Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By Mieze
      This project is dedicated to Lucy, my lovely little Tyrannofelis Rex. 

      LucyRTL8125Ethernet is an open source driver for the Realtek RTL8125 family of 2.5GBit Ethernet controllers.
      Key Features of the Driver
      Supports all versions of Realtek's RTL8125 2.5GBit Ethernet Controllers found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload over IPv4 and IPv6. Support for TCP/IPv4, UDP/IPv4, TCP/IPv6 and UDP/IPv6 checksum offload. Supports jumbo frames up to 9000 bytes (strongly recommended for 2.5GBit operation). Fully optimized for Catalina (doesn't work with Mojave and below). Note that older versions of macOS might not support 2.5GB Ethernet. Supports Wake on LAN (untested). Supports VLAN (untested). Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully under Catalina (10.15.4 and above) and, according to first tests, is working stable. I haven't experienced any Kernel Panics during my tests and is working stable on my primary work machine. The driver has been designed to work with Catalina but might also work with Mojave, provided you build from source with Xcode 10.. Please keep in mind that support for 2.5GBit Ethernet was introduced in Mojave (or maybe High Sierra?) so that there is no way to make it work with Sierra or below.  
      Known Issues
      Using autoselect medium it seems to prefer negotiating a connection speed of 1Gbit with my switch so that I had to select 2.5GBit/s manually in order to achieve this speed but it might be different with other switches.   Installation
      You might want to install the driver to /L/E as usual but it's also ok to use Clover's injection function (installation in the EFI folder). Use your favorite kext installation tool for installation or perform the installation manually (for Clover injection). It's your call!  
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      Version 1.0.0d6 (2020-06-14) Fixed chip recognition. Version 1.0.0d3 (2020-04-20) First working development release.  
      Getting the driver
      Source code can be found on GitHub: https://github.com/Mieze/LucyRTL8125Ethernet You'll find the lastest prebuilt binary here in this thread (see below).  
    • By k.panic
      Ciao ragazzi,
      ho provato ad eseguire l'installer di Yosemite su un
      Asrock H110 BTC+
      Intel G3900 (con FakeCPUID 0x0306A0 e flag -xcpm)
      GeForce 710
      ma dopo aver raggiunto lo step di "bluetooth transport" mi dà il simbolo del divieto d'accesso.. Cosa sbaglio?
    • By Hervé
      Recompiled v2.3.6 sources in fat-binary mode (Xcode 3.2.6, SDK 10.6, Target OS X 10.6). Fully supported in 32bit and/or 64bit mode under all OS X/macOS versions from Mac OS X Snow Leopard 10.6 to macOS Catalina 10.15.
      Tested on Dell Latitude D630 and D830, both fitted with Broadcom BCM5755M Gigabit Ethernet cards (14e4:1673).
      Nov 16th, 2018: updated description to confirm support up to macOS Mojave 10.14 Jan 11th, 2019: updated description to confirm support up to macOS Catalina 10.15  
    • By Alex009988
      The driver with fix and works under  intense traffic
      It work with for all system from Snow Leopard to Catalina.
      { DEVICEID_BCM5722, "BCM5722 NetXtreme Server Gigabit Ethernet" },{ DEVICEID_BCM5754, "BCM5754 NetXtreme Gigabit Ethernet" },{ DEVICEID_BCM5754M, "BCM5754M NetXtreme Gigabit Ethernet" },{ DEVICEID_BCM5755, "BCM5755 NetXtreme Gigabit Ethernet" },{ DEVICEID_BCM5755M, "BCM5755M NetXtreme Gigabit Ethernet" },{ DEVICEID_BCM5787, "BCM5787 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5787M, "BCM5787M NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5906, "BCM5906 NetLink (TM) Fast Ethernet" },{ DEVICEID_BCM5906M, "BCM5906M NetLink (TM) Fast Ethernet" },{ DEVICEID_BCM57788, "BCM57788 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5784, "BCM5784 NetLink Gigabit Ethernet" },{ DEVICEID_BCM57785, "BCM57785 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM57781, "BCM57781 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM57780, "BCM57780 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5752, "BCM5752 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5761, "BCM5761 NetLink (TM) Gigabit Ethernet" },{ DEVICEID_BCM5761E, "BCM5761E NetLink (TM) Gigabit Ethernet" },   #define DEVICEID_BCM5722 0x165A#define DEVICEID_BCM5754 0x167A#define DEVICEID_BCM5754M 0x1672#define DEVICEID_BCM5755 0x167B#define DEVICEID_BCM5755M 0x1673#define DEVICEID_BCM5787 0x169B#define DEVICEID_BCM5787M 0x1693#define DEVICEID_BCM5906 0x1712#define DEVICEID_BCM5906M 0x1713#define DEVICEID_BCM57788 0x1691#define DEVICEID_BCM5784 0x1698#define DEVICEID_BCM57785 0x16b5#define DEVICEID_BCM57781 0x16b1#define DEVICEID_BCM57780 0x1692#define DEVICEID_BCM5752 0x1600#define DEVICEID_BCM5761 0x1681#define DEVICEID_BCM5761E 0x1680   If you find extra issues, please tell about it here
      Cosmetic of DSDT and posible problems with "Built IN"
    • By JVMod
      I have to work with macOS, but I don't have any Mac computer. I use Windows. I also try to install in a virtual machine and it's very lagging, I can't work with that. So, I decided to install a Hackintosh on my HP Laptop. I chose Niresh Hackintosh Catalina version. When I booting up, it failed to boot and auto-restart my laptop. I think this error is from config file in clover bootloader. I tried to re-edit configuration file but it's not working. I need your help. Can you help me check my clover EFI folder, please? Sorry, I'm new to Hackintosh.
      My hardware: HP Notebook 15s-du..., Intel Core i3 7020U KabyLake, Intel HD 620, Western Digital SSD - Windows dual boot Ubuntu, no Nvidia or AMD driver.