Jump to content
Mieze

IntelMausiEthernet.kext for Intel onboard LAN

896 posts in this topic

Recommended Posts

Has anyone had success/failure with using UPnP working with this Intel Network? I have a onboard Intel I219V2, that is working quite well, except I can't make UPnP work.  It works fine for other devices on my network, and my previous mac Mini.

 

In fact, I've not been able to get forwarded ports working even if I do them manually.

 

Any help or pointers towards where to look would be greatly appreciated.  

 

(High Sierra, i7-8700K, ASUS ROG STRIX Z370-G)

Share this post


Link to post
Share on other sites
Advertisement
On 22.4.2018 at 11:23 PM, Mieze said:

Frankly, I have no idea in particular because I don't have experiences with X99 based systems but you should follow the general guidelines from post #1. Next check the BIOS, in particular make sure it's up to date and that the settings are correct. Also check DSDT as well as SSDT(s). After that, examine the kernel logs for error messages and don't forget to take a look at network statistics (use netstat in Terminal).

 

Good luck!

 

Mieze

 

Hi Mieze,

 

just a short feedback! It works with full speed now, I've updated my OMV 2.x to the most recent 3.x version (Openmediavault) - and I think I messed up my SMB settings on the old version in the past due to my fixing in 2016 with the old hackintosh mac pro 5.1 on Asus P6TSE. Now with 110MB/s nice and clean, thanks for your help! I love this community!

Share this post


Link to post
Share on other sites

Hi Mieze,

 

I can't WOL my hackintosh anymore. Everything was working before. I updated from El Capitan to High Sierra couple of weeks ago (and incremental updates after that) and updated Your kext and it stopped working at some point, I don't know when.

 

My MoBo is Gigabyte Z97-D3H with Ozmosis, Intel I217V.  I have WOL checked in BIOS, Wake for Ethernet... checked. WOL packets forwarding is working. When hack goes to sleep, WOL works for a very short time and then no longer works. I tried putting a real mac on the network and setting it as sleep proxy but it didn't help. It normally wakes with keyboard or mouse.

 

Any suggestions?

 

Best regards,

Goran

Share this post


Link to post
Share on other sites
11 hours ago, mrjayviper said:

any chance of including i350 to the list? thanks!

No because it has a completely different architecture.

 

Mieze

21 hours ago, gorans said:

Hi Mieze,

 

I can't WOL my hackintosh anymore. Everything was working before. I updated from El Capitan to High Sierra couple of weeks ago (and incremental updates after that) and updated Your kext and it stopped working at some point, I don't know when.

 

My MoBo is Gigabyte Z97-D3H with Ozmosis, Intel I217V.  I have WOL checked in BIOS, Wake for Ethernet... checked. WOL packets forwarding is working. When hack goes to sleep, WOL works for a very short time and then no longer works. I tried putting a real mac on the network and setting it as sleep proxy but it didn't help. It normally wakes with keyboard or mouse.

 

Any suggestions?

 

Best regards,

Goran

WoL in BIOS has really nothing to do with WoL in MacOS. Disable it. I'd check the BIOS settings in order to make sure that the network stack, network boot, etc. are disabled.

 

Mieze

Share this post


Link to post
Share on other sites
58 minutes ago, Mieze said:

WoL in BIOS has really nothing to do with WoL in MacOS. Disable it. I'd check the BIOS settings in order to make sure that the network stack, network boot, etc. are disabled.

 

Mieze 

 

Thanks for Your reply. I disabled WOL in BIOS, still nothing. Other network and power related settings are:

- LAN PXE BOOT ROM disabled

- NETWORK STACK disabled

- INTEL SMART CONNECT disabled

- WOL disabled

- ERP disabled

- PLATFORM POWER MANAGEMENT enabled

     PEG ASPM auto

     PCIE ASPM auto

     CPU DMI LINK ASPM CONTROL L0sL1

     PCH DMI LINK ASPM CONTROL enabled

 

pmset -g
System-wide power settings:
 DestroyFVKeyOnStandby        0
Currently in use:
 standby              0
 Sleep On Power Button 1
 womp                 1
 hibernatefile        /var/vm/sleepimage
 powernap             0
 networkoversleep     1
 disksleep            10
 sleep                15
 autopoweroffdelay    28800
 hibernatemode        0
 autopoweroff         0
 ttyskeepawake        1
 displaysleep         15
 standbydelay         10800
 pmset -g cap
Capabilities for AC Power:
 displaysleep
 disksleep
 sleep
 womp
 standby
 standbydelay
 powernap
 ttyskeepawake
 hibernatemode
 hibernatefile
 autopoweroff
 autopoweroffdelay

What next? :)

 

Best regards,

Goran

Share this post


Link to post
Share on other sites
On 5/3/2018 at 7:55 PM, gorans said:

What next? :)

Send me kernel logs of the driver created with the debug version of the kext including a full boot sequence and a sleep / wake cycle.

 

Mieze

Share this post


Link to post
Share on other sites

Will do and report back. I think that my Ethernet port is totally powered down during sleep and that's what's causing the problem...

Share this post


Link to post
Share on other sites
2 minutes ago, gorans said:

Will do and report back. I think that my Ethernet port is totally powered down during sleep and that's what's causing the problem...

