Jump to content
fusion71au

How to create a macOS Installer which doesn't need bootloader kext injection (FakeSMC in pre-linked kernel), bypass High Sierra firmware and MBR check

39 posts in this topic

Recommended Posts

Advertisement

Hi,

 

The link works but this file won't work. After installing and rebooting you will get a notification that "Some updates were not installed".

I downloaded the full 10.13.1 app and recreate the USB installer using "macOS High Sierra Patcher" app from http://dosdude1.com/highsierra/.

Share this post


Link to post
Share on other sites
On 9/13/2015 at 12:04 AM, fusion71au said:
Updates for Sierra and High Sierra
 
Custom Prelinkedkernel Generator Tool
I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:
 
1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.  
2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled.
3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem 
4.  Open terminal and run the following commands...

cd ~/Downloads/BaseSystem
chmod +x PLK.tool
./PLK.tool
---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.

Hi, i followed guide above, but for Mojave. And i cant get wifi work in installer mojave. This is my terminal: is it wrong?

Quote

Trans-MacBook-Pro:BaseSystem tranchuc$ cd ~/Downloads/BaseSystem
Trans-MacBook-Pro:BaseSystem tranchuc$ chmod +x PLK.tool
Trans-MacBook-Pro:BaseSystem tranchuc$ ./PLK.tool
created: /Users/tranchuc/Desktop/BS.sparseimage
/dev/disk7              Apple_partition_scheme             
/dev/disk7s1            Apple_partition_map                
/dev/disk7s2            Apple_HFS                          /Volumes/install_build
    Validating target...done
    Validating source...done
    Retrieving scan information...done
    Validating sizes...done
    Restoring  ....10....20....30....40....50....60....70....80....90....100
    Restored target device is /dev/disk7s2.
    Remounting target volume...done
File system user/group ownership enabled
Warning: /Volumes/OS X Base System/AppleInternal/Library/Extensions: No such file or directory
Kext with invalid signatured (-67054) allowed: <OSKext 0x7f9d42bfa510 [0x7fff9b35e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7f9d42c4fbc0 [0x7fff9b35e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7f9d407bce20 [0x7fff9b35e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7f9d406cdaa0 [0x7fff9b35e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
AirPortAtheros40.kext - dependency 'com.apple.iokit.IO80211Family' not found.
AirPortAtheros40.kext is missing dependencies (including anyway; dependencies may be available from elsewhere)
Invalid signature -67054 for kext <OSKext 0x7f9d42bfa510 [0x7fff9b35e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Invalid signature -67054 for kext <OSKext 0x7f9d42c4fbc0 [0x7fff9b35e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Invalid signature -67054 for kext <OSKext 0x7f9d407bce20 [0x7fff9b35e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Invalid signature -67054 for kext <OSKext 0x7f9d406cdaa0 [0x7fff9b35e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
KernelCache ID: D949EE39AC47E8A683D9EA90DD54083A
symlink("../../../PrelinkedKernels/prelinkedkernel", "/Volumes/OS X Base System/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 2 (No such file or directory)
"disk8" ejected.

 

Share this post


Link to post
Share on other sites
6 hours ago, oldman20 said:

Hi, i followed guide above, but for Mojave. And i cant get wifi work in installer mojave. This is my terminal: is it wrong?

 

 

Unfortunately to generate a working prelinked kernel for Mojave, the PLK tool needs to be run in Mojave (with Mojave's kextcache binary), otherwise you see the errors about the missing dependencies.

 

Try the prelinked Mojave kernel that I have already posted here Mojave and AirPortAtheros40.kext.

Share this post


Link to post
Share on other sites
On 10/17/2018 at 5:34 AM, fusion71au said:

 

Unfortunately to generate a working prelinked kernel for Mojave, the PLK tool needs to be run in Mojave (with Mojave's kextcache binary), otherwise you see the errors about the missing dependencies.

