Jump to content
Mieze

IntelMausiEthernet.kext for Intel onboard LAN

896 posts in this topic

Recommended Posts

So far, so good, so what? Still no indication for a driver problem. Your test doesn't prove anything because there are too many parameters you don't have under control, in particular the packet roundtrip time and the influence of the packet scheduler. Looks more like the result of the congestion avoidance mechanism which reacts very sensitive on the roundtrip time and it's variation or QFQ which is one of the reasons why IntelMausiEthernet is stable.

 

Mieze

 

Hummm ok, let's say you're right, what kind of kernel parameters would you play with then ?

I'd rather fix my problem than be right :)

 

(thanks for your time btw !! I hope I don't sound too cranky)

Share this post


Link to post
Share on other sites
Advertisement

Hummm ok, let's say you're right, what kind of kernel parameters would you play with then ?

I'd rather fix my problem than be right :)

 

(thanks for your time btw !! I hope I don't sound too cranky)

Frankly I'm not sure as there are things you can't control. The packet roundtrip time and it's variation are the factors which are used in order to detect congestion and it might easily produce false positives as both values are much higher for a remote connection which results in a dramatic slowdown. Basically it's a similar situation as with WIFI according to the IEEE802.11ac standard where the high roundtrip time is also a limiting factor and you might use the strategies used to optimize performance in these scenarios as a starting point.

 

The packet scheduler QFQ, which is a part of Apple's new driver interface, is something that is harder to influence but it is necessary in order to maintain stability under overload because it throttles the output rate when packets start to become bottled up in the output queue and prevents the network stack from dying due to the exhaustion of packet buffer memory. Comparison between versions 2.x.x of my drivers, which use QFQ, and versions 1.x.x, which use the traditional driver interface without packet scheduler, show that it might produce a significant performance hit in certain situations but it's necessary for a stable operation in some configurations, for example with virtualization software like VMware.

 

Mieze

Share this post


Link to post
Share on other sites

Frankly I'm not sure as there are things you can't control.

 

Thanks for you help !

 

I found a "killer" solution : I bought a TP-LINK TG-3468 that worked Out Of the Box. (Well almost, since I had the AppleRTL8169Ethernet.kext already installed.)

I disabled my internal ethernet to make it easy for my link to be on en0 systematically.

 

And now I'm back with my >100MB/s data rates ! \o/

 

thanks for your time anyways :) 

 

(just for refs, I have a gigabyte GA-X79-UD7 rev1 running Yosemite 10.10.5).

Share this post


Link to post
Share on other sites

Hi

 

I`m on my second Hackintosh Build. My First Clover based "Macbook Pro" based on a Lenovo T420 works great without many Kexting. Now i want to migrate my Workstation. 

 

First I had to change the Bootloader but this isn`t the Problem. With Chirmera the Boot works great. But the problem are the Kexts. At first the Network Card. Its an Intel 82579 LM Gigabit Network Card. I try to get the latest Version to get to work (Intel Mausi Version 20.2d3) but the last log in the Kernel Log ist:

 

Ethernet (Intelmausi): Failed to get adapter data with error -2

 

I didn`t find something here and on Google. Maybe You can help me?

 

I have the latest OS X Version 10.10.5 Yosemite on my System.

Share this post


Link to post
Share on other sites

Hi

 

I`m on my second Hackintosh Build. My First Clover based "Macbook Pro" based on a Lenovo T420 works great without many Kexting. Now i want to migrate my Workstation. 

 

First I had to change the Bootloader but this isn`t the Problem. With Chirmera the Boot works great. But the problem are the Kexts. At first the Network Card. Its an Intel 82579 LM Gigabit Network Card. I try to get the latest Version to get to work (Intel Mausi Version 20.2d3) but the last log in the Kernel Log ist:

 

Ethernet (Intelmausi): Failed to get adapter data with error -2

 

I didn`t find something here and on Google. Maybe You can help me?

 

I have the latest OS X Version 10.10.5 Yosemite on my System.

I need you complete kernel logs created with the debug version of the driver. 

 

Mieze

Share this post


Link to post
Share on other sites

I'm prepping to update my Hackintosh to El Capitan, and I was curious to see if anyone is running it yet with IntelMausi?

Share this post


Link to post
Share on other sites

I have an HP NC364T PCIe 4Pt Gigabit Server Adptr. This is a 82571EB chipset, which will not work with your driver. So my question is can I still use the AppleIntelE1000e.kext or hnack's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] version with this driver? Or, should I just switch to the hnack's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] version completely as it looks like the bug causing dropped internet is fixed (see here: http://www.tonymacx86.com/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-archived-threads/139013-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-6-4-1-appleintele1000e-kext-v3-1-0-bug-fix-2.html).

 

Any help would be appreciated.

 

Thanks!

