Jump to content
carbo178

[UPDATE][Guida] Installazione OS X 10.10 Yosemite

23 posts in this topic

Recommended Posts

OS X 10.10 Yosemite2ngcuad.jpg

Salve a tutti

Finalmente è disponibile la versione finale del nuovo sistema operativo di Cupertino.

 

Files che potrebbero servire:

Clover_v2k_r2830.zip

ShowAllFiles.app.zip

Kext.zip

 

Creazione della Pendrive

 

La creazione della pendrive ricalca in gran parte  il metodo usato per tutti gli altri sistemi da Lion in poi (vedere analoga guida per Mavericks), salvo che in questo caso non dobbiamo andare a cercare il file mach_kernel.

Ma procediamo con ordine:

  • Cliccate il destro su “Installazione di OS X Yosemite.app” poi Mostra contenuto pacchetto-Contents-SharedSupport.
  • Montate l'immagine InstallESD.dmg.
  • Lanciate ShowAllFiles e visualizzate i files nascosti; montate l'immagine OS X BaseSystem.dmg.
  • Utilizzate Utility Disco per ripristinare l’immagine OS X Base System su una pendrive USB (o su una partizione dell'HD) formattata in Mac OS Esteso (Journaled) con tabella partizioni GUID.
  • Al termine eliminate il collegamento alla cartella Package in System/Installation della pendrive.
  • Copiate e incollate la cartella Packages che si trova in OS X Install ESD nella directory System/Installation della pendrive.
  • Copiate l'immagine BaseSystem.dmg e il file Basesystem.chunklist nella root della pendrive.
  • Installate il bootloader Clover sulla pendrive.
  • Nella cartella Clover/ACPI/Patched mettete (se lo avete) il dsdt che usate normalmente sul vostro attuale sistema.
  • Nella cartella Clover/kexts/10.10 (se non c'è la create) mettete i kext essenziali al sistema, come FakeSMC ed eventualmente NullCPUPowerManagement; oltre a questi potrete mettere anche altri kext che usate correntemente sul sietema attuale (ad es. VoodooPS2controller, nel caso di un portatile).

Contrariamente a quanto pensavo, la stringa kext-dev-mode=1 è ancora necessaria per caricare i kext non firmati, pertanto dovete aggiungere al config.plist:

<key>Arguments</key>
<string>kext-dev-mode=1</string>

assicuratevi che ci sia anche questa stringa:

<key>SystemParameters</key>
<dict>
    <key>InjectKexts</key>
    <string>Yes</string>
</dict>

Installazione

 

  • Fate il boot della pendrive, la nuova versione di Clover è stata modificata per permettere il caricamento dei kext contenuti in EFI/CLOVER/kexts quindi non c'è bisogno di fare nient'altro.
  • Se tutto va bene procedete con l'installazione e riavviate il sistema installato, fate la prima configurazione e il gioco è fatto. 

Per motivi a me ignoti Clover non mi carica i kext che ho messo in EFI/Clover/kexts/10.10; se dovesse capitare anche a voi procedete come segue:

 

Installate FakeSMC (ed eventualmente NullCPUPM) in S/L/E della chiavetta, avviate con -s e digitate:

/sbin/fsck -fy
/sbin/mount -uw /
cd /System/Library/Extensions
chmod -R 755 FakeSMC.kext
chown -R root:wheel FakeSMC.kext
kextload -v FakeSMC.kext
exit

ripetete il procedimento per NullCPUPM (se lo usate) prima di digitare exit; a questo punto partirà l'installazione.

 

Riavviate scegliendo il sistema funzionante precedente (ad es. il disco di Mavericks o ML), installate i kext aggiuntivi che usate solitamente per Mavericks o ML nel disco di Yosemite e riavviate nuovamente, stavolta scegliendo di far partire il disco di Yosemite.

