jsgates Posted April 13, 2015 Share Posted April 13, 2015 Hello. I am looking for some assistance troubleshooting Clover Custom Boot Entries. I cannot get Clover to display my custom boot entries. Looking at the bootlog.log file, I see that it is still showing Custom Entries as disabled. I don't know how to turn this on. There does not appear to be a general key entry to enable/disable custom entries. å In Clover Configurator (Yosemite version), I have added my custom entries for Linux Mint, OS X, & Windows 7. Also in Clover Configurator the Entries checkbox is checked as well as scan and kernel. All installed OSes are installed and bootable in UEFI mode. Here is my bootlog.log. Can anybody tell me why Custom Entries are still showing as disabled in the log? Any help is extremely appreciated. Also, laptop I'm using is a Dell XPS 14Z. To boot Clover, I have to rename the Microsoft bootmgfw.efi to bootmgfw-MS.efi, and then rename CloverX64.efi to bootmgfw.efi and put it in the \EFI\Microsoft\Boot folder. 0:100 0:100 MemLog inited, TSC freq: 2494335804 0:100 0:000 0:100 0:000 Now is 13.4.2015, 1:5:18 (GMT+2047) 0:100 0:000 Starting Clover rev 3193 on INSYDE Corp. EFI 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000) @AA833D98 0:100 0:000 SelfDirPath = \EFI\CLOVER 0:100 0:000 Total Memory Slots Count = 2 0:100 0:000 Type 17 Index = 0 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 Type 17 Index = 1 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 2048MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 Boot status=0 0:100 0:000 Clover revision: 3193 running on XPS L412Z 0:100 0:000 ... with board 008DD8 0:100 0:000 CPU Vendor = 756E6547 Model=206A7 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz 0:100 0:000 MSR 0xE2 before patch 1E008404 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xE4 00020414 0:100 0:000 MSR 0xCE 00000800_60011900 0:100 0:000 non-usable FLEX_RATIO = 1FF00 0:100 0:000 MSR 0x1B0 00000000 0:100 0:000 FSBFrequency=100MHz DMIvalue=1333330kHz 0:100 0:000 Corrected FSBFrequency=100MHz 0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x2A/0x7 0:100 0:000 Family/ExtFamily: 0x6/0x0 0:100 0:000 MaxDiv/MinDiv: 25.0/8 0:100 0:000 Turbo: 29/29/29/31 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 2 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 2500 MHz 0:100 0:000 TSC: 2500 MHz 0:100 0:000 PIS: 400 MHz 0:100 0:000 PCI (00|00:00.00) : 8086 0104 class=060000 0:100 0:000 PCI (00|00:02.00) : 8086 0126 class=030000 0:100 0:000 Found GFX model=Intel HD Graphics 3000 0:100 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000 0:100 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400 0:100 0:000 PCI (00|01:00.00) : 1969 1083 class=020000 0:100 0:000 LAN 0, Vendor=1969, MMIO=C2800000 0:100 0:000 PCI (00|00:1C.02) : 8086 1C14 class=060400 0:100 0:000 PCI (00|02:00.00) : 14E4 43B1 class=028000 0:100 0:000 PCI (00|00:1C.03) : 8086 1C16 class=060400 0:100 0:000 PCI (00|03:00.00) : 10EC 5209 class=FF0000 0:100 0:000 PCI (00|00:1C.05) : 8086 1C1A class=060400 0:100 0:000 PCI (00|09:00.00) : 104C 8241 class=0C0330 0:100 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 1C4B class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 1C03 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500 0:100 