan for being a great teacher and for always insisting on problem reporting files .
       
       
      AppleHWSensor.kext.zip
      gen_debug
      E6410 Catalina-5v2.zip
×