Share this post


Link to post
Share on other sites

I have an HP NC364T PCIe 4Pt Gigabit Server Adptr. This is a 82571EB chipset, which will not work with your driver. So my question is can I still use the AppleIntelE1000e.kext or hnack's ##### version with this driver? Or, should I just switch to the hnack's ##### version completely as it looks like the bug causing dropped internet is fixed (see here: http://www.tonymacx86.com/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-archived-threads/139013-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-6-4-1-appleintele1000e-kext-v3-1-0-bug-fix-2.html).

 

Any help would be appreciated.

 

Thanks!

Hi please read Here

Share this post


Link to post
Share on other sites

Checking back in, with some good news -- did a fresh install of El Capitan 10.11, and using Mausi kext 2.0.2d3 -- everything works as expected. My previous issues with the kext not detecting the interface are no longer present. 

 

Seems as though a format and install did the trick, for me. I would suggest others having issues switching from the E1000e kext to this kext try that themselves as you never know what has been messed up in your system over time. 

 

Thanks for your hard work Mieze! 

Share this post


Link to post
Share on other sites

I've upgraded to 10.11 (El Cap) and the Mausi kext is mostly working well for me. Its having an issue that I used to have on Yosemite, which Mieze fixed for me by kindly providing a patch for my DSDT. Unfortunately that fix doesn't seem to be working on El Cap (or Clover is somehow messing up my newly patched DSDT) and my link is back to dropping out every so often.
 
I've had various disasters and annoyances over the last few days, I'm beginning to think I am just jinxed when it comes to hardware/software. (Seriously, just yesterday I tried to Reset Settings on my iPhone and it completely hung during the process which meant I had to put the phone in DFU mode and erase and re-install everything to it)
  

Hello, I'm back after being offline for the last 10 days due to a "technology upgrade" of my ISP.
 
Mieze

 
That sucks, hopefully they'll give you some compensation for that.

 

- Edit

 
 Argh, I can't even build IntelMausi for myself now. On El Cap with Xcode 7.01, BaseSDK set to latest, deployment target set to 10.11 (tried 10.9 as well), when I Build or try Product->Archive I get

 

 

The run destination My Mac is not valid for Archiving the scheme 'IntelMausiEthernet'.

 

Same if I switch the Scheme to IntelMausiEthernetV2

 

Seriously did I {censored} off some HW/SW God that I wasn't aware off? :(
 
- End Edit

Share this post


Link to post
Share on other sites

I spend a few days investigating the issue last month in order to get a better understanding of the cause and it looks like it's related to DMA latency tolerance reporting. Normally the PCIFamilyExpert takes care of initializing each component connected to the PCIe bus with the correct values for the platform, provided that the device uses the standard configuration registers for it, but the 82579, I217 and I218 use a non-standard mechanism to handle latency tolerance reporting so that the responsibility to setup the values is left to the driver. Unfortunately the code from the Linux driver which I used as a base for the driver doesn’t seem to match OS X’s requirements as the value seems to be platform and board specific.

 

Everybody still suffering from the "tx stalled" issue is asked to try the attached version, which adds more debug code. Please send me kernel logs including the driver's startup sequence in order to give me a starting point for a solution.

 

Good luck!

 

That sucks, hopefully they'll give you some compensation for that.

 

Well, not really because they didn't manage to resolve the issue until I terminated the contract but at least they tried to do their best in order to convince me to rethink my decision which is something I won't do because I already switched to another ISP. Obviously this is the only way to make them move.

 

Mieze

IntelMausiEthernet-V2.0.2d4.zip

Share this post


Link to post
Share on other sites

I spend a few days investigating the issue last month in order to get a better understanding of the cause and it looks like it's related to DMA latency tolerance reporting. Normally the PCIFamilyExpert takes care of initializing each component connected to the PCIe bus with the correct values for the platform, provided that the device uses the standard configuration registers for it, but the 82579, I217 and I218 use a non-standard mechanism to handle latency tolerance reporting so that the responsibility to setup the values is left to the driver. Unfortunately the code from the Linux driver which I used as a base for the driver doesn’t seem to match OS X’s requirements as the value seems to be platform and board specific.

 

Everybody still suffering from the "tx stalled" issue is asked to try the attached version, which adds more debug code. Please send me kernel logs including the driver's startup sequence in order to give me a starting point for a solution.

 

Good luck!

 

 

Well, not really because they didn't manage to resolve the issue until I terminated the contract but at least they tried to do their best in order to convince my to rethink my decision which is something I won't do because I already switched to another ISP. Obviously this is the only way to make them move.

 

Mieze

 

Cheers for continuing to investigate this Mieze, I've installed the driver and will post as soon as I have something. I've been trying to trigger it by shifting 12GB across the network at the same time as a TimeMachine backup but it hasn't done it yet.

 

It doesn't entirely surprise me your ISP didn't jump till you terminated. I've heard that is something needed for both Telekom and Kabel Deutschland to get off their ass and do their job. I've been debating switching from T to KD to get 100Mbps, but I've heard horror stories about both so I've not done anything about it yet.