This might be a DSDT related issue as method _PRW must be properly defined for a device in order to be able to wake the system.

 

Mieze

Share this post


Link to post
Share on other sites

As I said, I'm using Ozmosis and no separate DSDT that I can check or edit (nor I have the knowledge to do so). I asked @crusher. , who made the ROM, to take a look, but still waiting for a reply.

Share this post


Link to post
Share on other sites
1 minute ago, gorans said:

As I said, I'm using Ozmosis and no separate DSDT that I can check or edit (nor I have the knowledge to do so). I asked @crusher. , who made the ROM, to take a look, but still waiting for a reply.

You can extract the DSDT and the SSDTs.

 

Mieze

Share this post


Link to post
Share on other sites
45 minutes ago, Mieze said:

You can extract the DSDT and the SSDTs.

 

Mieze

 

I generated SSDT with pikeralpha ssdtPRGen.sh script, and put it into /EFI/Oz/Acpi/Load/.

I extracted DSDT from ROM. Attached is the archive with DSDT, SSDT and boot log so You can take a look.

I will install debug kext and provide sleep/wake logs but I can't do it right now.

 

Best regards,

Goran

 

 

boot-ssdt-dsdt.zip

Share this post


Link to post
Share on other sites
On 5/7/2018 at 5:39 PM, gorans said:

Here is also sleep-wake sequence from "log show --predicate "processID == 0" --debug". Turning on ethernet, sleep, wake.sleep-wake.zip

Your kernel logs are worthless because they haven't been created with the debug version so that there isn't enough information to retrace what happened.

 

Mieze

Share this post


Link to post
Share on other sites

WOL works now. What I did:

1. Installed AppleIntelE1000, didn't work, reinstalled IntelMausiEthernet. WOL didn't work.

2. Installed latest FakeSMC sensors and went through BIOS settings. Turned on Intel Rapid Start and checked in Network Adapter that WOL is turned on there also. WOL worked but no sensors in HW Monitor.

3. Reinstalled old Sensors and rebooted. WOL still works

4. Turned off Intel Rapid start in BIOS. WOL still works!

So, I have exactly the same setup as before (and same messages in log) but WOL is working. I have no idea why.  :cursing: 

Best regards,
Goran

Share this post


Link to post
Share on other sites
12 hours ago, gorans said:

So, I have exactly the same setup as before (and same messages in log) but WOL is working. I have no idea why.  :cursing: 

Well, it might have been the result of a messed up BIOS configuration which was fixed by redoing the configuration. Anyway, I'm happy that the problem is solved now. :)

 

Mieze

 

Share this post


Link to post
Share on other sites
6 hours ago, Mieze said:

Well, it might have been the result of a messed up BIOS configuration which was fixed by redoing the configuration. Anyway, I'm happy that the problem is solved now. :)

 

Mieze

 

I would think so but I already reset (cmd-alt-P-R) PRAM and changed the settings couple of times before, so I'm still puzzled with this. :wacko:

 

If I leave ethernet hardware configuration on Automatic, It's only full-duplex. Is it better to select Manual, and then select full-duplex, flow-control, energy -efficient-ethernet? Any benefits?

 

Thanks for Your support.

 

Best regards,

Goran

Share this post


Link to post
Share on other sites

after wake up (it happened first time):

 

*** Panic Report ***
panic(cpu 0 caller 0xffffff801758776f): Kernel trap at 0xffffff7f9afd57d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff81fbe25008, CR3: 0x0000000022232000, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xffffff81bb305000, RCX: 0x0000000000000000, RDX: 0x0000000000000200
RSP: 0xffffff920ca63e30, RBP: 0xffffff920ca63eb0, RSI: 0xffffff803e9c0000, RDI: 0xffffff81bb305000
R8:  0x0000000000000000, R9:  0x000000000000001a, R10: 0xffffff8017debc80, R11: 0xffffff7f9afd604e
R12: 0xffffff81bb305000, R13: 0xffffff803eba2800, R14: 0xffffff81fbe25000, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9afd57d5, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff81fbe25008, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff920ca63900 : 0xffffff801746c1c6 
0xffffff920ca63950 : 0xffffff8017595274 
0xffffff920ca63990 : 0xffffff8017587544 
0xffffff920ca63a00 : 0xffffff801741e1e0 
0xffffff920ca63a20 : 0xffffff801746bc3c 
0xffffff920ca63b50 : 0xffffff801746b9fc 
0xffffff920ca63bb0 : 0xffffff801758776f 
0xffffff920ca63d20 : 0xffffff801741e1e0 
0xffffff920ca63d40 : 0xffffff7f9afd57d5 
0xffffff920ca63eb0 : 0xffffff7f9afd60ac 
0xffffff920ca63ed0 : 0xffffff8017a99785 
0xffffff920ca63f30 : 0xffffff8017a97ef2 
0xffffff920ca63f70 : 0xffffff8017a9752c 
0xffffff920ca63fa0 : 0xffffff801741d557 
      Kernel Extensions in backtrace:
         com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f9afd2000->0xffffff7f9afe5fff
            dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f98abe000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f97c94000

BSD process name corresponding to current thread: kernel_task

Mac OS version:
17G65

 

