Jump to content
rodrigocunha

[USB Wifi] Updated Ralink/Mediatek RT2870/ RT2770/ RT3X7X/ RT537X/ RT5572

390 posts in this topic

Recommended Posts

Alas! SysProfiler shows nothing in USB section, although the blue light of the adapter is turned on. 

Thank you for the link: I'll check and see.

Share this post


Link to post
Share on other sites
Advertisement

Your USB ports may not all be working... Bear in mind that USB ports work differently since El Capitan and require DSDT/ACPI patching + USB port injection. There are many threads on that matter.

Share this post


Link to post
Share on other sites

It's ok now: I could read my USB device information. So it's a Ralink T3070.

 

  Identifiant du produit : 0x3070
  Identifiant du fournisseur : 0x148f
  Version : 1.01
  Numéro de série : 1.0
  Vitesse : Jusqu’à 480 Mb/s
  Fabricant : Ralink
  Identifiant de l’emplacement : 0x14200000 / 2
  Courant disponible (mA) : 500
  Exploitation supplémentaire actuelle (mA) : 0

Share this post


Link to post
Share on other sites

https://www.mediatek.com/products/search?q=RT3070

 

As seen before, they got their knickers in a twist and you've got to click on the Linux icon to get the macOS driver...  :wacko: But It's ancient stuff and drivers are only listed for Leopard 10.5 to Mavericks 10.9.

 

Maybe it's time to consider something newer, not 10yrs old.

Share this post


Link to post
Share on other sites

1 - the 10.9 driver seems not effective anymore, and it is not my device...

 

2 - I am not comfortable with Clover: I understand it as a bootloader and I do not need one. Does a light install/feature exist ? or else the driver seem not to be installed.

Share this post


Link to post
Share on other sites

Did you give the packages published in post #268 and post #269 any thoughts? You know... homework... Former is driver v5.1.0.27. If you look into the latter (say with Pacifist app), you'll see a driver for Sierra with version v5.1.0.28. 'worth a shot, wouldn't you think?

 

I would invite you to look at the list of supported devices specified in either kext's Info.plist: many are labelled xxx 3070. You could find those drivers work OOB for your dongle, especially if you consider these 2 x particular entries:

<key>Ralink3070-1</key><dict>
<key>CFBundleIdentifier</key>
<string>com.Ralink.driver.RT2870USBWirelessDriver</string>
<key>IOClass</key>
<string>RT2870USBWirelessDriver</string>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>idProduct</key>
<integer>12400</integer>
<key>idVendor</key>
<integer>5263</integer>
</dict>
and
<key>Ralink3070-2</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.Ralink.driver.RT2870USBWirelessDriver</string>
<key>IOClass</key>
<string>RT2870USBWirelessDriver</string>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>idProduct</key>
<integer>12400</integer>
<key>idVendor</key>
<integer>5263</integer>
</dict>

`

12400 (dec) = 0x3070 (hex)
5263 (dec) = 0x148f (hex)
 
Link of post #269 translates to: www.edimax.us/download/drivers/MAC/Sierra/EW-7711MAC_Driver_1.0.0.7.zip (with http:// in front)

Now, I say this, I say nothing...

Share this post


Link to post
Share on other sites

Thank you for this complete answer and... lesson ! I have to say it is more like a holiday hobby for me... I tried these posts, hopefully Pacifist was the software I needed.

 

So I extraced the v5.1.0.28 and placed it into /System/Library/Extensions, installed BearExtender1200Sierra Alfa Wireless Utility, restarted. But the device connected does not open the window of the wireless utility.

 

I will give a last chance with "WIFI Network macOS High Sierra", but I have to leave this device tomorrow, hopefully on a success note.

BTW, what is OOB ?

 

Edit: for "WIFI Network macOS High Sierra", I also manually placed the framework - the startup item was correctly placed. But still no window opened by the wireless utility app, only the icon on the upper bar. The same for every solution: maybe none is High Sierra compatible yet ?

Share this post


Link to post
Share on other sites

OOB = Out Of the Box
 
You said you "extracted the v5.1.0.28 and placed it into /S/L/E". Did you then repair permissions and rebuild the cache? If not, the kext will most likely not load due to incorrect permissions.
 