 

Try the prelinked Mojave kernel that I have already posted here Mojave and AirPortAtheros40.kext.

no, i ran above code inside Mojave and got error. Also tried your kernel attached, no lucky

Share this post


Link to post
Share on other sites
On 9/13/2015 at 2:04 PM, fusion71au said:
Custom Prelinkedkernel Generator Tool
I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:
 
1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.  
2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled.
3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem 
4.  Open terminal and run the following commands... 

cd ~/Downloads/BaseSystem
chmod +x PLK.tool
./PLK.tool
---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.

Hi, i followed your guide and this my process:

I'm running Mojave, with SIP is disabled. Then i download BaseSystem_PLK tool Mojave, copy IO80211Family.kext and AirPortAtheros40.kext to ExtraKext, BaseSystem.dmg to BaseSystem folder. This is result:

Trans-MacBook-Pro:~ tranchuc$ cd ~/Downloads/BaseSystem
Trans-MacBook-Pro:BaseSystem tranchuc$ chmod +x PLK.tool
Trans-MacBook-Pro:BaseSystem tranchuc$ ./PLK.tool
created: /Users/tranchuc/Desktop/BS.sparseimage
/dev/disk5          	Apple_partition_scheme         	
/dev/disk5s1        	Apple_partition_map            	
/dev/disk5s2        	Apple_HFS                      	/Volumes/install_build
	Validating target...done
	Validating source...done
	Retrieving scan information...done
	Validating sizes...done
	Restoring  ....10....20....30....40....50....60....70....80....90....100
	Restored target device is /dev/disk5s2.
	Remounting target volume...done
Password:
File system user/group ownership enabled
Warning: /Volumes/OS X Base System/AppleInternal/Library/Extensions: No such file or directory
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba25abb80 [0x7fff9490e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba25a59f0 [0x7fff9490e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba24d0e00 [0x7fff9490e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba24cd710 [0x7fff9490e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
Invalid signature -67054 for kext <OSKext 0x7ffba25abb80 [0x7fff9490e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Invalid signature -67054 for kext <OSKext 0x7ffba25a59f0 [0x7fff9490e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Invalid signature -67054 for kext <OSKext 0x7ffba24d0e00 [0x7fff9490e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Invalid signature -67054 for kext <OSKext 0x7ffba24cd710 [0x7fff9490e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
KernelCache ID: 09761E31047DDAAFC98261CCBE288CB4
symlink("../../../PrelinkedKernels/prelinkedkernel", "/Volumes/OS X Base System/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 2 (No such file or directory)
"disk5" ejected.
Trans-MacBook-Pro:BaseSystem tranchuc$ 

 

Share this post


Link to post
Share on other sites
4 hours ago, oldman20 said:

Hi, i followed your guide and this my process:

I'm running Mojave, with SIP is disabled. Then i download BaseSystem_PLK tool Mojave, copy IO80211Family.kext and AirPortAtheros40.kext to ExtraKext, BaseSystem.dmg to BaseSystem folder. This is result:


Trans-MacBook-Pro:~ tranchuc$ cd ~/Downloads/BaseSystem
Trans-MacBook-Pro:BaseSystem tranchuc$ chmod +x PLK.tool
Trans-MacBook-Pro:BaseSystem tranchuc$ ./PLK.tool
created: /Users/tranchuc/Desktop/BS.sparseimage
/dev/disk5          	Apple_partition_scheme         	
/dev/disk5s1        	Apple_partition_map            	
/dev/disk5s2        	Apple_HFS                      	/Volumes/install_build
	Validating target...done
	Validating source...done
	Retrieving scan information...done
	Validating sizes...done
	Restoring  ....10....20....30....40....50....60....70....80....90....100
	Restored target device is /dev/disk5s2.
	Remounting target volume...done
Password:
File system user/group ownership enabled
Warning: /Volumes/OS X Base System/AppleInternal/Library/Extensions: No such file or directory
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba25abb80 [0x7fff9490e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba25a59f0 [0x7fff9490e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba24d0e00 [0x7fff9490e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7ffba24cd710 [0x7fff9490e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
Invalid signature -67054 for kext <OSKext 0x7ffba25abb80 [0x7fff9490e8e0]> { URL = "PromiseSTEX.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.promise.driver.stex" }
Invalid signature -67054 for kext <OSKext 0x7ffba25a59f0 [0x7fff9490e8e0]> { URL = "ATTOExpressSASRAID2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASRAID2" }
Invalid signature -67054 for kext <OSKext 0x7ffba24d0e00 [0x7fff9490e8e0]> { URL = "ATTOExpressSASHBA2.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOExpressSASHBA2" }
Invalid signature -67054 for kext <OSKext 0x7ffba24cd710 [0x7fff9490e8e0]> { URL = "ATTOCelerityFC8.kext/ -- file:///Volumes/OS%20X%20Base%20System/Library/Extensions/", ID = "com.ATTO.driver.ATTOCelerityFC8" }
KernelCache ID: 09761E31047DDAAFC98261CCBE288CB4
symlink("../../../PrelinkedKernels/prelinkedkernel", "/Volumes/OS X Base System/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 2 (No such file or directory)
"disk5" ejected.
Trans-MacBook-Pro:BaseSystem tranchuc$ 

