Jump to content
arsradu

[HOW TO] Fix second stage boot logo and loading bar for some dedicated desktop video cards

389 posts in this topic

Recommended Posts

@Mirone - I will send all relevant files tomorrow.

@arsradu - the first major difference is you're not using nvidia drivers whereas I am. Even I get a full second stage without the drivers. I was going through the difference when I thought of trying your suggestion of minimal edit to the xml. I must have done something wrong. All I could see was the boot animation which refused to go away. I got stuck so bad that the installer usb did not help. I had to physically connect the ssd to another machine edit the config plist in that and then it worked. Lucky it was a Sunday. I would have been in a soup otherwise.

Anyways I got another ssd to which I will install a fresh 10.11.4 and continue tests & trials on that.

Hi William,

 

Sorry to hear about your issues. It reminds me of my first days as a hackintosh user. And man were those hard days. So yeah, I know what you're going through. You'll learn. There is no other way.

 

Did you try with a clean config? No DSDT edits in config, as I suggested, and also, clean the stuff you really don't need in boot? I believe it would be really good to start with a clean config. So that you have as little points of failure as possible. Otherwise, it's gonna be a game of mixing and matching to debug. Don't go that road. It's exhausting.

 

Without the Nvidia driver, you don't actually get the second stage boot. This is also why you don't have acceleration. The video card is not supported by Apple so...no default driver. I'm not sure there is a way to make that one work, as well (maybe with some Fake IDs or something similar, never tried it). But I don't think it makes any difference here.

 

Also, I'm trying Nvidia driver now. Just to see if it makes any difference whatsoever. In my previous tests, it didn't. But there is only one way to know for sure, right?

 

Update: WebDriver-346.03.06f01, same exact xml edits as with the default driver, no issues, all logos and loading bars in place.

Share this post


Link to post
Share on other sites
Advertisement

 

And man were those hard days.

 

Yeeees, I remember too! :D

6 months for me to enable iGPU in my laptop, trying a kext in 128 one by one. Try a kext, repair permission and rebuild cache, reboot, (not working), delete, repair permission and rebuild cache again, Try another kext, etc. etc! :blowup:

Share this post


Link to post
Share on other sites

Hard work - you say.

2005

OS-X Tiger is when I started once I got my hands on intel 915 GAV. Did not realise almost 11 years have passed. But started working seriously on the platform after P35 chipset boards became available. EFI boot was considered the holy grail & now we also have OZMOSIS!

I very fondly remember the extensive help MasterChief lent to members especially on Native PM on P55 boards. There have been others whose help deserves equal appreciation.

Friends allow me the privilege to ask you all to join me in expressing our deepest sincerest gratitude to Insanelymac which has been a Temple of Wisdom and has always offered joyous rewards in the form of solved problems that brought happiness to our computing lives. I consider it  a rare opportunity to be a member here & I am extremely grateful to have all of you as friends.

Hope to keep up the good work.

Cheers!

  :thumbsup_anim:

Share this post


Link to post
Share on other sites

Guys, why so quiet?

I got news to share. First, when all else fails throw money at it! But seriously - Check out my sig - on with a new build. Burned a BIG hole in my pocket but the P55 needed to retire. The board was SATA2 USB 2 among other painful shortcomings. Now I intend to lead with a GT740 (Kepler) on the Z97 and onboard HD530 on the Z170. Just testing the waters with special note on the Boot-loader logo animation.

Do you think I should go with a new thread on the GA-Z170M-D3H build? Keep it here would be "dirtying" the thread USB Power Management problems & all but I really like the present company ;-)

Cheers!

Share this post


Link to post
Share on other sites

Guys, why so quiet?

I got news to share. First, when all else fails throw money at it! But seriously - Check out my sig - on with a new build. Burned a BIG hole in my pocket but the P55 needed to retire. The board was SATA2 USB 2 among other painful shortcomings. Now I intend to lead with a GT740 (Kepler) on the Z97 and onboard HD530 on the Z170. Just testing the waters with special note on the Boot-loader logo animation.

Do you think I should go with a new thread on the GA-Z170M-D3H build? Keep it here would be "dirtying" the thread USB Power Management problems & all but I really like the present company ;-)

Cheers!

 

We need to be on topic. Otherwise the mods will start moving posts.