This is addressed through the following commands:

sudo chmod -Rf 755 /S*/L*/E*
sudo chown -Rf 0:0 /S*/L*/E*
sudo touch -f /S*/L*/E*
sudo kextcache -Boot -U /

If you get errors (not warnings) at the end, repeat the touch + kextcache commands or retype the entire sequence after the following additional commands:

sudo rm -Rf /S*/L*/PrelinkedKernels
sudo rm -Rf /S*/L*/Caches/com.apple.kext.caches

Reboot afterwards. If the driver does load at boot time, you'll see it listed in SysProfiler->Software->Extensions with those other kexts with status Loaded set to Yes.

Share this post


Link to post
Share on other sites

Okay for all. This is really new and interesting. I will test it next time I go to the place with this device. Thank you again, I'll let you know (maybe for Christmas).

Share this post


Link to post
Share on other sites

Hi,

Here I am again.

Now RT2870USBWirelessDriver.kext appears not to be loaded in SystemInfo.

 

This is what I can tell :

  • after executing kextcache, I got : "requesting launchd reboot"
  • RT2870USBWirelessDriver.kext does not have @ after permission drwxr-xr-x like the other ones
  • /Library/Frameworks/RaWLAPI.framework does not have @ after permission drwxr-xr-x like the other ones (except PluginManager.framework and aliases)
I can test any new idea again (before Easter) until Jan. 3rd. Thanks! and Merry Christmas to all!

Share this post


Link to post
Share on other sites

I just installed Maverick RT2870USBWirelessDriver.kext on Hackintosh OS X 10.11.6 (15G18013), and it works very good.

Today, I tested it on Macintosh macOS High Sierra 10.13.2 (17C88), it works again.

 

tips:

1. Install it with Kext Utility.app

2. Try "sudo nvram boot-args=kext-dev-mode=1" if not work

 

Thanks.

Share this post


Link to post
Share on other sites

Post Edit ***  Update Package

New Package ➥ TP-LINK WIFI Network macOS

For Real Mac or Hackintosh PC Laptop

Works from Mac OS X Snow Leopard 10.6 to MacOS High Sierra 10.13

Support Drivers:

RT3572,RT3072,RT3070,RT3573,MT7610,MT7610,MT7610,RT5370,

RT2870,RT3071,RT2770,RT3573,RT5572,RT3573,RT3573,RT5572,RT3572

NOTE: But I'm sure he can support a lot more,

it is up to you to try if you  have a Drivers of the range RT or MT even if it is not listed in this list

Important : Remove any Other USB Wifi Utility in your Applications before using this Programme! remove also RT2870USBWirelessDriver.kext in Clover if you have it one.

Follow every steps in Readme

Enjoy  B)

Edit ****

One of my many test setup here in Mavericks 10.9.5 

img_1312.jpg

I tested Successfully 10.6 / 10.7 /10.8 /10.9 /10.10 /10.12 /10.13  :moil:
Test in macOS High Sierra 10.13.3

 
sans_110.png
:thumbsup_anim:

Share this post


Link to post
Share on other sites

Thanks Chriss !

 

Works marvellous on macOS High Sierra 10.13.3 and my USB DLink DWA-120 rev.b1 (RT2870)

Thanks to you for sharing success  :D

I forgot to ad RT2870 in the working list  I will Update the readme 

Share this post


Link to post
Share on other sites

is there a way to get the Asus usb-ac51 to work? 

I know Ive had it working before, in El Capitan and when Sierra were released!

 

in systemreports:
Brand: MediaTek

Product-ID: 0x17d1

Brand-ID: 0x0bc05

 

and it shows up in different wifi utilities but can't connect to any networks at all.

Share this post


Link to post
Share on other sites

is there a way to get the Asus usb-ac51 to work? 

I know Ive had it working before, in El Capitan and when Sierra were released!

 

in systemreports:

Brand: MediaTek

Product-ID: 0x17d1

Brand-ID: 0x0bc05

 

and it shows up in different wifi utilities but can't connect to any networks at all.

what is the Drivers ? RT?  MT? 