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 0:100 0:000 Clover load options size = 40 bytes 0:100 0:000 Clover started with option to boot bootmgfw.efi from ESP 0:114 0:013 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:114 0:000 EFI\CLOVER\config.plist loaded: Success 0:115 0:000 Found theme directory: applestyle 0:120 0:005 Found theme directory: BGM 0:127 0:006 Found theme directory: black_green 0:132 0:004 Found theme directory: bootcamp 0:140 0:007 Found theme directory: embedded 0:140 0:000 Found theme directory: iclover 0:143 0:003 Found theme directory: metal 0:152 0:009 Found theme directory: random 0:153 0:000 Loading early settings 0:153 0:000 timeout set to 5 0:153 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:153 0:000 Default theme: embedded 0:153 0:000 Hiding entries with string EntryPath_NOT_SHOWN 0:153 0:000 Hiding entries with string VolumeUUID_NOT_SHOWN 0:153 0:000 Hiding entries with string VolumeName_NOT_SHOWN 0:153 0:000 Copying global patch settings 0:153 0:000 LoadDrivers() start 0:160 0:006 Loading FSInject-64.efi status=Success 0:160 0:000 Loading OsxAptioFixDrv-64.efi status=Success 0:160 0:000 Loading OsxFatBinaryDrv-64.efi status=Success 0:164 0:004 Loading PartitionDxe-64.efi status=Success 0:165 0:000 - driver needs connecting 0:165 0:000 Loading HFSPlus.efi status=Success 0:176 0:011 - driver needs connecting 0:176 0:000 Loading NTFS.efi status=Success 0:177 0:000 - driver needs connecting 0:177 0:000 3 drivers needs connecting ... 0:177 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:177 0:000 Partition driver loaded: CD disconnect Success 0:177 0:000 HFS+ driver loaded 0:177 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:907 0:729 LoadDrivers() end 0:907 0:000 Dump SMC keys from NVRAM: 0:907 0:000 SetScreenResolution: 1366x768 - not found! 0:907 0:000 SetMaxResolution: found best mode 0: 1024x768 0:907 0:000 - already set 0:907 0:000 Console modes reported: 4, available modes: 0:907 0:000 Mode 1: 80x25 0:907 0:000 Mode 3: 100x31 0:907 0:000 Mode 4: 128x40 (current mode) 0:907 0:000 SetScreenResolution: 1024x768 - already set 0:953 0:045 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000) 0:953 0:000 ScanSPD() start 0:954 0:000 SMBus CmdReg: 0x3 0:954 0:000 Scanning SMBus [8086:1C22], mmio: 0xC2905004, ioport: 0x4040, hostc: 0x1 0:954 0:000 Slots to scan [8]... 0:968 0:014 SPD[0]: Type 11 @0x50 0:977 0:008 DDR speed 1333MHz 0:977 0:000 Slot: 0 Type 24 4096MB 1333MHz Vendor=Nanya Technology PartNo=NT4GC64B8HG0NS-CG SerialNo=070B0A0B0100060F 0:997 0:020 SPD[2]: Type 11 @0x52 1:006 0:008 DDR speed 1333MHz 1:006 0:000 Slot: 2 Type 24 2048MB 1333MHz Vendor=Hynix Semiconductor PartNo=HMT325S6CFR8C-H9N0 SerialNo=0008080B0A0D0D06 1:036 0:030 ScanSPD() end 1:037 0:000 Found UEFI Acpi 2.0 RSDP at ACFFE014 1:037 0:000 Get Acpi Tables List from RSDT: 1:037 0:000 Found table: FACP CL09 len=244 1:037 0:000 Found table: SLIC CL09 len=374 1:037 0:000 Found table: ASF! CL09 len=165 1:037 0:000 Found table: HPET CL09 len=56 1:037 0:000 Found table: APIC CL09 len=140 1:037 0:000 Found table: MCFG CL09 len=60 1:037 0:000 Found table: SSDT H2O BIOS len=4200 1:037 0:000 Found table: BOOT CL09 len=40 1:037 0:000 Found table: ASPT CL09 len=52 1:037 0:000 Found table: MSDM CL09 len=85 1:037 0:000 Found table: