Jump to content
Mieze

IntelMausiEthernet.kext for Intel onboard LAN

952 posts in this topic

Recommended Posts

I have compiled IntelMausiEthernet.kext from Github Resources with XCODE version 11.2.1 with success in Catalina 10.15.2 Beta 2

My Intel I219V2 from Gigabyte Z170X Gaming 7 is working properly, sleep and wake without problem (with ethernet cable attached).

And just for the information, i always use Wifi for daily usage. i just tried new version and give feedback for dev.

Thanks very much

 

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
Advertisement
On 11/16/2019 at 11:24 PM, Andres ZeroCross said:

I have compiled IntelMausiEthernet.kext from Github Resources with XCODE version 11.2.1 with success in Catalina 10.15.2 Beta 2

My Intel I219V2 from Gigabyte Z170X Gaming 7 is working properly, sleep and wake without problem (with ethernet cable attached).

And just for the information, i always use Wifi for daily usage. i just tried new version and give feedback for dev.

Thanks very much

Screen Shot 2019-11-17 at 11.18.18.png

 

HI, Can you please add support for I350 onboard lan?  (0x15218086 )

here is the key from AppleIGP.kext, as you may already now, It's unstable with kernal panics... but when it does not panic, it works well.

 

 

 

<key>i350</key>
        <dict>
            <key>CFBundleIdentifier</key>
            <string>com.insanelymac.driver.AppleIGB</string>
            <key>IOClass</key>
            <string>AppleIGB</string>
            <key>IOPCIMatch</key>
            <string>0x15218086 0x15228086 0x15238086 0x15248086 0x15468086</string>
            <key>IOProviderClass</key>
            <string>IOPCIDevice</string>
            <key>NETIF_F_TSO</key>
            <true/>
        </dict>

Share this post


Link to post
Share on other sites
On 10/2/2019 at 4:07 PM, Evgeny2256 said:

Hello!
Please, help
I have a motherboard X8DTH with ethernet controller INTEL 82576.  I downloaded the kext from the first page, but the network interface still does not work. Please tell me what to do. I used kext utility for installation 

Please, help

 

Hi. Smalltreexxxxx.kext will support your MB. On Mojave and Catalina. I know , I have the same Nic on my X8DTi

Share this post


Link to post
Share on other sites
On 4/8/2018 at 4:06 PM, liuhongxin1993 said:

Supported devices for SmallTreeIntel8254x.kext:

  • 8086:107c 82541PI Gigabit Ethernet Controller

 

unfortunately not true. i have that card and it doesn't work at all.

Share this post


Link to post
Share on other sites
14 minutes ago, Mieze said:

@maleorderbride I'm sorry but there is none. IntelMausiEthernet was designed exclusively for PCH's integrated LAN solution.

 

Mieze

Thanks for the quick response Mieze (and all of your work around here). Is your RTL8111 also only for integrated LAN's?

 

Or would it work with a card like this? https://www.newegg.com/syba-sd-pex24009/p/N82E16833328018?Description=RTL8111&cm_re=RTL8111-_-33-328-018-_-Product&quicklink=true

Edited by maleorderbride

Share this post


Link to post
Share on other sites
26 minutes ago, maleorderbride said:

Is your RTL8111 also only for integrated LAN's?

 

Or would it work with a card like this? https://www.newegg.com/syba-sd-pex24009/p/N82E16833328018?Description=RTL8111&cm_re=RTL8111-_-33-328-018-_-Product&quicklink=true

It works well with any RTL8111 add-on card but you should avoid cards based on the outdated RTL8111B as this chip doesn't support offload features for IPv6 and is junk silicon due to several hardware bugs. Personally I'm using an RTL8111E-based card for testing.

 

Unfortunately your product link doesn't mention the exact chip used on the card.

 

Mieze

Share this post


Link to post
Share on other sites
On 1/31/2020 at 9:49 PM, maleorderbride said:

See reviews

Quote

Cons: not a realtek RTL8111 chipset (its an Agere ET-1310)
wont obtain IP via DHCP seems to work if I manually config IP (all other computers grab DHCP ip's fine)

 

Share this post


Link to post
Share on other sites
Posted (edited)
25 minutes ago, MacXZ said:

Can support intel X722 network(x710 series)?

https://downloadcenter.intel.com/product/139349/Intel-Ethernet-Network-Adapter-X722-Series

Only linux and windows driver be provided.

 

I try to learn driver development on mac os, but I think I need learn more about IOKit.

you have to learn i/o kit if you want to make a driver, i/o kit is the only way of comunicating with the os and having access to all the features you need to make driver, for example only using i/o kit you can have access to the allocation of dma buffers

Edited by ITzTravelInTime

Share this post


Link to post
Share on other sites
4 hours ago, ITzTravelInTime said:

you have to learn i/o kit if you want to make a driver, i/o kit is the only way of comunicating with the os and having access to all the features you need to make driver, for example only using i/o kit you can have access to the allocation of dma buffers

Thx for ur reply.

