Jump to content

clover configurator non monta più partizioni EFI


c.ozzy
 Share

14 posts in this topic

Recommended Posts

Ciao a tutti, 

oggi ho scoperto che Clover configurator NON mi monta più le partizioni EFI. Il programma mi vede correttamente le varie partizioni, ma quando clicco su mount EFI non succede nulla. Ho provato a cancellare l'applicazione e a scaricarla di nuovo, ma niente da fare  :(  :(

Link to comment
Share on other sites

adesso non mi monta la partizione EFI della penna usb che ho creato per installare yosemite...

Ciro82 adesso lo provo :-)


@ciro82:

mi restituisce questo errore:

 

post-1132694-0-16075100-1437667575_thumb.jpg

 

a cosa può essere dovuto?

efi mounter non mi monta alcun file efi, mentre clover configurator mi monta due partizioni efi ma non quella della chiave usb per avviare l'installazione di oso 

Link to comment
Share on other sites

To format the EFI partition proceed as follows:

Run the following commands in the terminal, replacing X by the number of HD.

diskutil list
sudo newfs_msdos -v EFI -F 32 /dev/diskXs1

To mount the EFI partition:

mkdir /Volumes/EFI
sudo mount_msdos /dev/diskXs1 /Volumes/EFI
Link to comment
Share on other sites

iMac-di-Steto:~ steto$ diskutil list

/dev/disk0

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:      GUID_partition_scheme                        *500.1 GB   disk0

   1:                        EFI EFI                     209.7 MB   disk0s1

   2:       Microsoft Basic Data Backup 1TB              499.9 GB   disk0s2

/dev/disk1

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:      GUID_partition_scheme                        *1.0 TB     disk1

   1:       Microsoft Basic Data                         1.0 TB     disk1s1

/dev/disk2

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:      GUID_partition_scheme                        *320.1 GB   disk2

   1:                        EFI EFI                     209.7 MB   disk2s1

   2:                  Apple_HFS YOSEMITE                219.2 GB   disk2s2

   3:                 Apple_Boot Recovery HD             650.0 MB   disk2s3

   4:                  Apple_HFS Recover Yosemite        99.3 GB    disk2s4

iMac-di-Steto:~ steto$ 


 

To format the EFI partition proceed as follows:

Run the following commands in the terminal, replacing X by the number of HD.

diskutil list
sudo newfs_msdos -v EFI -F 32 /dev/diskXs1

i did the format and this is what terminal replied me: is it ok?

iMac-di-Steto:~ steto$ sudo newfs_msdos -v EFI -F 32 /dev/disk2s1

Password:

newfs_msdos: warning: /dev/disk2s1 is not a character device

512 bytes per physical sector

/dev/disk2s1: 403266 sectors in 403266 FAT32 clusters (512 bytes/cluster)

bps=512 spc=1 res=32 nft=2 mid=0xf8 spt=32 hds=32 hid=40 drv=0x80 bsec=409600 bspf=3151 rdcl=2 infs=1 bkbs=6

 

iMac-di-Steto:~ steto$

 

Link to comment
Share on other sites

Like stated above, in Terminal: 

mkdir /Volumes/EFI
sudo mount -t msdos /dev/disk2s1 /Volumes/EFI

Does it mount or give an error? 

 

If it mounts, still no idea why Clover Configurator does not mount it...

it mounts it, but Clover Configurato doesn't...

Link to comment
Share on other sites

 Share

×
×
  • Create New...