 


that symblink error is fine .
your prelinkedkernel is generated succesfully . you can now proceed ..

Share this post


Link to post
Share on other sites

that symblink error is fine .
your prelinkedkernel is generated succesfully . you can now proceed ..
Thanks. I successful to enable wifi at the first time. But after step 1, next boot screen to setup else, I realized wifi still off, did you get the same? 3692a8eb5ca16aac8395a3ad50bc230e.jpg

Gửi từ SM-G955F của tôi bằng cách sử dụng Tapatalk

Share this post


Link to post
Share on other sites
7 hours ago, oldman20 said:

Hi, i followed your guide and this my process:

I'm running Mojave, with SIP is disabled. Then i download BaseSystem_PLK tool Mojave, copy IO80211Family.kext and AirPortAtheros40.kext to ExtraKext, BaseSystem.dmg to BaseSystem folder. This is result:

 

 

No need to copy both IO80211Family.kext and AirPortAtheros40.kext, just IO80211Family.kext  IO80211Family.kext from High Sierra already contains AirPortAtheros40.kext inside its /IO80211Family.kext/Contents/PlugIns folder.

 

2 hours ago, oldman20 said:

Thanks. I successful to enable wifi at the first time. But after step 1, next boot screen to setup else, I realized wifi still off, did you get the same?
 

 

Yes.  On first boot to the newly installed Mojave on your hard dive, AirPortAtheros40.kext will be absent in /System/Library/Extensions.  Copy the kext into /S/L/E and rebuild kext caches/prelinkedkernel eg

 

In terminal...

sudo cp -R AirPortAtheros40.kext /System/Library/Extensions
sudo chown -R 0:0 /System/Library/Extensions/AirPortAtheros40.kext && sudo chmod -R 755 /System/Library/Extensions/AirPortAtheros40.kext
sudo touch /System/Library/Extensions && sudo kextcache -u /

then reboot your system.  Your Atheros wifi should now work.

 

Confirm the kext has loaded by typing kextstat | grep Atheros.  I get the result

Mac-Pro:~ fusion71au$ kextstat | grep Atheros
   67    0 0xffffff7f81df4000 0x148000   0x148000   com.apple.driver.AirPort.Atheros40 (700.74.5) 9753F22E-5C85-3E95-B543-0870CF03838A <66 15 12 7 5 4 3 1>

 

 

Share this post


Link to post
Share on other sites
15 hours ago, fusion71au said:

No need to copy both IO80211Family.kext and AirPortAtheros40.kext, just IO80211Family.kext  IO80211Family.kext from High Sierra already contains AirPortAtheros40.kext inside its /IO80211Family.kext/Contents/PlugIns folder.

Hi, cause i using IO80211Family.kext from Mojave, not previous version

Share this post


Link to post
Share on other sites

hello, i got new problem in other case: i created Installer Mojave with createinstallmedia method, and S/L/Prelinkedkernel inside BaseSystem.dmg - which file not write, only read. So how to put modifed Prelinkedkernel replace for original file, sir?