 

Se non arrivate alla prima configurazione ripetete il passaggio sopra per caricare FakeSMC o digitate quanto segue (avviando il sistema con -s):

/sbin/fsck -fy
/sbin/mount -uw /
kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions
exit

Godetevi il vostro nuovo Yosemite

 

vx4q0.jpg

 

2h2f2qh.jpg

 

2ytwy05.jpg

 

Nota su Chameleon

Le ultime versioni di Chameleon e Enoch supportano l'installazione di Yosemite, in org.chameleon.Boot.plist deve esserci la stringa:

<key>Kernel Flags</key>
<string>kext-dev-mode=1</string>

Inoltre nella USB non è presente la cartella Kernels nella posizione System/Library, pertanto dovete crearla e mettere al suo interno il kernel estratto preventivamente con Pacifist dalla cartella OS X InstallESD/Packages/Essentials.pkg/System/Library/Kernels/Kernel (Chameleon o Enoch sono stati modificati per cercare il kernel in quella posizione)

 

Per chi ha problemi con l'estrazione del kernel ecco il link per la cartella Kernels (versione 10.10) da mettere in System/Library 

http://cl.ly/2M3u3A2s1o2X/download/Kernels.zip

 

Piattaforme Haswell

 

Chi ha una piattaforma Haswell (Z87-Z97 e simili) e ha problemi di reboot istantaneo deve usare un kernel appositamente patchato, disponibile nella sezione Downloads-Kernels

 

UPDATE:

La creazione della pendrive e la post-installazione del sistema si possono eseguire con Pandora 2.0, la app creata da Micky1979 che automatizza il processo di installazione di OS X sul vostro PC.

 

I dovuti ringraziamenti vanno a tutti coloro che hanno contribuito coi loro test alla riuscita dell'operazione:

 

fantomas1 Allan +ira WarDoctor snatch Scellow (per le guide) Slice (Clover) netkas (FakeSMC)

 

Sicuramente dimentico un sacco di persone che hanno contribuito, perdonate le mie dimenticanze

Edited by carbo178
Aggiornato guida per l'ultima versione di Clover e Yosemite final release

Share this post


Link to post
Share on other sites
Advertisement

Io per ricreare la kernelcache (invece che l'Extensions.mkext) uso questo comando, che include anche il kernel stesso (lo usa di default OS X):

 

sudo kextcache -prelinked-kernel /System/Library/Caches/com.apple.kext.cache/Startup/kernelcache -K /System/Library/Kernels/kernel /System/Library/Extensions

Share this post


Link to post
Share on other sites

Io per ricreare la kernelcache (invece che l'Extensions.mkext) uso questo comando, che include anche il kernel stesso (lo usa di default OS X):

 

sudo kextcache -prelinked-kernel /System/Library/Caches/com.apple.kext.cache/Startup/kernelcache -K /System/Library/Kernels/kernel /System/Library/Extensions

 

Grazie del contributo, questo comando sarebbe possibile usarlo prima del riavvio al termine dell'installazione direttamente da terminale?

Share this post


Link to post
Share on other sites

Con la versione di Clover_v2k_r2695 : http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-20?do=findComment&comment=2025478

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
   <key>Boot</key>
   <dict>
      <key>Arguments</key>
      <string>-v kext-dev-mode=1</string>
   </dict>
   <key>GUI</key>
   <dict>
      <key>Theme</key>
      <string>nome del tema</string>
   </dict>
   <key>SystemParameters</key>
   <dict>
      <key>InjectKexts</key>
      <true/>
   </dict>
</dict>
</plist>
Copiare i kexts essenziali (FakeSMC, NullCPUPowerManagement, ecc) per EFI/CLOVER/kexts/10.10 
 
Fare il boot da usb e procedere con l'installazione.
 
Fabio

Share this post


Link to post
Share on other sites

Note sulla mia installazione:

Dopo aver proceduto  ad abilitare con i comandi sotto riportati e seguento tutta la procedura di cui "prima pagina"  configurando il desktop, al primo riavvio rimaneva con la linea di caricamento a metà fermo

Procedendo nuovamente all'assegnazione del "FakeSMC.kext " si è avviato nuovamente e a questo punto onde evitare che al prossimo riavvio mi si bloccava nuovamente, ho provato a fare la procedura senza aggiungere altri kexts ho riparato i permessi con il Kext Utility o ricotruito la cache.

Facendo così ora funziona benissimo il boot lo faccio direttamente con hdd Yosemite e il caricamento e veloce.