Can u recommend some books or site to learn I/O kit?

 

Would X722 series be supported by intelmausiethernet.kext in the future?

 

Thx again!

Share this post


Link to post
Share on other sites
5 hours ago, MacXZ said:

Would X722 series be supported by intelmausiethernet.kext in the future?

 

No, because it's a completely different architecture. Sorry!

 

Mieze :cat:

Share this post


Link to post
Share on other sites
On 4/18/2020 at 8:25 PM, Mieze said:

 

No, because it's a completely different architecture. Sorry!

 

Mieze :cat:

 

All right.

I have try to learn something from intelmausiethernet project, it beyond my head now.

 

Can u give me some advice to learn i/okit? 

Thx again.

Share this post


Link to post
Share on other sites
Posted (edited)
21 minutes ago, MacXZ said:

 

All right.

I have try to learn something from intelmausiethernet project, it beyond my head now.

 

Can u give me some advice to learn i/okit? 

Thx again.

 

I strongly reccommend you to have a strong c and c++ blackground as well as a good experience in working at low level and with the hardware (and also understand some machine architecture and machine language). There are some books i know of to leran the os architecture and i/o kit (but it's all old stuff and i didn't find the included explainations good enought in some instances, but they are better than nothing as a starting point) which are: OS X and IOS kernel programming and OS X internals.

 

I also reccomend you to check out the source code of some simple apple-made drivers (see some older source code from apple like the systems kexts from os x 10.6 or 10.5) and some simple open source drivers, for example for the sound drivers you can check out the cmi8738 driver.

 

Consider that a lof of stuff in those old books and source codes is outdated, for example you may need to be carefoul because of all the changes in how memory allocation works.

 

Final considerations are that you may want to work using an older version of xcode and an older version of mac os x since a lot of stuff reguarding the development of some kexts got deprecated or havely changed, and also consider giving your users some backwards compatibility like making the driver compatible with mountain lion or even snow leopard on 32 bit machines (people like owners of the older mac pros will appreciate that) and consider to make your projects open source, the hackintosh commiunity can be very untrusty of closed source projects and having your project to be open source is also a nice way to get help and feedback and have someone to keep the development of them after you abbandon them.

Edited by ITzTravelInTime

Share this post


Link to post
Share on other sites
10 hours ago, ITzTravelInTime said:

 

I strongly reccommend you to have a strong c and c++ blackground as well as a good experience in working at low level and with the hardware (and also understand some machine architecture and machine language). There are some books i know of to leran the os architecture and i/o kit (but it's all old stuff and i didn't find the included explainations good enought in some instances, but they are better than nothing as a starting point) which are: OS X and IOS kernel programming and OS X internals.

 

I also reccomend you to check out the source code of some simple apple-made drivers (see some older source code from apple like the systems kexts from os x 10.6 or 10.5) and some simple open source drivers, for example for the sound drivers you can check out the cmi8738 driver.

 

Consider that a lof of stuff in those old books and source codes is outdated, for example you may need to be carefoul because of all the changes in how memory allocation works.

 

Final considerations are that you may want to work using an older version of xcode and an older version of mac os x since a lot of stuff reguarding the development of some kexts got deprecated or havely changed, and also consider giving your users some backwards compatibility like making the driver compatible with mountain lion or even snow leopard on 32 bit machines (people like owners of the older mac pros will appreciate that) and consider to make your projects open source, the hackintosh commiunity can be very untrusty of closed source projects and having your project to be open source is also a nice way to get help and feedback and have someone to keep the development of them after you abbandon them.

I appreciate it.

I was a iOS developer, and a go developer now. But it seems that no help to develop a driver.

 

Thx for ur advice. I would follow ur advise and have a try.

Share this post


Link to post
Share on other sites
Posted (edited)

Issue: no ipv6 addresses on Nic after sleep/wake.

 

Hi,

I use this driver with OC 0.5.7/10.15.4 on a Gigabyte B360M D3H (i5-8400).

Currently, after sleep/wake, the NIC loses all its ipv6 addresses. Reboot or ifconfig down/up resolves this temporarily.

I added a Realtek NIC with RTL8111 Driver and compared the debug messages and code of both drivers. As I am no driver coder please do _not_  take the following as a fact...

 

It seems that both drivers behave differently during wake up. Both drivers run through their enable-function (intelEnable() , enableRTL8111()).

While the Realtek Driver always calls setLinkStatus(kIONetworkLinkValid)  in its enableRTL8111() func, the Intel driver has a condition wrapped around the call so that after wake, setLinkStatus() was not called during my tests.

 

Snippet from intelEnable() (including an additional DebugLog)

if (!linkOpts || !intelCheckLink(&adapterData)) {
        linkOpts = 0;
        setLinkStatus(kIONetworkLinkValid);
        DebugLog("intelmausi setLinkstatus=%d in intelEnable if-branch()  \n", kIONetworkLinkValid);

    }

the variable linkOpts holds the value 4 after wake.