 

I don't mind talking compatibility here, as long as it's about the issue the thread is targeted at (meaning no iGPU discussions). Fixing the iGPU seems to me even more complicated than the dedicated one, and it's also more complicated if you're not connected via DP. Unless that HD530 is fully compatible somehow. I didn't check its compatibility yet.

 

So, as long as we're talking about the dedicated GPUs, I'm fine with it.

 

Also, when everything else fails, if you throw money at it, you might throw money out the window if you don't know what to buy. :) Generally speaking.

 

Tips for the iGPU:

1. connect via DP

2. compatible iGPU

 

For the first one, I think things can be be adjusted with some framebuffer edits (tricking OS X into thinking you're connected via DP, when in fact, you're not).

For the second one, Device ID injection might be the fix.

Share this post


Link to post
Share on other sites

Hi there. Nice to know you're around, arsradu.

The GTX950 I have is still a no go as far as second-stage logo is concerned. Performance otherwise is good. But considering the galactic battle I had with the GTX950 the HD530 on the Z170 was a walk in the park. It worked OOB QE CI and all. The icing on the cake is that the second stage boot loader logo animation works the way it should. So that my friend is money definitely not out of the window. Besides this is just 2-3 days not even baby-steps. and it is still quite ahead compared to the other 2 Nvidia cards I have. Gives me an opportunity to see off the 950 and help set off some of the burden of the new system.

Meantime I would invite you all my good friends to join me to see and share here

http://www.insanelymac.com/forum/topic/311934-gigabyte-z170m-d3h-6700k-build-pm/?p=2234093

 

Cheers!

Share this post


Link to post
Share on other sites

Hi there. Nice to know you're around, arsradu.

The GTX950 I have is still a no go as far as second-stage logo is concerned. Performance otherwise is good. But considering the galactic battle I had with the GTX950 the HD530 on the Z170 was a walk in the park. It worked OOB QE CI and all. The icing on the cake is that the second stage boot loader logo animation works the way it should. So that my friend is money definitely not out of the window. Besides this is just 2-3 days not even baby-steps. and it is still quite ahead compared to the other 2 Nvidia cards I have. Gives me an opportunity to see off the 950 and help set off some of the burden of the new system.

Meantime I would invite you all my good friends to join me to see and share here

http://www.insanelymac.com/forum/topic/311934-gigabyte-z170m-d3h-6700k-build-pm/?p=2234093

 

Cheers!

 

Waw. That's great! Actually I'm thinking of buying a laptop sometime later this year, as well. Or maybe a MacBook...even though those are really, really expensive. So I might open up a thread for that too (in case I go with the regular laptop).

 

In the meantime, I would like to take a look at yours.

 

And if you have questions related the dedicated GPU, don't hesitate to ask them here.

 

Good job man.

Share this post


Link to post
Share on other sites

Hey ardradu!

 

Question on one dedicated GPU coming up - we aim to please ;-)

 

Does the AppleGaphicsDevicePolicy.kext absolutely need to be edited in order to avoid the black screen with NVDIA cards when on the iMac 17,1 SMBIOS ?

I tried what piker suggested, replacing the board-id with board-ix from the clover plist but my GT740 reaches a black desktop and I can see the mouse cursor and it even enlarges when wiggled (please stop smirking) yeah I know... but I can shut down & restart the system using kb shortcuts.

Ever tangled with anything similar? It occurred to me that since GT740 uses drivers that are in ElCapitan already it might have a smooth first to second transition and work OOB. But I am struggling to get a display. Clover will not let me boot with another smbios except 17,1.

 

Cheerio!

Share this post


Link to post
Share on other sites

Hey ardradu!

 

Question on one dedicated GPU coming up - we aim to please ;-)

 

Does the AppleGaphicsDevicePolicy.kext absolutely need to be edited in order to avoid the black screen with NVDIA cards when on the iMac 17,1 SMBIOS ?

I tried what piker suggested, replacing the board-id with board-ix from the clover plist but my GT740 reaches a black desktop and I can see the mouse cursor and it even enlarges when wiggled (please stop smirking) yeah I know... but I can shut down & restart the system using kb shortcuts.

Ever tangled with anything similar? It occurred to me that since GT740 uses drivers that are in ElCapitan already it might have a smooth first to second transition and work OOB. But I am struggling to get a display. Clover will not let me boot with another smbios except 17,1.