 

For reference this is the debug data after booting up

07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: maxSnoop: 0x0846, maxNoSnoop: 0x0000.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: TCP/IPv4 segmentation offload enabled.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: TCP/IPv6 segmentation offload enabled.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: TCP/IPv6 checksum offload enabled.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: Version 2.0.2d4 using max interrupt rate 7000.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: intrThrValue=557
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: PCI power management capabilities: 0xc822.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: PME# from D3 (cold/hot) supported.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: I218V2 (Rev. 0) at 0x<ptr>, 78:24:af:8c:dc:af
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: MSI interrupt index: 1
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: kIOEthernetWakeOnMagicPacket added to filters.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: Already in power state 1.
07/10/2015 00:24:47.000 kernel[0]: Ethernet [IntelMausi]: No medium selected. Falling back to autonegotiation.
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: checkLinkStatus() returned 1.
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, Rx/Tx flow-control
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: CTRL=0x58180240
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: STATUS=0x00080083
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RCTL=0x04008002
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: PSRCTL=0x00040402
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: FCRTL=0x80005048
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: FCRTH=0x00005c20
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RDLEN(0)=0x00002000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RDTR=0x00000000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RADV=0x00000000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RXCSUM=0x00002300
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RFCTL=0x000380c0
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RAL(0)=0x8caf2478
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: RAH(0)=0x8000afdc
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: MRQC=0x00370001
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TARC(0)=0x0d800403
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TARC(1)=0x45000403
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TCTL=0x3103f0fa
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TADV=0x0000001c
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: TIDV=0x0000001c
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: MANC=0x00e20000
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: MANC2H=0x00000580
07/10/2015 00:24:51.000 kernel[0]: Ethernet [IntelMausi]: LTRV=0x88468846
07/10/2015 00:25:05.000 kernel[0]: Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
07/10/2015 00:32:22.000 kernel[0]: Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
07/10/2015 00:32:22.000 kernel[0]: Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
07/10/2015 00:32:22.000 kernel[0]: Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
07/10/2015 00:32:22.000 kernel[0]: Ethernet [IntelMausi]: replaceOrCopyPacket() failed.

Share this post


Link to post
Share on other sites

It doesn't entirely surprise me your ISP didn't jump till you terminated. I've heard that is something needed for both Telekom and Kabel Deutschland to get off their ass and do their job. I've been debating switching from T to KD to get 100Mbps, but I've heard horror stories about both so I've not done anything about it yet.

 

Thanks for the debug data.

 

Well, Telekom isn't that bad, at least for business customers like me but I wouldn't recommend Telefónica and their subsidiary companies like O2, in particular because of the "Zwangsrouter" which they failed to send me after the "technology upgrade". If they had given me the user name and the password for internet access, I would have used another DSL-modem I had laying around but they refused to.

 

Mieze

Share this post


Link to post
Share on other sites

I should mention I only experienced dropped connections with onboard ethernet over iSCSI but no other services (using intelmausi.kext), but it works with no dropouts with the sonnet pci card.

Share this post


Link to post
Share on other sites

Hi Mieze. It trigged yesterday when I wasn't paying attention and was barely doing anything with the network.