SSDT Cpu0Ist len=2052 1:037 0:000 Found table: SSDT CpuPm len=2454 1:037 0:000 Calibrated TSC frequency =2494335804 =2494MHz 1:037 0:000 Loading main settings 1:037 0:000 Read NVCAP:0000000000000000000000000000000000000000 1:037 0:000 USB FixOwnership: true 1:037 0:000 Config set Fixes will override FixMask mask! 1:037 0:000 final mask=98100000 1:037 0:000 Config set ResetAddr=0x0 1:037 0:000 Config calc ResetVal=0x0 1:037 0:000 Config set ResetVal=0x0 1:037 0:000 Config set ChassisType=0x8 1:037 0:000 Config set QPI = 0 disable table132 1:037 0:000 Config set CpuFreq=2494MHz 1:037 0:000 Config set CpuType=603 1:037 0:000 Config set BusSpeed=99773kHz 1:037 0:000 Error: invalid CustomUUID '' - should be in the format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX 1:065 0:028 found 15 volumes with blockIO 1:065 0:000 0. Volume: 1:065 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 1:074 0:008 1. Volume: 1:074 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0) 1:076 0:001 Result of bootcode detection: bootable unknown (legacy) 1:076 0:000 USB volume 1:076 0:000 USB volume 1:076 0:000 2. Volume: 1:076 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,GPT,61C86BA3-3870-4B3E-BF4A-EA5FCE3D861F,0x28,0x64000) 1:078 0:002 Result of bootcode detection: bootable unknown (legacy) 1:078 0:000 USB volume 1:078 0:000 USB volume 1:078 0:000 3. Volume: 1:078 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(2,GPT,FE7E255A-ECBD-4491-9CA5-60B90330C33B,0x64028,0x12A05F8) 1:080 0:002 Result of bootcode detection: bootable unknown (legacy) 1:080 0:000 USB volume 1:080 0:000 USB volume 1:080 0:000 4. Volume: 1:080 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(3,GPT,5063EAE5-B310-4B28-B56F-5899DA77EAF6,0x1344620,0xA4D1B8) 1:083 0:002 USB volume 1:083 0:000 USB volume 1:083 0:000 5. Volume: 1:083 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000) 1:084 0:001 Result of bootcode detection: bootable unknown (legacy) 1:091 0:006 This is SelfVolume !! 1:091 0:000 6. Volume: 1:091 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B98AE6F3-258E-4FA9-A641-0DA4E7068BCA,0x113800,0x8A17800) 1:100 0:009 Result of bootcode detection: bootable Windows (vista,win) 1:100 0:000 7. Volume: 1:100 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,2DB836FE-DB94-4FB9-84A3-5ECC4C7DBAF8,0x8B2B000,0x40000) 1:115 0:014 8. Volume: 1:115 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,23DF0986-58CF-4F8F-B75C-B3E6C9691183,0x8B6B000,0x13CD8800) 1:120 0:005 9. Volume: 1:120 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,B88E4052-9D3E-43B2-BF3D-D42C026FE0C3,0x1C843800,0x136000) 1:120 0:000 10. Volume: 1:120 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,E15A9D09-7860-42D7-AAC2-11AD0C058E30,0x1C979800,0x323B800) 1:121 0:000 11. Volume: 1:121 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(7,GPT,662E4917-53FD-40DB-B5CE-1727A29FED31,0x1FBB5000,0xB90F800) 1:121 0:000 12. Volume: 1:121 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,F6E7F8F2-A056-4661-99C7-6D3E33E17C92,0x2B4C4800,0xEA75800) 1:121 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:121 0:000 13. Volume: 1:121 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(9,GPT,649CDE32-4194-4F35-8C50-EFE0057CB0A4,0x39F3A000,0x44C000) 1:121 0:000 14. Volume: 1:121 