Share this post


Link to post
Share on other sites
20 hours ago, iStigPL said:

after wake up (it happened first time):

 


*** Panic Report ***
panic(cpu 0 caller 0xffffff801758776f): Kernel trap at 0xffffff7f9afd57d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff81fbe25008, CR3: 0x0000000022232000, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xffffff81bb305000, RCX: 0x0000000000000000, RDX: 0x0000000000000200
RSP: 0xffffff920ca63e30, RBP: 0xffffff920ca63eb0, RSI: 0xffffff803e9c0000, RDI: 0xffffff81bb305000
R8:  0x0000000000000000, R9:  0x000000000000001a, R10: 0xffffff8017debc80, R11: 0xffffff7f9afd604e
R12: 0xffffff81bb305000, R13: 0xffffff803eba2800, R14: 0xffffff81fbe25000, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9afd57d5, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff81fbe25008, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff920ca63900 : 0xffffff801746c1c6 
0xffffff920ca63950 : 0xffffff8017595274 
0xffffff920ca63990 : 0xffffff8017587544 
0xffffff920ca63a00 : 0xffffff801741e1e0 
0xffffff920ca63a20 : 0xffffff801746bc3c 
0xffffff920ca63b50 : 0xffffff801746b9fc 
0xffffff920ca63bb0 : 0xffffff801758776f 
0xffffff920ca63d20 : 0xffffff801741e1e0 
0xffffff920ca63d40 : 0xffffff7f9afd57d5 
0xffffff920ca63eb0 : 0xffffff7f9afd60ac 
0xffffff920ca63ed0 : 0xffffff8017a99785 
0xffffff920ca63f30 : 0xffffff8017a97ef2 
0xffffff920ca63f70 : 0xffffff8017a9752c 
0xffffff920ca63fa0 : 0xffffff801741d557 
      Kernel Extensions in backtrace:
         com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f9afd2000->0xffffff7f9afe5fff
            dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f98abe000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f97c94000

BSD process name corresponding to current thread: kernel_task

Mac OS version:
17G65

 

Driver related kernel panics occur when a driver fails to communicate with the OS, which is definitely not the case for IntelMausiEthernet, or when there is something wrong with the system, for example messed up system caches, a broken DSDT or a wrong BIOS setting which causes BIOS code to interfere with the driver. Check for a messed up system (system caches, etc.), a DSDT related problem or a wrong BIOS setting. Anyway, fix your system to get rid of the KP!

Mieze

Share this post


Link to post
Share on other sites

Hello! 

I have periodically system crash on high network loads. Below crash report. Is there anyone facing with the same issues? How to solve it?

 

Spoiler

Anonymous UUID:       785CC93B-80E0-B8BA-D2FA-6B99607B4B71

Mon Jul 30 22:16:08 2018

*** Panic Report ***
panic(cpu 0 caller 0xffffff801d98776f): Kernel trap at 0xffffff7f9fa4a7d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff820d32d008, CR3: 0x0000000032867000, CR4: 0x00000000003627e0
RAX: 0x0000000000000000, RBX: 0xffffff81cc935000, RCX: 0xffffff922005be88, RDX: 0x0000000000000100
RSP: 0xffffff922005bcc0, RBP: 0xffffff922005bd40, RSI: 0xffffff80501f0000, RDI: 0xffffff81cc935000
R8:  0x0000000000000000, R9:  0x0000000000989680, R10: 0xffffff801e1ebc80, R11: 0x0000000000000000
R12: 0xffffff81cc935000, R13: 0x0000000000000000, R14: 0xffffff820d32d000, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9fa4a7d5, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff820d32d008, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff922005b790 : 0xffffff801d86c1c6 
0xffffff922005b7e0 : 0xffffff801d995274 
0xffffff922005b820 : 0xffffff801d987544 
0xffffff922005b890 : 0xffffff801d81e1e0 
0xffffff922005b8b0 : 0xffffff801d86bc3c 
0xffffff922005b9e0 : 0xffffff801d86b9fc 
0xffffff922005ba40 : 0xffffff801d98776f 
0xffffff922005bbb0 : 0xffffff801d81e1e0 
0xffffff922005bbd0 : 0xffffff7f9fa4a7d5 
0xffffff922005bd40 : 0xffffff7f9fa4b18c 
0xffffff922005bd60 : 0xffffff7f9f0834ce 
0xffffff922005bd90 : 0xffffff801de9ad68 
0xffffff922005be00 : 0xffffff7f9f083538 
0xffffff922005be60 : 0xffffff7f9f0877ac 
0xffffff922005bee0 : 0xffffff801db0a665 
0xffffff922005bfa0 : 0xffffff801d81d557 
      Kernel Extensions in backtrace:
         com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f9f079000->0xffffff7f9f0a8fff
         com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f9fa47000->0xffffff7f9fa5afff
            dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f9f079000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f9e094000

BSD process name corresponding to current thread: kernel_task

Mac OS version:
17G65

Kernel version:
Darwin Kernel Version 17.7.0: Thu Jun 21 22:53:14 PDT 2018; root:xnu-4570.71.2~1/RELEASE_X86_64
Kernel UUID: 1AE5ACFD-3B6F-3D74-AD52-31F1430DBC6F
Kernel slide:     0x000000001d600000
Kernel text base: 0xffffff801d800000
__HIB  text base: 0xffffff801d700000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)