08/10/2015 12:18:09.000 kernel[0]: Ethernet [IntelMausi]: Check tx ring for progress. txNumFreeDesc=982
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: Tx stalled? Resetting chipset. txDirtyDescIndex=122, STATUS=0x00080083, TCTL=0x3103f0fa.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[102]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b5000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[103]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b6000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[104]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b7000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[105]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b8000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[106]: lower=0x24101000, upper=0x00000300, addr=0x000000001d815000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[107]: lower=0x24101000, upper=0x00000300, addr=0x000000001d816000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[108]: lower=0x24101000, upper=0x00000300, addr=0x000000001d817000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[109]: lower=0x24101000, upper=0x00000300, addr=0x000000001d818000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[110]: lower=0x24101000, upper=0x00000300, addr=0x000000001d970000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[111]: lower=0x24101000, upper=0x00000300, addr=0x000000001d971000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[112]: lower=0x24101000, upper=0x00000300, addr=0x000000001d972000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[113]: lower=0x24101000, upper=0x00000300, addr=0x000000001d973000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[114]: lower=0x24101000, upper=0x00000300, addr=0x000000001d829000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[115]: lower=0x24101000, upper=0x00000300, addr=0x000000001d82a000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[116]: lower=0x24101000, upper=0x00000300, addr=0x000000001d82b000, mbuf=0x0000000000000000, len=4096.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[117]: lower=0xad100e08, upper=0x00000301, addr=0x000000001d82c000, mbuf=0x0000000000000000, len=3720.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[118]: lower=0x27000178, upper=0x05a84200, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[119]: lower=0x26100042, upper=0x00000300, addr=0x000000001d33f3aa, mbuf=0x0000000000000000, len=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[120]: lower=0xad1000f8, upper=0x00000301, addr=0x000000001d82ce88, mbuf=0x0000000000000000, len=376.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[121]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[122]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3389aa, mbuf=0x<ptr>, len=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[123]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[124]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3ab8aa, mbuf=0x<ptr>, len=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[125]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[126]: lower=0xab100042, upper=0x00000300, addr=0x000000001d30d1aa, mbuf=0x<ptr>, len=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[127]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[128]: lower=0xab100042, upper=0x00000300, addr=0x000000001d308eaa, mbuf=0x<ptr>, len=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[129]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[130]: lower=0xab100056, upper=0x00000300, addr=0x000000001d3c56aa, mbuf=0x<ptr>, len=86.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: desc[131]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: packet size=66, header size=66.
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: MAC-header:  0x00 0x23 0xdf 0xa7 0xa6 0x84 0x78 0x24 0xaf 0x8c 0xdc 0xaf 0x08 0x00
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: IP-header:  0x45 0x20 0x00 0x34 0xe1 0xb4 0x40 0x00 0x40 0x06 0x00 0x00 0xc0 0xa8 0x00 0x26 0xc0 0xa8 0x00 0x03
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: TCP-Header / Data:  0xe6 0xa7 0x02 0x24 0x9d 0x89 0x0b 0x6e 0xf4 0x23 0x93 0x7a 0x80 0x10 0x7d 0x2d 0x81 0xa0 0x00 0x00 0x01 0x01 0x08 0x0a 0x3c 0xd6 0x6b 0xf8 0x9e 0xbb 0x2e 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34 0x34
08/10/2015 12:18:10.000 kernel[0]: Ethernet [IntelMausi]: Link down on en0
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: checkLinkStatus() returned 1.
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, Rx/Tx flow-control
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: CTRL=0x58180240
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: STATUS=0x00080083
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RCTL=0x04008002
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: PSRCTL=0x00040402
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: FCRTL=0x80005048
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: FCRTH=0x00005c20
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RDLEN(0)=0x00002000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RDTR=0x00000000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RADV=0x00000000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RXCSUM=0x00002300
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RFCTL=0x000380c0
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RAL(0)=0x8caf2478
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: RAH(0)=0x8000afdc
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: MRQC=0x00370001
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TARC(0)=0x0d800403
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TARC(1)=0x45000403
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TCTL=0x3103f0fa
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TADV=0x0000001c
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: TIDV=0x0000001c
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: MANC=0x00e20000
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: MANC2H=0x00000580
08/10/2015 12:18:13.000 kernel[0]: Ethernet [IntelMausi]: LTRV=0x88468846

Share this post


Link to post
Share on other sites

Hello Mieze.
I don't use your debug kext, but I can use it if you want some debug data from my Intel I218-V ethernet card (integrated in motherboard).

Do you want me to ?

Share this post


Link to post
Share on other sites

Some more instances that happened today. 

