Trying to use both the Kext Updater tool and Clover Configurator, I'm having trouble with installing the latest version of Clover so that I can update to 14.1.3.
When I run the check to see if there are any new versions, I find that I am running 4820 and the newest version is 4871. So I run the installer, check off what I want to install, the install goes and says it's completed successfully. Upon reboot though, I see that I'm still on version 4820. The weird thing that I've noticed is that when I'm running the installer, it completely skips over the destination selection and there's no way for me to go back and select my HD. I have two drives that are fused together... could it be that it's installing it but to the wrong location? It's probably also worth noting that I've tried using both the Package and CLOVERX64 radial button in CC. Neither seem to do the trick.
I've also tried manually downloading the clover.pkg from Sourceforge and manually installing it and I encounter the same issue.
I have a lenovo laptop with pentium 2020M 2.4ghz with 4gb ddr3 ram intel graphics and 500gb wd hdd i wanted to install hackintosh on my pentium for editing purposes beacuse windows sucks so can you please tell me how can i install it and which version should i install
And, well, I bought a new computer with the following build:
ASRock H310M-G/M.2 motherboard
Intel Core i5 8400 2.8ghz
EVGA GeForce GTX 1060 6gb
16gb RAM 2400mhz HyperX
SSD Kingston a1000 m.2 240gb
I had a problem with "Still waiting for root device" when I was trying to boot the USB Install Disk I made. I managed to boot the installation using the USBInjectAll.kext and PMHeart's patch on config.plist.
After that, I proceeded and formatted the 500gb HDD to install 10.13.6 on it. It starts copying the installation files to the HDD with a message poiting 5 minutes left. Then, on 2 minutes left, the installation freezes for a couple os seconds then it reboots. Did that again on verbose mode, it gave me this message:
After it reboots, I booted the USB Install Disk again and used it to boot the 500gb HDD to continue the installation. After it boots, it starts the installation with a message saying 22 minutes left and, less than 1 minute later, I get a panic with this message on verbose:
When I boot again, the installation continues to the point that says that it can't be installed. Well, I don't know what to do anymore. I've tried a bunch of stuff and nothing worked so far. Do you guys have any tips? Thank you in advance.
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides to you simplicity and flexybility, and lets you to avoid most of the steps needed with every other app.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is if you want to use it on a real Mac.
- Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
- It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
- You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
- Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
- 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
- Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
- Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
- No need to use Disk Utility. TINU can format your drive or partition for you.
- Integrated EFI partition mounter tool.
- Uses recent, modern, APIs and SDKs and the Swift 3 language.
- Transparent graphics style available (type alt-S or choose from the menu bar: View -> Use transparent style).
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
- Offers advanced features to customize your bootable macOS installer.
Features that are planned for future versions:
- Install and configure [Clover](https://sourceforge.net/projects/cloverefiboot/).
- Install kexts into Clover's kexts folder.
- Clover drivers customization
- Use custom DSDT in Clover
- Integrated pre-made Clover config templates database from a remote and open repository.
- Support for other languages, at least Italian.
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
- A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
Thread (english) on insanelymac.com:
Thread (italian) on insanelymac.com:
Thread (english-german) on hackintosh-forum.de:
Post on Reddit:
Facebook hackintosh help and beta testing (Italian only):
Contact me (project creator):
- Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
- email: email@example.com
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license
- I (project creator) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- I (project creator) do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be, don't use source code from this project to create apps or software for that aim.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Thomas Tempelmann for help with the UI
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project