Jump to content
rimkashox

DSDT tweaks for GA-z97x-UD3H

3 posts in this topic

Recommended Posts

Hello people,

 

I have a working build and patched DSDT for my build running:

  • GA-z97x-UD3H with latest F8 bios
  • i7-4970K (with custom SSDT to enable PM)
  • Angelbird SSD with native TRIM
  • Integrated HD4600 graphics (AZUL B patch from Toleda to use HDMI properly, even HDMI audio).
  • Integrated ALC1150 (used Toleda RealtekALC).
  • I use both Clover and Chimera, both installed, clover as EFI only. Respective config files totally empty. With patched DSDT and SSDT (latter only to enable PM).
  • Clover appears most stable, the only option i use in Clover is XMPDetection=Yes (to detect RAM correctly) under clover configurator and iMac 15,1 5K definition

My minimal issues:

  1. I only notice ramdom bugs or kernel panic after sleep, but not always. Can you check my WAK method ? Or anything that might be causing that...
  2. Also I was not successful in renaming GFX0 to IGPU, everytime i did it I got a freeze or kernel panic at boot. 
  3. Finally, I'm not sure about the OSI definitions. I don't see darwin in there.

Issue 1 is the only real priority.

 

Can you guys please take a look at my DSDT and fix anything you see isn't right ? Or advise me otherwise...

 

Attached is my present working DSDT, SSDT (just in case you need it, but normally needs no change), and IOJones output.

 

Cheers

GA-z97x-UD3H DSDT and more.zip

Share this post


Link to post
Share on other sites
Advertisement

Anyone ? My system is good, but not 100%, especially after sleep, random application close and kernel panic... And sometimes on shutdown panic also !

Share this post


Link to post
Share on other sites

Alright people, for me things are much better with my mobo GA-z97x-UD3H, with in bios XMP Profile 1 + memory enhanced stability option. I'm using Crucial ballistic tactical. Dual channel setup..

 

Cheers 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
    • By ignn
      Hello!
      I want install Hackintosh on my hardware
      Motherboard: Gigabyte B360M-HD3
      CPU: I3-8100
      GPU: Intel HD630
       
      Anyone has had experience installing on this hardware? Is there a guide? Thanks in advance
    • By Amit Meena
      This card is working OOB, but it has some graphical issues as per attachments.

      If someone has a solution please share.






    • By jamesxxx1997
      Hi everyone~
      Now using mojave 10.14.4 , I am patching my dsdt and ssdt but have four syntax error with my dsdt.dsl , and I don't know how to fix it.
       
      My specs:
      lenovo thinkpad x1 yoga 3rd
      CPU : i7-8550u
      graphics : uhd620
       
      The file of my dsdt and ssdt , ioreg , and my efi is in this link:https://drive.google.com/drive/folders/1T1nv1QgqDtczXrohdlQUJ_8O-kPpoSEf?usp=sharing
       
      thanks!
    • By bcuraboy3
      Good morning everyone. I have a HP Pavillion with the following specs
      I have managed to install MOjave on it, using Rehabman's config for Intel HD5500. 
      But I need some help with a DSDT for it.
      Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
      and help me with a good DSDT patched and a correct config.plist for it?   
      Thank you very much.  Highly appreciated 
      I have also included a report from Aida64 in case anyone needs it 
       
      15-p200np
       
      Número do equipamento
      L5Z67EA
      Microprocessador
      Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
      Memória
      SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
      Placa de vídeo
      NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >>  disabled already using the config.plist provided 
      Disco rígido
      SATA 1 TB 5400 rpm
      Unidade multimédia
      Gravador de DVD SuperMulti
      Visor
      HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
      Placa de rede
      Ethernet LAN Base-T 10/100 integrada
      Conectividade sem fio
      Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way 
      Som
      BeatsAudio com 2 altifalantes >>  it's a ALC 290 
      Teclado
      Tamanho completo tipo ilha com teclado numérico
      Dispositivo
      HP Imagepad com suporte de gestos multi-toque
      Portas externas
      1 leitor de cartões multimédia SD multi-formato
      1 HDMI
      1 combinação auscultadores/microfone
      1 USB 2.0
      2 USB 3.0
      1 RJ-45
      Dimensões
      38,45 x 26,02 x 2,39 cm
      Peso
      2,27 kg
      Alimentação
      Transformador de alimentação CA de 65 W
      Polímero de iões de lítio 4 cél. 41 Wh
      Câmara
      Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
      Mac-Pro-Noi.zip
      Report.htm
×