Jump to content

6 posts in this topic

Recommended Posts

Hi guys, 

If have a couple of question in order to solve this problem

I manage to set a config file on clover that i think works well with my hackintosh, but some times a got this kernel panic, the strange thing is that after boot a couple of times the problem seems to solve itself , the mac boot and all works well

 

this is the error

IMG_1459.jpg

Can some one help me ?

This is my config

 

I don't know how to setup clover to download the dump file, sorry

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
				<key>AddIMEI_80000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<true/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>FixShutdown_0004</key>
				<true/>
				<key>NewWay_80000000</key>
				<true/>
			</dict>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
		</array>
		<key>HaltEnabler</key>
		<true/>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>kext-dev-mode=1 rootless=0 ncl=262144</string>
		<key>CustomLogo</key>
		<false/>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>LastBootedVolume</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>7</integer>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>No</string>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Hide</key>
		<array>
			<string>BOOTX64.EFI</string>
			<string>Windows</string>
		</array>
		<key>Language</key>
		<string>en:0</string>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<true/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<true/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>Theme</key>
		<string>Mavs Style</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelHaswellE</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>External icons patch</string>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>BooterConfig</key>
		<string>0x28</string>
		<key>CsrActiveConfig</key>
		<string>0x67</string>
		<key>ROM</key>
		<string>UseMacAddr0</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>02/29/08</string>
		<key>BiosVendor</key>
		<string>Apple Inc.</string>
		<key>BiosVersion</key>
		<string>MP31.88Z.006C.B05.0802291410</string>
		<key>Board-ID</key>
		<string>Mac-F42C88C8</string>
		<key>BoardManufacturer</key>
		<string>Apple Inc.</string>
		<key>BoardType</key>
		<integer>11</integer>
		<key>ChassisAssetTag</key>
		<string>Pro-Enclosure</string>
		<key>ChassisManufacturer</key>
		<string>Apple Inc.</string>
		<key>ChassisType</key>
		<string>06</string>
		<key>Family</key>
		<string>Mac Pro</string>
		<key>Manufacturer</key>
		<string>Apple Inc.</string>
		<key>Memory</key>
		<dict>
			<key>Channels</key>
			<integer>2</integer>
		</dict>
		<key>ProductName</key>
		<string>MacPro3,1</string>
		<key>SerialNumber</key>
		<string>CK9163NRXYL</string>
		<key>Trust</key>
		<false/>
		<key>Version</key>
		<string>1.0</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Detect</string>
		<key>InjectSystemID</key>
		<true/>
	</dict>
</dict>
</plist>

Share this post


Link to post
Share on other sites
Advertisement

usb 3.0 typical problem in el capitan , unplug all your usb devices then turn on your pc , then only connect your keyboard and mouse , then after you login into your account , plug any usb flash drive or external hard drive to see if you get the kernel panic again. sometimes you get a kp instantaneously and some times you have to wait a little , make sure to copy and paste files into the flash or external drive that will trigger the kp almost immediately , then you will know that is the usb causing the kp , there are a few options and choices , you can go to the bios and disable usb 3.0 , you can patch your dsdt or you can use a clover patch that disable the usb 3.0 , i'm 99.9 that the problem is usb related , make sure your try all your usb ports to see if one of them , some of them or all of them are causing the kp.

Thanks !!

But my mother is old i don't have USB 3.0 :(

I'm looking to change my mother

Share this post


Link to post
Share on other sites

As iamtheonlyone4ever said, the USB ports are causing the KP. There are new USB ports restrictions introduced in El Capitan that are a bit hard to solve sometimes. To fix this you'll need to work on your DSDT and rename the EHC1 and EHC2 devices (and all other instances) to EH01 and EH02 respectively.

 

There are injector kexts as well that override those restrictions to match your own hardware but you'll probably need to customize one for your system.

 

Alternatively you may try different SMBIOS profiles until you find one that resembles your own ports, or at least let you boot.

Share this post


Link to post
Share on other sites

Thanks Maniac10

 

is painfully obvious that is the usb , just look at the kp and you see usb every where , let me ask you something , that kernel panic is before you install El Capitan "loading the installer"

 

or after you already have installed El Capitan

 

are you trying to install it or it is already installed 

 

and one final question if you don't mind , are you installing from a usb flash or from another internal hard drive 

 

ok here is my susgestion , do not use a flash drive to install , try to install using another internal hard drive

 

if you have a  spare one

 

good luck

Thanks for the info guys

I did the install with a second Hard drive, in fact i disconnect all other drives but the boot and the installer do the "upgrade" and then go back and connect all the others drives back again

i have a couple of restart with no issue , and never a KP with the mac working, only in the boot process

i will try the fix and come back to you guys

Thanks a lot !!

Regards

Share this post


Link to post
Share on other sites

Well guys

As i say in other of my post i manage to solve the problem, i did more than 10 restart with no issue

 

When maniac10 told me to use a new version of a kext i realice that i have kext doing the clover job, so i removed

 

this are the usual suspects  :hysterical:

 

So i went to the S/L/E and move to a backup location all this kext

 

AHCI_3rdParty_eSATA.kext

AHCI_3rdParty_SATA.kext

AHCIPortInjector.kext

AppleMobileDevice.kext

FakeSMC.kext ( i use the new one from clover)

GenericUSBXHCI.kext

HDAEnabler7.kext

IOAHCIBlockStorageInjector.kext

JMicron36xATA.kext

JMicron36xeSATA.kext

JMicron36xSATA.kext

LegacyAppleAHCIPort.kext

NullCPUPowerManagement.kext

RealtekRTL8111.kext

 

And leave the new version of

RealtekRTL8111.kext

FakeSMC.kext

 

Download and install the last clover version from the developer site

Then put the config file on the clover on the EFI partition

rename the EFI folder on the boot drive (HFS+)

and restart

 

And that solve almost all my problems  i still have most of my drives with the orange icon like i can eject them.