09/10/2015 12:44:57.000 kernel[0]: Ethernet [IntelMausi]: Check tx ring for progress. txNumFreeDesc=652
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: Tx stalled? Resetting chipset. txDirtyDescIndex=465, STATUS=0x00080083, TCTL=0x3103f0fa.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[445]: lower=0x24101000, upper=0x00000300, addr=0x000000001d821000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[446]: lower=0x24101000, upper=0x00000300, addr=0x000000001d822000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[447]: lower=0x24101000, upper=0x00000300, addr=0x000000001d823000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[448]: lower=0x24101000, upper=0x00000300, addr=0x000000001d824000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[449]: lower=0x24101000, upper=0x00000300, addr=0x000000001d7ed000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[450]: lower=0x24101000, upper=0x00000300, addr=0x000000001d7ee000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[451]: lower=0x24101000, upper=0x00000300, addr=0x000000001d7ef000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[452]: lower=0x24101000, upper=0x00000300, addr=0x000000001d7f0000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[453]: lower=0x24101000, upper=0x00000300, addr=0x000000001d815000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[454]: lower=0x24101000, upper=0x00000300, addr=0x000000001d816000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[455]: lower=0x24101000, upper=0x00000300, addr=0x000000001d817000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[456]: lower=0x24101000, upper=0x00000300, addr=0x000000001d818000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[457]: lower=0x24101000, upper=0x00000300, addr=0x000000001d99c000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[458]: lower=0x24101000, upper=0x00000300, addr=0x000000001d99d000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[459]: lower=0x24101000, upper=0x00000300, addr=0x000000001d99e000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[460]: lower=0xad100e08, upper=0x00000301, addr=0x000000001d99f000, mbuf=0x0000000000000000, len=3720.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[461]: lower=0x27000178, upper=0x05a84200, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[462]: lower=0x26100042, upper=0x00000300, addr=0x000000001d32d1aa, mbuf=0x0000000000000000, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[463]: lower=0xad1000f8, upper=0x00000301, addr=0x000000001d99fe88, mbuf=0x0000000000000000, len=376.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[464]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[465]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3cafaa, mbuf=0x<ptr>, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[466]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[467]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3112aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[468]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[469]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3cd0aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[470]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[471]: lower=0xab100042, upper=0x00000300, addr=0x000000001d33a4aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[472]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[473]: lower=0x20100042, upper=0x00000300, addr=0x000000001d3332aa, mbuf=0x0000000000000000, len=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: desc[474]: lower=0x20100010, upper=0x00000300, addr=0x000000001d3956a8, mbuf=0x0000000000000000, len=16.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: packet size=66, header size=66.
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: MAC-header:  0x00 0x23 0xdf 0xa7 0xa6 0x84 0x78 0x24 0xaf 0x8c 0xdc 0xaf 0x08 0x00
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: IP-header:  0x45 0x20 0x00 0x34 0x02 0x5d 0x40 0x00 0x40 0x06 0x00 0x00 0xc0 0xa8 0x00 0x26 0xc0 0xa8 0x00 0x03
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: TCP-Header / Data:  0xfc 0x7b 0x02 0x24 0x7e 0x7a 0x77 0x23 0x49 0xd2 0x96 0x69 0x80 0x10 0x7f 0xff 0x81 0xa0 0x00 0x00 0x01 0x01 0x08 0x0a 0x41 0xef 0x12 0x64 0xa3 0xf4 0xac 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9 0xa9
09/10/2015 12:44:58.000 kernel[0]: Ethernet [IntelMausi]: Link down on en0
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: checkLinkStatus() returned 1.
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, Rx/Tx flow-control
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: CTRL=0x58180240
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: STATUS=0x00080083
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RCTL=0x04008002
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: PSRCTL=0x00040402
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: FCRTL=0x80005048
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: FCRTH=0x00005c20
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RDLEN(0)=0x00002000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RDTR=0x00000000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RADV=0x00000000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RXCSUM=0x00002300
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RFCTL=0x000380c0
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RAL(0)=0x8caf2478
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: RAH(0)=0x8000afdc
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: MRQC=0x00370001
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TARC(0)=0x0d800403
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TARC(1)=0x45000403
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TCTL=0x3103f0fa
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TADV=0x0000001c
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: TIDV=0x0000001c
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: MANC=0x00e20000
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: MANC2H=0x00000580
09/10/2015 12:45:01.000 kernel[0]: Ethernet [IntelMausi]: LTRV=0x88468846
09/10/2015 12:48:02.000 kernel[0]: Ethernet [IntelMausi]: Check tx ring for progress. txNumFreeDesc=970
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: Tx stalled? Resetting chipset. txDirtyDescIndex=337, STATUS=0x00080083, TCTL=0x3103f0fa.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[317]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9a0000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[318]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9a1000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[319]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9a2000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[320]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9a3000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[321]: lower=0x24101000, upper=0x00000300, addr=0x000000001ce57000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[322]: lower=0x24101000, upper=0x00000300, addr=0x000000001ce58000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[323]: lower=0x24101000, upper=0x00000300, addr=0x000000001ce59000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[324]: lower=0x24101000, upper=0x00000300, addr=0x000000001ce5a000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[325]: lower=0x24101000, upper=0x00000300, addr=0x000000001d782000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[326]: lower=0x24101000, upper=0x00000300, addr=0x000000001d783000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[327]: lower=0x24101000, upper=0x00000300, addr=0x000000001d784000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[328]: lower=0x24101000, upper=0x00000300, addr=0x000000001d785000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[329]: lower=0x24101000, upper=0x00000300, addr=0x000000001d968000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[330]: lower=0x24101000, upper=0x00000300, addr=0x000000001d969000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[331]: lower=0x24101000, upper=0x00000300, addr=0x000000001d96a000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[332]: lower=0xad100e08, upper=0x00000301, addr=0x000000001d96b000, mbuf=0x0000000000000000, len=3720.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[333]: lower=0x27000178, upper=0x05a84200, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[334]: lower=0x26100042, upper=0x00000300, addr=0x000000001d3ad4aa, mbuf=0x0000000000000000, len=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[335]: lower=0xad1000f8, upper=0x00000301, addr=0x000000001d96be88, mbuf=0x0000000000000000, len=376.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[336]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[337]: lower=0xab100042, upper=0x00000300, addr=0x000000001d312faa, mbuf=0x<ptr>, len=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[338]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[339]: lower=0xab100042, upper=0x00000300, addr=0x000000001d20bcaa, mbuf=0x<ptr>, len=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[340]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[341]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3b99aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[342]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[343]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3960aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[344]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[345]: lower=0xab100056, upper=0x00000300, addr=0x000000001d22baaa, mbuf=0x<ptr>, len=86.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: desc[346]: lower=0x21000000, upper=0x00000000, addr=0x000046360000000e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: packet size=66, header size=66.
