Jump to content
ggzz

Help patch Asus S56CM

13 posts in this topic

Recommended Posts

I recently managed to install Mavericks 10.9.5 on my Asus S56CM-DH71-CA  http://www.asus.com/Notebooks_Ultrabooks/S56CM/specifications/

 

Graphics cards:

- GeForce GT 635M

- Intel HD 4000

 

 

Wifi-cards:

- Atheros AR9485 (Original card)

- Atheros AR5B195 (AR9285) - Card I replaced it with.

 

Audio-card:

- Realtek ALC270

 

Chipset & CPU:

- Intel HM76 Express

- Intel I7-3517U

 

Motherboard Ver:

 - K56CM

 

 

In order to get it out of safe-mode, I deleted all the ATI, AMD, GeForce, IntelHD (except the 4000), Nvidia, kexts. I also deleted the turbo boost kext and the apple ps2 controller + élan touchpad kext.

 

I installed a kext for the mouse and keyboard and it works. I extracted my DSDT (clean) below. Anyone have any patches for it or can help me patch it? I found some DSDTs online for Mountain Lion and the K56CM model and I used those and parts of it work (Audio did not, Wifi did not). Wifi doesn't work out of the box but works with the DSDTs I found online. Audio works with Voodoo HDA but it doesn't detect when I plug the earphones in so I have to manually switch the output from speakers to earphones. I'd prefer to have DSDTs for my model and mono.

 

Anyone can help me? I'm really new but I read that DSTDs will help me.

DSDT.dsl.zip

Share this post


Link to post
Share on other sites
Advertisement

Reply with IOReg copy.

 

I applied your DSDT, rebooted, opened IORegExplorer and then clicked save. Hopefully I did that right. I had to remove the DSDT after and replace it with the old one to be able to post this (because wifi).

IOReg.zip

Share this post


Link to post
Share on other sites

Try it...

 

Okay. I used only this dsdt.aml file. I didn't use the SSDT files or anything else.

 

 

It works a bit. The wifi works with this, the audio still works (still using VoodooHDA). The brightness stopped (it's at max now). The volume keys work.

Share this post


Link to post
Share on other sites

Check if your nvidia graphics is disabled (System info).

 

Yup. Disabled. My previous post was wrong. I was pressing the wrong button for brightness (I'm a noob.. Can't get used to the Apple keyboard layout yet). I did some checking and it detects the wifi card as AR9300 instead of AR9285 but no biggie, it perfectly fine.

The keyboard works perfectly.

The touchpad works (though a bit glitch as before.. still have 3 & 4 finger recognition and scrolling so that's good).

It detects all 6GB of ram.

Detects the right CPU speed.

It uses the IntelHD4000.

 

Everything is right.. The only problem is the audio. I am using the VoodooHDA kext. Audio AND speakers work but it never detects whenever I plug in the earphones. I have to go to system preferences and switch to the headphones under the output section.

 

Any ideas?

Share this post


Link to post
Share on other sites

Good, now you have to patch your AppleHDA and remove the crappy VoodooHDA, refer to Mirone's guide for that.

http://www.insanelymac.com/forum/topic/295001-guide-to-patch-applehda-for-your-codec/

 

 

Hey. I patched the Audio. Can you tell me how you patched my wifi and all the other stuff? What code did you use? It works but I want to know how and why. I try to do myself but it didn't work. I extract SSDT's from Windows and move them to mac and try to compile and they give errors. How did you do it? Is there a way for me to compare stuff like this?

 

I want to know because I want to try and patch Sleep and wake which doesn't work for some reason.

Share this post


Link to post
Share on other sites

hi ?, can help me ???, i'm using ALC270 for audio. more headphone into the audio jack doesnt work

 

https://github.com/Brandon-T/S56CM-K56CM-MB/tree/master/ALC270%20Info

https://github.com/Brandon-T/S56CM-K56CM-MB/tree/master/Yosemite%2010.10.2/Clover%20EFI%20r3185/System/Library/Extensions

 

That is where I uploaded all the patch files for this specific laptop. That ALC270 AppleHDA Kext should work for Yosemite. I have not tried Sierra as the laptop that I had died a year ago.

 

 

Are you using the same laptop? What MacOS or OSX version are you using?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
    • By jamesxxx1997
      Hi everyone~
      Now using mojave 10.14.4 , I am patching my dsdt and ssdt but have four syntax error with my dsdt.dsl , and I don't know how to fix it.
       
      My specs:
      lenovo thinkpad x1 yoga 3rd
      CPU : i7-8550u
      graphics : uhd620
       
      The file of my dsdt and ssdt , ioreg , and my efi is in this link:https://drive.google.com/drive/folders/1T1nv1QgqDtczXrohdlQUJ_8O-kPpoSEf?usp=sharing
       
      thanks!
    • By bcuraboy3
      Good morning everyone. I have a HP Pavillion with the following specs
      I have managed to install MOjave on it, using Rehabman's config for Intel HD5500. 
      But I need some help with a DSDT for it.
      Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
      and help me with a good DSDT patched and a correct config.plist for it?   
      Thank you very much.  Highly appreciated 
      I have also included a report from Aida64 in case anyone needs it 
       
      15-p200np
       
      Número do equipamento
      L5Z67EA
      Microprocessador
      Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
      Memória
      SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
      Placa de vídeo
      NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >>  disabled already using the config.plist provided 
      Disco rígido
      SATA 1 TB 5400 rpm
      Unidade multimédia
      Gravador de DVD SuperMulti
      Visor
      HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
      Placa de rede
      Ethernet LAN Base-T 10/100 integrada
      Conectividade sem fio
      Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way 
      Som
      BeatsAudio com 2 altifalantes >>  it's a ALC 290 
      Teclado
      Tamanho completo tipo ilha com teclado numérico
      Dispositivo
      HP Imagepad com suporte de gestos multi-toque
      Portas externas
      1 leitor de cartões multimédia SD multi-formato
      1 HDMI
      1 combinação auscultadores/microfone
      1 USB 2.0
      2 USB 3.0
      1 RJ-45
      Dimensões
      38,45 x 26,02 x 2,39 cm
      Peso
      2,27 kg
      Alimentação
      Transformador de alimentação CA de 65 W
      Polímero de iões de lítio 4 cél. 41 Wh
      Câmara
      Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
      Mac-Pro-Noi.zip
      Report.htm
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×