Jump to content
vhj1995

[Guide] Mac OS X 10.7.2 Lion on Lenovo G570 (iATKOS L2)

1 post in this topic

Recommended Posts

Installing Apple Mac OS X 10.7.2 Lion (iATKOS L2)

 

ON Lenovo G570

 

 

For Installing Apple Mac OS X OS 10.7.2 Lion ported by iATKOS Team. Codename for This Distro : iATKOS L2. Now I experiment that on my Lenovo G570 and it works 99% expect Wifi and AMD Readon 6370M GFX.

 


Lenovo G570 Specs:

-Intel i3-2350M 2.3 GHz [2nd Gen]

-4GB DDR Ram

-500 GB WD HDD

-Intel HD Graphics 3000 + AMD Readon 6370M @750Mhz 1GB

 

 

Working:

-Almost Everyting.

 

Not Working:

-Wifi

-AMD Readon 6370M [Although you don’t need to be work it cuz you ain’t gonna gaming on OSX]

 

Procedure:

1. Get iATKOS L2 from iatkos.me

2.Make Bootable USB for Installing OSX Lion [iATKOS L2]

 

 


- VBOX Method:

           Download Chameleon Bootloader

           Create a New Virtual Machine.

Spec:

OS: Mac OSX Server

Version: Mac OSX Server 64bit

Ram: 2048 or 1024 MB

HDD: VDI – 20 GB

Setting, Turn off “EFI Boot”

Graphics: 128 MB w/ Enable 3D Acceleration

 

1. Start VM, Press Next. Locate & Select .dmg of iATKOS L2.

2. It should start booting. Then press enter or any key. And just install it to mac

[PS. You need to format VM HDD to HFS+ via Utility> Disk Utility> Drive > Erase> Select HFS Mac OS and Erase it, go back and select drive]

4. After Installation Completes in VM , it will start OSX

           5. Plug in Thumb Drive and Copy chameleon bootloader zip and iatkos_l2.dmg

           6. Go back to VM and select Devices > USB “your flash drive name”

           7. Go> Computer> Copy files from flash drive to your desktop.

           8. Get Back to Desktop, Open .dmg with Disk Utility.. press skip.

 Select you Flash Drive and drag to destination in blank box of restore tab. Press restore.

9. After Restoration finishes, Close Disk Utility. Open Chimera 1.6.0.zip and then start Chimera 1.6.0 and go through process, just press “Change Destination Location” and select your flash drive. And finish the process.

 

 

 

Here your VM’s Mac work is done. Now you don’t need it.

 

3. Boot Up from USB.

4. Select iATKOS L2

5. Go through process. [DON’T CUSTOMISE SETUP] for partitioning use Disk Utility to format [Erase] to HFS+

6. After Installation. Again bootup from USB and Start Setup. Then go to Utility > Terminal.

 

Now ,  Perform Following Operations.


cd “Volumes/Your HDD Name”

cd System

cd Library

cd Extensions

 

rm -rf  AppleIntelGMA*

rm -rf AppleIntelHD3000*

rm -rf  AppleIntelHDGraphics*

rm -rf  AppleIntelSNBGraphicsFB.kext

rm -rf  AppleIntelIntegratedFramebuffer.kext

rm -rf  AppleIntelSNBVA.bundle

rm -rf  ATI*

rm -rf  GeForce*

rm -rf  NVDANV*

chown -R root:wheel  *

chmod -R 755  *

 

 

7. Now boot from USB and Select iATKOS L2 from HDD [NOT THE SETUP]

8. Plugin USB Keyboard and USB Mouse.

9. Go through process you will get to desktop.

10. Get kexts and install particular drivers for Network, PS/2 Support, Voodoo HD Sound and bootloader. System Specification MacBook Pro 8,1.

11. Install Intel 3000’s Kexts via Kext beast. [zip attached]

12. Now it’s done, boot using command “-v GraphicsEnabler=No”

 

Enjoy!

