Jump to content
Sign in to follow this  
Followers 0
xxexxa

Instalacao Yosemite 10.10.1 - Reboot Apos Carregar todos Kext

3 posts in this topic

Recommended Posts

Ola pessoal, espero nao estar infringindo nenhuma regra do forum. Estou tentando instalar o Yosemite 10.10.1 em meu notebook porem ja tentei muita coisa e o mesmo problema persiste. Estou a dias pesquisando sem sucesso. Ao dar boot e carregar todas Kext aparece os dizeres: "Starting darwin x86_64" e antes de carregar a tela com a logo da apple reinicia.

 

Segue minha configuracao de notebook:

Core 2 Duo T9600 2.6GHZ com 6mb de cache (GM965/GML960/GL960)

bus speed 740mhz

audio intel

rede broadcom 5701

4GB memoria ddr2

Sata ICH-8M AHCI

Video Nvidia 8600m GT 512mb PCi-e no Slot-1

 

Atualmente roda o Lion 10.7.2 em 64bits com o kernel Darwin 11.2.0 e chamaleon

 

Possui uma bios Phoenix bastante limitada, as unicas opcoes existentes e que posso configurar sao AHCI, e USBLegacy. Ja tentei com ambas habilitadas ou desabilitadas. Nao tem XD ou Hpet como na bios. Bios normal (legacy) nao e bios UEFI

 

Algumas tentativas sem sucesso:

-Ja tentei dar boot pelo usb e pelo dvd

-Ja desativei e removi perifericos USB, ja removi bateria, ate a placa de rede wireless

-Ja criei um boot com o yosemite direto do download do site da Apple com o [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

-Tambem ja tentei usar Distros como Niresh e Iatkos

-Ja tentei com hd, sem hd, com hd sata normal, com hd sata ssd

-Baixei uns 6 kernels diferentes, e ate modifiquei o kernel original com as linhas do haswell

-ja dei boot com o pendrive deixando ele como primeiro a ser carregado na bios

 

O problema acontece em todas as situacoes. Ja usei todas as flags abaixo combinadas de todas as maneiras imaginaveis:

npci=0x2000

npci=0x3000

ForceHpet=Yes (tambem com No)

GraphicsEnabler=Yes (tambem com No)

PciRootUID e PciRoot (com 0 e 1)

-v -x -f (combinadas ou sozinhas, de varias maneiras)

cpus=1 (e =0)

busratio= (16, 20, 22, 33)

Vbios=Yes

Smbiosdefaults=no

USBFix

XPMC-FREE

dart=0

USBLegacyOff= (Yes e No)

DropSSDT e DSDT=0

nv_disable=1

kext-dev-mode=1

RestartFix=Yes

UserKernelCache=No

nvda_drv=1

nem em Single User -s ele entra, pois tambem reinicia antes

 

Ja criei um DSDT no lion e tentei bootar com o chamaleon nada mudou. O lion e a unica versao que instala, tentei depois o Mountain Lion, o Mavericks e agora o Yosemite, todos apresentam o mesmo problema desse topico de reiniciar apos carregar as Kext.

 

Em anexo as informacoes completas do meu hardware

 

Gostaria se possivel que alguem me ajude pois nao esta facil, se esgotaram minhas alternativas. Obrigado.

Mac Pro.rtf

Share this post


Link to post
Share on other sites
Advertisement

Deve ser o NX bit no BIOS. Verifique se não está com outro nome (Execute Disable Bit, XD bit).

 

http://olarila.com/forum/viewtopic.php?f=2&t=1804

Ola amigo, infelizmente a bios nao possui muitas opcoes, apenas AHCI e LegacyUSB. Sera que existe alguma Flag ou algum Kext para suprir essa necessidade?

 

Funcionou. Baixei uma atualização não oficial da minha Bios que tem a opção Execute Disable Bit. Obrigado pela ajuda.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By iTahaMe
      FINALLY IT'S WORKING THANKS TO @insanelymac
      But i have a single problem, My graphic card Radeon x1950 Pro not working, It used to work good on Snow Leopard but now its not on Yosemite i don't know why ... any kext needed ??
       
      Here the kext used to work good for me on Snow Leopard
      ATIRadeonx1000.kext 
      ATINDRV.Kext
      ATIRNDRV.Kext
       
       
      Any Help ? 
      Taha

    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
       
    • By bobso
      hi I have this build:
       
      - AMD Athlon X4 631
      - ASRock A75M-HVS (link)
      - AMD HD 6670
      - 8GB DDR3
      - 250GB HDD
       
      Which version of MacOS can I install?
      Which kernel?
    • By Ezioaditore
      Need help.. I am unable to boot in my yosemite.. Its giving mach_kernel not found
×