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: MAC-header:  0x00 0x23 0xdf 0xa7 0xa6 0x84 0x78 0x24 0xaf 0x8c 0xdc 0xaf 0x08 0x00
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: IP-header:  0x45 0x00 0x00 0x34 0x15 0x02 0x40 0x00 0x40 0x06 0x00 0x00 0xc0 0xa8 0x00 0x26 0xc0 0xa8 0x00 0x03
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: TCP-Header / Data:  0xcb 0x09 0x02 0x24 0xcb 0x81 0xfc 0x5f 0xea 0xe1 0xa4 0x41 0x80 0x10 0x0f 0xff 0x81 0xa0 0x00 0x00 0x01 0x01 0x08 0x0a 0x41 0xf1 0xb8 0x85 0xa3 0xf7 0x5d 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
09/10/2015 12:48:03.000 kernel[0]: Ethernet [IntelMausi]: Link down on en0
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: checkLinkStatus() returned 1.
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, Rx/Tx flow-control
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: CTRL=0x58180240
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: STATUS=0x00080083
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RCTL=0x04008002
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: PSRCTL=0x00040402
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: FCRTL=0x80005048
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: FCRTH=0x00005c20
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RDLEN(0)=0x00002000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RDTR=0x00000000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RADV=0x00000000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RXCSUM=0x00002300
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RFCTL=0x000380c0
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RAL(0)=0x8caf2478
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: RAH(0)=0x8000afdc
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: MRQC=0x00370001
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TARC(0)=0x0d800403
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TARC(1)=0x45000403
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TCTL=0x3103f0fa
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TADV=0x0000001c
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: TIDV=0x0000001c
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: MANC=0x00e20000
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: MANC2H=0x00000580
09/10/2015 12:48:06.000 kernel[0]: Ethernet [IntelMausi]: LTRV=0x88468846
09/10/2015 12:50:57.000 kernel[0]: Ethernet [IntelMausi]: Check tx ring for progress. txNumFreeDesc=647
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: Tx stalled? Resetting chipset. txDirtyDescIndex=6, STATUS=0x00080083, TCTL=0x3103f0fa.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1010]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b5000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1011]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b6000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1012]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b7000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1013]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8b8000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1014]: lower=0x24101000, upper=0x00000300, addr=0x000000001d792000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1015]: lower=0x24101000, upper=0x00000300, addr=0x000000001d793000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1016]: lower=0x24101000, upper=0x00000300, addr=0x000000001d794000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1017]: lower=0x24101000, upper=0x00000300, addr=0x000000001d795000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1018]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9bc000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1019]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9bd000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1020]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9be000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1021]: lower=0x24101000, upper=0x00000300, addr=0x000000001d9bf000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1022]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8a9000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1023]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8aa000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[0]: lower=0x24101000, upper=0x00000300, addr=0x000000001d8ab000, mbuf=0x0000000000000000, len=4096.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[1]: lower=0xad100e08, upper=0x00000301, addr=0x000000001d8ac000, mbuf=0x0000000000000000, len=3720.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[2]: lower=0x27000178, upper=0x05a84200, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[3]: lower=0x26100042, upper=0x00000300, addr=0x000000001d3a4baa, mbuf=0x0000000000000000, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[4]: lower=0xad1000f8, upper=0x00000301, addr=0x000000001d8ace88, mbuf=0x0000000000000000, len=376.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[5]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[6]: lower=0xab100042, upper=0x00000300, addr=0x000000001d3068aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[7]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[8]: lower=0xab100042, upper=0x00000300, addr=0x000000001d2299aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[9]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[10]: lower=0xab100042, upper=0x00000300, addr=0x000000001d2fadaa, mbuf=0x<ptr>, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[11]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[12]: lower=0xab100042, upper=0x00000300, addr=0x000000001d31c2aa, mbuf=0x<ptr>, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[13]: lower=0x23000000, upper=0x00000000, addr=0x000032220021180e, mbuf=0x0000000000000000, len=0.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[14]: lower=0x20100042, upper=0x00000300, addr=0x000000001d2f6faa, mbuf=0x0000000000000000, len=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: desc[15]: lower=0x20100010, upper=0x00000300, addr=0x000000001d342fa8, mbuf=0x0000000000000000, len=16.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: packet size=66, header size=66.
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: MAC-header:  0x00 0x23 0xdf 0xa7 0xa6 0x84 0x78 0x24 0xaf 0x8c 0xdc 0xaf 0x08 0x00
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: IP-header:  0x45 0x00 0x00 0x34 0x7a 0x90 0x40 0x00 0x40 0x06 0x00 0x00 0xc0 0xa8 0x00 0x26 0xc0 0xa8 0x00 0x03
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: TCP-Header / Data:  0xcc 0xf0 0x02 0x24 0xd8 0x3b 0x52 0x02 0x7f 0x4b 0x76 0x23 0x80 0x10 0x1d 0x13 0x81 0xa0 0x00 0x00 0x01 0x01 0x08 0x0a 0x41 0xf4 0x46 0xfd 0xa3 0xf9 0xf7 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc 0xfc
09/10/2015 12:50:58.000 kernel[0]: Ethernet [IntelMausi]: Link down on en0
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: checkLinkStatus() returned 1.
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, Rx/Tx flow-control
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: CTRL=0x58180240
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: STATUS=0x00080083
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RCTL=0x04008002
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: PSRCTL=0x00040402
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: FCRTL=0x80005048
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: FCRTH=0x00005c20
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RDLEN(0)=0x00002000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RDTR=0x00000000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RADV=0x00000000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RXCSUM=0x00002300
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RFCTL=0x000380c0
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RAL(0)=0x8caf2478
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: RAH(0)=0x8000afdc
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: MRQC=0x00370001
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TARC(0)=0x0d800403
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TARC(1)=0x45000403
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TCTL=0x3103f0fa
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TADV=0x0000001c
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: TIDV=0x0000001c
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: MANC=0x00e20000
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: MANC2H=0x00000580
09/10/2015 12:51:02.000 kernel[0]: Ethernet [IntelMausi]: LTRV=0x88468846