Spero questa soluzione possa servire a qualcuno che avuto lo stesso problema.

Grazie a tutti per l'attenzione

Luigi

 

/sbin/fsck -fy
/sbin/mount -uw /
cd /System/Library/Extentions
chmod -R 755 FakeSMC.kext
chown -R root:wheel FakeSMC.kext
kextload -v FakeSMC.kext
exit

Share this post


Link to post
Share on other sites

Note sulla mia installazione:

Dopo aver proceduto  ad abilitare con i comandi sotto riportati e seguento tutta la procedura di cui "prima pagina"  configurando il desktop, al primo riavvio rimanera con la linea di caricamento a metà fermo

Procedendo nuovamente all'assegnazione del "FakeSMC.kext " si è avviato nuovamente e a questo punto onde evitare che al prossimo riavvio mi si bloccava nuovamente, ho provato a fare la procedura senza aggiungere altri kexts ho riparato i permessi con il Kext Utility o ricotruito la cache.

Facendo così ora funziona benissimo il boot lo faccio direttamente con hdd Yosemite e il caricamento e veloce.

Spero questa soluzione possa servire a qualcuno che avuto lo stesso problema.

Grazie a tutti per l'attenzione

Luigi

 

/sbin/fsck -fy

/sbin/mount -uw /

cd /System/Library/Extentions

chmod -R 755 FakeSMC.kext

chown -R root:wheel FakeSMC.kext

kextload -v FakeSMC.kext

exit

Ora la guida è stata aggiornata, se vuoi provare il metodo "semplice"...

Share this post


Link to post
Share on other sites

Note sulla mia installazione:

Dopo aver proceduto  ad abilitare con i comandi sotto riportati e seguento tutta la procedura di cui "prima pagina"  configurando il desktop, al primo riavvio rimaneva con la linea di caricamento a metà fermo

Procedendo nuovamente all'assegnazione del "FakeSMC.kext " si è avviato nuovamente e a questo punto onde evitare che al prossimo riavvio mi si bloccava nuovamente, ho provato a fare la procedura senza aggiungere altri kexts ho riparato i permessi con il Kext Utility o ricotruito la cache.

Facendo così ora funziona benissimo il boot lo faccio direttamente con hdd Yosemite e il caricamento e veloce.

Spero questa soluzione possa servire a qualcuno che avuto lo stesso problema.

Grazie a tutti per l'attenzione

Luigi

 

/sbin/fsck -fy

/sbin/mount -uw /

cd /System/Library/Extentions

chmod -R 755 FakeSMC.kext

chown -R root:wheel FakeSMC.kext

kextload -v FakeSMC.kext

exit

Aggiorna il bootloader di Clover alla 2695 sulla usb

 

Fabio

Share this post


Link to post
Share on other sites

Grazie del contributo, questo comando sarebbe possibile usarlo prima del riavvio al termine dell'installazione direttamente da terminale?

Si, puoi avviarlo facendo attenzione a dove vai a creare la kernelcache e quale kernel selezioni. Inoltre, è anche consigliato farlo dall'installazione in quanto c'è già l'opzione kext-dev-mode=1 nella nvram e quindi non hai problemi.

Share this post


Link to post
Share on other sites

Ragazzi una cosa vorrei sapere ,dato che con AMD devo sostituire il mach_kernel 

e in Yosemite non è nella root come sempre dove lo hanno ficcato  :rofl:

Share this post


Link to post
Share on other sites

Ragazzi una cosa vorrei sapere ,dato che con AMD devo sostituire il mach_kernel 

e in Yosemite non è nella root come sempre dove lo hanno ficcato  :rofl:

Sistema/libreria/Kernels

Tra l'altro non si chiama più "mach_kernel", solo "kernel"

Share this post


Link to post
Share on other sites

Amici con il mio audio codec ALC892 utilizzando i kexts per mavericks AppleHDA.kext e HDAEnabler1.kext, riparando anche i permessi, non si attiva, ho dovuto installare per sentire l'audio VoodooHDA 2.8.0

Suggerimenti per risolvere il problema utilizzando i kexts sopradetti

Grazie

 

Luigi

Share this post


Link to post
Share on other sites

Prova ad iniettare l'id dell'audio in un altro modo. Io per esempio lo faccio tramite DSDT così ce l'ho uguale su tutti i sistemi. Ti dico questo perché io uso un AppleHDA dalla, udite udite, 10.6.3! E ho tutto, anche l'audio HDMI!