Edit **  I think its  RT2870

Did you try the programme I post here I think its work for you ? Your only have disconnect Wifi and completely remove the folder ➤ ASUS Wireless Utility, in your Application folder; move to the trash and Empty trash or run USBWireless-Uninstall.pkg from your ASUS_USB-AC51-MAC10.12.dmg

then follow every step in the readme ➜ I post here

Share this post


Link to post
Share on other sites

Hey and thank you very much for the driver bundle. I have a problem tho, im using an asus usb-ac51 and its all fine and dandy for about 10min then the dongle drops the connection and i have to restart it to get it working again.

Share this post


Link to post
Share on other sites

Hey and thank you very much for the driver bundle. I have a problem tho, im using an asus usb-ac51 and its all fine and dandy for about 10min then the dongle drops the connection and i have to restart it to get it working again.

which macOS ?

it seems to be a router and connection brobleme ?

Share this post


Link to post
Share on other sites

which macOS ?

it seems to be a router and connection brobleme ?

Running 10.13.3. Ive tried both the 2.4GHz and 5GHz net and same result. Cant really see anything strange with my router and other devices on the network doesnt have any drop issues.

Share this post


Link to post
Share on other sites

Running 10.13.3. Ive tried both the 2.4GHz and 5GHz net and same result. Cant really see anything strange with my router and other devices on the network doesnt have any drop issues.

Strange; here works good, also other user report perfect

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By chummdoggin
      A setup with an IVY bridge e5430 dell worked fine. but now seems the XHC device
      is a hardware issue. There is no bios setting to enable disable. Only enable/disable boot/external.USB in general.
      All set to enable. Also just mention of USB in power settings wake on USB.
       
      Did show up when I set up the ports w/USBINJECTALL, then was working on imessage isssue when the DSDT
      stopped loading after updating clover. I had two versions of MAcIasl. One with iasl 6. and one had 6.2a. Kept
      the 6.2a, was RM's most recent. One problem Im confused by is it compiles fine but after saved if its opened,
      the error that was repaired comes back.
       
      This part:
       
                      If (LEqual (PM6H, One))
                      {
                          CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW)  // _RW_: Read-Write Status
                          Store (Zero, ECRW (If (PM0H)
                                  {
                                      CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN)  // _LEN: Length
                                      Store (Zero, F0LN)
                                  }))
                      }
       
      Loads with the error but not sure what happened on the original that worked.
       
      Any Idea?
       
      Going over the boot log, The XHC device is there under the PCI readings dont think hardware issue... 1e31 Just seems the saved DSDT should not
      have errors after saved, but using the other version of Maciasl, the DSDT would save without errors and open without but it would not load.
      acted like there was no FakeSMC... 
       
      Edit: Seems all the saved DSDT have that error when re-opened using that version  RM's Maciasl w/iasl v.6.2a but seems to load fine.

       
      debug_8785.zip
    • By susteve
      Hello, I am new here, so I apologize if I've chosen the wrong subforum for this question. 
       
      I am scratching my head a bit on an issue with a clients MacBook pro.  He was having USB connection issues and claimed the laptop wasn't detecting any USB connected to it. 
       
      Figuring it was a failed USB port, I took it in but ended up just feeling more confused after doing some diagnostics. 
       
      It came in loaded with Catalina, a recent upgrade spurned the beginning of the issues the client told me. 
       
      I decided to revert it back to the default OS in the base recovery image, which is Yosemite. 
       
      Upon finishing the install, I found that the USB port was in fact working again. Figuring I had resolved the issue, I updated it back to Catalina just to be met with the same issue upon reinstalling. 
       
      SMH 
       
      Tried nvram, pram, and smc reset each to no avail.  
       
      One thing to note is that during boot, the USB is getting power as it lights up when connected during boot up. 
       
      But the ports are dead as soon as it boots into the operating system. 
       
      I have a strong feeling that this is a driver issue. I tried unloading and reloading the USB IO kext, with no noticable change. 
       
      Is anyone here familiar with this issue? Would there be any other kext related troubleshooting i can perform ? Is it possible to revert to the kext used in Yosemite on catalina ?
       
      One last thing to note, on Yosemite the USB was functioning 100%. But I did get a strange notification that the USB ports were using power even when there wasn't any connected to it. Either way, I find it very very odd that it works perfectly in Yosemite. 
       