System uptime in nanoseconds: 8629076700609
last loaded kext at 3737931291300: com.apple.driver.AppleXsanScheme    3 (addr 0xffffff7fa068a000, size 32768)
last unloaded kext at 4295909974973: com.apple.driver.AppleXsanScheme    3 (addr 0xffffff7fa068a000, size 32768)
loaded kexts:
com.insanelymac.IntelMausiEthernet    2.4.0d0
org.netkas.driver.FakeSMC    1787
as.vit9696.AppleALC    1.3.0
as.vit9696.WhateverGreen    1.2.0
as.vit9696.Lilu    1.2.5
com.rehabman.driver.USBInjectAll    0.6.6
com.apple.filesystems.smbfs    3.2.3
com.apple.filesystems.msdosfs    1.10
com.apple.driver.AudioAUUC    1.70
com.apple.filesystems.autofs    3.0
com.apple.AGDCPluginDisplayMetrics    3.20.13
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.iokit.IOBluetoothSerialManager    6.0.7f10
com.apple.driver.AppleUpstreamUserClient    3.6.5
com.apple.driver.pmtelemetry    1
com.apple.driver.AppleMCCSControl    1.5.5
com.apple.driver.AGPM    110.23.37
com.apple.driver.ApplePlatformEnabler    2.7.0d0
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AppleHV    1
com.apple.driver.AppleIntelKBLGraphics    10.3.6
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHDA    281.52
com.apple.driver.AppleIntelPCHPMC    2.0.1
com.apple.driver.AirPort.BrcmNIC    1241.31.1a9
com.apple.driver.AppleIntelKBLGraphicsFramebuffer    10.3.6
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleIntelSlowAdaptiveClocking    4.0.0
com.apple.BootCache    40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.AppleSystemPolicy    1.0
com.apple.filesystems.hfs.kext    407.50.6
com.apple.filesystems.apfs    748.51.0
com.apple.driver.AppleAHCIPort    329.50.2
com.apple.driver.AppleACPIButtons    6.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.nke.applicationfirewall    183
com.apple.driver.IOBluetoothHIDDriver    6.0.7f10
com.apple.kext.triggers    1.0
com.apple.iokit.IOAVBFamily    680.2
com.apple.plugin.IOgPTPPlugin    680.15
com.apple.iokit.IOEthernetAVBController    1.1.0
com.apple.driver.AppleSSE    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.AppleSMBusController    1.0.18d1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.driver.DspFuncLib    281.52
com.apple.kext.OSvKernDSPLib    526
com.apple.iokit.IONDRVSupport    519.20
com.apple.AppleGPUWrangler    3.20.13
com.apple.driver.AppleHDAController    281.52
com.apple.iokit.IOHDAFamily    281.52
com.apple.iokit.IOAudioFamily    206.5
com.apple.vecLib.kext    1.2.0
com.apple.iokit.IO80211Family    1200.12.2
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.driver.corecapture    1.0.4
com.apple.AppleGraphicsDeviceControl    3.20.13
com.apple.iokit.IOAcceleratorFamily2    378.26
com.apple.iokit.IOGraphicsFamily    519.20
com.apple.iokit.IOSurface    211.15
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.IOPlatformPluginFamily    6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily    1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    6.0.7f10
com.apple.iokit.IOBluetoothHostControllerUSBTransport    6.0.7f10
com.apple.iokit.IOBluetoothHostControllerTransport    6.0.7f10
com.apple.iokit.IOBluetoothFamily    6.0.7f10
com.apple.driver.usb.IOUSBHostHIDDevice    1.2
com.apple.driver.AppleUSBHostMergeProperties    1.2
com.apple.driver.usb.AppleUSBHub    1.2
com.apple.driver.usb.networking    5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice    1.2
com.apple.filesystems.hfs.encodings.kext    1
com.apple.driver.usb.AppleUSBHostPacketFilter    1.0
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IONVMeFamily    2.1.0
com.apple.iokit.IOAHCIFamily    288
com.apple.driver.usb.AppleUSBXHCIPCI    1.2
com.apple.driver.usb.AppleUSBXHCI    1.2
com.apple.driver.AppleEFINVRAM    2.1
com.apple.driver.AppleEFIRuntime    2.1
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOTimeSyncFamily    680.15
com.apple.iokit.IONetworkingFamily    3.4
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleEffaceableStorage    1.0
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleUSBTDM    439.70.3
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.iokit.IOUSBMassStorageDriver    140.70.2
com.apple.iokit.IOSCSIBlockCommandsDevice    404.30.2
com.apple.iokit.IOSCSIArchitectureModelFamily    404.30.2
com.apple.driver.DiskImages    480.60.1
com.apple.iokit.IOStorageFamily    2.1
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.KernelRelayHost    1
com.apple.iokit.IOUSBHostFamily    1.2
com.apple.driver.usb.AppleUSBCommon    1.0
com.apple.driver.AppleBusPowerController    1.0
com.apple.driver.AppleSEPManager    1.0.1
com.apple.driver.IOSlaveProcessor    1
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleACPIPlatform    6.1
com.apple.driver.AppleSMC    3.1.9
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.Libm    1
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0