 

Cheerio!

 

I have no idea... Sorry. Never wiggled it that way before. :)

Share this post


Link to post
Share on other sites
Does the AppleGaphicsDevicePolicy.kext absolutely need to be edited in order to avoid the black screen with NVDIA cards when on the iMac 17,1 SMBIOS ?

 

At least with MacPro 6,1 SMBIOS there is actually another way, by renaming the GPU device to "GFX1", for example like this:

Device (_SB.PCI0.NPE3.GFX1) {
   ...
}

But no idea if - and how - this works with your definition. And btw, at least for some there is a way to enable the 2nd stage logo within the same code block by adding something like:

"@2,AAPL,boot-display", 
Buffer (Zero) {}, 

(Replace "@2" with your actual port your monitor is connected) But YMMV!

Share this post


Link to post
Share on other sites

It didnt work for me. GeForce 770 2GB (Msi). I get 800x600 Clover and no visible second stage loader.
Without any modifications, Clover is in native resolution (1920x1200), but no second stage boot loader.

Share this post


Link to post
Share on other sites

It didnt work for me. GeForce 770 2GB (Msi). I get 800x600 Clover and no visible second stage loader.

Without any modifications, Clover is in native resolution (1920x1200), but no second stage boot loader.

Could you share your config + ioreg + device-properties.hex files?

 

Also, please, add the device-properties.xml you modified.

 

Also, do you see the loading bar for the second stage boot anywhere on the screen? Or is it a blank screen? Cause...this thread is aiming to fix a particular issue (missing loading bar not included). Whether or not could fix others, as well, that remains to be seen. But, as I said in my first post, don't use this thread as a solution to all the missing boot logos. It might or might not work.

Share this post


Link to post
Share on other sites

Sry for not adding any files for debug, here you go.

 

My problem is that second stage loading bar is in bottom left corner (seen for short time, SSD). Apple logo in first stage boot is normal (native resolution, loader bar goes to half way), then monitor "blinks" and loader bar goes to bottom left corner.

in config.plist I already delete moficifations

Archive.zip

Share this post


Link to post
Share on other sites

Sry for not adding any files for debug, here you go.

 

My problem is that second stage loading bar is in bottom left corner (seen for short time, SSD). Apple logo in first stage boot is normal (native resolution, loader bar goes to half way), then monitor "blinks" and loader bar goes to bottom left corner.

 

in config.plist I already delete moficifations

Ok, it looks like the issue is the one we're attempting to fix here.

 

Alright, I'll take a look at what you sent me and come back with news shortly (most likely tonight).

 

Update: your ioreg is corrupted. Did you use the IOregistryExplorer I attached on the first post?

 

Could you please, resend? Or take a screenshot of it after you search for "display"? Can't really do much without it.

Share this post


Link to post
Share on other sites

Does 10.11.5 update for El Capitan containing new drivers nvidia fix load bar position?

 

 

Inviato dal mio iPad utilizzando Tapatalk

Share this post


Link to post
Share on other sites

Could u explain?

 

Clover Rev 3399

 

BootDisplay: To fix ugly 2nd stage boot or even black screen before login screen, we add new "BootDisplay" (a shorthand for "@x,AAPL,boot-display") property into config (value range: 0 - [totalports-1]). For years people did this job via D/SSDT / EFI Strings injections (Apple style), but no more. Before, Clover only set this properties to port 0 by default, which may lead problem if your currently active port (connected to display) other than port 0.

 

VideoPorts: We have now full (NVIDIA, ATI to follow) functionality to parse & set its properties dynamically from amount of display ports by user defined.

 

Able to inject Intel/Integrated-GPU even its not set to primary in BIOS by using blank FB (find more here).

 

 

 

I believe he means this:

<key>Graphics</key>
<dict>
<key>BootDisplay</key>
<integer>1</integer>

So, under Graphics, in your config, you add:

<key>BootDisplay</key>
<integer>1</integer>

Where 1 is the number of ports on your graphics card -1 (minus 1), probably because they start with port 0.

 

So, if I got this right, in this example, we have a video card with 2 ports. 

 

And we don't need to specify the port on which the user is connected, but rather the number of ports available on the video card, minus one. Please, correct me if I'm wrong.