Guide By vhj1995.

my intel hd3000.zip

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nysander
      I start this topic to make my Lenovo Thinkpad W540 usable with High Sierra
       
      I followed many guides but this one started by @tluck made me most progress: 
      My setup as in signature
       
      I will update first post with statuses of working features:
       
      Graphics:
      Nvidia Quadro - disabled
      Intel HD 4600 - working @ 1920x1080 and 1,5GB RAM (had to set ig-plaform-id as Haswell desktop, mobile do not work)
      using intelGraphicsFixUp.kext
       
      Sound:
      internal speakers and mic works with AppleACL.kext and profile 28

      USB:
      i boot MacOS from USB drive and it works, mouse and pendrive also works
      USB power not work yet, so USB WiFi dongle and iPhone connection not work (no power @ USB)
      IOReq finds only USB 3.0 controller not USB 2.0 even though I have 2 ports USB 3.0 and 2 ports USB 2.0
       
       
      Integrated Camera:
      recognised in IOReq but not working now (probably due to USB)
       
      Bluetooth:
      as USB but works without problem

      Ethernet:
      works with intelMausiEthernet.kext

      Keyboard:
      internal is PS2 so VoodooPS2Controller.kext is needed - some mappings I would like to have different but works

      Touchpad:
      works with VoodooPS2Controller.kext from @tluck topic
       
      Trackpoint:
      One time works mostly not - debugging in progress
       
      Batery Status:
      not working
       
      Integrated WiFi:
      intel -  not working
       
      Sleep / Hibernate:
      not working
       
      Backlight:
      not working
       
      Other found issues:
      besides that graphics works @ 1920x1080 and have a lots of ram window shadows (especially dock shadow) looks bad
       
      External VGA:
      not tested yet
       
      External Mini Display Port / Thunderbolt:
      not tested yet
       
      I will post my clover / debug config later
       
       
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Release v2018.06.05 on GitHub Updated to Clover r4513 Updated Lilu.kext - supports both Sierra and High Sierra Updated AppleALC.kext - supports both Sierra and High Sierra + added back DVMT patch for 10.13.2+ Updated VoodooPS2Controller.kext (RehabMan version) + SSDT updates for T460 Added Frank's T470p DSDT files
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By TheMiningSheep
      Olá gente. Já faz um tempo que eu venho pesquisando sobre o Hackintosh e a obsessão só vem crescendo. 
       
      Li muita coisa mas ainda não tenho total certeza em como fazer o processo. Meu notebook é um Lenovo G40-80, gostaria da opinião de vocês se realmente é aconselhável fazer, se rodaria legal e coisas assim.
       
      System Info está aqui (https://i.imgur.com/4EMTdRc.png) 
       
      Já sei como criar o pendrive bootavel e que minha placa de rede não é compatível, usarei um adaptador usb até a outra chegar. O que eu mais venho duvida é sobre pós-instalação e sobre quais kexts devo usar.
      Caso for possível o hack, farei um tutorial exclusivo para quem tem essa maquina e está sofrendo também. 
       
      Agradeceria muito as vossas ajudas. 
       
    • By vesting
      Hello,
      I own a Lenovo Thinkpad T520 with this hardware:
      CPU: Intel Core i5-2520M 2.50 GHz
      Motherboard: Lenovo 4242Y13 Chipset Intel sandy bridge
      RAM: 8Gb DDR3 dual channel
      Graphics: Intel HD Graphics 3000
      Storage: 320 Gb HDD 7200 rpm.
      Wireless Card: Intel 82579LM Gbit network connection
      Trackpad.
      Ports:
       - 2 USB 2.0  - 1 USB 3.0  - 1 VGA  - 1 Card reader  - 1 Ethernet Is it Hackintosh compatible? I would like to install High Sierra, or at least El Capitan. I read that someone made it following the T410's guide, but they had the i7 version of the T520 with NVidia graphics. can you help me please?
      Thank you for your time.
       
    • By jojo2203
      Hallo,
      habe versucht nach der Anleitung von http://x220.mcdonnelltech.com/  auf einen X220 i7 zu installieren, bisher leider erfolglos. kann mir jemand die angehangenen Log Meldungen interpretieren und einen Tip geben an welcher Stelle ich weiter probieren muss. Habe es schon mit den folgenden Bootparametern probiert
      -v -x -s -f cpus=1 maxmem=4096 GraphicsEnabler=No -no-zp
      Es war ein 8 GB Speicherriegel gesteckt und die "neue" WLAN Karte, außerdem ist zusätzlich zur MSATA eine weitere HDD installiert.
       
       


×