EOF
Model: iMacPro1,1, BootROM IMP11.0064.B30, 6 processors, 3.70 GHz, 16 GB, SMC 2.41f1
Graphics: Intel UHD Graphics 630, Intel UHD Graphics 630, Built-In
Memory Module: BANK 0/DIMM1, 8 GB, DDR4, 3000 MHz, Corsair, CMK16GX4M2B3000C15
Memory Module: BANK 1/DIMM1, 8 GB, DDR4, 3000 MHz, Corsair, CMK16GX4M2B3000C15
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.77.37.31.1a9)
Bluetooth: Version 6.0.7f10, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: Intel UHD Graphics 630, VGA-Compatible Controller, PCI Slot 1
PCI Card: Intel Z370M Series Chipset USB xHCI Host Controller, USB Controller, Built In
PCI Card: Intel Z370M Series Chipset MEI Controller, IMEI Controller, Built In
PCI Card: Intel Z370M Series Chipset SATA Controller, AHCI Controller, Built In
PCI Card: Intel Z370M Series Chipset PMC, PMC-Controller, Built In
PCI Card: Realtek ALC1220 HD Audio, HD-Audio-Controller, Built In
PCI Card: Apple AirPort Wireless Controller, AirPort Controller, Slot-4
PCI Card: ASMedia ASM3142 #1 1x USB 3.1 Type-C, USB eXtensible Host Controller, Built In
PCI Card: ASMedia ASM3142 #2 2x USB 3.1 Type-A and Type-C External, USB eXtensible Host Controller, Built In
PCI Card: Intel I219V2 PCI Express Gigabit Ethernet, Ethernet Controller, Built In
PCI Card: Apple SSD AP512M, NVM Express Controller, Built In
USB Device: USB 3.1 Bus
USB Device: USB 3.0 Bus
USB Device: USB Storage
USB Device: USB Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: USB 3.1 Bus
Thunderbolt Bus: 
 

 

Share this post


Link to post
Share on other sites
3 minutes ago, v.osypets said:

Hello! 

I have periodically system crash on high network loads. Below crash report. Is there anyone facing with the same issues? How to solve it?

 

  Reveal hidden contents

Anonymous UUID:       785CC93B-80E0-B8BA-D2FA-6B99607B4B71

Mon Jul 30 22:16:08 2018

*** Panic Report ***
panic(cpu 0 caller 0xffffff801d98776f): Kernel trap at 0xffffff7f9fa4a7d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff820d32d008, CR3: 0x0000000032867000, CR4: 0x00000000003627e0
RAX: 0x0000000000000000, RBX: 0xffffff81cc935000, RCX: 0xffffff922005be88, RDX: 0x0000000000000100
RSP: 0xffffff922005bcc0, RBP: 0xffffff922005bd40, RSI: 0xffffff80501f0000, RDI: 0xffffff81cc935000
R8:  0x0000000000000000, R9:  0x0000000000989680, R10: 0xffffff801e1ebc80, R11: 0x0000000000000000
R12: 0xffffff81cc935000, R13: 0x0000000000000000, R14: 0xffffff820d32d000, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9fa4a7d5, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff820d32d008, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff922005b790 : 0xffffff801d86c1c6 
0xffffff922005b7e0 : 0xffffff801d995274 
0xffffff922005b820 : 0xffffff801d987544 
0xffffff922005b890 : 0xffffff801d81e1e0 
0xffffff922005b8b0 : 0xffffff801d86bc3c 
0xffffff922005b9e0 : 0xffffff801d86b9fc 
0xffffff922005ba40 : 0xffffff801d98776f 
0xffffff922005bbb0 : 0xffffff801d81e1e0 
0xffffff922005bbd0 : 0xffffff7f9fa4a7d5 
0xffffff922005bd40 : 0xffffff7f9fa4b18c 
0xffffff922005bd60 : 0xffffff7f9f0834ce 
0xffffff922005bd90 : 0xffffff801de9ad68 
0xffffff922005be00 : 0xffffff7f9f083538 
0xffffff922005be60 : 0xffffff7f9f0877ac 
0xffffff922005bee0 : 0xffffff801db0a665 
0xffffff922005bfa0 : 0xffffff801d81d557 
      Kernel Extensions in backtrace:
         com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f9f079000->0xffffff7f9f0a8fff
         com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f9fa47000->0xffffff7f9fa5afff
            dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f9f079000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f9e094000

BSD process name corresponding to current thread: kernel_task

Mac OS version:
17G65

Kernel version:
Darwin Kernel Version 17.7.0: Thu Jun 21 22:53:14 PDT 2018; root:xnu-4570.71.2~1/RELEASE_X86_64
Kernel UUID: 1AE5ACFD-3B6F-3D74-AD52-31F1430DBC6F
Kernel slide:     0x000000001d600000
Kernel text base: 0xffffff801d800000
__HIB  text base: 0xffffff801d700000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)

