Jump to content
  1. theconnactic

    theconnactic

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By macinsane
      Update: Now running Mojave! Thanks to mojave2core! Yeah   Still using C2D in 2019!
      Inserted a nice and cheap GT710 that is not relying on nVidias Webdrivers and runs OOB under Mojave.
       
      Nice, seeing High Sierra running on this old but capable system! It rocks with a new ASUS GT1030
       
      Config:
      Gigabyte EP43-DS3L
      Core2Quad Q9300
      6 GB DDR2 RAM
      Asus GT1030 2GB
      Sandisk SSD 128GB
      TP-Link AC1200 Wifi USB
      Inateck KT4006 USB 3.0 PCIe (No boot)
       
      SMBIOS: iMac14,1
      Clover: 4297  4360
       
      A good deal of DSDT editing was necessary to get this machine to boot High Sierra but finally it works flawlessly, even sleep and wake!
      You NEED to have the DSDT put in place for installation because otherwise macOS doesn't recognize the SATA ports.
      There are a few important BIOS settings: SATA hast to be set to AHCI and "native" and HPET has to be run "64-bit", I'd recommend to disable IDE and the serial and parallel port.
      For the GT1030 nVidia Webdrivers are needed, have to boot with nv_disable=1 until you have them installed.
      You have to install Clover in legacy mode because this old fella does not support UEFI.
       
      Only downside: The so often recommended Inateck USB-card isn't recognized by BIOS, so you cannot boot from it. It works perfectly within macOS though, have the ac-Wifi connected to it.
      config.plist.zip
      DSDT.aml.zip
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By zeg66
      Please help me with this 10.9.5 system. Motherboard: Gigabyte 965p-s3 rev3.3, gpu: Ati Radeon HD6450 (dvi/hdmi/vga). 
      Using any of the 3 ports on the 6450 (dvi, hdmi, vga), I see all the white letters on black background during boot but when they complete and it's time for the graphics to start I get a black screen and sometimes a restart after that. Using Clover 4411. Is there any way to get past this?
    • By zeg66
      Could you please help me enable the VGA port on the GT710 in 10.9.5 13F34 ? 
      It is currently booting fine through its HDMI port, web driver 334.0103f01 and config.plist arguments checked: Verbose (-v), npci=0x2000, dart=0, nvda_drv=1
      The nvidia GT710 works fine through its VGA port and web drivers on a friend's Mac Pro 3,1
      I must soon return this borrowed HDMI monitor, mine only has a VGA port so I'd appreciate your input.
    • By zeg66
      Have managed to boot into Finder without a usb but cannot see the outside world. Could you please help me to enable Marvell 80E8056 ethernet access on 10.9.5 13F34 ?
×