Jump to content
  1. verleihnix

    verleihnix

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By soumaxetuirk
      If you have a working Brightness Slider and you might be using Brightness slider or manual hotkeys to control brightness then this guide may help you to use your Native hotkeys of laptop.
       
      (All the Credits goes to @RehabMan     For OS-X-ACPI-Debug Kext and DSDT Patches.)
       
       
      This step assumes that you are using RehabMan's VoodooPS2Controller
      Install the kext: https://github.com/RehabMan/OS-X-ACPI-Debug Open MaciASL and click on patch.(Add rehab man repo) Apply "Add DSDT Debug Methods" and "Instrument EC Queries" that are under Brightness Fix. Save the DSDT and restart Look in Syslog as you press the key corresponding to brightness to determine which _QXX methods handle the keys (UPDATE: From Sierra Apple changed logging process. So you won't find ACPIdebug result using syslog command. Instead use following command )
      log show --last 5 | grep ACPIDebug 6. Then patch DSDT:
      into method label _Q1D replace_content begin // Brightness Down\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0205)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0285)\n end; into method label _Q1C replace_content begin // Brightness Up\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0206)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0286)\n end; Change the variable _Q1D/_Q1C as per the log. 

      7. Try compiling and check if it generates errors
      8. If it does, then change the PS2M to PS2X according to the one found in your DSDT
      9. Save and place the compiled DSDT.
      10. Now you should see that you have your corresponding keys to change your brightness 
       
       
       FOR  more detail and Queries,Check Out original Post of @RehabMan Here;
      http://www.insanelym...18#entry1997112
      Get Latest Version of  OS-X-ACPI-Debug kext here:
      https://bitbucket.org/RehabMan/os-x-acpi-debug/downloads
    • By DerNuntius
      Hi,
       
      Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
       
      Thank you for helping.
      Greedings,
      Hugo
       
       
      CLOVER.zip
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×