System uptime in nanoseconds: 8629076700609
last loaded kext at 3737931291300: com.apple.driver.AppleXsanScheme    3 (addr 0xffffff7fa068a000, size 32768)
last unloaded kext at 4295909974973: com.apple.driver.AppleXsanScheme    3 (addr 0xffffff7fa068a000, size 32768)
loaded kexts:
com.insanelymac.IntelMausiEthernet    2.4.0d0
org.netkas.driver.FakeSMC    1787
as.vit9696.AppleALC    1.3.0
as.vit9696.WhateverGreen    1.2.0
as.vit9696.Lilu    1.2.5
com.rehabman.driver.USBInjectAll    0.6.6
com.apple.filesystems.smbfs    3.2.3
com.apple.filesystems.msdosfs    1.10
com.apple.driver.AudioAUUC    1.70
com.apple.filesystems.autofs    3.0
com.apple.AGDCPluginDisplayMetrics    3.20.13
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.iokit.IOBluetoothSerialManager    6.0.7f10
com.apple.driver.AppleUpstreamUserClient    3.6.5
com.apple.driver.pmtelemetry    1
com.apple.driver.AppleMCCSControl    1.5.5
com.apple.driver.AGPM    110.23.37
com.apple.driver.ApplePlatformEnabler    2.7.0d0
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AppleHV    1
com.apple.driver.AppleIntelKBLGraphics    10.3.6
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHDA    281.52
com.apple.driver.AppleIntelPCHPMC    2.0.1
com.apple.driver.AirPort.BrcmNIC    1241.31.1a9
com.apple.driver.AppleIntelKBLGraphicsFramebuffer    10.3.6
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleIntelSlowAdaptiveClocking    4.0.0
com.apple.BootCache    40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.AppleSystemPolicy    1.0
com.apple.filesystems.hfs.kext    407.50.6
com.apple.filesystems.apfs    748.51.0
com.apple.driver.AppleAHCIPort    329.50.2
com.apple.driver.AppleACPIButtons    6.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.nke.applicationfirewall    183
com.apple.driver.IOBluetoothHIDDriver    6.0.7f10
com.apple.kext.triggers    1.0
com.apple.iokit.IOAVBFamily    680.2
com.apple.plugin.IOgPTPPlugin    680.15
com.apple.iokit.IOEthernetAVBController    1.1.0
com.apple.driver.AppleSSE    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.AppleSMBusController    1.0.18d1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.driver.DspFuncLib    281.52
com.apple.kext.OSvKernDSPLib    526
com.apple.iokit.IONDRVSupport    519.20
com.apple.AppleGPUWrangler    3.20.13
com.apple.driver.AppleHDAController    281.52
com.apple.iokit.IOHDAFamily    281.52
com.apple.iokit.IOAudioFamily    206.5
com.apple.vecLib.kext    1.2.0
com.apple.iokit.IO80211Family    1200.12.2
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.driver.corecapture    1.0.4
com.apple.AppleGraphicsDeviceControl    3.20.13
com.apple.iokit.IOAcceleratorFamily2    378.26
com.apple.iokit.IOGraphicsFamily    519.20
com.apple.iokit.IOSurface    211.15
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.IOPlatformPluginFamily    6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily    1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    6.0.7f10
com.apple.iokit.IOBluetoothHostControllerUSBTransport    6.0.7f10
com.apple.iokit.IOBluetoothHostControllerTransport    6.0.7f10
com.apple.iokit.IOBluetoothFamily    6.0.7f10
com.apple.driver.usb.IOUSBHostHIDDevice    1.2
com.apple.driver.AppleUSBHostMergeProperties    1.2
com.apple.driver.usb.AppleUSBHub    1.2
com.apple.driver.usb.networking    5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice    1.2
com.apple.filesystems.hfs.encodings.kext    1
com.apple.driver.usb.AppleUSBHostPacketFilter    1.0
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IONVMeFamily    2.1.0
com.apple.iokit.IOAHCIFamily    288
com.apple.driver.usb.AppleUSBXHCIPCI    1.2
com.apple.driver.usb.AppleUSBXHCI    1.2
com.apple.driver.AppleEFINVRAM    2.1
com.apple.driver.AppleEFIRuntime    2.1
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOTimeSyncFamily    680.15
com.apple.iokit.IONetworkingFamily    3.4
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleEffaceableStorage    1.0
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleUSBTDM    439.70.3
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.iokit.IOUSBMassStorageDriver    140.70.2
com.apple.iokit.IOSCSIBlockCommandsDevice    404.30.2
com.apple.iokit.IOSCSIArchitectureModelFamily    404.30.2
com.apple.driver.DiskImages    480.60.1
com.apple.iokit.IOStorageFamily    2.1
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.KernelRelayHost    1
com.apple.iokit.IOUSBHostFamily    1.2
com.apple.driver.usb.AppleUSBCommon    1.0
com.apple.driver.AppleBusPowerController    1.0
com.apple.driver.AppleSEPManager    1.0.1
com.apple.driver.IOSlaveProcessor    1
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleACPIPlatform    6.1
com.apple.driver.AppleSMC    3.1.9
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.Libm    1
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0