 

Volevo, inoltre, fare una piccola domanda. Ma se io, con il nuovo Clover 2696, volessi mettere in EFI/CLOVER/kexts/10.10 i kext:

  • AppleACPIPlatform
  • IOPCIFamily
  • FakeSMC
  • ApplePS2Controller
  • AppleACPIPS2Nub

indispensabili per un uso minimo del mio sistema, questi verrebbero caricati oppure verrebbero sovrascritti da quelli presenti in /System/Library/Extensions?

 

Scusate per l'OT.

Share this post


Link to post
Share on other sites

Prova ad iniettare l'id dell'audio in un altro modo. Io per esempio lo faccio tramite DSDT così ce l'ho uguale su tutti i sistemi. Ti dico questo perché io uso un AppleHDA dalla, udite udite, 10.6.3! E ho tutto, anche l'audio HDMI!

 

Volevo, inoltre, fare una piccola domanda. Ma se io, con il nuovo Clover 2696, volessi mettere in EFI/CLOVER/kexts/10.10 i kext:

 

  • AppleACPIPlatform
  • IOPCIFamily
  • FakeSMC
  • ApplePS2Controller
  • AppleACPIPS2Nub
indispensabili per un uso minimo del mio sistema, questi verrebbero caricati oppure verrebbero sovrascritti da quelli presenti in /System/Library/Extensions?

 

Scusate per l'OT.

Si ti vengono caricati, l'importante e' nel config.plist abiliti l'iniezione kext ( vedi post 5 )

 

Fabio

Share this post


Link to post
Share on other sites

Ragazzi sono fermo Con AMD, perché non so' come sostituire il Kernel che anno spostato e non è più' nella root

Preparata Usb dovrei provare dei Kernel

ma è dentro Essential.pkg

con Pacifist posso solo aprirlo ma non so come sostituire la cartella

Qualcuno sa come fare?

 

Schermata 2014-06-15 alle 10.41.17.png

Schermata 2014-06-15 alle 10.41.29.png

Share this post


Link to post
Share on other sites

Ragazzi sono fermo Con AMD, perché non so' come sostituire il Kernel che anno spostato e non è più' nella root

Preparata Usb dovrei provare dei Kernel

ma è dentro Essential.pkg

con Pacifist posso solo aprirlo ma non so come sostituire la cartella

Qualcuno sa come fare?

C'è un modo che potresti provare. L'installazione (il pennino per intenderci) non ha il kernel ben in vista, ma è contenuto sia in Essentials.pkg (che viene installato sul disco finale in /System/Library/Kernels) sia nella kernelcache (quella contenuta in /S/L/Caches/com.apple.kext.cache/Startup/kernelcache). Questo perché l'installazione ha dei kext minimi con cui partire e non deve cercarli ogni volta, kernel incluso. Sul sistema installato abbiamo il kernel nudo e crudo solo per poter ricreare questa cache.

 

Quello che potresti fare tu è creare una kernelcache personalizzata dando questo comando da OS X (dovrebbero andar bene anche Mountain Lion o Mavericks)

kextcache -prelinked-kernel ~/kernelcache -K /Percorso/Al/Tuo/Kernel_AMD /Percoso/Alle/Tua/Cartella/Extensions

E dovresti ritrovarti il kernelcache nella tua Home. Copia quel file (sostituendo) in  /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache e avvii con UseKernelCache=Y su Chameleon (non so su Clover quale sia l'argomento da dare). 

 

Voglio precisare che non ho mai provato una procedura del genere ma per quanto ne so dovrebbe funzionare, l'importante è che i kext sano compatibili con il kernel. :) Ciao!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ibm650
      New here, I used to do macs but mainly PCs now. So please excuse my ignorance. Mac stores are closed in Arizona, My friend has a circa 2015 Macbook Pro.  On startup, the line goes about halfway and then goes to a spinning icon that goes on and off.  I did a disk repair and permissions , but it still does the same.  So I tried to reload the OS, it says not found, apparently you cannot download Yosemite anymore.  So, the rest of my machines are windows.  Where do I get Yosemite and how can I build it on a Windows machine that I can have the Mac start up. Help please.
    • By ludufre
      New guide available for macOS Catalina 10.15 (i3 and i5 versions)!
       
