I am trying to make a new Hackintosh under 10.13 with this specs: i7 6800K, Asus X99-E Asus GTX 970
But the problem is that I can't pass those errors : - couldn't allocate runtime area - end randomseed ++++++++++++++ _
I have always passed this thing on all hackintoshs that I have done, but here, impossible.
Tried those tests : - AptioMemoryFix alone, - AptioMemoryFix with EmuVariableUefi and RC Scripts, - OsxAptioFix2Drv-free2000 with EmuVariableUefi and RC Scripts, - Test2-2016.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts, - Test2-2016.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts, - Test2-2016.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts, - Test2.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts, - Test2.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts, - Test2.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts.
I have tried all this with npci=0x3000 that I have never used before instead of npci=0x2000
I have done an Hackintosh on Asus X99 Deluxe II and it pass with AptioMemoryFix with EmuVariableUefi and RC Scripts....
I have tried to reset NVRAM with F11.
I have tried with 1 RAM stick that I have indicate in the SMBIOS :
Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
After wakeup my system is slow, console input show some duplicate character when I type some commands. Intel Power Gadget is shows no more statistics.
I am looking for solution several days, but I can't find.
Maybe some one have the same system or tips for me?
ASUS ZenBook UX330UAR
8GB RAM / 256GB SSD
1920 x 1080 (UHD 620)
After using this guide to setup my laptop as a Hackintosh (macOS 10.14.6), every once in a while it'll result in the screen flickering, and usually the intervals between the flickering get smaller and smaller to the point where sometimes the screen just panics. I tried injecting my EDID and setting my SMBIOS to iMac18,1 but none of those defeated the dreaded flickering.
Any assistance would be greatly appreciated!
EDIT: I'd also note that this does not happen with Linux nor Windows so it is a macOS issue not a hardware issue.