Jump to content
Sign in to follow this  
Followers 0
DarkArkham93

El Capitan on ASUS Maximus VII Formula, Intel Core i7-4790k

2 posts in this topic

Recommended Posts

Newb here, but here we go, need some help from guys who know what they are doing.

Trying to install El Capitan on my first ever "Hackintosh"

Specs are:

ASUS Maximus VII Formula Z97, 

Intel Core i7-4790k,

16GB G.Skill Ripjaws RAM, 

MSI Lightning GTX 770 2GB,

1050 Watt EVGA GS PSU, 

NZXT H440 Case

I have made a USB Drive with Terminal (createinstallmedia) of El Capitan on an 8GB Flash Drive which was SUCCESSFUL. I am prepared to install Clover Bootloader but am overwhelmed by the options. Can anyone give me any advice on what options to select under "Customize" for my specific build? I heard I need a DSDT.aml file? How do I make one of those for my build? Also, based on my specs, what kexts and Boot Args would you guys recommend to help me get to the installer and post install? 

Thanks for the consideration.

Share this post


Link to post
Share on other sites
Advertisement

Newb here, but here we go, need some help from guys who know what they are doing.

 

Trying to install El Capitan on my first ever "Hackintosh"

 

Specs are:

 

ASUS Maximus VII Formula Z97, 

 

Intel Core i7-4790k,

 

16GB G.Skill Ripjaws RAM, 

 

MSI Lightning GTX 770 2GB,

 

1050 Watt EVGA GS PSU, 

 

NZXT H440 Case

 

I have made a USB Drive with Terminal (createinstallmedia) of El Capitan on an 8GB Flash Drive which was SUCCESSFUL. I am prepared to install Clover Bootloader but am overwhelmed by the options. Can anyone give me any advice on what options to select under "Customize" for my specific build? I heard I need a DSDT.aml file? How do I make one of those for my build? Also, based on my specs, what kexts and Boot Args would you guys recommend to help me get to the installer and post install? 

 

Thanks for the consideration.

Try to read this one http://clover-wiki.zetam.org/configuration

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Andres ZeroCross
      First my Old Threads is here http://www.insanelymac.com/forum/topic/308178-el-capitan-wih-i7-6700-skylake-gigabyte-ga-z170-hd3-palit-jetstream-gtx960/

      My Computer Specifications
      1. Processor : Intel Core i7 6700
      2. Motherboard : Gigabyte Z170-HD3
      3. VGA Card : Palit Jetstream GTX960 4GB DDR5
      4. Wifi Card ; TP-Link TL-WDN4800
      5. PCI-E to Sata = Bafo PCI-e to 2 Sata3 and 2 e-Sata
      6. PCI to USB 2.0 - NEC Chipset
      7. Main Harddisk Harddisk : Fujitsu SSD 120GB + Seagate 500GB that plug into Bafo PCIe to Sata3
      8. Other Harddisk : Natno SSD 12GB, 2x Seagate 2TB, Seagate 500GB, all of it are plug into onboard Sata Chipset Controller (But Unknow at El Capitan / 10th Intel Chipset)
      9. RAM : Team 3000Mhz 8GB (2x4GB)
      10. Display : Asus VN248H
      11. Clover version : 3280

      My Step :
      1. Because Internal Sata Chipset and USB 3.0 are not supported yet, so i clone my Fujitsu 120GB SSD from my Hacbook Asus X455LA that already installed El Capitan Build 15B30a with Carbon Copy Cloner
      2. I use MacPro 6.1 as SMBIOS and use FakeCPUIID of Intel 4790k (0x0306C3)
      3. Remove CPUSensor.kext from "FakeSMC.kext/Contents/Plugins" if you don't do this it will be stuck at ACPI log verbose.
      4. I try boot from USB that already install Clover 3280 and it boot. I use "-v nv_disable=1 dart=0"
      5. Then at desktop, i install nvidia web driver 346.03.02F02 (before that you need to modif it,, use pkgutil --expand bla bla ba,, google it and change required os to "15B" then use pkgutl --flatten bla bla to repackage) then i change info plist from AppleGraphicsControl.kext/Contents/Plugin/AppleGraphicsDevicePolicy.kext/Contents/info.plist and change line that contain board-id of MacPro 6.1 from Config2 to none
      6. Then i install that kext,, and restart
      7. i use "-v dart=0 nvda_drv=1 and it will need more time than usual to get login form,, yeah i did it. But there is some bugs
       
      Bugs :
      1. Internal sata is not function
      2. USB 3.0 is error too,,  at verbose i see "error mantisa log"
      3. Sometimes my system get freeze for a few seconds. I thinks this is error from Nvidia web driver,, i see nvdia error log from "sudo dmesg"

      At last,, sorry for my bad english
      Thanks
       
      This is for screenshots
       

       

      I upload my IOREG and DSDT
       
       
    • By simras
      Hello,

      I am trying to make a new Hackintosh under 10.13 with this specs:
      i7 6800K,
      Asus X99-E
      Asus GTX 970

      But the problem is that I can't pass those errors :
      - couldn't allocate runtime area
      - end randomseed ++++++++++++++ _

      I have always passed this thing on all hackintoshs that I have done, but here, impossible.

      Tried those tests :
      - AptioMemoryFix alone,
      - AptioMemoryFix with EmuVariableUefi and RC Scripts,
      - OsxAptioFix2Drv-free2000 with EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts.

      I have tried all this with npci=0x3000 that I have never used before instead of npci=0x2000

      I have done an Hackintosh on Asus X99 Deluxe II and it pass with AptioMemoryFix with EmuVariableUefi and RC Scripts....

      I have tried to reset NVRAM with F11.

      I have tried with 1 RAM stick that I have indicate in the SMBIOS :
      https://hackintosher.com/forums/thread/mapping-ram-and-dimm-slots-on-a-hackintosh-with-clover-smbios.365/
       
      I have follow KGP guide for X99 :
       
      The BIOS settings are exactly the same.

      I link my CLOVER folder.

      Thank you.
      CLOVER.zip
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
      BaseSystem_PLK.tool_Catalina.zip
    • By fusion71au
      Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5051 for VMware.zip". Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
×