 

I looked at the rest of the code where linkOpts is set. Before sleep, it gets set to value 4 (=kIONetworkLinkNoNetworkChange) in func intelDisable()

 linkOpts = kIONetworkLinkNoNetworkChange;
        linkStatus |= linkOpts;

I did not find any corresponding code in RTL8111 driver and I do not really understand its purpose ,why linkOpts is set to kIONetworkLinkNoNetworkChange.

For testing purposes I changed the code above to

linkOpts = kIONetworkLinkValid;
        linkStatus |= linkOpts;

linkOpts now gets value 1 (= kIONetworkLinkValid) and now the condition in intelEnable() is met and setLinkStatus(kIONetworkLinkValid) is called after wake and ipv6 addresses are bound to the NIC.

 

As said, I do not really understand the idea behind linkOpts value and its usage in enableIntel().

Perhaps some devs could have a look at the topic to get ipv6 assigned after sleep/wake.

 

Kind regards, T.

 

 

Edited by TalkingHead
I am _not_ a coder ;-)

Share this post


Link to post
Share on other sites

@TalkingHead There is no bug, the driver is working as specified. The root of the problem is located in your DHCPv6 configuration. The option kIONetworkLinkNoNetworkChange tells the network stack to skip renewal of the DHCP leases after wakeup because the has been no change. This speeds up wakeup and has been designed to work that way. It's only used when WoL is enabled, a valid link was established while the machine went to sleep and the link is still up when it wakes up.

 

I tested this option intensively years ago when I implemented this feature and I use it in my network without any problems since then. In case you are experiencing problems, best option would be to fix DHCPv6, in case you can't do that, disable WoL on your machine and everything will be fine.

 

Mieze :cat:

Share this post


Link to post
Share on other sites
19 minutes ago, Mieze said:

@TalkingHead [...big snip...]

 

I tested this option intensively years ago when I implemented this feature and I use it in my network without any problems since then. In case you are experiencing problems, best option would be to fix DHCPv6, in case you can't do that, disable WoL on your machine and everything will be fine.

 

Mieze :cat:

Hello Mieze,

thank you very much for the details and clarification.

And thnx for the drivers :-)

 

Kind regards, T.

Share this post


Link to post
Share on other sites
Posted (edited)

Hi everybody!
Great work Mieze!!!
Using a compiled Kext of previous version and wondering if a compiled version of version 2.5.1d1 can be found somewere or if someone could be so kind to compile it and attach it here (MacOS 10.15 Catalina).

TIA

K.

   
Edited by KvL
typo fix

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      https://tinyurl.com/rkqmpd9
       
      --OpenCore Folder--
      https://tinyurl.com/y75hqg7z
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By toma977
      I need help for gpu, intel Celeron 2955u
      intel HD Graphics Haswell gt1
       
      i read and try this
      link: 
      but didn’t help, can someone help me?
    • By Mieze
      This project is dedicated to Lucy, my lovely little Tyrannofelis Rex. 
       

       
      LucyRTL8125Ethernet is an open source driver for the Realtek RTL8125 family of 2.5GBit Ethernet controllers.
       
      Key Features of the Driver
      Supports all versions of Realtek's RTL8125 2.5GBit Ethernet Controllers found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload over IPv4 and IPv6 (still disabled until I find time to test it). Support for TCP/IPv4, UDP/IPv4, TCP/IPv6 and UDP/IPv6 checksum offload. Supports jumbo frames up to 9000 bytes (strongly recommended for 2.5GBit operation). Fully optimized for Catalina (doesn't work with Mojave and below). Note that older versions of macOS might not support 2.5GB Ethernet. Supports Wake on LAN (untested). Supports VLAN (untested). Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully under Catalina (10.15.4) and, according to first tests, is working stable. I haven't experienced any Kernel Panics during my tests and is working stable on my primary work machine. The driver has been designed to work with Catalina but might also work with Mojave (untested), provided you build from source with Xcode 10.. Please keep in mind that support for 2.5GBit Ethernet was introduced in Mojave (or maybe High Sierra?) so that there is no way to make it work with Sierra or below.  
      Known Issues
      Using autoselect medium it seems to prefer negotiating a connection speed of 1Gbit with my switch so that I had to select 2.5GBit/s manually in order to achieve this speed but it might be different with other switches.   Installation
      You might want to install the driver to /L/E as usual but it's also ok to use Clover's injection function (installation in the EFI folder). Use your favorite kext installation tool for installation or perform the installation manually (for Clover injection). It's your call!  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      Changelog
      Version 1.0.0d3 (2020-04-20) First working development release.  
      Getting the driver
      Source code can be found on GitHub: https://github.com/Mieze/LucyRTL8125Ethernet You'll find the lastest prebuilt binary here in this thread (see below).  
       
×