Jump to content
Fabio1971

[Guida] Preparazione Usb e installazione OS X 10.11 "El Capitan" con boot Clover/Enoch

388 posts in this topic

Recommended Posts

Scrivo questa Guida per la preparazione e l'installazione di OS X 10.11 "El Capitan" il nuovo sistema di Casa Apple
 

2lcocpd.png

Occorrente :

"OS X El Capitan"
USB 8GB
ShowAllfiles
Kext Wizard
Clover Configurator

Preparazione USB:
Utility Disco selezionare la pendrive Tabelle (GUID) formato Mac OS esteso (journaled) nome Kingston "applica"
Copiate OS X El Capitan sulla scrivania

 

24yn31e.jpg

 

 

Aprite ShowAllfiles per visualizzare i file nascosti.
OS X 10.11 tasto destro - Mostra contenuto pacchetto - Contenuti - Shared Support - InstallESD.dmg - BaseSystem.dmg

 

24mgug1.jpg

 

 

30m4k6f.jpg

 

 

b9jayr.jpg

 

14u9biv.jpg

 

Tramite Utily Disco, da sinistra selezionate BaseSystem.dmg e cliccate su ripristina: su Sorgente mettete "OS X BaseSystem" e su Destinazione la penna USB



efi2yv.jpg


Ripristina, verranno copiati i file sulla usb.

Terminato il processo rinominate OS X BaseSystem a "USB" da "OS X 10.11 tasto destro - Mostra contenuto pacchetto - Contenuti - Shared Support - InstallESD.dmg" montate "InstallESD.dmg" copiare "Packages" e recatevi su System/Installation della USB cancellate il collegamento Packages e incollare.



ie1hxx.jpg

 

zsnvjp.jpg

 

2q1b134.jpg

 

6xvojs.jpg

 

 

 

Da "InstallESD.dmg copiare BaseSystem.dmg e BaseSystem.chunklist nella root della USB



5mi8as.jpg

 

 


La usb è finita ora dobbiamo "Finalizzare Installer" con l'installare il bootloader Clover _2.3K_r3253

 

Clover r3253

in UEFI

 

                               

6fsiz8.jpg

 

20px8ra.jpg

 

 

15dev7.jpg

 

 

Scegliete un Tema ha vostro piacimento

 

 

 

2d97e4z.jpg

 

 

2ik4j75.jpg

 

 

Vi troverete montata sul desktop la cartella EFI recatevi in EFI/Clover/kexts/1(Creare una cartella) e rinominatela in 10.11 al suo interno copiate FakeSMC.kext
Con app Clover Configurator importare e modificate il config.plist alla voce Boot : Verbose (-v) -- kext-dev-mode=1 rootless=0

 

33vf294.jpg

 

 

 

Alla voce System Parameters : Inject Kext Yes

 

 

kdl84i.jpg

 

 

Salvate il config.plist con app Kext Wizard riparare permessi e cache.

 

La usb è finita ora dobbiamo "Finalizzare Installer" con l'installare il bootloader Clover _2.3K_r3253

 

Clover r3253

in LEGACY

 

 

 

6fsiz8.jpg

 

20px8ra.jpg

 

 

foddhe.jpg

 

 

Scegliete un Tema ha vostro piacimento

 

 

2d97e4z.jpg

 

sq08c2.jpg

 

 

 

 

Vi troverete montata sul desktop la cartella EFI recatevi in EFI/Clover/kexts/1(Creare una cartella) e rinominatela in 10.11 al suo interno copiate FakeSMC.kext
Con app Clover Configurator importare e modificate il config.plist alla voce Boot : Verbose (-v) -- kext-dev-mode=1 rootless=0

 

33vf294.jpg

 

 

Alla voce System Parameters : Inject Kext Yes

 

kdl84i.jpg

 

 

Salvate il config.plist con app Kext Wizard riparare permessi e cache.