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 1:121 0:000 found optical drive 1:122 0:000 using embedded theme 1:122 0:000 Choosing theme <null string> 1:126 0:004 Custom entries start 1:126 0:000 Custom entry 0 FullTitle:"Linux Mint" Path:"\EFI\ubuntu\grubx64.efi" Type:4 Flags:0x0 matching Volume:"E15A9D09-7860-42D7-AAC2-11AD0C058E30" 1:126 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,GPT,61C86BA3-3870-4B3E-BF4A-EA5FCE3D861F,0x28,0x64000)) ... skipped because media is ignored 1:126 0:000 Checking volume "Install OS X Yosemite" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(2,GPT,FE7E255A-ECBD-4491-9CA5-60B90330C33B,0x64028,0x12A05F8)) ... skipped because media is ignored 1:126 0:000 Checking volume "Files" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(3,GPT,5063EAE5-B310-4B28-B56F-5899DA77EAF6,0x1344620,0xA4D1B8)) ... skipped because media is ignored 1:126 0:000 Checking volume "ESP" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000)) ... skipped 1:126 0:000 Checking volume "Windows7" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B98AE6F3-258E-4FA9-A641-0DA4E7068BCA,0x113800,0x8A17800)) ... skipped 1:126 0:000 Checking volume "Yosemite" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,23DF0986-58CF-4F8F-B75C-B3E6C9691183,0x8B6B000,0x13CD8800)) ... skipped 1:126 0:000 Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,B88E4052-9D3E-43B2-BF3D-D42C026FE0C3,0x1C843800,0x136000)) ... skipped 1:126 0:000 Checking volume "Shared Data" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,F6E7F8F2-A056-4661-99C7-6D3E33E17C92,0x2B4C4800,0xEA75800)) ... skipped 1:126 0:000 Custom entry 1 FullTitle:"Mac OS X" Path:"\EFI\APPLE\EXTENSIONS\Firmware.scap" Type:1 Flags:0x6 matching Volume:"23DF0986-58CF-4F8F-B75C-B3E6C9691183" 1:126 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,GPT,61C86BA3-3870-4B3E-BF4A-EA5FCE3D861F,0x28,0x64000)) ... skipped because media is ignored 1:126 0:000 Checking volume "Install OS X Yosemite" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(2,GPT,FE7E255A-ECBD-4491-9CA5-60B90330C33B,0x64028,0x12A05F8)) ... skipped because media is ignored 1:126 0:000 Checking volume "Files" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(3,GPT,5063EAE5-B310-4B28-B56F-5899DA77EAF6,0x1344620,0xA4D1B8)) ... skipped because media is ignored 1:126 0:000 Checking volume "ESP" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000)) ... skipped 1:126 0:000 Checking volume "Windows7" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B98AE6F3-258E-4FA9-A641-0DA4E7068BCA,0x113800,0x8A17800)) ... skipped 1:126 0:000 Checking volume "Yosemite" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,23DF0986-58CF-4F8F-B75C-B3E6C9691183,0x8B6B000,0x13CD8800)) ... skipped because path does not exist 1:126 0:000 Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,B88E4052-9D3E-43B2-BF3D-D42C026FE0C3,0x1C843800,0x136000)) ... skipped 1:126 0:000 Checking volume "Shared Data" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,F6E7F8F2-A056-4661-99C7-6D3E33E17C92,0x2B4C4800,0xEA75800)) ... skipped 1:126 0:000 Custom entry 2 FullTitle:"Windows 7" Path:"\EFI\Microsoft\Boot\bootmgfw-MS.efi" Options:"-s -h" Type:7 Flags:0x0 matching Volume:"B98AE6F3-258E-4FA9-A641-0DA4E7068BCA" 1:126 