       
      Installing OS X Yosemite 10.10.3 on ASUS VivoBook S400C (also know as S400CA)
      Specifically in S400CA-CA178H model, most likely all other models are compatible
      Can't boot S400CA-CA206H due HD3000 issues (i3-2375M model)
       
        

      Updated 17/06/15 #1:
       
      - Brightness now work. DSDT patch below.
       
       
       
      - Updated attachment with DSDT.aml and missing VoodooHDA kext.
      - Added TO DO list.
       
      Updated 17/06/15 #2:
       
      - WebCam now work. Kext AnyiSightCam.
       
       
       
      - Update attachment with new WebCam kext.
       
      Updated 19/06/15 #1:
       
      - Can't boot installation in S400C-CA206H model (i3-2375M/HD3000).
       
       
       
      - VGA tested. Don't work.
      - Boot logo work. Missed CsmVideoDxe-64 on my install.
       
      Updated 21/06/15 #1:
       
      - I Forgot of the need of FakeSMC.kext.
       
       
       
       
      Updated 22/11/17 #1:
       
      - High Sierra 10.13.1 on ASUS Vivobook S400C (S400CA-CA178H).

       
      Prequel
       
      Hi, my name is Luan and today I will show how I installed the OS X Yosemite version 10.10.3 on my ultrabook.
      I know that my procedure maybe can be made in other ways, but this is about how I made it.
      I am part of this world for four years. Since the launch of XCode 7 and no need to sign the Developer Program to test applications on the iPhone, I decided to install OS X.
      God bless WWDC15 (I'm not religious, just a popular saying in my country).
       
       
      What works and what does not work
       
      - Processor ->  Work. i5-3317U @ 1.7Ghz/2.6Ghz.  SpeedStep 8 to 26 stages. AsusAICPUPM <true/> in Clover config.plist. 
      - Video Card ->  Work. HD4000. Full QE/CI.
      - Chipset ->  Work.
      - HDMI ->  Work.
      - VGA ->  Not work. I did not have time to fix yet.
      - Audio ->  Work. Kext VoodooHDA + AppleHDADisabler.
      - WiFi ->  Work. Replaced by Athero 9285 Wifi/Bluetooth.
      - Ethernet ->  Work. Kext Experimental Atheros AR81(31/32/51/52/61/62/71/72) Driver for 10.7/10.8.
      - Touchpad and keyboard ->  Work. Kext ELAN, FocalTech and Synaptics (Smart Touchpad) Driver (Mac OS X).
      - FN keyboards keys ->  Not work. I did not have time to fix yet.
      - Brightness control ->  Work. DSDT patch.
      - Sleep ->  Work.
      - Battery ->  Work. Kext ACPIBatteryManager by RehabMan and DSDT patch (below).
      - Card Reader -> Not tested. I have no adapters.
      - Integrated Camera ->  Work. Kext AnyiSightCam.
      - Bluetooth ->  Work. Kext Bluetooth Firmware Uploader and ControllerPowerState change to 1.
      - Boot Logo ->  Work.
       
       
      What I needed to install
       
      - Running install of Yosemite on VMware -> Downloaded version 10.10 via torrent (Google it). You can use a real Mac of an friend. I believe that Snow Leopard (10.6), Lion (10.7), Mountain Lion (10.8), Mavericks (10.9) also work.
      - Two USB flash drives of 8GB -> One for OSX install and another to the bootloader. This second not need to be 8GB, a 256MB is perfect.
      - OS X Yosemite install app -> Downloaded via App Store inside the virtual machine. I used version 10.10.3.
      - CloverEFI -> Also downloaded inside the virtual machine. I used build 3229.
      - DSDT patch skills -> Needed to battery works. How to patch DSDT.
       
      P.s.: You can use a single flash drive, in my install I used two because I don't wanted lose the os install created on the main flash drive.
       
