Recently Browsing 0 members
No registered users viewing this page.
Finaly Success to boot on Sierra 10.12.6 (16G29) with Touchscreen working theres still things to fix but everything is almost working. During the Corvid StayAtHome Period I was able and have time to make this laptop boot on MacOS after a lot of attemps before going back to job. It was the hardest laptop hackintosh install attemp i've done so far and Sierra OS is the only that works. I tried El Capitan and Mojave and its never boot so I not even tested Catalina. I searched on the web and theres no install guide for this specific laptop or no Success install post on this laptop its look like a not very well supported laptop by hackintosh. Maybe some of you can help me correct the things that still not work. Audio work but with voodo (low sound and low quality) I want to make it work with AppleALC to get better quality sound. Thanks in advance
Things that work:
-Trackpad (not the gesture for now) - Backlight Keyboard
-EthernetPort and Wireless (with a wifi dongle. I will change to a broadcom wifi mini-pci chip)
-Brightness Controls with FN key
-Audio Voodoo ''low sound'' (will tried to change to AppleALC or AppleHDA fix method)
Things that not work or need to be fixed:
-Weird double long booting screen-first loading bar on the right. after real loading bar is visible ?
-Audio (Voodoo) work but with low volume sound- still not success to make work AppleALC.kext method
-SENSORS -CPU-HDD Temperatures, BATTERY LEVEL, ETC…
- Sleep (Disabled): USB ports not works after wake from sleep
CPU: Intel Core i7-3687U, 2100 MHz
GPU: Intel HD Graphics 4000
RAM: 12 GB (4GB soldered + 8 GB Samsung DDR3 1600)
Motherboard/Laptop model: Intel Panther Point QM77, Intel Ivy Bridge - (HP Revolve 810 G1)
Audio Codec: IDT 92HD91BXX @ Intel Panther Point PCH - High Definition Audio Controller
Ethernet Card: Intel(R) 82579LM Gigabit Network Connection
Wifi/BT Card: Intel(R) Centrino(R) Advanced-N 6235
HP hs2350 HSPA+ MobileBroadband Network Adapter
CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
Intel Core M 5Y71
Intel HD Graphics 5300
Intel Broadwell-U motherboard
Dell DW1850e WWAN + GNSS GPS
Intel Wireless 7265 + Intel Bluetooth
Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
What doesn’t work
Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
Config.plist got it from Rehabman laptop config.
BIOS version A20
- Legacy Boot Rom
- Secure Boot
- TPM 2.0
SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
-->> DSDT Windows 8 patch
System sees only one I2C Controller which control Touch Screen.
Touch Screen registers as Magic Trackpad 2.
Pen as Mouse
-->> DSDT Windows 8.1 Patch
System sees two I2C Controllers which control Touch Screen and Accelerometer.
Touch Screen registers as Magic Trackpad 2.
Pen as Mouse
OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
Problem is Accelerometer (SHUB).
Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.