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,GPT,61C86BA3-3870-4B3E-BF4A-EA5FCE3D861F,0x28,0x64000)) ... skipped because media is ignored 1:126 0:000 Checking volume "Install OS X Yosemite" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(2,GPT,FE7E255A-ECBD-4491-9CA5-60B90330C33B,0x64028,0x12A05F8)) ... skipped because media is ignored 1:126 0:000 Checking volume "Files" (PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(3,GPT,5063EAE5-B310-4B28-B56F-5899DA77EAF6,0x1344620,0xA4D1B8)) ... skipped because media is ignored 1:126 0:000 Checking volume "ESP" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000)) ... skipped 1:126 0:000 Checking volume "Windows7" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B98AE6F3-258E-4FA9-A641-0DA4E7068BCA,0x113800,0x8A17800)) ... skipped because path does not exist 1:134 0:008 Checking volume "Yosemite" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,23DF0986-58CF-4F8F-B75C-B3E6C9691183,0x8B6B000,0x13CD8800)) ... skipped 1:134 0:000 Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,B88E4052-9D3E-43B2-BF3D-D42C026FE0C3,0x1C843800,0x136000)) ... skipped 1:134 0:000 Checking volume "Shared Data" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,F6E7F8F2-A056-4661-99C7-6D3E33E17C92,0x2B4C4800,0xEA75800)) ... skipped 1:134 0:000 Custom entries finish 1:134 0:000 Scanning loaders... 1:134 0:000 0: 'Whole Disc Boot' no file system 1:134 0:000 1: 'Whole Disc Boot' no file system 1:134 0:000 2: 'EFI' 1:134 0:000 3: 'Install OS X Yosemite' 1:137 0:002 AddLoaderEntry for Volume Name=Install OS X Yosemite 1:358 0:220 4: 'Files' 1:358 0:000 5: 'ESP' 1:358 0:000 AddLoaderEntry for Volume Name=ESP 1:360 0:001 AddLoaderEntry for Volume Name=ESP 1:361 0:001 6: 'Windows7' 1:378 0:017 7: 'Legacy HD3' no file system 1:378 0:000 8: 'Yosemite' 1:405 0:027 AddLoaderEntry for Volume Name=Yosemite 1:433 0:027 Check if volume Is Hibernated: 1:433 0:000 Check sleep image 'by signature': 1:458 0:025 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 1:458 0:000 using default sleep image name = \private\var\vm\sleepimage 1:473 0:014 Reading first 512 bytes of sleepimage ... 1:486 0:012 OurBlockIoRead: Lba=A2AB000, Offset=1455600000 (BlockSize=512) 1:486 0:000 sig lion: 7A7A7A7A 1:486 0:000 sig snow: 0 1:486 0:000 no valid sleep image offset was found 1:486 0:000 Reading completed -> Success 1:486 0:000 sleepimage offset could not be acquired 1:486 0:000 hibernated: no - sign 1:487 0:001 9: 'Recovery HD' 1:503 0:015 AddLoaderEntry for Volume Name=Recovery HD 1:514 0:011 10: 'Legacy HD6' no file system 1:514 0:000 11: 'Legacy HD7' no file system 1:514 0:000 12: 'Shared Data' 1:533 0:018 13: 'Legacy HD9' no file system 1:533 0:000 14: 'Whole Disc Boot' no file system 1:533 0:000 Custom legacy start 1:533 0:000 Custom legacy end 1:533 0:000 Custom tool start 1:533 0:000 Custom tool end 1:553 0:020 found tool \EFI\CLOVER\tools\Shell64U.efi 1:553 0:000 Checking EFI partition Volume 2 for Clover 1:553 0:000 Checking EFI partition Volume 5 for Clover 1:553 0:000 Found Clover 1:554 0:000 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 1:558 0:004 EfiBootVolume not found 1:558 0:000 found entry 1. 