First I want to inform that all credits for tools and usability go to: Pike R. Alpha
If they have problems with some .kext inform here: GitHub Piker-Alpha (Pike) Source v2.4 How to use it:
Download Xcode, and compile with it.
Open Terminal and type: cd /Library/Developer/Xcode/DerivedData/AppleIntelInfo-*/Build/Products/Debug Load it: sudo kextload AppleIntelInfo.kext Do some tests, e.g: Watch a video in Youtube in 1080p, run Geekbench, etc...
After that, cancel the .kext process: sudo kextunload AppleIntelInfo.kext And now, to check the results, run this command: sudo cat /tmp/AppleIntelInfo.dat You'll see the output like this: AppleIntelInfo.kext v1.9 Copyright © 2012-2016 Pike R. Alpha. All rights reserved Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 1 logCStates...............................: 1 logIPGStyle..............................: 1 Warning: Clover hw.busfrequency error detected : 17d78400 InitialTSC...............................: 0x44346f26290 (187 MHz) MWAIT C-States...........................: 135456 Processor Brandstring....................:        Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz Processor Signature..................... : 0x306A9 ------------------------------------------  - Family............................... : 6  - Stepping............................. : 9  - Model................................ : 0x3A (58) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35)  : 0x0 ------------------------------------------  - Core Count........................... : 2  - Thread Count......................... : 4 MSR_PLATFORM_INFO................(0xCE)  : 0x80C10E0011900 ------------------------------------------  - Maximum Non-Turbo Ratio.............. : 0x19 (2500 MHz)  - Ratio Limit for Turbo Mode........... : 0 (not programmable)  - TDP Limit for Turbo Mode............. : 1 (programmable)  - Low Power Mode Support............... : 0 (LMP not supported)  - Number of ConfigTDP Levels........... : 0 (only base TDP level available)  - Maximum Efficiency Ratio............. : 12  - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008404 ------------------------------------------  - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)  - CFG Lock............................. : 1 (MSR locked until next reset)  - C3 State Auto Demotion............... : 1 (enabled)  - C1 State Auto Demotion............... : 1 (enabled)  - C3 State Undemotion.................. : 1 (enabled)  - C1 State Undemotion.................. : 1 (enabled)  - Package C-State Auto Demotion........ : 0 (disabled/unsupported)  - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x20414 ------------------------------------------  - LVL_2 Base Address................... : 0x414  - C-state Range........................ : 2 (C7 is the max C-State to include) IA32_MPERF.......................(0xE7)  : 0xD9B3C8E451 IA32_APERF.......................(0xE8)  : 0xD76551A23F MSR_FLEX_RATIO...................(0x194) : 0x100000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x21C900001D00 ------------------------------------------  - Current Performance State Value...... : 0x1D00 (2900 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x1D00 ------------------------------------------  - Target performance State Value....... : 0x1D00 (2900 MHz)  - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x8 IA32_THERM_STATUS................(0x19C) : 0x88350008 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------  - Fast-Strings......................... : 1 (enabled)  - Automatic Thermal Control Circuit.... : 1 (enabled)  - Performance Monitoring............... : 1 (available)  - Processor Event Based Sampling....... : 0 (PEBS supported)  - Enhanced Intel SpeedStep Technology.. : 1 (enabled)  - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)  - CFG Lock............................. : 0 (MSR not locked) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x691200 ------------------------------------------  - Turbo Attenuation Units.............. : 0   - Temperature Target................... : 105  - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001 ------------------------------------------  - EIST Hardware Coordination........... : 1 (hardware coordination disabled)  - Energy/Performance Bias support...... : 1  - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)  - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1D1D1D1F ------------------------------------------  - Maximum Ratio Limit for C01.......... : 1F (3100 MHz)   - Maximum Ratio Limit for C02.......... : 1D (2900 MHz)  IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x4 ------------------------------------------ MSR_POWER_CTL....................