Jump to content
Mieze

IntelMausiEthernet.kext for Intel onboard LAN

952 posts in this topic

Recommended Posts

Danke Mieze! :-)

 

I just successfully installed my first Hackintosh (Gigabyte Z170X-Designare mobo) and used IntelMausiEthernet v2.2.0 with ##### and I get Ethernet connectivity!

 

Unfortunately I only get 50MB/s to our NAS, other machines with the same connections get full gigabit speed. Any clue what I can do to get full gigabit speed?

I would check the CPU load on the NAS and the Hack's  SMB parameters. Make sure that packet signing is disabled as this increases CPU load dramatically.

 

Mieze

Share this post


Link to post
Share on other sites
Advertisement

I would check the CPU load on the NAS and the Hack's  SMB parameters. Make sure that packet signing is disabled as this increases CPU load dramatically.

 

Mieze

 

Mieze, you are amazing! Disabling packet signing did the trick! Thank you so much!

Share this post


Link to post
Share on other sites

 

 

Mieze, you are amazing! Disabling packet signing did the trick! Thank you so much!

 

could someone please explain how Disabling packet signing and where to do it on Mac or Windows?

Share this post


Link to post
Share on other sites

Hello,

I've got a strange behavior with the ethernet connection.

 

When I use only macOS, there is no problems.

But when I boot on windows 10 to play a game or whatever, as soon as I boot back to macOS, the ethernet connection is not working properly : in the Networks preferences, I see a yellow light, and it says that it get an autoasign IP, and don't get the IP from the DHCP server (an internet box in france). I can try to deactivate and reactivate the service, but it's not getting the IP.
I have to reboot the hackintosh to get the network function properly (get the IP from the DHCP).

 

It happens every times I get back to macOS after booting to windows.

When I boot on macOS (cold boot, or not) after a session on macOS, there is no problems...

How can I help you diagnose what's happening ?

Thanks 

Miles

Share this post


Link to post
Share on other sites

@MilesTEG1: At first glance this sounds like a DHCP problem. I'm dual-booting on my I218 with Windows 10 too but have never experienced such an issue. Please send me your kernel logs showing the issue!

 

Mieze

Edited by Mieze

Share this post


Link to post
Share on other sites

@MilesTEG1: At first glance this sounds like a DHCP problem. I'm dual-booting on my I218 with Windows 10 too but have never experienced such an issue. Please send me your kernel logs showing the issue!

 

Mieze

Ok, I'll get the log.

It's in the console right ?

Share this post


Link to post
Share on other sites

Just try direct connect a 2 Gigabyte boards with CAT 7 cable and latest IntelMausiEthernet.kext using Manual Connection with Network Advanced settings: 1000BaseT Full Duplex on both computer,

but unfortunately I get only 100Mb/s :( I wonder if there is possibility to get 1000Mb/s 

 

On both machines is latest Sierra 10.2.4 

 

only different between them is: 

 

1. GA-z177x-UD5-TH /  i7-7700k  / Samsung 960 Pro M.2 SSD - boot

 

2. GA-z77x-UP5-TH with i7-3700k  / SSD simple 

 

Need help to get 1000Mb/s Gigabyte speed connection

Share this post


Link to post
Share on other sites

Ok, I'll get the log.

It's in the console right ?

Please see post #1 of this thread for instructions how to retrieve kernel logs.

 

Mieze

Share this post


Link to post
Share on other sites

Hi Mieze. Sorry to trouble you. I have a NC630T Ethernet card here which I'm trying to get IntelMausi to work with the card now i was wondering would you be able to add the support to the kext for 82571EB chipset or do i just the Device ID to IntelMausi using Xcode?

Thanks.

Jack.

Share this post


Link to post
Share on other sites

Hi Mieze. Sorry to trouble you. I have a NC630T Ethernet card here which I'm trying to get IntelMausi to work with the card now i was wondering would you be able to add the support to the kext for 82571EB chipset or do i just the Device ID to IntelMausi using Xcode?

I'm sorry, but IntelMausiEthernet won't work with 82571/2/4 chips because I intentionally removed support for these chips as they are junk silicon which is full of nasty hardware bugs and makes driver programming a pain.

 

Mieze

Share this post


Link to post
Share on other sites

Thanks for this driver, works great.

 

I noticed that the last version added support for Jumbo Frames. Realistically, is there any tangible advantage to enabling it for a simple home network?