'Boot Microsoft EFI boot menu from ESP', Volume 'ESP', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,79828B41-7851-44C6-A50B-033A6EAFB899,0x800,0x113000)\EFI\microsoft\Boot\bootmgfw.efi' 1:558 0:000 DefaultIndex=1 and MainMenu.EntryCount=11 1:628 0:070 GUI ready 3:576 1:947 BootOption of the entry is empty 3:576 0:000 StartLoader() start 3:576 0:000 Finally: Bus=99773kHz CPU=2494MHz 3:576 0:000 Kernel and Kext Patches at A8A1CA30: 3:576 0:000 Allowed: y 3:576 0:000 Debug: n 3:576 0:000 KernelCpu: n 3:576 0:000 Lapic: y 3:576 0:000 Haswell-E: n 3:576 0:000 AICPUPM: y 3:576 0:000 AppleRTC: y 3:576 0:000 KernelPm: y 3:576 0:000 FakeCPUID: 0x0 3:576 0:000 ATIController: null 3:576 0:000 ATIDataLength: 0 3:576 0:000 0 Kexts to load 3:576 0:000 0 Kexts to patch 3:576 0:000 Loading boot.efi status=Success 3:659 0:083 GetOSVersion: : 10.10.2 3:659 0:000 insert table 9 for dev 0:0 3:659 0:000 insert table 9 for dev 0:0 3:660 0:000 Detected alternating SMBIOS channel banks 3:660 0:000 Channels: 2 3:660 0:000 Interleave: 0 2 1 3 4 6 5 7 3:660 0:000 SMBIOS Type 17 Index = 0 => 0 0: 3:660 0:000 BANK0 DIMM0 1333MHz 4096MB 3:660 0:000 mTotalSystemMemory = 4096 3:660 0:000 SMBIOS Type 17 Index = 1 => 1 2: 3:660 0:000 BANK1 DIMM0 1333MHz 2048MB 3:660 0:000 mTotalSystemMemory = 6144 3:660 0:000 NumberOfMemoryDevices = 2 3:660 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000 3:660 0:000 Type20[1]->End = 0x5FFFFF, Type17[1] = 0x2800 3:660 0:000 RSDT 0xACFFE0AC 3:660 0:000 FADT from RSDT: 0xACFFB000 3:660 0:000 XSDT 0xACFFE120 3:660 0:000 FADT from XSDT: 0xACFFB000 3:660 0:000 Xsdt reallocation done 3:660 0:000 old FADT length=F4 3:660 0:000 Found OperationRegion(GNVS, SystemMemory, ACFBCE18, ...) 3:660 0:000 Found OperationRegion(OGNS, SystemMemory, ACFBA018, ...) 3:660 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...) 3:660 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...) 3:660 0:000 Found OperationRegion(NVIA, SystemMemory, E0101000, ...) 3:660 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...) 3:660 0:000 Found OperationRegion(MDBG, SystemMemory, ACF6A018, ...) 3:670 0:010 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml 3:670 0:000 Apply DsdtFixMask=0x98100000 new way 3:670 0:000 drop _DSM mask=0x0000 3:670 0:000 ========= Auto patch DSDT Starting ======== 3:670 0:000 VideoCard devID=0x1268086 3:670 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE 3:670 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE 3:671 0:000 Found Airport BCM at 0x1C0002, 0x0 3:671 0:000 USBADR[1] = 0x1C0005 and PCIe = 0x0 3:671 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 3:671 0:000 first CPU found at 47B4 offset 47B7 3:671 0:000 score candidate at 47B0 3:671 0:000 score inserted in acpi_cpu_score _PR_ 3:671 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 within the score: _PR_ 3:671 0:000 Found PCIROOTUID = 0 3:671 0:000 Start Display0 Fix 3:672 0:000 builtin display 3:672 0:000 Creating DSM for Intel card 3:672 0:000 now inserting Video device 3:672 0:000 ... into existing bridge 3:672 0:000 patch Display #0 of Vendor=0x8086 in DSDT new way 3:672 0:000 OperationRegion (GNVS...) corrected to addr=0xACFBCE18 3:672 0:000 OperationRegion (OGNS...) corrected to addr=0xACFBA018 3:672 0:000 OperationRegion (MCHT...) corrected to addr=0xFED10000 3:672 0:000 indirect name=SRCB 3:672 0:000 OperationRegion (RCRB...) corrected to addr=0xFED1C000 3:672 0:000 OperationRegion (NVIA...) corrected to