Jump to content
Sign in to follow this  
Followers 0
zhangtemplar

[Success] 10.9.1 on HP z800

1 post in this topic

Recommended Posts

I have successfully installed Mavericks (10.9.1) to my HP Z800.

Specification

  1. 2x Intel Xeon E5520 @ 2.26GHz Four Cores Eight Threads;
  2. 96 GB 1066 MHZ ECC DDR3;
  3. Nvidia GTX 760;
  4. Intel Rapid raid storage;
  5. LSI SAS controller;
  6. 1×128 GB SSD and 4x2TB HDD;

Procedure

  1. Get your Mavericks 10.9.1. This is must, after 10.9.1 the support to LSI SAS controller is removed;
  2. On your Mac, use myHack (you can get it http://myhack.sojugarden.com/guide/) to create a USB installer, for which you will need at 8GB stick;
  3. Change hardware settings of HP Z800 to make all your SSD and HDD connected to SAS port instead of SATA port (which won’t be recognized). Remove unnecessary component from HP Z800.
  4. Change the bios setting of HP Z800 to disable vt-d and make sure booting from LSI is enabled (press ctrl+c during booting to access LSI interface);
  5. Insert your USB installer to HP Z800 and use following boot flag “GraphicsEnabler=no PCIRootUID=0 -v -f”. The first two flags we used for the GTX 760 graphic card and “-f” disable kernel cache;
  6. Follow the install instruction of the Apple. Approaching to completion, myHack will indicate you to remove some kexts, press “yes” to all of them;
  7. After installation is completed, remove the USB installer from HP Z800;
  8. Boot HP Z800 to the Mavericks just installed and follow all the instruction;
  9. In your system, change boot flag in /Extra/org.chameleon.Boot.plist

Benchmark

Screen-Shot-2015-03-21-at-11.05.55-PM.pn

Screen-Shot-2015-03-21-at-11.11.37-PM.pn

Screen-Shot-2015-03-21-at-11.11.43-PM.pn

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      -Install, check here 
      http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/
       
      -Clover Folder 
      CLOVER.zip
       
      -DSDT 
      DSDT.MaLd0n Supermicro X10DAI.zip
       
      -DSDT Patches 
      -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN #1 -LAN #2 -SPSR -WIFI -EC -PNLF -HDMI -NVME -Geekbench 

       
      -SS 


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, MMido and many, many, many others!   We're all here to have fun and learn from each other!  
    • By Grim Reaper
      Anyone know if OSX can be installed on this? I have searched for information about installing OSX on it and found nothing. 
       
      I just got an HP ENVY Phoenix 860-019 desktop for a very low price, $100 CDN without any hard drives or add-on graphics card. It has an I7-6700 3.4GHz processor, integrated Intel graphics 530, 16GB DDR4 memory. It has only two PCIE expansion slots, one PCIE 16 for a graphics card and a PCIE 1x. It is now running Windows 10 on a 3TB drive. I have an old Radeon HD6450 which will operate with it with the bios set to legacy boot (it won't with the bios set to secure boot).
       
      Any information about installing OSX Mojave on this computer is very much appreciated.
    • By grisno
      macOS driver installer for laptop HP Pavilion G6-2209SS with support for dual boot Bootloader. Maybe it can be installed on other HP Pavillion G6 series laptops, but in some cases additional fixes will have to be made.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      CPU : OK Intel Core i3-2370M AUDIO : OK IDT 92HD87B2/4 (111d:76d9) Layer 3 & 12 (Speakers+Hearphones+LineIn+MicInt w/NoiseFilter+MicExt+HDMI) VIDEO : OK Intel HD Graphics 3000 (8086:0116) (LVDS + HDMI A/V + VGA) (VGA MacOS < 10.8.2) MEMORY : OK Intel 2nd Generation Core Proccesor DRAM Controller (8086:0104) (Dual Channel DDR3 Up To 16GB) SATA : OK Intel 7 Series Chipset Family SATA Controller (8086:1e03) (ACHI Mode) DVD : OK (Read & Write) USB 2.0 : OK Intel 7/C216 Chipset Family USB Enhaced Host Controller (8086:1e26 & 8086:1e2d) USB 3.0 : OK Intel 7/C216 Chipset Family USB xHCI Host Controller (08086:1e31) WEBCAM : OK HP TrueVision HD (SuYin) (064e:e263) [USB 2.0] KEYBOARD : OK PS/2 TRACKPAD : OK PS/2 Synaptics LAN : OK Realtek RTL8501E Fast/Gigabyte Ethernet Controller PCI Express (10ec:103c) * AIRPORT : KO MediaTek RT3290 PCI Express (1814:3290) (Not Supported) BLUETOOTH : KO MediaTek RT3290 PCI Express (1814:3298) (Not Supported) CREADER : OK Realtek RTS5229 PCI Express (10ec:5229) (10.12.5+) *** ACPI BAT : OK (Chameleon & Clover) ACPI PWR : OK (Chameleon & Clover) ACPI RST : OK (Chameleon & Clover) ACPI SLP : OK (Chameleon & Clover) ** ACPI WAK : OK (Chameleon & Clover) ** HIBERNATE : OK (Only Clover Bootloader w/Hibernatemode: 0, 21 & 29) IMESSAGE : OK (Chameleon & Clover) FACETIME : OK (Chameleon & Clover) ICLOUD : OK (Chameleon & Clover) APPSTORE : OK (Chameleon & Clover) ITUNES : OK (A/V DRM Content & Sync iPod/iPhone) SIRI : OK CMOS : OK RTC : OK LPC : OK Intel HM76 Express LPC Controller (8086:1e44) SMBUS : OK Intel 7/C216 Chipset Family SMBus Controller (8086:1e22) IMEI : OK Intel 7/C216 Chipset Family MEI Controller (8086:131a) GPT PART. : OK (Chameleon & Clover) (10.13+ APFS Not Tested) MBR PART. : Not Tested   Known Issues:
       
      - AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT. *
      - AppleRTL8169Ethernet: only work to 10Mbits. *
      - You can't wake up the system when the laptop uses the battery and the system disk is a USB hard drive. **
      - You can't wake up the system from PS/2 Keyboard/Trackpad. **
      - The Wifi MediaTek RT3290 (1814:3290) device are not supported.
      - The Bluetooth MediaTek RT3290 (1814:3298) device are not supported.
      - The PCIe CardReader Realtek RTS5229 (10ec:5229) device are not supported. *** (10.12.5-)
      - Stop working when sleep with inserted card. *** (10.12.5+)
      - Chameleon Bootloader Not Work Properly With macOS Mojave
       
      Coming soon:
       
      - Installer: Create unified installer for all Mac OS versions
      - Manual: How To Install Wifi Card Blacklisted In HP UEFI BIOS
      - Manual: How To Install OSX Without Destroying Windows 8.x Partition
      - Driver: VirtualSMC Support
    • By grisno
      Hi people,
       
      This is a preliminary MacOS driver installer for laptop HP Pavilion 15-D002SS with support for dual boot Bootloader. Maybe it can be installed on other HP Pavillion 15 series laptops, but in some cases additional fixes will have to be made.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      CPU : OK Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz AUDIO : OK Realtek ALC282 (10ec:0282) Layer 1 & 3 (Speakers+Hearphones+MicInt[w/NoiseFilter]+HDMI) VIDEO : OK Intel HD Graphics 4000 (8086:0166) (LVDS + HDMI A/V) MEMORY : OK Intel Corp. 3rd Gen Core processor DRAM Controller (8086:0154) (Dual Channel DDR3 Up To 16GB) SATA : OK Intel Corp. 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (8086:1e03) DVD : OK HP DVDRAM GU90N (Read & Write) USB 2.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (8086:1e26) USB 2.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (8086:1e2d) USB 3.0 : OK Intel Corp. 7 Series/C210 Series Chipset Family USB xHCI Host Controller (08086:1e31) WEBCAM : OK HP TrueVision HD USB 2.0 UVC KEYBOARD : OK PS/2 TRACKPAD : OK PS/2 Synaptics LAN : OK Realtek RTL8101E PCI Express Fast Ethernet controller (10ec:8136) AIRPORT : OK Atheros QCWB335 (AR9565) PCI Express (168c:0036) (10.10.0+) ** BLUETOOTH : OK Atheros AR3012 USB 2.0 (0cf3:3121) (10.11.x+) *** CREADER : OK Realtek RTS5229 PCI Express (10ec:5229) (10.12.5+) **** ACPI BAT : OK (Chameleon & Clover)ACPI PWR : OK (Chameleon & Clover) ACPI RST : OK (Chameleon & Clover)ACPI SLP : OK (Chameleon & Clover) * ACPI WAK : OK (Chameleon & Clover) *ACPI FAN : KO (Chameleon & Clover) * HIBERNATE : OK (Only Clover Bootloader w/Hibernatemode: 0, 21 & 29) ***** IMESSAGE : OK (Chameleon & Clover)FACETIME : OK (Chameleon & Clover) ICLOUD : OK (Chameleon & Clover)APPSTORE : OK (Chameleon & Clover) ITUNES : OK (A/V DRM Content & Sync iPod/iPhone) SIRI : OK CMOS : OK RTC : OK LPC : OK Intel Corp. HM76 Express Chipset LPC Controller (8086:1e59) SMBUS : OK Intel Corp. 7 Series/C210 Series Chipset Family SMBus Controller (8086:1e22) IMEI : OK Intel Corp. 7 Series/C210 Series Chipset Family MEI Controller (8086:1e3a) GPT PART. : OK Chameleon & Clover) (10.13+ APFS Not Tested) MBR PART. : Not Tested   Known Issues:
       
      - Can't wake up the system when the laptop uses the battery and the system disk is a USB hard drive *
      - Can't wake up the system from PS/2 Keyboard/Trackpad *
      - Partial support with a maximum speed of 10Mbits (10.11.0+) **
      - Don't support the poweroff/on by software (10.10.0+) ***
      - WID driver with incomplete powermanager support (10.12.5+) ****
      - Stop working after wakeup from sleep with inserted SDCard (10.12.5+) ****
      - Don't work properly hibernatemode 21 & 29 (10.12.0+) *****
       
      Coming Soon:
       
      - Support ACPI FAN RPM
      - Create unified installer for all Mac OS versions
      - macOS Mojave Support
×