EOF
Model: iMacPro1,1, BootROM IMP11.0064.B30, 6 processors, 3.70 GHz, 16 GB, SMC 2.41f1
Graphics: Intel UHD Graphics 630, Intel UHD Graphics 630, Built-In
Memory Module: BANK 0/DIMM1, 8 GB, DDR4, 3000 MHz, Corsair, CMK16GX4M2B3000C15
Memory Module: BANK 1/DIMM1, 8 GB, DDR4, 3000 MHz, Corsair, CMK16GX4M2B3000C15
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.77.37.31.1a9)
Bluetooth: Version 6.0.7f10, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: Intel UHD Graphics 630, VGA-Compatible Controller, PCI Slot 1
PCI Card: Intel Z370M Series Chipset USB xHCI Host Controller, USB Controller, Built In
PCI Card: Intel Z370M Series Chipset MEI Controller, IMEI Controller, Built In
PCI Card: Intel Z370M Series Chipset SATA Controller, AHCI Controller, Built In
PCI Card: Intel Z370M Series Chipset PMC, PMC-Controller, Built In
PCI Card: Realtek ALC1220 HD Audio, HD-Audio-Controller, Built In
PCI Card: Apple AirPort Wireless Controller, AirPort Controller, Slot-4
PCI Card: ASMedia ASM3142 #1 1x USB 3.1 Type-C, USB eXtensible Host Controller, Built In
PCI Card: ASMedia ASM3142 #2 2x USB 3.1 Type-A and Type-C External, USB eXtensible Host Controller, Built In
PCI Card: Intel I219V2 PCI Express Gigabit Ethernet, Ethernet Controller, Built In
PCI Card: Apple SSD AP512M, NVM Express Controller, Built In
USB Device: USB 3.1 Bus
USB Device: USB 3.0 Bus
USB Device: USB Storage
USB Device: USB Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: USB 3.1 Bus
Thunderbolt Bus: 
 

 

 

I got a similar KP recently to the ones posted here. I wonder if 10.13.6 has an issue because the driver has been flawless for me except for this one recent KP.

Share this post


Link to post
Share on other sites
On 7/21/2018 at 8:38 AM, Mieze said:

Driver related kernel panics occur when a driver fails to communicate with the OS, which is definitely not the case for IntelMausiEthernet, or when there is something wrong with the system, for example messed up system caches, a broken DSDT or a wrong BIOS setting which causes BIOS code to interfere with the driver. Check for a messed up system (system caches, etc.), a DSDT related problem or a wrong BIOS setting. Anyway, fix your system to get rid of the KP!

Mieze

Hi Mieze,

 

I got similar KP after sleep, meanwhile it's ok to use wifi instead and leave ethernet unplugged.

 

BRs

Ganxiao

Share this post


Link to post
Share on other sites

Once again, fix your system and everything will be fine! This kind of KPs keep popping up after every major update and it always turned out that the driver is innocent. :cat:

 

Mieze

Share this post


Link to post
Share on other sites

Gigabyte z170 Ultra Gaming, I have been using Intelmausiethernet for a year without a problem.

 

Last week I installed a bcm943602cs which works like a charm. The downside is that the ethernet connection din't connect anymore. It is detected but does not work.

 

¿Any idea?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mieze
      Being asked to add support for Realtek's Fast Ethernet PCIe NICs to my RTL8111 driver I got tired of answering the same old question again and again so that I finally decided to write a separate driver for these chips and to make a few of you guys and gals happy.
       
      As of now the driver supports the following members the RTL810X Fast Ethernet family:
      RTL8101E RTL8102E RTL8103E RTL8401E RTL8105E RTL8402 RTL8106E RTL8106EUS RTL8107E   Here is a list of the driver's basic features:
      Supports Sierra (maybe El Capitan). 64 bit architecture only. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2. Built using Xcode 4.6.3.  
      Changelog Version 2.0.1 (2018-05-10): Fixes a problem with retrieval of the permanent MAC address on some chips. Version 2.0.0 (2017-04-04): Uses Apple's private driver interface introduced with 10.8. Adds support for the RTL8107E. Supports packet scheduling with QFQ. Adds support for flow control and EEE. Version 1.0.0 (2014-05-24): First offical release.     Installation   Before you install the driver you have to remove any installed driver for RTL810X. Goto /S/L/E and delete the old driver. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. If you forget this step you might experience strange problems with certain Apple domains, iTunes and iCloud later. Install the new driver and recreate the kernel cache. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.   Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any other Realtek kext from your system because they could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      Getting the driver
      There is a prebuilt binary in the Download section of this site: http://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/ The source code can be found on Github: https://github.com/Mieze/RealtekRTL8100   Mieze
    • By Mieze
      A New Driver for Realtek RTL8111
       
      Due to the lack of an OS X driver that makes use of the advanced features of the Realtek RTL81111/8168 series I started a new project with the aim to create a state of the art driver that gets the most out of those NICs which can be found on virtually any cheap board on the market today. Based on Realtek's Linux driver (version 8.035.0) I have written a driver that is optimized for performance while making efficient use of system resources and keeping the CPU usage down under heavy load.

