Jump to content
Sign in to follow this  
Followers 0
macinsane

Strange behaviour: USB-Disks only work AFTER sleep (El Capitan GM)

1 post in this topic

Recommended Posts

Do I have a USB problem or not? All USB ports only work really with me AFTER sending El Capitan to sleep and wake it up again(dummy kexts, GenericUSB makes no difference, with FakePCIID_XHCIMux.kext all USB ports are dead). In Disk Utility some disks are somehow detected (grayed out, spinning wheel, not mountable). After Wake however all disks work properly. No problems at all with other devices like keyboard, mouse, Bluetooth or USB audio. Has anyone an idea what's going on? Many thanks!

 

Edit: Ok, USB 2.0 Ports are working (System profiler shows them as usb 3.0). All USB 3.0 Ports dead.

 

Edit2: Compiled DSDT (it's a mess but at least no errors anymore, only a few hundred remarks and warnings...). The result: 4 of the 6 USB 3 Ports are now recognized (used Dummykexts with port restrictions removed). Has that something to do with iMac 14,2 SMBIOS (need it for my nVidia to work, Macpro defintion leads to black screen)? Sleep doesn't work anymore, seems USB wakes the Captain instantly. Any suggestions? 

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Clover r4542 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 14 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4542 for VMware.zip". Mount Clover-v2.4k-4542-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By MikixIT
      Salve a tutti ho installato OSX, Sierra 10.12.6 (16G29), grazie a questo forum
      Ho installato tutti i Kext necessari da Nvidia a quelli per l'audio HDMI,ethernet ecc..
      L'unico problema che  Mouse e tastiera USB collegati ad un hub FUNZIONANO, mentre senza hub usb non funzionano nelle altre porte, NELLE ALTRE PORTE PERO' FUNZIONANO PEN DRIVE USB,ho provato vari kext in rete mentre il Forum era in manutenzione
      Ma non riesco a farli funzionare su altre porte,vi allego La mia EFI( http://www.mediafire.com/file/mimomvp1on4ys58/EFI-MikixIT 12%3A03%3A2018.zip) E vari screen del mio OSX con info varie




    • By ITzTravelInTime
      Questo è il thread in italiano dedicato alla mia app TINU, l'app open source che ho creato per creare chiavetta di installazione di mac utilizzando il metodo "createinstallmedia".
      Il nome è l'acronimo di TINU Is Not U (Per le regole del forum devo censurare, ma la U si riferisce ad un programma che piu o meno svolge lo stesso scopo che per buoni motivi è bandita su questo sito, il punto del metterlo nel nome sta nel sottolineare che la mia app è totalmente diversa)
      L'app è pensata per essere molto semplice ed immediata da usare (con un interfaccia grafica progettata con criteri e metodi usati in ambito professionale per lo sviluppo di applicazioni utente) e per essere molto solida e stabile che funziona sempre al primo colpo (a differenza di altri tool che conosciamo ...)
       
      A livello funzionale quest'app non è altro che un interfaccia grafica per il metodo da terminale "createinstallmedia" che viene sfrutatto dalla stessa per creare la chiavetta, quindi le chiavette create con TINU sono chiavette al 100% vanilla come se le aveste create dal terminale, l' applicazione, rispatto al metodo da terminale, aggiunge però funzioni utili come il controllo ed il riconoscimento di errori nel processo, la formattazione automatica della chiavetta USB che si sceglie di usare in formato Mac OS Extended (journaled) (detto anche HFS+) con mapatura di partizione GUID, ed anche altre opzioni personalizzabili o disattivabili come l'applicare un icona alla chiavetta di instalalzione.
      Tra gli altri vantaggi troviamo il fatto che permette di creare chiavette utilizzando qualunque applicazione di mac che contiene l'eseguibile "createinstallmedia" inclusi installer delle beta ed installer appena rilasciati, e non richiede di fare cose particolari prima come formattare la chiavetta e cambiare lingua al sistema e puo utilizzare applicazioni di mac che si trovano in varie directory nel sistema e non solo quelle che stanno nella cartella delle applicazioni ed hanno un nome specifico (nota che l'applicazione di installazione di mac deve essere quella interacche pesa diversi gb e non quella da pochi mb che l'app store puo scaricare alcune volte e che non contiene tutto quello che serve per permettere a createinstallmedia di funzionare)
       
      Tra l;e altre cose quest'app è l'unica app di questo genere sviluppata e che continua ad essere sviluppata in Italia ed è anche l'unica completamente open source.
       