      Thanks in advance
       
      Steve 
    • By jdorz
      Hello all,

      I have successfully gotten my Hackintosh working 99 percent. The remaining issue that I am running into is that my system will randomly kernel panic upon a user issued shutdown or reboot WHEN I have either a usb sound card or usb headset plugged into any of my USB ports (both 2.0 and 3.0). If I remove the headset, it will power down with no issues. Does anyone have any suggestions?

      My system is as follows:
      MacOS 10.14 Mojave
      Gigabyte H370 HD3
      8400 i5 Coffee Lake
      Radeon RX 580 sound card

      Fixed
       
      Solution
       
      Use this folder for serie 100/200/300
      https://olarila.com/forum/viewtopic.php?f=28&t=8222
       
      reboot and extract one send_me for full dsdt patch by MaLd0n
      --Run_Me
      RunMe.app
       
       
       
    • By guira
      Hey all, im new in Hackintosh world, I managed to install macOS Mojave in ASUS laptop x555LA, WIFI,HDMI,INTEL graphics, touchpad, laptop keyboard, ethernet, sound( barely, have to change it every time i run the laptop) is WORKING (after to much hours :D), also clover starts well without USB connected.
      Now my problem is that in clover, USB mouse and USB keyboard works perfectly but when MacOS load, don't know why, they stop working(just touchpad and lap keyboard working), I tried all to repair this but I can't, anyone can help me? also brightness not working but not a problem, just want USB keyboard and USB mouse working.
      AH and sorry for my English, im trying my best :D.
      btw, USB mouse and keyboard worked  when installing Mojave, but never worked in desktop or in login.
      Thanks so much , if u need more info I will be here!
    • By ludufre
      New guide available for macOS Catalina 10.15 (i3 and i5 versions)!
       
       
      Installing OS X Yosemite 10.10.3 on ASUS VivoBook S400C (also know as S400CA)
      Specifically in S400CA-CA178H model, most likely all other models are compatible
      Can't boot S400CA-CA206H due HD3000 issues (i3-2375M model)
       
        

      Updated 17/06/15 #1:
       
      - Brightness now work. DSDT patch below.
       
       
       
      - Updated attachment with DSDT.aml and missing VoodooHDA kext.
      - Added TO DO list.
       
      Updated 17/06/15 #2:
       
      - WebCam now work. Kext AnyiSightCam.
       
       
       
      - Update attachment with new WebCam kext.
       
      Updated 19/06/15 #1:
       
      - Can't boot installation in S400C-CA206H model (i3-2375M/HD3000).
       
       
       
      - VGA tested. Don't work.
      - Boot logo work. Missed CsmVideoDxe-64 on my install.
       
      Updated 21/06/15 #1:
       
      - I Forgot of the need of FakeSMC.kext.
       
       
       
       
      Updated 22/11/17 #1:
       
      - High Sierra 10.13.1 on ASUS Vivobook S400C (S400CA-CA178H).

       
      Prequel
       
      Hi, my name is Luan and today I will show how I installed the OS X Yosemite version 10.10.3 on my ultrabook.
      I know that my procedure maybe can be made in other ways, but this is about how I made it.
      I am part of this world for four years. Since the launch of XCode 7 and no need to sign the Developer Program to test applications on the iPhone, I decided to install OS X.
      God bless WWDC15 (I'm not religious, just a popular saying in my country).
       
       
      What works and what does not work
       
      - Processor ->  Work. i5-3317U @ 1.7Ghz/2.6Ghz.  SpeedStep 8 to 26 stages. AsusAICPUPM <true/> in Clover config.plist. 
      - Video Card ->  Work. HD4000. Full QE/CI.
      - Chipset ->  Work.
      - HDMI ->  Work.
      - VGA ->  Not work. I did not have time to fix yet.
      - Audio ->  Work. Kext VoodooHDA + AppleHDADisabler.
      - WiFi ->  Work. Replaced by Athero 9285 Wifi/Bluetooth.
      - Ethernet ->  Work. Kext Experimental Atheros AR81(31/32/51/52/61/62/71/72) Driver for 10.7/10.8.
      - Touchpad and keyboard ->  Work. Kext ELAN, FocalTech and Synaptics (Smart Touchpad) Driver (Mac OS X).
      - FN keyboards keys ->  Not work. I did not have time to fix yet.
      - Brightness control ->  Work. DSDT patch.
      - Sleep ->  Work.
      - Battery ->  Work. Kext ACPIBatteryManager by RehabMan and DSDT patch (below).
      - Card Reader -> Not tested. I have no adapters.
      - Integrated Camera ->  Work. Kext AnyiSightCam.
      - Bluetooth ->  Work. Kext Bluetooth Firmware Uploader and ControllerPowerState change to 1.
      - Boot Logo ->  Work.
       