       
      How I created flash cards
       
      Install flash drive:
       
      Partially used @snatch guide. More specifically this part:
       
       
       
       
       
       
      In the part above used the first flash drive (8GB).
       
      Bootloader flash drive:
       
      Format the second flash drive with GUID partition and Journaled file system type. If you want to use only one flash card, don't format!
       
      Downloaded the CloverEFI (used 3229) and installed with this options:

      Options:
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - Drivers64UEFI - CsmVideoDxe-64
      - Drivers64UEFI - OsxAptioFixDrv-64
       
      Will be created a partition named EFI. Edit the /EFI/CLOVER/config.plist and change those values:
       
      - SystemParameters - InjectKexts - <true/>
      - Graphics - Inject - ATI - <false/>
      - Graphics - Inject - Intel - <true/>
      - Graphics - ig-platform-id - 0x01660003
      - KernelAndKextPatches - AsusAICPUPM - <true/>
       
      P.s.: I will provide below my config.plist as attachment.
       
      Now you will capable to boot in installation, but your keyboard and mouse will not work. Let's fix that:
       
      - Download the Smart Touchpad kext from here. I used the version 4.3. This also enable the touchscreen.
      - Download the FakeSMC kext from here. I used the version 6.9.1315. This is very important. Can't boot without it.
      - Put the Kexts inside /EFI/CLOVER/kexts/10.10/
       
      Now you can start the instalation without problem (I guess).
       
       
      BIOS Setup Configuration
       
      - Intel Virtualization Technology: Disabled
      - VT-d: Disabled
      - USB Configuration - XHCI Pre-Boot Mode: Disabled
       
      P.s.: BIOS version 210.
       
       
      Installing indeed
       
      - Plug in the two flash drives.
      - When appear the Asus logo, press ESC once to enter Boot Menu.
      - Select the flash drive name with UEFI prefix. In my case "UEFI: KingstonDataTraveler 2.0PMAP".
      - On CloverEFI menu, use arrow to mark the flash drive with de OS X install, press Space on keyboard and select: "Boot Mac OS X in verbose mode".
      - As usual, format your HDD or SSD as GUID and Journaled. Make more partitions if you need. Take a note of the OSX partition name you entered on Disk Utillity.
      - After that, go ahead as always and start the instalation.
      - Go in the kitchen grab some lunch. You deserve it.
       
       
      Post installation
       
      What we have so far? The system installed on your ultrabook. Now you need to get rid of bootable flash drive installing the bootloader on HDD or SSD.
       
      Installing the bootloader in internal HDD or SSD:
       
      - Boot again selecting the flash drive on Boot menu. Same you did before.
      - Now select the partition you noted early.
      - If you do everything wright, the system will start normally.
      - Now you will use the CloverEFI install package again (same options from above). This time, the target will be your OS X installed partition.
       
      Our adorable ultrabook don't boot EFI if partition on the HDD or SSD if isn't MS-DOS. We will need to format and install Clover again.
       
      - Open the Terminal and enter "sudo -s".
      - Run the command: "diskutil list".
      - Take note of what location is your EFI. Usually it is "rdisk0s1". Make sure it's correct or you loose your data.
      - Now, let's format it, now execute: "newfs_msdos -v EFI -F 32 /dev/rdiskXsX". rdiskXsX is your EFI partition location from line above.
       
      Now you need to copy all data of your flash card bootloader to the root of your new created EFI partition on internal disk.
      This EFI partition is unmounted. Mount with "diskutil mount /dev/rdiskXsX".
       
      Just restart without flash drives to test.
       
      Others Kexts:
       
      Download the kexts from the links below. I strongly recommend always use newest versions. If you are too lazy, I attach on end of the post.
       
      Ethernet: ALXEthernet
      Sound: VoodooHDA (You may have to select the output there in System Preferences)
      Battery: ACPIBatteryManager
      Bluetooth: BTFirmwareUploader
      Integrated Camera: AnyiSightCam
       
      All kexts will be placed inside /EFI/CLOVER/kexts/10.10/, mount again this partition (diskutil mount /dev/rdiskXsX) for it.
       