And a performance problem with plex and streaming over and apple TV

but all the rest works just fine

Thanks for the help

Regards

Share this post


Link to post
Share on other sites

Do you have a solution for this one?

panic(cpu 0 caller 0xffffff8818acf334):"Unable to find driver for this platform : \"ACPI\".\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.40.184/lokit/Kernel/IOPlatformExpert.cpp:1665

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Clover r4961 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4961 for VMware.zip". Mount Clover-v2.4k-4961-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Coke2g
      I've been happily using macOS Sierra 10.12.6 (16G29) successfully for more than a year (all things working), but now I replaced my old Asus GTX 750 Ti card with a new Zotac GTX 1060 6GB, and it get stuck on boot just before going to the login screen (verbose boot screen attached).
       
      I've updated Clover with all its kexts, and reinstalled the Nvidia Web Drivers (using nvidia-update script), but it's still stuck in the same part. I can only enter using nv_disable=1
       
      My current Hackintosh specs:
      Motherboard MSI H110M Gaming (MS-7994) (LGA 1151/Intel H110/DDR4/SATA 3 & USB 3.1) CPU Intel Core i5-6600 6M Skylake Quad-Core 3.3 GHz LGA 1151 65W RAM HyperX FURY 16GB (2 x 8GB) DDR4 2133 (PC4-17000) HX421C14FBK2/16 Video Zotac GTX 1060 6GB SSD Samsung SSD 850 EVO 250GB HDD Western Digital Black 1TB (32MB Cache) (WDC WD1001FALS-00J7B1)  
      I've read that maybe it can be fixed patching the DSDT, but I don't know how to do it.
       
      My RunMe.app generated zip file and verbose boot screen are attached.
       
      Any kind of help is appreciated. Thanks.
      Send me Coke-iMac.zip

    • By RagK
      Hey , I have installed MacOS Mojave on my desktop
       I am facing issue in which the front pane USB ports on my cpu are working only after a reboot.
       
      When I start my PC after a shut down the USB ports docent seem to work as USB pen drive is not detected 
       
      Please Help
    • By SoThOr
      This was spurred on from a discussion in the Clover General thread. Where there was a debate on bcdedit being able create/read/edit (U)EFI Boot entries. I didn't think it appropriate to post all this information there and somebody may want to make use of this and its likely to get lost in that massive thread.
       
      Out of curiosity I decided to see if I could create an EFI entry using bcdedit. What can I say I like a challenge.  Whilst is not a documented method by Microsoft, as it turns out in a round about way it IS possible to create an EFI entry using bcdedit and these are the steps I went through to add UEFI Shell located on a USB stick to the EFI entries. 
       
      Third party software is available that can create and edit UEFI entries from Windows with better support and more features. I'm just making this information available in case those options are unavailable. 
       
      DISCLAIMER - This is not a supported method. Use at your own risk. I recommend backing up your BCD/Firmware variables/settings beforehand.
       
      1) Copy {bootmgr} entry.
      C:\Windows\System32>bcdedit /copy {bootmgr} /d "UEFI Shell" The entry was successfully copied to {34e8383c-73a7-11e9-9cb0-94de8078a7b5}. 2) Edit the new entry using the new GUID bcdedit generated in the copy step.
        a) Set the device and path for UEFI shell on my USB stick.
      bcdedit /set {34e8383d-73a7-11e9-9cb0-94de8078a7b5} device partition=G: bcdedit /set {34e8383d-73a7-11e9-9cb0-94de8078a7b5} path \EFI\SHELL\SHELLX64.efi   b) Clean up some of the stuff that was copied from {bootmgr} (optional as far as I can tell, just makes things tidier in bcdedit)
      3) Put the new EFI entry first in boot order. (optional)
       
      After completing the steps above, here is what "bcdedit /enum firmware" shows:
       
      I shutdown my computer and when I turned my computer back on it booted up into UEFI Shell. After exiting the shell my PC went on to boot Windows.
      Here is the resulting dump using "bcfg boot dump -v" from that shell:
       
      You may notice that the shell shows as "Windows Boot Manager" in the bcdedit output. This I believe is because of the "WINDOWS" at the beginning of the option data that bcdedit added to the EFI Boot entry. I also believe this why bcdedit shows my Windows 8 installation as "Firmware Application" because it has no option data. I don't know how to remove this data using bcdedit nor do I know how the option data, that bcdedit adds, will affect other EFI applications.

      There might be a way to create the EFI entry without copying the Windows entry but if there is I'm unable to find any documentation on how one would do so. If you use the create command then it just puts it in the BCD and I'm unaware of a way to tell it to create it in EFI instead, other than by doing the above.
    • By kromakey
      Hello ,
       
      Just changed my CPU to a E5450 to be able to Run Mojave , but now I can not run not even EL Capitan    (it was working well with CORE2DUO)
       
      I already flashed a modified bios to be able to recognise the CPU.
       
      here some print screens from Verbose :
       
      https://photos.app.goo.gl/kqWauSu5GZ9Kogxh7
       
      https://photos.app.goo.gl/F6kL5YbiFBqLcGyz6
       
       
      AZUS P5K PRO  - CPU E5450 - NVIDIA 9600GT - 5G RAM 
       
       
      ANY HELP is APPRECIATED
       
      Thanks/Obrigado
       
      Kromakey 
       
       
       
       
×