Share this post


Link to post
Share on other sites
 
Yes.  On first boot to the newly installed Mojave on your hard dive, AirPortAtheros40.kext will be absent in /System/Library/Extensions.  Copy the kext into /S/L/E and rebuild kext caches/prelinkedkernel eg
 
In terminal...
sudo cp -R AirPortAtheros40.kext /System/Library/Extensionssudo chown -R 0:0 /System/Library/Extensions/AirPortAtheros40.kext && sudo chmod -R 755 /System/Library/Extensions/AirPortAtheros40.kextsudo touch /System/Library/Extensions && sudo kextcache -u /

then reboot your system.  Your Atheros wifi should now work.
 
Confirm the kext has loaded by typing kextstat | grep Atheros.  I get the result

Mac-Pro:~ fusion71au$ kextstat | grep Atheros  67    0 0xffffff7f81df4000 0x148000   0x148000   com.apple.driver.AirPort.Atheros40 (700.74.5) 9753F22E-5C85-3E95-B543-0870CF03838A 

 
 

Hi, how to open terminal to run these commands at first boot, sir? At the first time boot from partition installed Mojave, it only show like this
And I realized GUI from boot APFS and HFS patched is different: on APFS boot installer, I can touch safari, time machine. AndHFS installer: none. Anyone same3e49157ff2d6941622412b0eb0074d87.jpg2c5355e600650f34e9b52f7d1793341c.jpg

Gửi từ SM-G955F của tôi bằng cách sử dụng Tapatalk

Share this post


Link to post
Share on other sites
On 10/21/2018 at 3:04 AM, oldman20 said:

hello, i got new problem in other case: i created Installer Mojave with createinstallmedia method, and S/L/Prelinkedkernel inside BaseSystem.dmg - which file not write, only read. So how to put modifed Prelinkedkernel replace for original file, sir?

 

The prelinkedkernel used by the installer is not the read only file inside BaseSystem.dmg.  It is in a hidden folder (unhide with ShowAllFiles.app), full path is /Volumes/Install\ macOS\ Mojave/System/Library/PrelinkedKernels/prelinkedkernel...

 

1162330212_prelinkedkernellocation.png.a2001dcbdb32478ef5681c28ecb60135.png

 

On 10/21/2018 at 5:03 AM, oldman20 said:

Hi, how to open terminal to run these commands at first boot, sir? At the first time boot from partition installed Mojave, it only show like this
And I realized GUI from boot APFS and HFS patched is different: on APFS boot installer, I can touch safari, time machine. AndHFS installer: none. Anyone same3e49157ff2d6941622412b0eb0074d87.jpg2c5355e600650f34e9b52f7d1793341c.jpg

Gửi từ SM-G955F của tôi bằng cách sử dụng Tapatalk
 

 

The terminal app for the installer can be opened by clicking on the Utilities Menu at the top.  However, easier for noob to continue installation on the hard drive (click "My computer does not connect to the internet") ---> set up the new user, then install AirPortAtheros40.kext through terminal or kext utility ---> reboot and wifi can now be set up.

Share this post


Link to post
Share on other sites
Posted (edited)

Those on Mojave who wish to run an older Mac OS X, e.g El Capitan, using the above method,their is a way to Install and run using your CURRENT Clover config.plist.

I currently use iMac18,3 in Mojave/El Capitan

 

Secret is copying PlatformSupport.plist to /S/L/CoreServices in BOTH Installer and Installed.

Copying to Installer requires customizing BaseSystem.dmg, probably for advanced users.

I can use same kexts in both as well.

 

 

Edited by STLVNUB

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DiddyKong
      Fully optimizing DSDT & SSDT for OS X Sierra POST INSTALL on a Dell345MT with a i7 - 920(first gen) 
       
      I know how this forum feels about 3rd party software, but that was just a crutch, I'm 100% vanilla now which is why I'm now posting for help because I eliminated the possibility having to do with 3rd party. Anyways, with that said I just have a couple things I want to be sure of.
       