Share this post


Link to post
Share on other sites

There  it is no reason to use jumbo frame if you don't own Network cards with support for JF, your clients doesn't have support for JF, your router doesn't support JF. Every equipment in the house needs JF, otherwise it's useless.

Share this post


Link to post
Share on other sites

Greetings. First of all thanks for all your work I'd like to know what I need to compile your driver to work on Mavericks. I'm using a Skylake processor with Mavericks thanks to Clover's FakeID. But I do not have internet. Thank you!!!

Share this post


Link to post
Share on other sites

Greetings. First of all thanks for all your work I'd like to know what I need to compile your driver to work on Mavericks. I'm using a Skylake processor with Mavericks thanks to Clover's FakeID. But I do not have internet. Thank you!!!

Franky, I don't know if it is possible at all to build a recent version of the driver, which supports I219, for Mavericks, at least I haven't tried and I don't have a working Mavericks installation anymore. In order to build the driver for mavericks, you'll need an older version of Xcode which includes the 10.9 SDK and select 10.9 as Deployment Target.

 

Best solution would be to upgrade your machine to Sierra. In case there is old hardware or software which doesn't work with Sierra, take my advice and get rid of it. It's definitely not worth the hassle!

 

Mieze

Share this post


Link to post
Share on other sites

Franky, I don't know if it is possible at all to build a recent version of the driver, which supports I219, for Mavericks, at least I haven't tried and I don't have a working Mavericks installation anymore. In order to build the driver for mavericks, you'll need an older version of Xcode which includes the 10.9 SDK and select 10.9 as Deployment Target.

 

Best solution would be to upgrade your machine to Sierra. In case there is old hardware or software which doesn't work with Sierra, take my advice and get rid of it. It's definitely not worth the hassle!

 

Mieze

My computer has an Intel i7 kabylake processor. I'm running Maverick using the clover fakeCpuID because I use an audio program called Pro Tools 10 and with Maverick is the last version of MacOS that works.

Share this post


Link to post
Share on other sites

My computer has an Intel i7 kabylake processor. I'm running Maverick using the clover fakeCpuID because I use an audio program called Pro Tools 10 and with Maverick is the last version of MacOS that works.

Pro Tools, oh yeah I know, I almost thought that because of your interests. Well, best thing would be to get an update for Pro Tools which supports Sierra.  Or in case something rules out this alternative, get a replacement for Pro Tools.

 

By the way, according to all the trouble I have heard users reporting about Pro Tools with recent hardware/software, one might think that the Pro in the Name stands for Problem.

 

Mieze

Share this post


Link to post
Share on other sites

My computer has an Intel i7 kabylake processor. I'm running Maverick using the clover fakeCpuID because I use an audio program called Pro Tools 10 and with Maverick is the last version of MacOS that works.

 

I don't know what nic your board has but would an earlier version of Mausi work? Looking in my EFI folder I have 2.0.1 in my 10.9 folder. But both of my desktop boards are old and use the 82579V chip.

Share this post


Link to post
Share on other sites

I don't know what nic your board has but would an earlier version of Mausi work? Looking in my EFI folder I have 2.0.1 in my 10.9 folder. But both of my desktop boards are old and use the 82579V chip.

My motherboard has intel I219 ethernet adapter. Thanks!!!

Share this post


Link to post
Share on other sites

Pro Tools, oh yeah I know, I almost thought that because of your interests. Well, best thing would be to get an update for Pro Tools which supports Sierra. Or in case something rules out this alternative, get a replacement for Pro Tools.

 

By the way, according to all the trouble I have heard users reporting about Pro Tools with recent hardware/software, one might think that the Pro in the Name stands for Problem.

 

Mieze

I installed the last Xcode and put manually the 10.9 SDK and tried compile the kext, the kext compile it but with 4 error. Is it possible that you tried? I can upload the 10.9SDK for you if you want.

Share this post


Link to post
Share on other sites

I installed the last Xcode and put manually the 10.9 SDK and tried compile the kext, the kext compile it but with 4 error. Is it possible that you tried? I can upload the 10.9SDK for you if you want.

Please post the error messages so that I can check what's wrong.

 

Mieze

Share this post


Link to post
Share on other sites

Please post the error messages so that I can check what's wrong.