      Trovate qui alcuni link utili:
       - Scarica l'app:                                                  https://github.com/ITzTravelInTime/TINU/releases
       - Codice sorgente dell'app:                                 https://github.com/ITzTravelInTime/TINU
       
       - FAQs (Domande fatte di frequente, in inglese):   https://github.com/ITzTravelInTime/TINU/wiki/FAQs
       
       - Thread in inglese su tinu (English thread about TINU): http://www.insanelymac.com/forum/topic/326959-tinu-the-macos-install-media-creation-tool-mac-app/
       
      Qui invece ci sono un paio di guide (Anche se l'app è molto facile da usare):
       - Piccola guida su come usare TINU per un hackintosh:                                   https://www.youtube.com/watch?v=Ug1yBZybpD4
       - Piccola guida su come usare TINU per creare cheiavette per Mac "originali":    https://www.youtube.com/watch?v=fZOZOUt2ErM
       
       
      Pianifico molte altre nuove funzioni per future versioni dell'app (vedi il thread in inglese per saperne di più)
       
       
      Il supporto a clover in TINU è pianificato per una versione futura, anche se dei protipi a livvello codice per renderlo possibile, sono gia stati sperimentati con successo.
       
      Spero che anche voi del forum italiano aprezzerete questa app come gli utenti del forum inglese, per idee e suggerimenti, siete liberi di esprimervi :-)
       

    • By ITzTravelInTime
      Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
       
      The name means: TINU Is Not #####, the U refers to a popular software that is used to create Mac OS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
       
      This app basically is a graphical interface for the createinstallmedia executable that is inside the Mac OS installer apps, it is capable to create a Mac OS installer on a drive completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides also to you some customization features and a better management of the hall macOS isntall media creation process
       
      Allows you to create easily a macOS install media without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is you want to use it on a Mac.
       
      Features:
        - Simple to use UI that allows you to easily start the macOS install media creation process
        - It can work with every Mac OS installer app that has the createinstallmedia executable inside of it's resources folder (including also beta and newly released installers)
        - You can use any drive or partition you want that can be erased and is at least 7 GB of size
        - Works on Mac OS recovery, so you can create a macOS install media from a bootable macOS installer or from the macOs recovery, and you can use TINU to install macOS too.
        - All vanilla, the macOS install medias created with this tool are 100% vanilla, just like you created them using the command line "createinstallmedia" method in the terminal, with also some extra optiona features
        - Open source, you will know what this program does on your computer and also you can create your own version by downloading and playing with the source code
        - Does not requires to do anything of special first, just open the program
        - No need to go in disk utility first, TINU can format your drive for you
        - Uses recent and more modern APIs and SDKs and Swift 3 language
        - Transparent graphics style available (use alt + s on the keyboard or View->Use transparent style)
        - Works using the latest versions of macOS and will also support newer Mac installers out of the box without needing for an update
        - Advanced section, to customize your macOS install media
        - Installer customization: Kernelcache/prelinkedknerel and boot files replacement (a feature that can be handy while dealing with old Macs or with beta installers when you need to mod or change the boot files some times)
        - Clover EFI folder installer
       