 

Last time I tried this method, it didn't work for me. BUT there is a big chance I wasn't doing something right.

 

So, if someone wants to try it and come back with some feedback, I would love to know and add it on the main page.

Share this post


Link to post
Share on other sites

Let's say your GPU has 4 ports: two dvi's, HDMI and DP.

Their numbers are 0-3.

Check what port your display is connected to with ioreg, set it as bootdisplay in clover and enable inject nvidia.

Same result as OP with less effort.

Share this post


Link to post
Share on other sites

Let's say your GPU has 4 ports: two dvi's, HDMI and DP.

Their numbers are 0-3.

Check what port your display is connected to with ioreg, set it as bootdisplay in clover and enable inject nvidia.

Same result as OP with less effort.

 

You Say that with Last cloverconfig i resoleve the problem of the bar?

Share this post


Link to post
Share on other sites

I used ioreg I already had on my pc (didnt know there is any difference).

 

Now I did use one you attached and attached a screenshoot.

 

Hi,

 

The new ioreg worked properly.

 

Also, I checked the files you sent. It looks ok. The editing looks on point. However, you forgot to add the resulting hex code to Clover config and check "Inject". Attached now the config.plist file including the hex code.

 

For the resolution issue, did you try to set Clover GUI to use the resolution of your monitor? By the way, which resolution do you have on your monitor? Also, are you using any custom DSDT.aml in Clover/ACPI/patched?

config.plist.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Arman Hossain
      HI 
      I want install High Sierra  on my pc . my CPU is : AMD Ryzen 3 2200g and my MotherBoard is : ASUS EX A320m. and 8gb ram DDR4 ram . i dont have any external gripch card. i have seen some video on youtube how to install High Sierra but they use extranal gripch card to make it good  but i don't have any extranal gripch card . on my windows sysem the shared gpu is 2GB which is using my ram to crate the vega gripch  . i want know is it possible to install High Sierra on my pc with out any extarnal gripsh card  ?


    • By Andres ZeroCross
      First my Old Threads is here http://www.insanelymac.com/forum/topic/308178-el-capitan-wih-i7-6700-skylake-gigabyte-ga-z170-hd3-palit-jetstream-gtx960/

      My Computer Specifications
      1. Processor : Intel Core i7 6700
      2. Motherboard : Gigabyte Z170-HD3
      3. VGA Card : Palit Jetstream GTX960 4GB DDR5
      4. Wifi Card ; TP-Link TL-WDN4800
      5. PCI-E to Sata = Bafo PCI-e to 2 Sata3 and 2 e-Sata
      6. PCI to USB 2.0 - NEC Chipset
      7. Main Harddisk Harddisk : Fujitsu SSD 120GB + Seagate 500GB that plug into Bafo PCIe to Sata3
      8. Other Harddisk : Natno SSD 12GB, 2x Seagate 2TB, Seagate 500GB, all of it are plug into onboard Sata Chipset Controller (But Unknow at El Capitan / 10th Intel Chipset)
      9. RAM : Team 3000Mhz 8GB (2x4GB)
      10. Display : Asus VN248H
      11. Clover version : 3280

      My Step :
      1. Because Internal Sata Chipset and USB 3.0 are not supported yet, so i clone my Fujitsu 120GB SSD from my Hacbook Asus X455LA that already installed El Capitan Build 15B30a with Carbon Copy Cloner
      2. I use MacPro 6.1 as SMBIOS and use FakeCPUIID of Intel 4790k (0x0306C3)
      3. Remove CPUSensor.kext from "FakeSMC.kext/Contents/Plugins" if you don't do this it will be stuck at ACPI log verbose.
      4. I try boot from USB that already install Clover 3280 and it boot. I use "-v nv_disable=1 dart=0"
      5. Then at desktop, i install nvidia web driver 346.03.02F02 (before that you need to modif it,, use pkgutil --expand bla bla ba,, google it and change required os to "15B" then use pkgutl --flatten bla bla to repackage) then i change info plist from AppleGraphicsControl.kext/Contents/Plugin/AppleGraphicsDevicePolicy.kext/Contents/info.plist and change line that contain board-id of MacPro 6.1 from Config2 to none
      6. Then i install that kext,, and restart
      7. i use "-v dart=0 nvda_drv=1 and it will need more time than usual to get login form,, yeah i did it. But there is some bugs
       