      Now we need to add Battery patch to a new DSDT:
       
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; And the Brightness:
       
       
       
       
       
      #Maintained by: RehabMan for: Laptop Patches #graphics_PNLF_ivy_sandy.txt # This patch enables the brightness slider in SysPrefs->Displays # and will also enable activation of sleep mode by closing # the laptop lid. # # This particular version is intended to be used with ACPIBacklight.kext # although it can also be used with AppleBacklight.kext, # provided AppleBacklight.kext is patched to recognize your # display or an injector is used to set brightness levels. # # See this thread for more information: # http://www.tonymacx86.com/hp-probook-mavericks/121031-native-brightness-working-without-blinkscreen-using-patched-applebacklight-kext.html # (also read any linked threads) # # # Note: This patch should be applied to the DSDT or SSDT that defines # your integrated graphics device (always at _ADR 0x00020000) # into_all device label PNLF remove_entry; into_all device name_adr 0x00020000 code_regex (OperationRegion\s\(RMPC,\sPCI_Config[^\}]*\}) remove_matched; into device name_adr 0x00020000 insert begin OperationRegion (RMPC, PCI_Config, 0x10, 4)\n Field (RMPC, AnyAcc, NoLock, Preserve)\n {\n BAR1,32,\n }\n Device (PNLF)\n {\n // normal PNLF declares (note some of this probably not necessary)\n Name (_ADR, Zero)\n Name (_HID, EisaId ("APP0002"))\n Name (_CID, "backlight")\n Name (_UID, 10)\n Name (_STA, 0x0B)\n //define hardware register access for brightness\n // lower nibble of BAR1 is status bits and not part of the address\n OperationRegion (BRIT, SystemMemory, And(^BAR1, Not(0xF)), 0xe1184)\n Field (BRIT, AnyAcc, Lock, Preserve)\n {\n Offset(0x48250),\n LEV2, 32,\n LEVL, 32,\n Offset(0x70040),\n P0BL, 32,\n Offset(0xc8250),\n LEVW, 32,\n LEVX, 32,\n Offset(0xe1180),\n PCHL, 32,\n }\n // DEB1 special for setting KLVX at runtime...\n //Method (DEB1, 1, NotSerialized)\n //{\n // Store(Arg0, KLVX)\n //}\n // LMAX: use 0x710 to force OS X value\n // or use any arbitrary value\n // or use 0 to capture BIOS setting\n Name (LMAX, 0x710)\n // KMAX: defines the unscaled range in the _BCL table below\n Name (KMAX, 0x710)\n // KPCH: saved value for PCHL\n Name(KPCH, 0)\n // _INI deals with differences between native setting and desired\n Method (_INI, 0, NotSerialized)\n {\n // save value of PCHL for later\n Store(PCHL, KPCH)\n // determine LMAX to use\n If (LNot(LMAX)) { Store(ShiftRight(LEVX,16), LMAX) }\n If (LNot(LMAX)) { Store(KMAX, LMAX) }\n Store(ShiftLeft(LMAX,16), KLVX)\n If (LNotEqual(LMAX, KMAX))\n {\n // Scale all the values in _BCL to the PWM max in use\n Store(0, Local0)\n While (LLess(Local0, SizeOf(_BCL)))\n {\n Store(DerefOf(Index(_BCL,Local0)), Local1)\n Divide(Multiply(Local1,LMAX), KMAX,, Local1)\n Store(Local1, Index(_BCL,Local0))\n Increment(Local0)\n }\n // Also scale XRGL and XRGH values\n Divide(Multiply(XRGL,LMAX), KMAX,, XRGL)\n Divide(Multiply(XRGH,LMAX), KMAX,, XRGH)\n }\n // adjust values to desired LMAX\n Store(ShiftRight(LEVX,16), Local1)\n If (LNotEqual(Local1, LMAX))\n {\n Store(LEVL, Local0)\n If (LOr(LNot(Local0),LNot(Local1))) { Store(LMAX, Local0) Store(LMAX, Local1) }\n Divide(Multiply(Local0,LMAX), Local1,, Local0)\n //REVIEW: wait for vblank before setting new PWM config\n //Store(P0BL, Local7)\n //While (LEqual (P0BL, Local7)) {}\n If (LGreater(LEVL, LMAX))\n { Store(KLVX, LEVX) Store(Local0, LEVL) }\n Else\n { Store(Local0, LEVL) Store(KLVX, LEVX) }\n }\n }\n // _BCM/_BQC: set/get for brightness level\n Method (_BCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n Store(Match(_BCL, MGE, Arg0, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) }\n Store(DerefOf(Index(_BCL, Local0)), LEVL)\n }\n Method (_BQC, 0, NotSerialized)\n {\n Store(Match(_BCL, MGE, LEVL, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n Return(DerefOf(Index(_BCL, Local0)))\n }\n Method (_DOS, 1, NotSerialized)\n {\n // Note: Some systems have this defined in DSDT, so uncomment\n // the next line if that is the case.\n //External(^^_DOS, MethodObj)\n ^^_DOS(Arg0)\n }\n // extended _BCM/_BQC for setting "in between" levels\n Method (XBCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n If (LGreater(Arg0, XRGH)) { Store(XRGH, Arg0) }\n If (LAnd(Arg0, LLess(Arg0, XRGL))) { Store(XRGL, Arg0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) } \n Store(Arg0, LEVL)\n }\n Method (XBQC, 0, NotSerialized)\n {\n Store(LEVL, Local0)\n If (LGreater(Local0, XRGH)) { Store(XRGH, Local0) }\n If (LAnd(Local0, LLess(Local0, XRGL))) { Store(XRGL, Local0) }\n Return(Local0)\n }\n // Use XOPT=1 to disable smooth transitions\n Name (XOPT, Zero)\n // XRGL/XRGH: defines the valid range\n Name (XRGL, 40)\n Name (XRGH, 1808)\n // KLVX is initialization value for LEVX\n Name (KLVX, 0x7100000)\n // _BCL: returns list of valid brightness levels\n // first two entries describe ac/battery power levels\n Name (_BCL, Package()\n {\n 1808,\n 479,\n 0,\n 53, 55, 57, 59,\n 62, 66, 71, 77,\n 83, 91, 99, 108,\n 119, 130, 142, 154,\n 168, 183, 198, 214,\n 232, 250, 269, 289,\n 309, 331, 354, 377,\n 401, 426, 453, 479,\n 507, 536, 566, 596,\n 627, 660, 693, 727,\n 762, 797, 834, 872,\n 910, 949, 990, 1031,\n 1073, 1115, 1159, 1204,\n 1249, 1296, 1343, 1391,\n 1440, 1490, 1541, 1592,\n 1645, 1698, 1753, 1808,\n })\n }\n end;  
       