Share this post


Link to post
Share on other sites

Hello,

I installed your latest version, with more debug code.
Here what I got in the Console.

Every time I start a file transfer from my Synology, I see "replaceOrCopyPacket() failed." in the log.

Does it means something goes wrong ?

 

I hope it will help you.

10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: maxSnoop: 0x0846, maxNoSnoop: 0x0000.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: TCP/IPv4 segmentation offload enabled.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: TCP/IPv6 segmentation offload enabled.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: TCP/IPv6 checksum offload enabled.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: Version 2.0.2d4 using max interrupt rate 7000.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: intrThrValue=557
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: PCI power management capabilities: 0xc822.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: PME# from D3 (cold/hot) supported.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: I218V2 (Rev. 0) at 0x<ptr>, 44:8a:5b:9d:e9:d2
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: MSI interrupt index: 0
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: kIOEthernetWakeOnMagicPacket added to filters.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: Already in power state 1.
10/10/2015 08:56:59,000	kernel[0]	Ethernet [IntelMausi]: No medium selected. Falling back to autonegotiation.
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: checkLinkStatus() returned 1.
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: EEE mode = 0x0000, adv=0x0006, lpa=0x0000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: CTRL=0x40180240
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: CTRL_EXT=0x195a1007
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: STATUS=0x40080083
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RCTL=0x04008002
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: PSRCTL=0x00040402
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: FCRTL=0x80005048
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: FCRTH=0x00005c20
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RDLEN(0)=0x00002000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RDTR=0x00000000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RADV=0x00000000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RXCSUM=0x00002300
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RFCTL=0x000380c0
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RXDCTL(0)=0x00010000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RAL(0)=0x9d5b8a44
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: RAH(0)=0x8000d2e9
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: MRQC=0x00370001
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TARC(0)=0x0d800403
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TARC(1)=0x45000403
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TCTL=0x3103f0fa
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TXDCTL(0)=0x0141010f
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TXDCTL(1)=0x0141010f
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TADV=0x0000001c
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: TIDV=0x0000001c
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: MANC=0x00000000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: MANC2H=0x00000000
10/10/2015 08:57:02,000	kernel[0]	Ethernet [IntelMausi]: LTRV=0x88468846
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:25,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 08:59:26,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.
10/10/2015 09:03:51,000	kernel[0]	Ethernet [IntelMausi]: replaceOrCopyPacket() failed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By Angelo_
      Hi, I followed the rehabman guide (linked in the vanilla guide on the side of r/Hackintosh, not sure if I can link it) for laptops for my yoga 730ILW13 with an 8265u, Conexant 11870, 8gb of ram, 13.3" fhd and I found that upon booting the installer usb I get this weird issue where the screen displays what it should but the screen is incredibly dim (though it was off before using a flashlight on it) and it flashes every few seconds for a few milliseconds to the correct brightness, I used the plist for hd615-650 (including my 620), not quite sure what could be the culprit, first time hackintoshing a laptop so it might be a stupid brightness kext I forgot but didn't find any in that post or in this forum :c 
      Attached the clover zip so that anyone with more experience than me might give an idea in what could be a way to fix this.
      Thank you in advance 
       
       
       
      CLOVER.zip
    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

    • By Angelo_
      Just recently installed Mojave on my yoga 730(i5-8250u, 8gb of ram and 1080p 13.3" touchscreen) and got many features working, now the only issues are that my igpu is shown as only 7mb(and not metal capable, not sure whether it is or not) even tho I should've changed it from 5917 to 5916 (added both EFI folder and send me), the screen is shown as a 30.5" in system information and the cpu even tho I extracted the ssdt for it with ssdtPRGen.sh and appleintelinfo.kext to get low frequency info (ssdt was done with info 15,400,1600,3400 so it should go between 16-3400mhz and down to 400 in idle), idk what is wrong with my installation, can you guys help me or linke me something to fix those issues?
       