 

La usb è finita ora dobbiamo "Finalizzare Installer" con l'installare il bootloader Enoch r2737

 


Enoch r2737

in LEGACY

 

 

La usb è finita ora dobbiamo "Finalizzare Installer" installando il bootloader Enoch r2737

 

Il bootloader Enoch (Legacy) per chi non lo sapesse è il cugino di Chameleon boot sviluppato da ErmaC 

 

Qui : http://www.insanelymac.com/forum/topic/278638-enoch-bootloader/

 

 

 

1pbcsn.jpg

 

2n6hqnl.jpg

 

157yyzd.jpg

 

fzb2vp.jpg

 

166by9d.jpg

 

 

Non servono aggiungere per l'installazione le due flag : kext-dev-mode=1 e rootless=0

 

 

2lcpnjc.jpg

 

 

28rp4yo.jpg

 

 

 

Il file org.chameleon.Boot.plist come es.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>Kernel Flags</key>
	<string></string>
	<key>KeyLayout</key>
	<string>mac-it</string>
	<key>UseKernelCache</key>
	<string>No</string>
</dict>
</plist>

Installate con Kext Wizard FakeSMC.kext in S/LE

 

Con Kext Wizard riparare permessi e cache.

 

Fabio

Share this post


Link to post
Share on other sites
Advertisement

Post Riservato

 

OS X 10.11 "El Capitan" : https://developer.apple.com/osx/download/

 

Bootloader Clover_2.3k_r32xx : http://sourceforge.net/projects/cloverefiboot/

 

Bootloader Enoch r2725 : http://www.insanelymac.com/forum/files/file/71-enoch/

 

Kext Wizard : Kext Wizard.zip

 

Chameleon Wizard : Chameleon Wizard.zip

 

ShowAllFiles : ShowAllFiles.zip

 

Clover Configurator : http://mackie100projects.altervista.org/download/

 

FakeSMC.kext  : FakeSMC.kext.zip http://sourceforge.net/projects/hwsensors/

 

Property List Editor : http://www.insanelymac.com/forum/topic/282787-clover-v2-instructions/page-3

 

=======================================================================

 

Modifica bootloader Clover

 

Bootloader Clover _2.3K_r3253

 

Eseguita l'installazione dobbiamo editare il config.plist utilizzando un editor di testo ed eseguire delle modifiche :

<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>kext-dev-mode=1 rootless=0</string>
		<key>Debug</key>
		<false/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>false</string>
	</dict>
        <key>RtVariables</key>
            <dict>
                <key>CsrActiveConfig</key>
                <string>0x67</string>
                <key>BooterConfig</key>
                <string>0x28</string>
           <dict>
 </dict>

Installare i kext in L/E ho in S/L/E riparare i permessi e cache

 

Editiamo una seconda volta il config.plist e modificate :

<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>kext-dev-mode=1</string>
		<key>Debug</key>
		<false/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>false</string>
	</dict>
        <key>RtVariables</key>
            <dict>
                <key>CsrActiveConfig</key>
                <string>0x00</string>
                <key>BooterConfig</key>
                <string>0x28</string>
           <dict>
 </dict>

Reboot

 

In questo caso avrete : System Integrity Protection (SIP) abilitato

iMac-di-Fabio:~ fabio$ csrutil status
System Integrity Protection status: enabled.

Share this post


Link to post
Share on other sites

fatto tutto ma non parte installazione si riavvia senza darmi nessun errore :(

Hardware é quello in firma se si, devi utilizzare HD4600 come video la 750 ha bisogno dei driver nVidia

 

Fabio

Share this post


Link to post
Share on other sites

@fabio installato funziona ma adesso quando attacco la scheda non si avvia come faccio ad usarlo senza usare la integrata visto che per usare la integrata la devo attaccare tramite hdmi alla tv perche il monitor che ho non a hdmi :(

Share this post


Link to post
Share on other sites

@fabio installato funziona ma adesso quando attacco la scheda non si avvia come faccio ad usarlo senza usare la integrata visto che per usare la integrata la devo attaccare tramite hdmi alla tv perche il monitor che ho non a hdmi :(

I driver nVidia non ci sono ancora e per la 750 servono i driver

L'alternativa é un cavo hdmi-dvi ho un adattatore

 

Fabio

Share this post


Link to post
Share on other sites

Hai preso anche te la Z97 pro wifi.....eh eh.... :thumbsup_anim: .....ti ho fatto "tribolare" all'inizio....ma allo stesso tempo, ti ho fatto venire "l'acquolina In bocca".... :hysterical:

Purtroppo lo script di toleda...niente audio....