      It's done! Now go brush your teeth!
       
       
      To do list
       
      - Turn AppleHDADisabler in CloverEFI path.
      - Fix FN keyboard keys.
      - Turn Battery DSDT patch in CloverEFI path.
      - Test Cardreader.
      - Test USB3 port.
       
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX and all others members involved directly or indirectly.
       
       
      EFI.zip
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
      BaseSystem_PLK.tool_Catalina.zip
    • By k.panic
      Hi to all!

      I've installed Yosemite on:
      - i5 4690
      - ASRock H87M Pro4 (with intel ethernet I219-V) (IntelMausiEthernet, AppleIntelE1000 and RehabMan for I219V kexts)
      - 8gb ddr3 RAM
      - 1tb hard disk
       
      If I disable I219-V from BIOS, when I shutdown it, don't reboots (tested with all kexts)
      If I enable I219-V from BIOS, when I shutdown it, the system reboots.
       
      How can I fix this? Thanks!
    • By renandesouza
      Hi guys, I recently installed OS X 10.10 Yosemite on my PC, everything was fine in the installation, video card already configured and working perfectly, the sound also had no problems, but I just can not connect to the internet, no connection with ethernet etc ... I tested some kex but it did not work.
       
      PC:
      Asus P5GC-MX/1333
      Core 2 Duo E8400 3.0 GHz 
      2GB DDR2 
      ATi HD 5450
      Realtek ALC883 HD Audio
      Atheros L2 Fast Ethernet 
       
      Network Screen Prints:

×