        Features that are planned for some future versions:
        - Integrated EFI partition mounter tool (TINU can already mount EFI partitions from version 2.0, but a dedicated section which allows to mount every EFI partition in the system will be added)
        - Install clover and configure clover
        - Install kexts inside the kexts folder of clover
        - Clover drivers customization
        - Use custom dsdt in clover
        - integrated pre-made clover config templates database from a remote and open repository
        - Support for other languages, at least Italian   Rquirements:  - A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer)  - A drive or a free partition of at least 7 GB that you want to turn into a macOS/Mac OS X installer  - A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage device in your machine (excepted the drive or volume you want to turn into your macOS install media)   Note that this app is under the GNU GPL v3 license so any reuse of the source code must follow the license's terms   Latest stable TINU release:   Download the app:                                https://github.com/ITzTravelInTime/TINU/releases   View the source code:                            https://github.com/ITzTravelInTime/TINU       Frequently asked questions about TINU:  https://github.com/ITzTravelInTime/TINU/wiki/FAQs     NOTE: if you have problems with your USB installer of 10.13.4 or newer version not being detected by clover you have to use the latest clover and if it still does not detectets your usb installer you have to remove the invivible file called .IAPhysicalMedia located into the root of the usb installer. This issue is caused by a changement in the apple's createinstallmedia, don't blame TINU for that, TINU does only uses the installer creation method from apple, which has been changed by appleitself, causing this problem for hackintosh users some times, this issue should be resolved in the latest versions of clover which will no longer require that you do changements to let your usb dive to be detected, a setting to do this fix automatically in tinu is also present TINU in the adavnced settings, starting from the version 2.0 of the app. I leave also some screenshots as well
       
       
       
       
       
       
       
       

    • By fantomas1
      hi people  
       
      you can use this thread to link / talk about of the future Nvidia Web Driver updates for El Capitan
       
      10.11.6
      Nvidia Web Driver - 346.03.15f15 --> build 15G21013 (thanks to BreBo)  New!
      Nvidia Web Driver - 346.03.15f14 --> build 15G20015 (thanks to DMCrimson)
      Nvidia Web Driver - 346.03.15f13 --> build 15G20015 (thanks to Louvier)
      Nvidia Web Driver - 346.03.15f12 --> build 15G19009 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f11 --> build 15G18013 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f10 --> build 15G17023 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f09 --> build 15G1611 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f08 --> build 15G1510 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f07 --> build 15G1421 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f06 --> build 15G1217 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f05 --> build 15G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f04 --> build 15G1108 (see this post)
      Nvidia Web Driver - 346.03.15f03 --> build 15G1004 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f02 --> build 15G31 (thanks to Moviemakergr)
      Nvidia Web Driver - 346.03.15f01 --> build 15G31 (thanks to WeBeRiO)
      [uPDATE_3]Nvidia Web Driver - 346.03.15b01 --> build 15G24b (thanks to DMCrimson)
       
      10.11.5
      Nvidia Web Driver - 346.03.10f02 --> build 15F34 (thanks to marcozardi)
      Nvidia Web Driver - 346.03.10f01 --> build 15F34 (thanks to WeBeRiO)
      [uPDATE_2] Nvidia Web Driver - 346.03.10b01 --> build 15F31a (see this post)
       
      10.11.4
      Nvidia Web Driver - 346.03.06f01 --> build 15E65 (see this post)
      Nvidia Web Driver - 346.03.06b01 --> build 15E (see this post)
       
      10.11.3
      Nvidia Web Driver - 346.03.05f02 --> second release for build 15D21 (thanks to Fljagd)
      Nvidia Web Driver - 346.03.05f01  --> build 15D21 (see this post)
      Nvidia Web Driver - 346.03.05b02 --> build 15D (see this post)
       
      10.11.2
      Nvidia Web Driver - 346.03.04f02 --> second public release (see this post)
      Nvidia Web Driver - 346.03.04f01 --> build 15C50 (see this post)  
      Nvidia Web Driver - 346.03.04b02 --> build 15C48a (see this post) 
      Nvidia Web Driver - 346.03.04b01 --> build 15C47a (see this post)
       
      10.11.1
      Nvidia Web Driver - 346.03.03f02 --> second public release (see this post) 
      Nvidia Web Driver - 346.03.03f01 --> build 15B42 (thanks to jperkins909)
       
      10.11.0
      Nvidia Web Driver - 346.03.02f02 --> build 15A284 (thanks to MTWomg)
      Nvidia Web Driver - 346.03.02f01 --> build 15A284 (see this post)
       
      DP
      Nvidia Web Driver - 346.03.01b07 --> GM/DB/PB6/DB7/PB5 (thanks to BreBo) 
      Nvidia Web Driver - 346.03.01b06 --> build 15A (thanks to MTWomg) 
×