...per ora....

Share this post


Link to post
Share on other sites

Hai preso anche te la Z97 pro wifi.....eh eh.... :thumbsup_anim: .....ti ho fatto "tribolare" all'inizio....ma allo stesso tempo, ti ho fatto venire "l'acquolina In bocca".... :hysterical:

Purtroppo lo script di toleda...niente audio....

...per ora....

Tutta invidia, prova AppleHDA di Yosemite

 

Fabio

Share this post


Link to post
Share on other sites

Ho problemi ha riparare i permessi e  cache, devo sempre ripararli dopo da Yosemite.

Determinate operazioni, mi viene esce un errore.


solito problema anche dopo aver messo AppleHDA di yosemite

Schermata 2015-06-11 alle 21.29.55.png

Share this post


Link to post
Share on other sites

Ciao a tutti.

 

A gengik84 

 

Ma da terminale ripara? 

Ciao Copil, ho provato un paio di volte ma il terminale, ma si è "impallato" , sono stato costretto ad spengere da pulsante . 

Successivamente ho adottato l altra strada.   Utility disco sembra incompleto. 

Comunque non ho potuto provare più di tanto, appena potrò, lo farò 

Share this post


Link to post
Share on other sites

Calcola che é la prima beta, quindi piena bug

 

Fabio

Certamente, ne sono consapevole e come ho già detto per ora va strabene così... :)  

L audio sei riuscito a farlo funzionare? 

Share this post


Link to post
Share on other sites

Ciao, incuriosito volevo provare questo sistema operativo, ho seguito alla lettera la guida, il problema che ho è che non mi parte al riavvio la usb, non capisco cosa sbaglio con clover, sinceramente non ho ancora capito questo bootloader 

mi sapete dare un aiuto a capire cosa sbaglio

grazie

Share this post


Link to post
Share on other sites

Ciao, incuriosito volevo provare questo sistema operativo, ho seguito alla lettera la guida, il problema che ho è che non mi parte al riavvio la usb, non capisco cosa sbaglio con clover, sinceramente non ho ancora capito questo bootloader 

mi sapete dare un aiuto a capire cosa sbaglio

grazie

La guida è preparata per l'avvio in uefi, da bios devi aver impostato "Boot device controll" Uefi and Legasy"  ho simile 

 

Ciao a tutti.

Fabio ma perché OSxAptioFix2 e non 1?

Meglio usare quest'ultima?

Nel mio caso si, utilizzo l'integrata e nVidia come schede video

 

Fabio

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rodrinico19
      Hola a todos, primero que nada estoy muy contento de a ver econtrado un foro de español sobre hackintosh.
      Mi problema consesite en que descargue unos drivers de esta pagina: https://github.com/chris1111/Wireless-USB-Adapter-Clover
      Seguí los pasos instale los kets en la carpeta EFI/CLOVER/OTHERS todo tal cual como dice ahi la instalación. luego segui los pasos de configurar la red dentro de configuracion del sistema etc.
      Lo cual el nombre me quedo en en0.
      El driver o kets funciona bien es reconocible por el S.O de hecho conecta la red, pero me dice que no tiene IP AUTO ASIGNADA Y LA OTRA QUE HAY UNA DESCONEXION A CADA RATO(como que desconectaras y conectaras el dispositvo usb a cada rato)
      Me gustaria que me ayuden con eso si es posible, Muchas Gracias!!
    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
×