Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By iTahaMe
      FINALLY IT'S WORKING THANKS TO @insanelymac
      But i have a single problem, My graphic card Radeon x1950 Pro not working, It used to work good on Snow Leopard but now its not on Yosemite i don't know why ... any kext needed ??
       
      Here the kext used to work good for me on Snow Leopard
      ATIRadeonx1000.kext 
      ATINDRV.Kext
      ATIRNDRV.Kext
       
       
      Any Help ? 
      Taha

    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
       
    • By warty
      On 8/20/2018 at 5:22PM, TessereKt said:
       
      On 8/21/2018 at 7:34AM, insanelyDeepak said:
       
      @insanelyDeepak, I would like to try cloverHDA, but I need help understanding how to use it.
       
      I have an Asus laptop that uses Realtek ALC295.
       
      My questions with regard to using cloverHDA:
      1.  I am running High Sierra (10.13.6). Is cloverHDA directly compatible? If not, can it easily be made compatible with adjustments I can apply?
       
      2.  What needs to be done with the original AppleHDA.kext that is already present in /S/L/E? Should it be left alone? Should it be removed? If it is removed, does the AppleHDA.kext that comes with cloverHDA, for example /Vanilla AppleHDA/Mac OS Sierra 10.12.6/AppleHDA.kext, need to be installed in its place?
       
      3.  In the 21 aug 18 reply to TessereKt, you mentioned "there is ALCPluxfix must install this." I noticed that there is a directory for alc_fix in one ALC295 directory (the ALC295_v2 Asus UX430UA directory) but not in the other ALC 295 directory that is provided (the ALC295/3254 directory). In which situation(s) is ALCPlugFix required?
       
      4.  My pathmaps are somewhat different from those in the cloverHDA.kext. Is there an easy way for me to customize the kext? For example, if I just switch the values in the xml files, will that be enough? Or does the whole thing then need to be recompiled?
       
      needed pathmaps:
      33-2
      23-3
      7-36-18
      9-34-19
       
      (My highest priority for the moment is getting headphone working, which is 33-2, and I might even be able to use the 33-3 that is already included. But I would like to eventually get all of them working.)
       
       
    • By yehia2amer
      I want to patch AppleHDA but I cannot find any post talking about ALC3220, I Tried AppleALC (ALC280 - layout-id 11), and AppleHDA Patcher v1.9  (ALC280 - layout-id 5) with no luck.
      I Also Tried VodooHDA but it is very buggy an unstable !
       
      So Now Please find my Codec details below
      ------
      Linux codec_dump.txt 
       
      Codec: Realtek ALC3220 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0280 Subsystem Id: 0x102805d4 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x4008c000: [N/A] Line Out at Ext N/A Conn = DIN, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a13040: [Jack] Mic at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19030: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40400001: [N/A] SPDIF Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=107 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono  
      Jarvis report:
      Hardware info: - ATI R6xx HDMI (1002:aa01) - Controller 1002:aa30 (sub-ven:174b:aa30) - Driver: VoodooHDA SSDT-4.aml succesfully extracted! DSDT.aml succesfully extracted! SSDT.aml succesfully extracted! SSDT-1.aml succesfully extracted! SSDT-3.aml succesfully extracted! SSDT-2.aml succesfully extracted! Found "Device (HDEF)" in DSDT.aml Found property "layout-id" in DSDT.aml Found 1 occurennces of "layout-id" in ioreg, not sure what's will be for HDEF.. Found unsupported "layout-id = 11" in ioreg, will not work using Mirone's patches!!! No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it! AppleHDA Patcher.app only supports (if patched by Mirone): layout-id 2 for laptop's, layout-id 5 for Desktop's with 3 connectors (pink, green and blue), layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue), layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2) aDummyHDA.kext works only is /System/Library/Extensions. Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional. HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config, or the org.Chameleon.Boot.plist. CodecCommander.kext is usefull in the case you have no sound after waking from sleep. Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache: dragging kexts into Pandora's Box.app window will help you to do that!  
      Chipset Name: Intel Corporation C600/X79 series chipset High Definition Audio Controller (rev 06)
      Codec Name: Realtek ALC3220
      Linux Codec Dump : codec_dump.txt
      codec_dump.txt.svg
      Patched DSDT: DSDT.aml
       
       
      Thanks
       
×