       
      What I needed to install
       
      - Running install of Yosemite on VMware -> Downloaded version 10.10 via torrent (Google it). You can use a real Mac of an friend. I believe that Snow Leopard (10.6), Lion (10.7), Mountain Lion (10.8), Mavericks (10.9) also work.
      - Two USB flash drives of 8GB -> One for OSX install and another to the bootloader. This second not need to be 8GB, a 256MB is perfect.
      - OS X Yosemite install app -> Downloaded via App Store inside the virtual machine. I used version 10.10.3.
      - CloverEFI -> Also downloaded inside the virtual machine. I used build 3229.
      - DSDT patch skills -> Needed to battery works. How to patch DSDT.
       
      P.s.: You can use a single flash drive, in my install I used two because I don't wanted lose the os install created on the main flash drive.
       
       
      How I created flash cards
       
      Install flash drive:
       
      Partially used @snatch guide. More specifically this part:
       
       
       
       
       
       
      In the part above used the first flash drive (8GB).
       
      Bootloader flash drive:
       
      Format the second flash drive with GUID partition and Journaled file system type. If you want to use only one flash card, don't format!
       
      Downloaded the CloverEFI (used 3229) and installed with this options:

      Options:
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - Drivers64UEFI - CsmVideoDxe-64
      - Drivers64UEFI - OsxAptioFixDrv-64
       
      Will be created a partition named EFI. Edit the /EFI/CLOVER/config.plist and change those values:
       
      - SystemParameters - InjectKexts - <true/>
      - Graphics - Inject - ATI - <false/>
      - Graphics - Inject - Intel - <true/>
      - Graphics - ig-platform-id - 0x01660003
      - KernelAndKextPatches - AsusAICPUPM - <true/>
       
      P.s.: I will provide below my config.plist as attachment.
       
      Now you will capable to boot in installation, but your keyboard and mouse will not work. Let's fix that:
       
      - Download the Smart Touchpad kext from here. I used the version 4.3. This also enable the touchscreen.
      - Download the FakeSMC kext from here. I used the version 6.9.1315. This is very important. Can't boot without it.
      - Put the Kexts inside /EFI/CLOVER/kexts/10.10/
       
      Now you can start the instalation without problem (I guess).
       
       
      BIOS Setup Configuration
       
      - Intel Virtualization Technology: Disabled
      - VT-d: Disabled
      - USB Configuration - XHCI Pre-Boot Mode: Disabled
       
      P.s.: BIOS version 210.
       
       
      Installing indeed
       
      - Plug in the two flash drives.
      - When appear the Asus logo, press ESC once to enter Boot Menu.
      - Select the flash drive name with UEFI prefix. In my case "UEFI: KingstonDataTraveler 2.0PMAP".
      - On CloverEFI menu, use arrow to mark the flash drive with de OS X install, press Space on keyboard and select: "Boot Mac OS X in verbose mode".
      - As usual, format your HDD or SSD as GUID and Journaled. Make more partitions if you need. Take a note of the OSX partition name you entered on Disk Utillity.
      - After that, go ahead as always and start the instalation.
      - Go in the kitchen grab some lunch. You deserve it.
       
       
      Post installation
       
      What we have so far? The system installed on your ultrabook. Now you need to get rid of bootable flash drive installing the bootloader on HDD or SSD.
       
      Installing the bootloader in internal HDD or SSD:
       
      - Boot again selecting the flash drive on Boot menu. Same you did before.
      - Now select the partition you noted early.
      - If you do everything wright, the system will start normally.
      - Now you will use the CloverEFI install package again (same options from above). This time, the target will be your OS X installed partition.
       
