Jump to content
assassinXsoul

:FIX/GUIDE: AMD Stuck At Grey/White Screen With Spinning Beachball

4 posts in this topic

Recommended Posts

this will solve you beach ball spinning infinite grey/white screen {censored} ok i got this working the procedure is as follows on two different boards

asus m5a97 evo r2.0

gigabyte 990fxa-ud3

and two different graphics cards

gigabyte ati hd 79870 2gb

xfx hd5770

my processor is a amd fx 8350
32gb ddr3 gskill ram

I AM ALSO USING GPT

i can now easily play might and magic x legacy on full graphics settings

ok i used a certain kernel and the stock graphics drivers if you wish to change that it may or may not work

ok procedure you now need to have kext wizard handy

you need to head over to here for the AMD kernel

http://www.insanelym...ttach_id=157955

inside that file is the kernel and the system.kext

now you need to go over to here to grab the other two kext IOPCIFamily.kext + AppleACPIPlatform.kext for yosemite

http://www.insanelym...t-for-yosemite/


you will also need amd webkit patch

http://www.insanelym...ttach_id=154087

now i want you to place all kext on the desktop
if you have backed up your graphics drivers during or after the install you should be able to boot with just

npci=0x2000 PCIRootUID=1 -v

if not you will also need to add

-f -x

now once you are at your desktop you need to move the kernel over to System/Library/Kernels
so rename your original kernel to kernel.backup1 then overwrite it with the new one

you will then open up kext wizard and use the install pane to install

system.kext
IOPCIFamily.kext
AppleACPIPlatform.kext
(also if you backed up your graphics drivers nows the time to reinstall them)

then i want you to keep kext wizard open and install the amd webkit patch after installation has finished go back to kext wizard and repair permissions (click both boxes on the bottom half)

then reboot some of you still may have to use -v and -f

i have mine booting with full acceleration
without -f -v

 

 

 

 

 

enjoy smile.png

  •  

Share this post


Link to post
Share on other sites
Advertisement

thank you for the wonderful hack, it worked on chameleon, but when i switch to clover System.kext conflict with the old one.

on clover boot it displays:

 

"Refusing new kext com.apple.kpi.xxx v.14.1 (the one in the new system.kext); already loaded v.14.0"

 

then i got beachball of the death.

how did clover load the old kext when the new kext already loaded?

 

Share this post


Link to post
Share on other sites

Awesome, I have been at this for days and this helped me get it booting without having to enter anything at startup. Now just to get internet working :/

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       
       

       
      **FOR**  GIGABYTE Z390 AORUS PRO
       

       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
       
      and many more....
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
       
       
      WORKING
       
      • Sound 
      • HDMI audio on RX580
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       
       
       

       

       

       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • Aorus Z390 Pro EFI .zip
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder, explained in guide)
       
      • OsxAptioFix2Drv-free2000.efi ( Replace AptioMemoryFix-64.efi post install )
       
       
      OPTIONAL DOWNLOADS
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
       
      PART 2 - BIOS SETTINGS (version F5 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Disabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 64M
      • Chipset → DVMT Total Gfx Mem → 256M
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Enabled
       
      • Power → ErP → Disabled
      • Power → RC6 (Render Standby) → Enabled
       
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customize button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with the customised AORUS Z390 configuration ( Video below )
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
      NOTE
      During install the system will reboot and you will see onscreen message EXC_CORPSE_NOTIFY exception. This instance is normal,  no skeletons !.
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install Prebooter from Preboot
       
       
       
      After next restart choose:
       
      • Boot macOS from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, Aorus Pro can only boot with the aid of the Mojave USB Installer.
      To boot from the internal drive, copy Clover EFI folder from  Mojave USB installer into the  Internal EFI drive.
       
      • Using ESP Mounter Pro, mount internal EFI/ESP partition and external USB EFI/ESP
      • Copy contents from USB EFI/ESP partition and paste into internal EFI/ESP
       
       
      Video:
       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      Configure Config.plist for iMessages. ( Video below )
       
      • SMBIOS = Mac Mini 8.1
      • Rt Variables —> ROM —> is your MAC address (delete colons from Mac address)
      • MLB field =  Enter serial number generated and append 5 random characters
      • SmUUID = in Terminal run command “uuidgen” and copy it to SmUUID field
      • Board Serial is same as MLB field.
      • Clover Configurator —>  Save 
       
      Video:
       
       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Delete AptoMemoryFix-64.efi
      • Place both EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   --------------- 
       
       
       
       
       
       
      OPTIONAL:  Enable HDMI Audio on RX580
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       
       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
       
      DEFAULT SSDT USB FIX IN AORUS Z390 PRO EFI FOLDER  –  default SSDT ports configuration below - SSDT already inside Aorus Z390 EFI folder 
       

       

       

       
       
      Limitation: USB2 devices can not be used on SS03 → SS08
       
       
       
       
       
       
      FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER .....   THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?p=77102#p77102
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By Chaznex
      Ciao ragazzi, sono alle prime armi e vorrei provare MacOS sul mio HP Pavilion 15-cb006nl. Potreste darmi una mano? Non so proprio da dove iniziare.
      Specifiche:
      CPU   Intel Core i7 7700HQ @ 2.80GHz   Kaby Lake 14nm Technology
      RAM   16GB Dual-Channel
      Motherboard   HP 836B (U3E1)
      Graphics   Generic PnP Monitor (1920x1080@60Hz)   Intel HD Graphics 630 (HP)  Nvidia GeForce GTX 1050   SLI Disabled
      Storage   1TB HDD + 128GB SSD
      Audio   Realtek HD Audio
      Keyboard   standard PS/2 HPQ
      ELAN Clickpad   ETD
      Network   Intel Dual Band Wireless-AC 7265
    • By AllIsDust
      Salve, vorrei fare un Hackintosh come da titolo, solo che avendo poco budget volevo chiedere se la mia attuale postazione fosse buona e ci fossero componenti compatibili per mac:
      i5 4590
      h97 pro4
      amd r9 280x
      ram 2x4 1600
      alu 620w
       
      Se non erro però la gru non dovrebbe esserlo dato che è amd. Grazie in anticipo
    • By Mtkhan
      Hello Guys!

      I'm trying to upgrade my Mackintosh by installing Mojave on my Previous build of HP Z400 running perfectly with Sierra.
       
      I'm stuck at this error saying "macOS could not be installed on your computer"
      I've added the same kexts as before in my previous builds and I'm not sure why its also not showing my drives in Disk Utility. I'm thinking the error could be of because this, please let me know If I'm wrong. I'm attacking the screenshots please see these; also I'm adding my plist file its been setup using enoch bootloader. I was using kexts "AHCIPortInjector.kext" & "IOAHCIBlockStorageInjector.kext" in my previous builds. But not sure if its working or not? as my usb is working either using these or without. Using SmBIOS of Mac Pro 5.1 and its working fine in previous builds.

      Please help me figuring this issue and suggest the solution for this error? I want to get this figured as soon as possible. 
       
       
      Many thanks in advance!
       
       
       



×