      Bugs :
      1. Internal sata is not function
      2. USB 3.0 is error too,,  at verbose i see "error mantisa log"
      3. Sometimes my system get freeze for a few seconds. I thinks this is error from Nvidia web driver,, i see nvdia error log from "sudo dmesg"

      At last,, sorry for my bad english
      Thanks
       
      This is for screenshots
       

       

      I upload my IOREG and DSDT
       
       
    • By fantomas
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f19 --> build 16G2136 (thanks to BreBo) New!
      Nvidia Web Driver - 378.05.05.25f18 --> build 16G2028 (thanks to Riley Freeman)
      Nvidia Web Driver - 378.05.05.25f16 --> build 16G2016 (thanks to Cyberdevs)
      Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By verdazil
      Notebook: Acer A315-53-34MP, High Sierra 10.13.6 && Mojave 10.14.6 installation
       
      Hardware
      CPU: Intel® Core™ i3-8130U, 3400 MHz
      Memory: Kingston, DDR4, 2x4Gb, 2400 MHz
      Video: Intel UHD620 (integrated)
      Display: CMN N156HGA-EAB [15.6" LCD] (embedded)
      External monitor: LG TV 42LF650V
      SSD: Leven JAJS300M240C, 240 Gb (replacement)
      Chipset: Intel Sunrise Point-LP
      Sound: Intel Kaby Lake HDMI + Realtek ALC255
      LAN: Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
      Wi-Fi + Bluetooth: Broadcom BCM94352Z (replacement)
      Touchpad: ELAN0504 
      Cardreader: Realtek PCIE RTS5289
      VGA WebCam
      Mac model: MacBookPro14,2
      MacOS versions tested: High Sierra 10.13.6 (17G8030) && Mojave 10.14.6 (18G95) && Catalina 10.15 (19A558d)
       
      Here is what I used to install and configure the system:
      - Video settings: https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-using-whatevergreen/
      - Wi-Fi settings: https://github.com/acidanthera/AirportBrcmFixup
      - Bluetooth settings: https://github.com/RehabMan/OS-X-BrcmPatchRAM/blob/master/README.md
      - Touchpad settings: https://voodooi2c.github.io
      - Cardreader settings: https://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/
      - Clover, version v2.5k r5033: https://github.com/Dids/clover-builder/releases/tag/v2.5k_r5033
      - The results of the work of many developers in this and other forums.
       
      What works?
      - Video: Full HD x 60Hz accelerated video on embedded and external (HDMI) monitors
      - Sound: embedded and external (audio jack + HDMI audio)
      - Microphone
      - Touchpad (gestures)
      - Cardreader
      - Wi-Fi
      - USB2 && USB3 ports
      - LAN
      - Bluetooth
      - VGA WebCam
      - Sleep mode
      - Display brightness and volume control using function keys
      - Battery Indication
      - Automatically dimming the screen when the laptop is running on battery power
      - Sound notification when external power is connected
       
      What does not work?
      -
       
      How to use
      1. Update BIOS to version 2.02. Secure boot must be disabled, Touchpad settings - Advanced
      2. To make a bootable flash drive, you can use my EFI directory (link at the end of the message) Tested for High Sierra 10.13.6 (17G8030) && Mojave 10.14.6 (18G95) && Catalina 10.15 (19A558d) installation.
      Note: you must insert your own SeralNumber && MLB && ROM in the config.plist file.
      3. After installation, just copy EFI directory from flash drive to the system drive.
      4. Install kexts BrcmFirmwareRepo.kext && BrcmPatchRAM2.kext to the /Library/Extensions and update system caches.
       
      Link: https://drive.google.com/open?id=11vTmPKjQUSEs2ddUzgwXG9A59EcDMrCs
    • By shinho73
      Can someone help me fix reboot issue? Actually it reboots, but sometimes the hackintosh just hangs with screen off. Here is the Extra folder containing org.chameleon.boot.plist. https://drive.google.com/drive/folders/1MX8-DpQk9kaRUfjPcToxf-ElWh-bN6EY?usp=sharing  and the spec of the PC. https://drive.google.com/drive/folders/1NlcUNK5DBzJFxeFeuyt92eRjQqwO5T32?usp=sharing Can someone look at it? I might be doing something wrong. Any help will be greatly appreciated. Thank you. 

×