Jump to content
Sign in to follow this  
Followers 0
hanyuumination

i3-2125 + asus p8p67

2 posts in this topic

Recommended Posts

Доброго времени суток.

Прокопавшись некоторое время с установкой хакинтоша на phenom 2 x4 b45 + ga-870a-ud3 решил пересесть на интел.

Итого, на настоящий момент сборка примерно такая:

Intel Core i3-2125

Asus P8P67 DeLuxe

Память представлена тремя планками 4+2+2ГБ, двухгигабайтные планки стоят в слотах одного цвета.

AMD Radeon HD7850 1GB Sapphire

Kingmax SSD 60GB

Собственно, требуется OS X 10.7.5+ на данном железе. Находил разные гайды на разных ресурсах и следовал им, в итоге все выливалось kernel panic с ошибкой "can't perform kext scan: no kext summary" и завершающей строкой system uptime in nanoseconds: %%от нуля до любого рандомного значения%%

Пробовал как сборки osx86, которые по сути просто разворачиваются на флешку, использовал различные бутлодеры, от хамелеона до ящика пандоры.

Бутфлаги использовал тоже в разных комбинациях, на постоянной основе включал флаги -f и -x.

Биос стоит последний, насколько я понимаю, откат его до предыдущих невозможен (в одном из гайдов сообщалось, что стабильная работа возможна на версиях 2ххх, однако у меня версия 3ххх). HPET включен, VT-x отключен, разгона нет.

Возможен ли стабильный хакинтош в такой системе?

Могут ли мешать загрузке графического установщика установленные PCI аудиокарта и PCI-e WLAN адаптер?

Заранее спасибо.

 

Share this post


Link to post
Share on other sites
Advertisement

Нет, загрузке графического установщика лишние карты не мешают.

Конфигурация хорошая, Хакинтош должен работать. 

Паника потому что "использовал различные бутлодеры, от хамелеона до ящика пандоры". Я так понимаю, что в любом из этих вариантов стоит Хамелеон или Химера.

Когда-нибудь слышали про бутлоадер "Кловер"?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JRevenge
      Ciao ragazzi,
      alla fine sono riuscito a risolvere il problema che riscontravo qualche mese fa, dopo l'ottima EFI sistemata da @gengik84 e l'ho risolto rimuovendo dart=0 che creava kernel panic e problemi quando la batteria scendeva sotto ad un livello di batteria basso. Adesso il sistema non crea più problemi di kernel panic, ma volevo chiedervi se allo stato attuale secondo voi c'è qualcos'altro da ottimizzare.
       
      Vi allego la EFI.
       
      Grazie anticipatamente.
      CLOVER.zip
    • By TheAngryYeti
      So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall.
       
      I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation.
       
      I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it.
       
      Thinking i was a-ok, i decided to reboot, just to make sure all was well.
       
      After about 1min, i lose display.
       
      I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again.
       
      I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display.
       
      Im attaching a screenshot of Verbose mode right before i lose display.
       
      I would greatly appreciate any help to get back into it or at least help getting it re-installed!!
       
      -Sin

    • By TheAngryYeti
      First, my build:
       
      Asus ROG Strix H370-I mobo
      i5 8400 cpu
      32gb ddr 4 2133
      1tb samsung evo 860 ssd
       
      Ive finally gotten to the point where the installation of HS loads to the language selection screen, but then i lose all usage of every USB port.
       
      Im at a loss of what to do from here.
       
      According to others, i have the proper files in the kexts/other folder as well as the drivers64UEFI folder.
       
      Does anyone have any suggestions as to what i can do? Im getting kinda desperate as ive been at it for a week now and this is as far as ive gotten.
       
      -Sin
       
       
    • By TheAngryYeti
      So I FINALLY got my High Sierra thumb drive to boot and once I got to the language selection screen, I noticed I lost all connectivity to my keyboard and mouse.
       
      i tried plugging in both into all of my USB ports (2.0, 3.0, 3.1) to no avail.
       
      i made sure I had the latest USBInject kext and XHCI-Unsupported kext in the Other folder.
       
      i also noticed whilst troubleshooting, the thumb drive will ONLY boot using Verbose and plugged into one of the 2 3.1 ports.
       
      does anyone have ANY suggestions?? I’ve been struggling for a week now on this!!
       
      thanks in advance
       
      -Sin
       
      Build: Asus ROG Strix H370-I, i5 8400, 32Gb ddr 4 2133, 1Tb Samsung EVO 860 ssd
    • By PixelLover
      I'm in the middle of my first hackintosh (High Sierra) on my ZenBook Pro UX501VW-US71 laptop using the Vanilla Install. I've tried using different config.plst files and I've gotten the furthest with RehabMan's own (linked here). It hangs at error message IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.   Can anyone help me figure out what changes to make to the config.plst file for my specific laptop (which is where I assume the problem lies)   System Specs: Intel Skylake Core i7­-6700HQ 2.6 GHz Quad­core
      Intel® HD Graphics 530 Nvidia GTX 960M 2G 15.6" Touch IPS 4K Ultra­-HD display, 3840 x 2160 resolution   Kexts: AppleALC.kext FakeSMC.kext Lilu.kext USBInjectAll.kext WhateverGreen.kext  
×