      I used a n---bistro to get a App Store copy of Sierra, as I didn't know there were other ways of getting it now from a windows10 machine. anyways, I was able to build a vanilla usb. I couldn't figure the EFI out on my vanilla Sierra-usb, but the EFI on the usb-ni---bistro I had would boot my pre-install and post-install. so I was able to install Sierra. After a few days of figuring out how to remake a EFI and config, I broke my EFI.
      So back to my windows10 SSD and I found BootDiskUtility, and that made a EFI usb with the newest version of clover(r4895). So then swapped SSDs back to my OS X, plugged in the BDU-usb, after trial and error I got back into my Sierra. Now with the newest version of clover and no traces of ni---bistro anymore. Then copied the BDU-usb to my SSD EFI and was able to boot without a usb again!! YAY.
       
      Then starting working on fixing my web drivers for my gtx 1050 2gb. Installed the os update so i'm at 10.12.6, pulled my hair out figuring out the web drivers, eventually got them installed and the cuda fixed.
       
      Now all 3 of my screens work, yet windows can't sit 'between' screens, I just simply haven't looked for that fix yet as I want the sys itself running like a top first.
      My screen saver works, I don't get stuck in screensaver, I did once before, I believe lilu.kext and whatevergreen.kext fixed that.
      Now with all that I felt it was time to give my config.plist a diet cos it was bloated, I generated a config copied the clover settings check for check instead of coping text cos I'm trying to shrink it.
      Config.plist boots my system with DSDT-1FE7B5D7
       
      So after the above, This is now where I'm stuck
       a 100% correct DSDT and SSDT, from my understanding with a patched DSDT I wouldn't need any options selected in clover on the ACPI page?
       
      So with the patching part that I think I understand how to do it now, but when I extract with F4 every file has RSDT in front of it, I have one that says RSDP.aml and RSDT.aml
      so would I just erase the RSDT from the beginning of each file then go from their, which would then leave me with a DSDT.aml and 17 SSDTs?
      I know I have to decompile and patch them, but with my file names[DSDT table extract] not matching tutorials online I'm having a difficult time understanding which files I need.
      IS the RDST-DSDT.aml my DSDT? it is the biggest file.
      which ones that have SSDT in the filename is the SSDT(s) I need to patch?
       
      also how do I know if everything is patched correctly? like if my CPU is fully working and not just sorta working that way when I start running software like photoshop, unity, 10 chrome tabs, my hackintosh doesn't crash
       
      System details
      i7 920 (first gen) very similar to nehelam
      GeForce 1050 2Gb (3 monitors connected all work, one acer on HD connection, two HP s2031 on HD, using adapters to change all ports on GPU card to HD for screens)
          display port, HDMI, and HD
      4x 1Gg + 2x 8Gb RAM running at 1066 after injecting smbios with ram info macOS sees all my ram correctly
      Samsung SSD 860 EVO 500Gb
       
      Thanks to anyone that can help me out, I've been working on my system for about two weeks and this is basically the wall I finally can't seem to figure out how to pass
      I can post another info also if it helps
       
      Boot.log
      DSDTdump.Log

    • By mikmavros
      Thanks for accepting
      I recently installed Sierra  and I encounter the following problem ... When I restart or I start up my machine return to BIOS. If anyone knows and can any help be valuable Thank you very much. (When I boot from a Capitan disk in the same machine all  is running well.) Both discs with Clover in Legacy mode.
      gigabyte z68x-ud5-b3 F8
      I7 2600K
      GT 620 ( την βλέπει κανονικά χωρίς Web drivers)
      16 GB ddr3 1600 


    • By renandesouza
      Hi guys, I recently installed OS X 10.10 Yosemite on my PC, everything was fine in the installation, video card already configured and working perfectly, the sound also had no problems, but I just can not connect to the internet, no connection with ethernet etc ... I tested some kex but it did not work.
       
      PC:
      Asus P5GC-MX/1333
      Core 2 Duo E8400 3.0 GHz 
      2GB DDR2 
      ATi HD 5450
      Realtek ALC883 HD Audio
      Atheros L2 Fast Ethernet 
       
      Network Screen Prints:

    • By NoEnd
      Hi team,
       
      I have tried to update to security update 2019-001 multiple time with no luck, today I've booted the update with -verbose and attached videos shows the details.
       
      Appreciate your help
       
      Thanks
      Untitled.mov
    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
×