Jump to content
Sign in to follow this  
Followers 0
jmp909

got the basics, please help... sleep & power etc! (10.9.4 / Asus P8B75-V / i7 3770 / GT210)

11 posts in this topic

Recommended Posts

Hi,

 

after a few KP's i managed to get my fresh Mavericks 10.9.4 system working relatively smoothly, but i'm not really sure about Power Management, Speedstep, C-States,P-States etc and also Wake from Sleep is broken. (No video signal on wake). I don't really know about patching my motherboard etc. Couldn't find any pre-made patches. Also i don't really understand whether i need SSDT or DSDT (apparently not the latter for UEFI Mobo?) and I don't know how i test eg C-States, P-States etc or what I need them for.

 

One thing that's a possible "issue" is the Corsair H80i, attached to the Mobo via mini-usb. there's no controller software for OSX obviously. When I had a 10.9 Mavericks working with Sleep, it would wake itself up immediately with GLAN EHC2. This may have been the USB connection on the fan forcing it to wake up but not sure. Currently though Wake is broken as mentioned, so I can't just test that issue by unplugging the USB at the moment)

 

any advice & links would be gratefully appreciated.

 

Presumably first step would be to fix the system to be able to remove NullCPUPowerManagement?

 

thanks

J

 

Mavericks 10.9.4 (from App Store)
myHack installer
myHack AppleIntelCPUPowerManagement patch
NullCPUPowerManagement.kext 
myHack TRIM patch
kernel flags: npci=0x2000 dart=0
GraphicsEnabler=Yes
Realtek81xx kext for ethernet (or might be using EthernetBuiltIn=Yes... not sure, as both present)
Envy24 audio drivers for m-audio Audiophile2496
Chameleon NVFileRam kext for iMessage fix

 

---

 

Motherboard: Asus P8B75-V (UEFI)

CPU: i7 3770
GPU: Zotac GT210

Cooler: Corsair H80i

SSD: Samsung EVO840 250GB

Share this post


Link to post
Share on other sites
Advertisement

As expected if I remove NullCPUPowerManagement from E/E my system Kernel Panics but I don't know how to fix it

Help please!
Thanks
J

post-593291-0-88325700-1405980638_thumb.jpg

Share this post


Link to post
Share on other sites

i think i managed to patch my AICPM enough to remove NullCPUPM (it's booting ok without it), but now after sleep/wake i get a KP when i go to terminal and start to type a find command (see screenshot)



 

backtrace IOHIDFamily => dependency AppleFDEKeyStore .. and ... IOGraphicsFamily => dependency IOPCIFamily

post-593291-0-05395800-1405994916_thumb.jpg

Share this post


Link to post
Share on other sites

repair your disk permissions and rebuild the cache, for this use KextWizard app.


you changed something in those kexts? backtrace IOHIDFamily => dependency AppleFDEKeyStore .. and ... IOGraphicsFamily => dependency IOPCIFamily

Share this post


Link to post
Share on other sites

i use myFix. i think that does the same thing

 

I didn't change anything in those Kexts IOHIDFamily, AppleFDEKeyStore, IOGraphicsFamily, IOPCIFamily

Share this post


Link to post
Share on other sites

I don't even think that your motherboard supports flashing. Some B75 motherboards do not have the flashing feature, so you will have to generate your own SSDT and use a patched AICPUPM.kext as charliebounce mentioned.

Share this post


Link to post
Share on other sites

Hello

I didn't change anything in those Kexts IOHIDFamily, AppleFDEKeyStore, IOGraphicsFamily, IOPCIFamily

 

I don't believe thta problem are in these kexts... the problems is in the system... bad configuration...

 

Please try that method i gave to you, it'll help you to install OSX, after that is only care about post-installation

Share this post


Link to post
Share on other sites

leonvmetcalf: i have done the AICPM patch and SSDT and sleep/wake working mostly fine now apart from the issue below with my TC Powercore PCI DSP cards not being recognized on restart or wake (although it's own control panel does see 2 cards, just not recognized)

http://www.insanelymac.com/forum/topic/299743-powercore-pci-cards-not-recognized-after-restart-or-sleepwake/?do=findComment&comment=2043688

 

also I have some odd output during bootup about sleep, stepper and ErP timer, (see screenshot) and similar to this
http://www.projectosx.com/forum/index.php?showtopic=2705&view=findpost&p=31266

 

 

 

post-593291-0-95094700-1406198013_thumb.jpg

Share this post


Link to post
Share on other sites

those ErP errors have gone since i switched to MacMini6,2 and regenerated my SSDT

 

still got the PCI issue though

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By JRevenge
      Ciao ragazzi,
      alla fine sono riuscito a risolvere il problema che riscontravo qualche mese fa, dopo l'ottima EFI sistemata da @gengik84 e l'ho risolto rimuovendo dart=0 che creava kernel panic e problemi quando la batteria scendeva sotto ad un livello di batteria basso. Adesso il sistema non crea più problemi di kernel panic, ma volevo chiedervi se allo stato attuale secondo voi c'è qualcos'altro da ottimizzare.
       
      Vi allego la EFI.
       
      Grazie anticipatamente.
      CLOVER.zip
    • By TheAngryYeti
      So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall.
       
      I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation.
       
      I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it.
       
      Thinking i was a-ok, i decided to reboot, just to make sure all was well.
       
      After about 1min, i lose display.
       
      I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again.
       
      I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display.
       
      Im attaching a screenshot of Verbose mode right before i lose display.
       
      I would greatly appreciate any help to get back into it or at least help getting it re-installed!!
       
      -Sin

    • By TheAngryYeti
      First, my build:
       
      Asus ROG Strix H370-I mobo
      i5 8400 cpu
      32gb ddr 4 2133
      1tb samsung evo 860 ssd
       
      Ive finally gotten to the point where the installation of HS loads to the language selection screen, but then i lose all usage of every USB port.
       
      Im at a loss of what to do from here.
       
      According to others, i have the proper files in the kexts/other folder as well as the drivers64UEFI folder.
       
      Does anyone have any suggestions as to what i can do? Im getting kinda desperate as ive been at it for a week now and this is as far as ive gotten.
       
      -Sin
       
       
    • By TheAngryYeti
      So I FINALLY got my High Sierra thumb drive to boot and once I got to the language selection screen, I noticed I lost all connectivity to my keyboard and mouse.
       
      i tried plugging in both into all of my USB ports (2.0, 3.0, 3.1) to no avail.
       
      i made sure I had the latest USBInject kext and XHCI-Unsupported kext in the Other folder.
       
      i also noticed whilst troubleshooting, the thumb drive will ONLY boot using Verbose and plugged into one of the 2 3.1 ports.
       
      does anyone have ANY suggestions?? I’ve been struggling for a week now on this!!
       
      thanks in advance
       
      -Sin
       
      Build: Asus ROG Strix H370-I, i5 8400, 32Gb ddr 4 2133, 1Tb Samsung EVO 860 ssd
×