Recently Browsing 1 member
This project is dedicated to Lucy, my lovely little Tyrannofelis Rex.
LucyRTL8125Ethernet is an open source driver for the Realtek RTL8125 family of 2.5GBit Ethernet controllers.
Key Features of the Driver
Supports all versions of Realtek's RTL8125 2.5GBit Ethernet Controllers found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload over IPv4 and IPv6. Support for TCP/IPv4, UDP/IPv4, TCP/IPv6 and UDP/IPv6 checksum offload. Supports jumbo frames up to 9000 bytes (strongly recommended for 2.5GBit operation). Fully optimized for Catalina (doesn't work with Mojave and below). Note that older versions of macOS might not support 2.5GB Ethernet. Supports Wake on LAN (untested). Supports VLAN (untested). Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.
The driver has been tested successfully under Catalina (10.15.4 and above) and, according to first tests, is working stable. I haven't experienced any Kernel Panics during my tests and is working stable on my primary work machine. The driver has been designed to work with Catalina but might also work with Mojave, provided you build from source with Xcode 10.. Please keep in mind that support for 2.5GBit Ethernet was introduced in Mojave (or maybe High Sierra?) so that there is no way to make it work with Sierra or below.
Using autoselect medium it seems to prefer negotiating a connection speed of 1Gbit with my switch so that I had to select 2.5GBit/s manually in order to achieve this speed but it might be different with other switches. Installation
You might want to install the driver to /L/E as usual but it's also ok to use Clover's injection function (installation in the EFI folder). Use your favorite kext installation tool for installation or perform the installation manually (for Clover injection). It's your call!
Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.
Version 1.0.0d6 (2020-06-14) Fixed chip recognition. Version 1.0.0d3 (2020-04-20) First working development release.
Getting the driver
Source code can be found on GitHub: https://github.com/Mieze/LucyRTL8125Ethernet You'll find the lastest prebuilt binary (version 1.0.0d6) here in this thread (see this post https://www.insanelymac.com/forum/topic/343542-lucyrtl8125ethernetkext-for-realtek-rtl8125/?do=findComment&comment=2725790).
hello everyone, so my Intel HD 530 is not getting recognised by macOS. In the about my mac section, it shows as 'Display 7mb'
Im using HDMI connected to motherboard. I can only boot into os with 0x12345678 or 0x193b0005 as Fake Id and 0x19120000 as platform id with Mac17,1 as smbios. I do have the latest version of Lilu and WhateverGreen installed in boot loader and in L/E too.
I have looked through many forum posts, and have not found a solution yet.
edit: i forgot to change the smbios in the picture, I tried changing to 17,1 and restart, still no luck
If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app Installation --Create a bootable copy of El Capitan / Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/ --Install EL Capitan / Sierra / High Sierra and boot into system! Post Installation --Install Clover and replace with my folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/ --Reboot and activate video! Bingo! Now you need a fine tune! DSDT Time! My DSDT GA P35-DS3 DSDT.MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
Use Clover, check Generate P and C States
Install .app, select the required permission and reboot. Work in F1 / F2 keys!
*in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
Device HDEF + AppleAlc + Lilu
--install Lan driver by Mieze
-Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/ -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/ --Links -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/ -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others! We're all here to have fun and learn from each other! ENJOY!
So I have some less powerful hardware, that's why I'm installing High Sierra in 2020. Anyway, I'm trying to boot from the USB and I get the following errors:
00:000 00:000 OCB: Missing DMG signature, aborting 00:585 00:585 OCB: LoadImage failed - Unsupported That's it. The logs begin and end there. The rest of the file is zeroes.
Bootloader: OpenCore 0.5.9 Release
Note: I used SSDTTime to make the DSDT dumps for this exact computer
Intel Core i3 (Haswell)
An Intel VGA-Compatible Haswell iGPU
An nVidia Geforce 920m GPU (part of the reason for installing High Sierra)
USB: Intel 8 Series USB xHCI HC
SATA: Intel 8 series SATA Controller
If you need more details, here's my laptop https://www.asus.com/Laptops/X540LJ/ . I have the 512GB version with 4GB of RAM
I found a lot of forum posts about people having the same error, except nothing solved mine. Also, I haven't found anything online about the error with the Missing DMG Signature.
EDIT: If anybody needs my config.plist, feel free to ask for it and I'll happily post it
By Yosa Tristian
Can someone help me?
When I turn on the USB Wireless Adapter (Wifi Dongle), my mouse is lagging (like quick ejecting & rejecting).
When I turn off the Wifi Dongle, my mouse runs smooth again.
Mouse: Fantech G13 Rhasta II
Wifi Dongle: TPLink TL-WN725N
Wifi Dongle Driver : https://github.com/chris1111/Wireless-USB-Adapter
And if you don't mind, can you check my hackintosh configuration? maybe something isn't right yet
Send me Yosas-MacBook-Pro.zip