addr=0xE0101000 3:672 0:000 indirect name=ASLB 3:672 0:000 ... value not defined 3:672 0:000 OperationRegion (IGDM...) corrected to addr=0x0 3:672 0:000 OperationRegion (MDBG...) corrected to addr=0xACF6A018 3:672 0:000 ========= Auto patch DSDT Finished ======== 3:672 0:000 Drop tables from Xsdt, SIGN=SSDT TableID= Length=0 3:672 0:000 Xsdt has tables count=12 3:672 0:000 Table: SSDT H2O BIOS 4200 dropped 3:672 0:000 Table: SSDT Cpu0Ist 2052 dropped 3:672 0:000 Table: SSDT CpuPm 2454 dropped 3:672 0:000 corrected XSDT length=108 3:672 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success 3:679 0:006 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8 3:679 0:000 EdidDiscovered size=128 3:679 0:000 00 | 00 FF FF FF FF FF FF 00 30 E4 27 03 00 00 00 00 3:679 0:000 16 | 28 15 01 04 90 1F 11 78 0A 37 45 96 58 57 8E 28 3:679 0:000 32 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 3:679 0:000 48 | 01 01 01 01 01 01 58 1B 56 7E 50 00 0E 30 24 30 3:679 0:000 64 | 35 00 35 AE 10 00 00 19 DE 12 56 9A 50 00 1A 30 3:679 0:000 80 | 24 30 35 00 35 AE 10 00 00 19 00 00 00 FE 00 44 3:679 0:000 96 | 37 30 50 56 80 31 34 30 57 48 36 0A 00 00 00 00 3:679 0:000 112 | 00 00 41 31 94 01 00 00 00 01 01 0A 20 20 00 EC 3:679 0:000 Intel Intel HD Graphics 3000 [8086:0126] :: PciRoot(0x0)\Pci(0x2,0x0) 3:679 0:000 Intel GFX revision =0x9 3:679 0:000 USB Controller [8086:1C2D] :: PciRoot(0x0)\Pci(0x1A,0x0) 3:679 0:000 HDA Controller [8086:1C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => detected codec: 10EC:0269 3:679 0:000 LAN Controller [1969:1083] :: PciRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0) 3:679 0:000 USB Controller [104C:8241] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0) 3:679 0:000 USB Controller [8086:1C26] :: PciRoot(0x0)\Pci(0x1D,0x0) 3:679 0:000 stringlength = 2688 3:679 0:000 CurrentMode: Width=1024 Height=768 3:679 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: AA833718 3:679 0:000 3:685 0:005 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10 3:685 0:000 Extra kext: EFI\CLOVER\kexts\10.10\ACPIBacklight.kext 3:694 0:009 Extra kext: EFI\CLOVER\kexts\10.10\ACPIBatteryManager.kext 3:705 0:010 Extra kext: EFI\CLOVER\kexts\10.10\AtherosL1cEthernet.kext 3:707 0:002 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext 3:708 0:001 Extra kext: EFI\CLOVER\kexts\10.10\GenericUSBXHCI.kext 3:710 0:001 Extra kext: EFI\CLOVER\kexts\10.10\NullCPUPowerManagement.kext 3:718 0:008 Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext 3:721 0:003 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext 3:731 0:010 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext 3:733 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext 3:740 0:007 Removed efi-boot-device-data variable: Not Found 3:740 0:000 Custom boot screen not used because entry has unset use graphics 3:740 0:000 Closing log bootlog.log.txt Link to comment Share on other sites More sharing options...
intruder16 Posted April 13, 2015 Share Posted April 13, 2015 Use guid of volume you want to hide/disable. Easiest option is, while in Clover boot menu, select partition, press space, note guid. Tip: No need to note full guid, copy the last 5 chars, match them with guid's in bootlog. Post config.plist. Link to comment Share on other sites More sharing options...