      Our adorable ultrabook don't boot EFI if partition on the HDD or SSD if isn't MS-DOS. We will need to format and install Clover again.
       
      - Open the Terminal and enter "sudo -s".
      - Run the command: "diskutil list".
      - Take note of what location is your EFI. Usually it is "rdisk0s1". Make sure it's correct or you loose your data.
      - Now, let's format it, now execute: "newfs_msdos -v EFI -F 32 /dev/rdiskXsX". rdiskXsX is your EFI partition location from line above.
       
      Now you need to copy all data of your flash card bootloader to the root of your new created EFI partition on internal disk.
      This EFI partition is unmounted. Mount with "diskutil mount /dev/rdiskXsX".
       
      Just restart without flash drives to test.
       
      Others Kexts:
       
      Download the kexts from the links below. I strongly recommend always use newest versions. If you are too lazy, I attach on end of the post.
       
      Ethernet: ALXEthernet
      Sound: VoodooHDA (You may have to select the output there in System Preferences)
      Battery: ACPIBatteryManager
      Bluetooth: BTFirmwareUploader
      Integrated Camera: AnyiSightCam
       
      All kexts will be placed inside /EFI/CLOVER/kexts/10.10/, mount again this partition (diskutil mount /dev/rdiskXsX) for it.
       
      Now we need to add Battery patch to a new DSDT:
       
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; And the Brightness:
       
       
       
       
       