 

Mieze

 

static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
{
	struct e1000_nvm_info *nvm = &hw->nvm;
	u32 eecd = er32(EECD);
	u32 mask;

	mask = BIT(count - 1);
	if (nvm->type == e1000_nvm_eeprom_spi)
		eecd |= E1000_EECD_DO;

	do {
		eecd &= ~E1000_EECD_DI;

		if (data & mask)
			eecd |= E1000_EECD_DI;

		ew32(EECD, eecd);
		e1e_flush();

		udelay(nvm->delay_usec);

		e1000_raise_eec_clk(hw, &eecd);
		e1000_lower_eec_clk(hw, &eecd);

		mask >>= 1;
	} while (mask);

	eecd &= ~E1000_EECD_DI;
	ew32(EECD, eecd);
}
static inline void prepareTSO6(mbuf_t m, UInt32 *mssHeaderSize, UInt32 *payloadSize)
{
    struct ip6_hdr *ip6Hdr = (struct ip6_hdr *)((UInt8 *)mbuf_data(m) + ETHER_HDR_LEN);
    struct tcphdr *tcpHdr = (struct tcphdr *)((UInt8 *)ip6Hdr + sizeof(struct ip6_hdr));
    UInt16 *addr = (UInt16 *)&ip6Hdr->ip6_src;
    UInt32 csum32 = 6;
    UInt32 plen = (UInt32)mbuf_pkthdr_len(m);
    UInt32 hlen = (tcpHdr->th_off << 2) + kMinL4HdrOffsetV6;
    UInt32 i;
    
    ip6Hdr->ip6_ctlun.ip6_un1.ip6_un1_plen = 0;

    for (i = 0; i < 16; i++)
        csum32 += ntohs(*addr++);
    
    csum32 += (csum32 >> 16);
    tcpHdr->th_sum = htons((UInt16)csum32);
    
    /* Flush the cache lines in order to enforce writeback. */
    asm volatile ("clflush %0" : "=m" (ip6Hdr->ip6_ctlun.ip6_un1.ip6_un1_plen));
    asm volatile ("clflush %0" : "=m" (tcpHdr->th_sum));
    
    *mssHeaderSize = ((*mssHeaderSize << 16) | (hlen << 8));
    *payloadSize = plen - hlen;
}

Share this post


Link to post
Share on other sites

@stinga11: The first two warnings can be ignored. Besides that, I already told you that you have to use an older version of Xcode. Use the latest version of Xcode 5 which was released together with Mavericks. Anything else might produce unpredictable results.

 

Mieze

Share this post


Link to post
Share on other sites

@stinga11: The first two warnings can be ignored. Besides that, I already told you that you have to use an older version of Xcode. Use the latest version of Xcode 5 which was released together with Mavericks. Anything else might produce unpredictable results.

 

Mieze

I compiled the kext using xcode 6.2 in Mavericks. I had a one compilation error that I solved quickly. The only doubt I have is, how can I have the Release version instead of the Debug one.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ThomasMattOnline
      Hello Everyone,

      Trying to get Hardware Acceleration working on my Hackintosh (HEVC Support) however I am such a noob, OpenCore is very new to me and would love some support.
      I have included screenshots and the EFI that is currently working on my System, I have USB 2 & 3.0 all working, however, the only thing I can fault is my GPU not being hardware acceleration enabled.

      Final Cut Pro X - Recognises GPU
      VideoProc - Doesn't recognise anything.
       
      (I am running the latest version of OpenCore 0.5.9)

      Things I've tried: I tried following the post https://www.tonymacx86.com/threads/catalina-10-15-2-update-lost-hevc-h265-acceleration.288563/ - No Luck
      I have also tried: https://forums.macrumors.com/threads/activate-amd-hardware-acceleration.2180095/page-53?post=28255048#post-28255048 - No luck either!

      My friend online tells me I shouldn't need such Kext as he has the same build as me but when I load his EFI on my system it boots with no USB 2 or 3.0 (I'm keeping his EFI off here as I've uploaded mine.)

      Please note: I appreciate all (any) pieces of advice and please do bear in mind that I am a noob and may need whatever you say simplifying as I can get easily confused.


      config.plist

    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      https://tinyurl.com/rkqmpd9
       
      --OpenCore Folder--
      https://tinyurl.com/y75hqg7z
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By toma977
      I need help for gpu, intel Celeron 2955u
      intel HD Graphics Haswell gt1
       
      i read and try this
      link: 
      but didn’t help, can someone help me?
×