(0x1FC) : 0x14005F ------------------------------------------  - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA1003 ------------------------------------------  - Power Units.......................... : 3 (1/8 Watt)  - Energy Status Units.................. : 16 (15.3 micro-Joules)  - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x8000815E00DC8118 ------------------------------------------  - Package Power Limit #1............... : 35 Watt  - Enable Power Limit #1................ : 1 (enabled)  - Package Clamping Limitation #1....... : 0 (disabled)  - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)  - Package Power Limit #2............... : 43 Watt  - Enable Power Limit #2................ : 1 (enabled)  - Package Clamping Limitation #2....... : 0 (disabled)  - Time Window for Power Limit #2....... : 0 (2 milli-Seconds)  - Lock................................. : 1 (MSR locked until next reset) MSR_PKG_ENERGY_STATUS............(0x611) : 0x22C9A00A ------------------------------------------  - Total Energy Consumed................ : 8905 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x10000000C00118 ------------------------------------------  - Thermal Spec Power................... : 35 Watt  - Minimum Power........................ : 0  - Maximum Power........................ : 0  - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x135DE075 ------------------------------------------  - Total Energy Consumed................ : 4957 Joules (Watt = Joules / seconds) MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_PP1_CURRENT_CONFIG...........(0x602) : 0x1814149480000190 MSR_PP1_POWER_LIMIT..............(0x640) : 0x0 MSR_PP1_ENERGY_STATUS............(0x641) : 0x593CD2 ------------------------------------------  - Total Energy Consumed................ : 89 Joules (Watt = Joules / seconds) MSR_PP1_POLICY...................(0x642) : 0x10 ------------------------------------------  - Priority Level....................... : 16 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x19 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xC0000000000000 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xC0000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x883B MSR_PKGC6_IRTL...................(0x60b) : 0x8850 MSR_PKGC7_IRTL...................(0x60c) : 0x8857 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x240109E550 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xB22C5C10 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x22B90F113B MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x27135115870 IA32_TSC_DEADLINE................(0x6E0) : 0x443572AC506 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 25 (2500 MHz) Maximum Turbo Ratio/Frequency............: 31 (3100 MHz) IGPU Info: ------------------------------------------ IGPU Current Frequency...................:  350 MHz IGPU Minimum Frequency...................:  350 MHz IGPU Maximum Non-Turbo Frequency.........:  650 MHz IGPU Maximum Turbo Frequency.............: 1100 MHz IGPU Maximum limit.......................: No Limit P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 23 29 ] iGPU P-States [ (7) ] CPU C3-Cores [ 1 2 3 ] CPU C6-Cores [ 0 1 2 3 ] CPU C7-Cores [ 0 1 2 3 ] CPU P-States [ (12) 17 23 29 ] iGPU P-States [ (7) ] CPU C3-Cores [ 0 1 2 3 ] CPU P-States [ 12 17 23 27 (29) ] iGPU P-States [ (7) ] CPU P-States [ 12 17 23 27 (29) 30 ] iGPU P-States [ (7) ] CPU P-States [ (12) 17 19 23 27 29 30 ] iGPU P-States [ (7) ] CPU P-States [ 12 17 19 23 25 27 (29) 30 ] iGPU P-States [ (7) ] CPU P-States [ (12) 17 18 19 23 25 27 29 30 ] iGPU P-States [ (7) ] CPU P-States [ 12 17 18 19 (22) 23 24 25 27 29 30 ] iGPU P-States [ (7) ] CPU P-States [ 12 17 18 19 20 (22) 23 24 25 27 29 30 ] iGPU P-States [ (7) ] CPU P-States [ 12 17 18 19 20 (22) 23 24 25 27 29 30 ] iGPU P-States [ 7 (10) ] CPU P-States [ (12) 17 18 19 20 21 22 23 24 25 27 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ (12) 14 17 18 19 20 21 22 23 24 25 27 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ (12) 14 16 17 18 19 20 21 22 23 24 25 27 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 25 27 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 25 27 28 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ 12 14 15 16 17 18 19 20 21 (22) 23 24 25 26 27 28 29 30 ] iGPU P-States [ (7) 10 ] CPU P-States [ 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (31) ] iGPU P-States [ (7) 10 ] PS: If you want you can use Intel® Power Gadget.app too. If you have the wrong results with Intel Power Gadget + Skylake CPUs, Patrick Konsor one of the Development Team, says that it's a issue with the old version of this app, so for you fix that, go to Intel Power Gadget page and download the newest version. See what he says here Note: Where I put "youuser", enter your User name.