      #Maintained by: RehabMan for: Laptop Patches #graphics_PNLF_ivy_sandy.txt # This patch enables the brightness slider in SysPrefs->Displays # and will also enable activation of sleep mode by closing # the laptop lid. # # This particular version is intended to be used with ACPIBacklight.kext # although it can also be used with AppleBacklight.kext, # provided AppleBacklight.kext is patched to recognize your # display or an injector is used to set brightness levels. # # See this thread for more information: # http://www.tonymacx86.com/hp-probook-mavericks/121031-native-brightness-working-without-blinkscreen-using-patched-applebacklight-kext.html # (also read any linked threads) # # # Note: This patch should be applied to the DSDT or SSDT that defines # your integrated graphics device (always at _ADR 0x00020000) # into_all device label PNLF remove_entry; into_all device name_adr 0x00020000 code_regex (OperationRegion\s\(RMPC,\sPCI_Config[^\}]*\}) remove_matched; into device name_adr 0x00020000 insert begin OperationRegion (RMPC, PCI_Config, 0x10, 4)\n Field (RMPC, AnyAcc, NoLock, Preserve)\n {\n BAR1,32,\n }\n Device (PNLF)\n {\n // normal PNLF declares (note some of this probably not necessary)\n Name (_ADR, Zero)\n Name (_HID, EisaId ("APP0002"))\n Name (_CID, "backlight")\n Name (_UID, 10)\n Name (_STA, 0x0B)\n //define hardware register access for brightness\n // lower nibble of BAR1 is status bits and not part of the address\n OperationRegion (BRIT, SystemMemory, And(^BAR1, Not(0xF)), 0xe1184)\n Field (BRIT, AnyAcc, Lock, Preserve)\n {\n Offset(0x48250),\n LEV2, 32,\n LEVL, 32,\n Offset(0x70040),\n P0BL, 32,\n Offset(0xc8250),\n LEVW, 32,\n LEVX, 32,\n Offset(0xe1180),\n PCHL, 32,\n }\n // DEB1 special for setting KLVX at runtime...\n //Method (DEB1, 1, NotSerialized)\n //{\n // Store(Arg0, KLVX)\n //}\n // LMAX: use 0x710 to force OS X value\n // or use any arbitrary value\n // or use 0 to capture BIOS setting\n Name (LMAX, 0x710)\n // KMAX: defines the unscaled range in the _BCL table below\n Name (KMAX, 0x710)\n // KPCH: saved value for PCHL\n Name(KPCH, 0)\n // _INI deals with differences between native setting and desired\n Method (_INI, 0, NotSerialized)\n {\n // save value of PCHL for later\n Store(PCHL, KPCH)\n // determine LMAX to use\n If (LNot(LMAX)) { Store(ShiftRight(LEVX,16), LMAX) }\n If (LNot(LMAX)) { Store(KMAX, LMAX) }\n Store(ShiftLeft(LMAX,16), KLVX)\n If (LNotEqual(LMAX, KMAX))\n {\n // Scale all the values in _BCL to the PWM max in use\n Store(0, Local0)\n While (LLess(Local0, SizeOf(_BCL)))\n {\n Store(DerefOf(Index(_BCL,Local0)), Local1)\n Divide(Multiply(Local1,LMAX), KMAX,, Local1)\n Store(Local1, Index(_BCL,Local0))\n Increment(Local0)\n }\n // Also scale XRGL and XRGH values\n Divide(Multiply(XRGL,LMAX), KMAX,, XRGL)\n Divide(Multiply(XRGH,LMAX), KMAX,, XRGH)\n }\n // adjust values to desired LMAX\n Store(ShiftRight(LEVX,16), Local1)\n If (LNotEqual(Local1, LMAX))\n {\n Store(LEVL, Local0)\n If (LOr(LNot(Local0),LNot(Local1))) { Store(LMAX, Local0) Store(LMAX, Local1) }\n Divide(Multiply(Local0,LMAX), Local1,, Local0)\n //REVIEW: wait for vblank before setting new PWM config\n //Store(P0BL, Local7)\n //While (LEqual (P0BL, Local7)) {}\n If (LGreater(LEVL, LMAX))\n { Store(KLVX, LEVX) Store(Local0, LEVL) }\n Else\n { Store(Local0, LEVL) Store(KLVX, LEVX) }\n }\n }\n // _BCM/_BQC: set/get for brightness level\n Method (_BCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n Store(Match(_BCL, MGE, Arg0, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) }\n Store(DerefOf(Index(_BCL, Local0)), LEVL)\n }\n Method (_BQC, 0, NotSerialized)\n {\n Store(Match(_BCL, MGE, LEVL, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n Return(DerefOf(Index(_BCL, Local0)))\n }\n Method (_DOS, 1, NotSerialized)\n {\n // Note: Some systems have this defined in DSDT, so uncomment\n // the next line if that is the case.\n //External(^^_DOS, MethodObj)\n ^^_DOS(Arg0)\n }\n // extended _BCM/_BQC for setting "in between" levels\n Method (XBCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n If (LGreater(Arg0, XRGH)) { Store(XRGH, Arg0) }\n If (LAnd(Arg0, LLess(Arg0, XRGL))) { Store(XRGL, Arg0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) } \n Store(Arg0, LEVL)\n }\n Method (XBQC, 0, NotSerialized)\n {\n Store(LEVL, Local0)\n If (LGreater(Local0, XRGH)) { Store(XRGH, Local0) }\n If (LAnd(Local0, LLess(Local0, XRGL))) { Store(XRGL, Local0) }\n Return(Local0)\n }\n // Use XOPT=1 to disable smooth transitions\n Name (XOPT, Zero)\n // XRGL/XRGH: defines the valid range\n Name (XRGL, 40)\n Name (XRGH, 1808)\n // KLVX is initialization value for LEVX\n Name (KLVX, 0x7100000)\n // _BCL: returns list of valid brightness levels\n // first two entries describe ac/battery power levels\n Name (_BCL, Package()\n {\n 1808,\n 479,\n 0,\n 53, 55, 57, 59,\n 62, 66, 71, 77,\n 83, 91, 99, 108,\n 119, 130, 142, 154,\n 168, 183, 198, 214,\n 232, 250, 269, 289,\n 309, 331, 354, 377,\n 401, 426, 453, 479,\n 507, 536, 566, 596,\n 627, 660, 693, 727,\n 762, 797, 834, 872,\n 910, 949, 990, 1031,\n 1073, 1115, 1159, 1204,\n 1249, 1296, 1343, 1391,\n 1440, 1490, 1541, 1592,\n 1645, 1698, 1753, 1808,\n })\n }\n end;  
       
      It's done! Now go brush your teeth!
       
       
      To do list
       
      - Turn AppleHDADisabler in CloverEFI path.
      - Fix FN keyboard keys.
      - Turn Battery DSDT patch in CloverEFI path.
      - Test Cardreader.
      - Test USB3 port.
       
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX and all others members involved directly or indirectly.
       
       
      EFI.zip
×