      Key Features of the Driver
      Supports Realtek RTL8111/8168 B/C/D/E/F/G found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Fully optimized for Mountain Lion (64bit architecture) but should work with Lion too. As of now there is no support for Snow Leopard but it can be added if someone will create the necessary patches. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.  
      Limitations
      As checksum offload doesn't work with jumbo frames they are currently unsupported and will definitely never be. No support for 32bit kernels.  
      Installation
      Before you install the driver you have to remove any installed driver for RTL8111/8168.
      Goto /S/L/E and delete the old driver (Lnx2mac, AppleRealtekRTL8169, etc.). Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. If you forget this step you might experience strange problems with certain Apple domains, iTunes and iCloud later. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be found in /var/log/system.log. For Sierra and above use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any other Realtek kext from your system because they could prevent the driver from working properly. Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      FAQ
      How can I retrieve the kernel logs? In Terminal type "grep kernel /var/log/system.log". I want to disable Energy Efficient Ethernet (EEE) but I don't know how? Take a look at the driver's Info.plist file. There you will find an option named <key>enableEEE</key>. Change its value from <true/> to <false/>. Don't forget to recreate the kernel cache after changing the value. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Current status
      The driver has been successfully tested under 10.8.x and 10.9 with the B, C, D, E, F and G versions of the RTL8111/8168 and is known to work stable on these devices.  
      Changelog
      Version 2.2.2 (2018-01-21) Force ASPM state to disabled/enabled according to the config parameter setting. Requires 10.12 or newer. Version 2.2.1 (2016-03-12): Updated underlying linux sources from Realtek to 8.041.00. Added support for RTL8111H. Implemented Apple’s polled receive driver model (RXPOLL). Requires 10.11 or newer. Support for older versions of OS X has been dropped. Version 2.0.0 (2015-06-21): Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ. Please note that 2.0.0 is identical to 2.0.0d2. Only the version number has changed. Version 1.2.3 (2014-08-23): Reworked TSO4 and added support for TSO6. Version 1.2.2 (2014-08-44): Added an option to disable Active State Power Management (ASPM, default disabled) as ASPM seems to result in unstable operation of some chipsets. Resolved a problem with Link Aggregation after reboot. Added a workaround for the multicast filter bug of chipset 17 (RTL8111F) which prevented Bonjour from working properly Version 1.2.0 (2014-04-24): Updated underlying linux sources from Realtek to 8.037.00. Improved interrupt mitigate to use a less aggressive value for 10/100 MBit connections. Version 1.1.3 (2013-11-29): Improved transmit queue handling made it possible to reduce CPU load during packet transmission. Improved deadlock detection logic in order to avoid false positives due to lost interrupts. Version 1.1.2 (2013-08-03): Improved SMB performance in certain configurations. Faster browsing of large shares. Version 1.1.0 (2013-06-08): Support for TCP/IPv6 and UDP/IPv6 checksum offload added (can be disabled in Info.plist). Maximum size of the scatter-gather-list has been increased from 24 to 40 segments to resolve performance issues with TSO4 when offloading large packets which are highly fragmented. TSO4 can be disabled in Info.plist without rebuild. Statistics gathering has been improved to deliver more detailed information (resource shortages, transmitter resets, transmitter interrupt count). The interrupt mitigate settings has been changed to improve performance with SMB and to reduce CPU load. Configuration option added to allow for user defined interrupt mitigate settings without rebuild. Version 1.0.4 (2013-05-04): Moved setLinkStatus(kIONetworkLinkValid) from start() to enable(). Cleaned up getDescCommand(). Version 1.0.3 (2013-04-25): The issue after a reboot from Windows has been eliminated. Version 1.0.2 (2013-04-22): Added support for rx checksum offload of TCP and UDP over IPv6. Version 1.0.1 (2013-03-31): Improved behavior when rx checksum offload isn't working properly. Adds the chipset's model name to IORegistry so that it will show up in System Profiler.  
      Known Issues
      There are still performance problems with regard to SMB in certain configurations. My tests indicate that Apple's Broadcom driver shows the same behavior with those configurations. Obviously it's a more general problem that is not limited to my driver. WoL does not work in certain configurations. Old systems with 3 and 4 series chipsets exhibit performance issues in recent versions of macOS because there is no optimized power management for these systems in macOS anymore as Apple dropped support for the underlying hardware a long time ago. In case you are affected, please upgrade your hardware or find an alternative solution because I have no plans for a workaround. Sorry, but I don't think that it's worth the effort.  
      Getting the driver
      The source code can be found here: https://github.com/M...driver_for_OS_X There is also a pre-build binary for Mavericks and Yosemite: http://www.insanelym...n-and-wireless/  
      Building from Source
      I'm using XCode 4.6.3 for development. You can get a free copy of XCode after becoming a member of the Apple developer program. The free membership is sufficient in order to get access to development tools and documentation.
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By Angelo_
      Hi, I followed the rehabman guide (linked in the vanilla guide on the side of r/Hackintosh, not sure if I can link it) for laptops for my yoga 730ILW13 with an 8265u, Conexant 11870, 8gb of ram, 13.3" fhd and I found that upon booting the installer usb I get this weird issue where the screen displays what it should but the screen is incredibly dim (though it was off before using a flashlight on it) and it flashes every few seconds for a few milliseconds to the correct brightness, I used the plist for hd615-650 (including my 620), not quite sure what could be the culprit, first time hackintoshing a laptop so it might be a stupid brightness kext I forgot but didn't find any in that post or in this forum :c 
      Attached the clover zip so that anyone with more experience than me might give an idea in what could be a way to fix this.
      Thank you in advance 
       
       
       
      CLOVER.zip
    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

×