Jump to content
murvold

Gigabyte 970 reboots with multiple displays connected at startup

6 posts in this topic

Recommended Posts

Running OSX 10.10.4 on a following setup:


 


mobo: Gigabyte x79 up4 (rev1.0 latest bios version F7)


cpu: i7 3820


gpu: Gigabyte Nvidia 970 mini itx 4gb (latest bios version F4)


ram: 32gb (8*4gb) 1600MHz CL10 Kingston HyperX Fury


hdd: 2*2tb WD Caviar Black + 4tb WD Black for storage


ssd: Samsung Evo 850 Pro 256gb(windows) + Crucial M100 256gb(osx)[planning to switch soon for pcie ssd]


 


bootloader: clover v2 r3253


bootflags: -v kext-dev-mode=1 pcirootuid=1 npci=0x2000 nvda-drv=1


nvidia web drivers: 346.02.02f03


 


Reboots when 1 or more displays are connected via DVI output at startup alongside DisplayPort and/or HDMI. DP and HDMI together boot up fine, but connecting DVI ports in OS it reboots. When booting with DP and/or HDMI + 1 or 2 DVI displays attached it reaches the end of verbose script and reboots. Once I was even able to type in my password at login screen, but usually it reboots just a millisecond before reaching the login screen so I'm not able to see the exact error message. I can attach other displays when fully booted with one display and everything works just fine - Nvidia web drivers are successfully loaded and so far haven't noticed any flickering or other kind of distortions.


 


Anyone familiar with this kind of issue?


 


I also added a bootlog from a successful boot via Clover Configurator, somewhy LogEveryBoot=Yes LogLocation=/Library/Logs/CloverEFI didn't produce any logs


 


Thank you in advance


Edited by murvold

Share this post


Link to post
Share on other sites
Advertisement

Was the PCIRootUID=1 flag needed at all with your setup ?

it was actually recommended by another user here who also had a Gigabyte GPU with Gigabyte Mobo, but I tried to boot without and it works without it. thank you :)

but the initial problem is unfortunately still here...

Share this post


Link to post
Share on other sites

There was actually a guy here who said that nvda_drv=1 flag isn't needed at all when you have finished installing the web drivers from Nvidia. It is automatically added at the end of the installation, onto your nvram. Try removing it and boot

Share this post


Link to post
Share on other sites

Hi, I was struggling many days with corrupt osx partition and managed to fix it with terminal using usb boot. nvda_drv=1 doesn't seem to be in nvram somewhy and booting without it resulted in Web Drivers not loading and GPU not recognized. Anyway I updated my system to 10.10.5 and also updated Web Drivers to fit the version and on first boot with all displays connected I was even able to log in and it restarted after 40 seconds.

Share this post


Link to post
Share on other sites

Hi, here are 2 different system problem reports which I was able to grab. There is a Kernel trap which has different kexts invovled in each report, but maybe some of you know what to look for. And yes sometimes it reboots to BIOS and instantly reboots again to Clover (usually when there are 2 dvi ports connected at startup). Problem report v2 was generated when I had 2 Dell p2415q monitors connected via DisplayPort at startup and the first one was generated with 1 p2415q via DP, 2 Samsung SyncMaster 2443 via DVI and 2 older monitors connected via HDMI splitter to HDMI port.

Problem Report for OS X.txt

Problem Report OSX v2.txt

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By STLVNUB
      Script file to clone Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By ibm650
      New here, I used to do macs but mainly PCs now. So please excuse my ignorance. Mac stores are closed in Arizona, My friend has a circa 2015 Macbook Pro.  On startup, the line goes about halfway and then goes to a spinning icon that goes on and off.  I did a disk repair and permissions , but it still does the same.  So I tried to reload the OS, it says not found, apparently you cannot download Yosemite anymore.  So, the rest of my machines are windows.  Where do I get Yosemite and how can I build it on a Windows machine that I can have the Mac start up. Help please.
    • By TimothyF
      My PROBLEM: I followed the Plain Vanilla guide (https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/) to a T in creating the OS X Catalina installer USB. I'm totally new to Hackintosh, and just want an Apple environment to Time Machine migrate my files and system from my ageing MacBook Pro. When I start to use the USB on the target PC (Dell Inspiron 3847 desktop), I ONLY see the Microsoft (which is the original OS, and on a SEPARATE Hard drive from where I want to install Mac OS), ZERO option for installing the OSX Catalina! Please SEE PICTURE link: https://imgur.com/a/FnLB2Q9   I'm a beginner, but I tried to google my problem. The answers were either incomplete, hard for me to understand and put into action, or were outdated and applied to older OSXs. I appreciate any help in diagnosing and solving this problem!   Clover USB specs OS installer used: Catalina (10.15) Clover revision: 5103 Kexts included: ATH9KFixup.kext AppleALC.kext Lilu.kext RealtekRTL8111.kext USBInjectAll.kext VirtualSMC.kext WhateverGreen.kext config.plist: see attached ------------------------------------------ Target Desktop specs: Dell Inspiron 3847 (64 bit) CPU: Intel Core i5-4460, 3.2 GHz, 4 cores Architecture: Haswell GPU: Intel HD 4600 Motherboard: Dell 088DT1 (version A01) Chipset: Intel H81 Install method: with USB, configured with Clover, 100% following Plain Vanilla guide for Desktops RAM: 12 GB, 2 slots Hard drive for installation: SATA HDD 4TB, by HGST LAN: RTL8111/8168/8411 WLAN: AR9565 (atheros) Audio: Realtek ALC661 (not 100% sure this is correct)   ------------------------------------ Attached:
      Screenshot of Clover installer not showing the Mac OSX option
      config.plist of my installer USB
      Clover_Install_Log.txt (not sure if this is relevant)   THANK YOU VERY MUCH!     config.plist
      Clover_Install_Log.txt
    • By Simon's InsaneMac
      Hi, I'm kind of lost when scrolling to Clover Configurator, so I decided to use an EFI from the web and just configure the most basic stuff. But that sadly didn't work, im always getting the attached screen IMG_0054.HEIC (and I don't know whether all the errors are listed, as I can't scroll). 
      Anyways I thought it'd be better to do a custom setup. Can anyone give me some help with what to choose in the settings? Here's my rig:
      i7 8700k
      Asus z370-G (Rog Strix)
      gtx 1060 6gb
      samsung ssd (SATA)
      WD hard drive
       
      Your help would be much appreciated!
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Current EFIs 
      Updated 26/03/2020
      PLEASE NOTE - You MUST update to the latest Clover EFI before updating to 10.15.4 or you may find your unable to update.
       
      Clover EFI Updated 26/03/20 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Clover Z390 Master Vega Navi EFI 260320.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 260320.zip - R5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (03/03/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (03/03/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Disabled
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

×