      Ps thunderbolt shows as no device found, is it regular for hackintoshes to be that way or do I need something for that too? Laptop has 2 tb3 ports as x4 pcie 3
      EFI.zip
      Send me Angeloss-MacBook-Pro.zip
    • By Gymnae
      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via AppleALC and native AppleHDA) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Community additions
      User @Panzerschiffe added a helpful post, altering this guide for user with AMD cards and not needing on-board sound.
      He also runs Mojave, which I don't run yet.
       
       
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
      25.6.18: Added update info
      28.8.18: Small changes for clarity, changed info for afps loading & updated USB patch for 13.6
      04.10.18: Update to Mojave will come once Mojave is more mature
      02.12.18: Removed unnecessary patches, fakepciid and audio patch method & linked to AMD post & added whatevergreen.kext as replacement for previous GPU kexts
      02.03.19: Removed unnecessary fakeid and ig_platform_id injections, ACPI patches - this is all handled by whatevergreen & lilu. In testing is a Framebuffer patch, see this post.
      04.03.19: Added Germany keyboard layout and updated pre-patched DSDT.aml removed DSDT patching
       
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options, leaving the others on default: 
       
      UEFI driver: AptioMemoryFix UEFI driver: ApfsDriverLoader UEFI booting only Install to ESP  
      You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces severe flicker. I'm now also testing 18,1 Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics
      Important:
      Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.
      Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext Whatevergreen.kext Lilu.kext AppleALC.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Enable CSM - This is sometimes needed to dual screens to work Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU (iGPU) to enable - not auto or disabled Set DMVT pre-alloc min to 64MB and max to 128MB. For this selection to appear you might need to reboot after setting iGPU to enable Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" to your new clover install.
       
      2.2 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.2.1 Edit DSDT
      No more need for manual DSDT patching. If you still do it, you might run into unstable sleep. SSDT hot-patching + sane clover.config edits are enough
       
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      EDIT: Since moving from F2 BIOS to F12 I did not repatch and sleep is still somewhat reliable. But to be 100% sure, you can still follow these steps.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.2.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.3 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.4 Enable onboard Audio - Install AppleALC kext
      Make sure your EFI partition is mounted and that you have a vanilla AppleHDA kext available. See below for a guide how to get a vanilla AppleHDA if needed
      Note: Our Audio codec is ALC887 and it's running with layout ID 1.
      Download the newest AppleALC kext from here and install it together with lilu.kext from here into your usual /clover/kexts/others location. Done. No scripts or config.plist patches necessary.
      Add layout ID 1 to config.plist, if it's not there yet:
      <key>Audio</key> <dict> <key>Inject</key> <integer>1</integer> <key>ResetHDA</key> <true/> </dict> If you previously  installed any  audio patches, please follow this guide to "vanilla-ize" your install.
       
      2.5 Optional steps for Graphics
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it. The detaisl are specific to your GPU and thus of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
      Whatevergreen.kext helps with Intel iGPU and NVIDIA dGPU fixes.
       
      At the moment I'm also testing out a special bootflag: 'shikigva=12' to enable faster rendering in Final Cut Pro X. Without whatevergreen.kext and a shikigva bootflag, rendering in final cut seem very slow.
       
      2.5.1 Framebuffers
      If you're facing problems with output from your internal GPU, you can try the framebuffer patches listed by @BackwardMac:
       
      2.6 Install a proper keyboard layout
      You might not be using a fancy Apple branded keyboard. If you use a PC keyboard, you might be annoyed by the differing layout and usage of keys. As a German, you might find yourself quitting applications, since alt gr + Q won't add an @, but quit your current application. To fix this, you can simply install a different keyboard layout. Copy it to /Library/Keyboard Layouts/ and chose the layout in System Preferences, Keyboard in the section "Other". Deleting the previously selecting layout makes sure that only this one is used. Nice little trick.
       
      A keyboard layout for German keyboards is attached and works wonders
       
      3. Updating
      Updating inside 10.3.x/ 10.4.x point updates doesn't require much attention:
      Download the update from the AppStore as any Mac would do Allow the system to reboot Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support. If using an Nvidia dGPU: Remove "nvda_drv=1"  from your boot arguments and disable Nvidia injection If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific) Boot into the newly created Install MacOS partition Repeat this process until the Install partition is gone Boot MacOS again, still following 3., and potentially install updated drivers Your Audio might require re-patching  
      4. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      5. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      @Panzerschiffe for his addition to this guide
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
       
       
       
      win-germany.keylayout
       
×