Jump to content

(SOLVED) Asus Z87-Pro + Haswell i5-4590 = instant reboot even using KernelPM


bdv
 Share

1 post in this topic

Recommended Posts

I am trying to install Mavericks (10.9.4 installer) on a brand new Asus Z87-Pro (V Edition) using Clover UEFI

 

Clover boots, load kexts (FakeSMC), patch kernel and reboots just after patching kernel.

 

 

Mobo: Asus Z87-Pro, latest bios (2103)

Proc: Core i5-4590

Graphic: GTX650 (with UEFI VBios GOP), runs OK on other UEFI Asus mobo

Ram: 2x8GB Crucial 1600 (run ok on other mobo)

Clover : r3193, UEFI mode, also tried with legacy mode : same instant reboot

 

Bios settings: as usual for Asus (I installed Z77, Z87M, Z87-WS, X79-WS, P8B-WS, P8C-WS, etc)

AHCI, No Memory Remap, no VT-d, IGPU deactivated, CSM disabled and "Other OS" (for UEFI boot).

The only new setting for this board is MSR 0x02 Lock : disabled or enabled. Set as disabled (default), also tried Enabled just in case : same instant reboot.

 

Clover settings: KernelPM + AsusCPUPM (tried also disabled)

 

With this release of Clover, I think that Haswell instant reboot bug should be cured by KernelPM ?

 

I also tried with a Yosemite Installer, even with myHack/Chameleon and legacy bios settings

 

Tried combination of npci=0x2000 or 0x3000, -xcpm (normally only for IvyBridge), samme reboot.

 

Any idea?

 

Solved by downgrading bios to 1802 release, it boots directly to the installer with the same settings.

 

Link to comment
Share on other sites

 Share

×
×
  • Create New...