jsgates Posted April 13, 2015 Author Share Posted April 13, 2015 Thanks for the assistance. I was able to get Windows 7 & Linux Mint custom entries to both show up in Clover and boot. Now I'm trying to get a Custom Entry for my Yosemite installation, but I can't seem to get that one working. The UUID/GUID is the same for Windows 7 & Mint installations since they are both getting booted from the EFI partition (they just have different boot files, bootmgfw-MS.efi & grubx64.efi). The UUID shown in Clover for the OS X installation is different. What boot file should I be using for it? I currently have it pointed to \EFI\APPLE\EXTENSIONS\Firmware.scap. I don't think this is correct though. Link to comment Share on other sites More sharing options...
jsgates Posted April 13, 2015 Author Share Posted April 13, 2015 Figured it out. For OS X I don't need to specify a boot file, only the UUID. Everything is working good now! Thanks again. 1 Link to comment Share on other sites More sharing options...
mrags54 Posted September 5, 2015 Share Posted September 5, 2015 I am unable to get this method for Hiding non-bootable Menu entries on Clover. ver 3259http://www.insanelym...-2#entry2029540 I have tried a number of methods. I followed this guide to add custom entries and I added UUIDs for partitions I want to hide (see Hide Partitions image) No Joy I continue to get the same set of drives on the Clover Bootloader screen. Here are my boot-log, config.plist and UUID list. I would appreciate any additional guidance. Attached Files Boot_Log_94_0200.rtf 20.16KB 0 downloads UIDs.txt 1.37KB 1 downloads config.txt 5.15KB 1 downloads Hide Volumes.tiff OSX partition.tiff Windows EFI on EFI.tiff Link to comment Share on other sites More sharing options...
BreBo Posted September 8, 2015 Share Posted September 8, 2015 I am unable to get this method for Hiding non-bootable Menu entries on Clover. ver 3259 I have tried a number of methods. I followed this guide to add custom entries and I added UUIDs for partitions I want to hide (see Hide Partitions image) In your config.plist change this: <key>Hide</key> <array> <string>989DAD9C-18D3-4099-9764-6C01CEE13E64</string> <string>57CF9A4B-4E2B-4198-BC44-7C448A86E656</string> <string>BD8673EF-8270-4F42-AD26-C283DAFD31B6</string> </array> Into this: <key>Hide</key> <array> <string>HD(1,GPT,989DAD9C-18D3-4099-9764-6C01CEE13E64,0x22,0x40000)</string> <string>HD(3,GPT,57CF9A4B-4E2B-4198-BC44-7C448A86E656,0x72800,0xE8CB5000)</string> <string>HD(4,GPT,BD8673EF-8270-4F42-AD26-C283DAFD31B6,0xE8D27800,0xE1000)</string> </array> Link to comment Share on other sites More sharing options...
Maniac10 Posted September 9, 2015 Share Posted September 9, 2015 There's something wrong there mrags54, I can see in your config.plist that you've got some custom entries, however the boot.log shows nothing about them but this: 1:359 0:000 Custom entries start 1:359 0:000 Custom entries finish So 2 things might be happening, either you uploaded a different config.plist or boot.log, or Clover is loading a config.plist other than the one you're editing. 0:104 0:004 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:104 0:000 EFI\CLOVER\config.plist loaded: Success EDIT: it's definitely a different plist, the one you uploaded have these kext patches: <key>KextsToPatch</key> <array> <dict> ... <key>Name</key> <string>VoodooHDA</string> ... </dict> <dict> <key>Comment</key> <string>External icons patch</string> ... <key>Name</key> <string>AppleAHCIPort</string> ... </dict> <dict> <key>Comment</key> <string>R9 display port connector</string> ... <key>Name</key> <string>ATI7000Controller</string> ... </dict> </array> But the log shows something else: 0:256 0:000 KextsToPatch: 3 requested 0:256 0:000 KextToPatch 0: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC892) Kext bin patch, data len: 4 0:256 0:000 KextToPatch 1: AppleHDA (t1-10.9-10.11-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6 0:256 0:000 KextToPatch 2: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8 Link to comment Share on other sites More sharing options...
Recommended Posts