Jump to content
Allan

[Guia] DSDT/SSDT - Conhecimentos Gerais

90 posts in this topic

Recommended Posts

Allan obrigado por me ajudar. 

 

Este é o conteúdo da pasta.

 

/Volumes/EFI/EFI/CLOVER/drivers64UEFI

/Volumes/EFI/EFI/CLOVER/drivers64UEFI/FSInject-64.efi
/Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxAptioFix2Drv-64.efi
/Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxFatBinaryDrv-64.efi
/Volumes/EFI/EFI/CLOVER/drivers64UEFI/PartitionDxe-64.efi
/Volumes/EFI/EFI/CLOVER/drivers64UEFI/VBoxHfs-64.efi
 
O que pode estar errado ai ?

Share this post


Link to post
Share on other sites
Advertisement

O macOS Sierra está com alguns problemas com o XCPM.

 

Acredito que se tentar usar um SSDT modificado, terá melhores resultados.

 

Off-topic: Você conseguiu ativar a Nvidia GTX 670M?

 

Foi corigido o problema com o XCPM no Sierra? Não consigo ter os states todos com ele mas com o el capitan está tudo perfeito.  :w00t:

Share this post


Link to post
Share on other sites

Foi corigido o problema com o XCPM no Sierra? Não consigo ter os states todos com ele mas com o el capitan está tudo perfeito.  :w00t:

Ainda não sei te responder...

 

Não uso o Sierra, mas acredito que com a atualização do script do Pike isto possa ter sido corrigido.

Share this post


Link to post
Share on other sites

Não, apenas a ACPI_SMC_PlatformPlugin

Poxa é mesmo?

Eu me matando pra fazer ela carregar..rs

Uma vez ela até carregou mas sei como ...

 

 

A x86 Allan qual função direta dela?

 

 

Enviado do meu iPhone usando Tapatalk

Share this post


Link to post
Share on other sites

Olá à todos,

 

Por gentileza,

 

no caso de SandyBridge a Kext x86Platform_plugin é obrigatória para o funcionamento de energia adequado?

sandy ainda usa AICPUPM

Share this post


Link to post
Share on other sites

Por gentileza,

 

Não entendi muito essa questão dos States do cpu.

 

Como faço para saber quanto States meu i3 tem que apresentar?

 

 

 

Essas informações estão no site intel!?

 

Desculpem a leiguisse

Grato!

 

 

Enviado do meu iPhone usando Tapatalk

Share this post


Link to post
Share on other sites

tenta com a AppleIntelInfo do Pike

 

coloque essa kext no desktop

AppleIntelInfo.kext.zip

roda esse .command

AppleIntelInfo.kext.command.zip

e depois confira pelo terminal

sudo cat /tmp/AppleIntelInfo.dat

dê o unload na kext antes de reiniciar, essa kext causa alguns problemas

Last login: Mon Nov 20 13:11:43 on ttys001
MaLd0ns-iMac:~ mald0n$ sudo cat /tmp/AppleIntelInfo.dat
Password:
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x12b9a6a8b1fc (623 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz

Processor Signature..................... : 0x306F2
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 2
 - Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x8000000000000
------------------------------------------
 - Processor Flags...................... : 2

MSR_CORE_THREAD_COUNT............(0x35)  : 0x6000C
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x80C3BF3812100
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E000403
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x0
 - C-state Range........................ : 0 (C3 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x9474EBB16
IA32_APERF.......................(0xE8)  : 0x95BEB265C

MSR_FLEX_RATIO...................(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.............(0x198) : 0x265E00002800
------------------------------------------
 - Current Performance State Value...... : 0x2800 (4000 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2800
------------------------------------------
 - Target performance State Value....... : 0x2800 (4000 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88380000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 56
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5E0A00
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 94
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
 - SpeedShift Technology Enable......... : 0 (disabled)
 - SpeedShift Interrupt Coordination.... : 0 (disabled)
 - SpeedShift Energy Efficient Perf..... : 0 (disabled)
 - SpeedShift Technology Setup for HWP.. : No (not setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2222282828282828
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C02.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C03.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C04.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C05.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C06.......... : 28 (4000 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2104005B
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFD00014EA82
------------------------------------------
 - Package Power Limit #1............... : 3408 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 4090 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x18A594B
------------------------------------------
 - Total Energy Consumed................ : 1577 Joules (Watt = Joules / seconds)

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x912BD078F
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1A26B2A
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x912BD078F
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1A26B2A
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x2644DF1312

IA32_TSC_DEADLINE................(0x6E0) : 0x12B9AB633D9C

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)
Maximum Turbo Ratio/Frequency............: 40 (4000 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 30 40 ]
CPU C3-Cores [ 1 2 4 6 8 11 ]
CPU C6-Cores [ 2 4 6 8 10 ]
CPU P-States [ (12) 24 30 40 ]
CPU C3-Cores [ 0 1 2 4 6 8 10 11 ]
CPU C6-Cores [ 0 2 4 6 8 10 ]
CPU P-States [ (12) 20 24 30 40 ]
CPU C3-Cores [ 0 1 2 3 4 6 8 9 10 11 ]
CPU P-States [ (12) 20 24 27 30 40 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 10 11 ]
CPU P-States [ (12) 17 20 24 27 30 40 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU C6-Cores [ 0 2 4 5 6 8 9 10 ]
CPU P-States [ (12) 14 17 20 24 27 30 40 ]
CPU P-States [ (12) 14 17 19 20 24 27 30 40 ]
CPU P-States [ (12) 14 17 19 20 24 27 30 33 40 ]
CPU P-States [ (12) 14 15 17 19 20 24 27 30 33 40 ]
CPU P-States [ 12 14 15 17 19 20 24 25 27 30 33 (40) ]
CPU P-States [ (12) 14 15 17 19 20 24 25 27 29 30 33 40 ]
CPU P-States [ (12) 14 15 16 17 19 20 24 25 27 29 30 33 40 ]
CPU P-States [ (12) 14 15 16 17 19 20 24 25 27 28 29 30 33 40 ]
CPU C6-Cores [ 0 2 4 5 6 8 9 10 11 ]
CPU P-States [ (12) 14 15 16 17 18 19 20 24 25 27 28 29 30 33 40 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 24 25 27 28 29 30 33 40 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 24 25 27 28 29 30 32 33 40 ]
CPU C6-Cores [ 0 2 3 4 5 6 8 9 10 11 ]
CPU C6-Cores [ 0 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 24 25 26 27 28 29 30 32 33 40 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 30 32 33 40 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 30 31 32 33 40 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 28 29 30 31 32 33 (40) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 28 29 30 31 32 33 34 (40) ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 40 ]
MaLd0ns-iMac:~ mald0n$ 

Share this post


Link to post
Share on other sites

0:100  0:100  MemLog inited, TSC freq: 3392296458
0:100  0:000  
0:100  0:000  Now is 21.11.2017,  22:36:48 (GMT)
0:100  0:000  Starting Clover revision: 4297 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE5 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 9.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,0CD3AD23-34B5-4CA7-8CE4-40A550E52766,0x28,0x64000) @D0EC6C18
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 029E
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMV4GX3M1A1333C9  
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 029E
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMV4GX3M1A1333C9  
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'To be filled by O.E.M.' with board 'B75M-D3H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i3-2130 CPU @ 3.40GHz
0:100  0:000   The CPU not supported turbo
0:100  0:000  MSR 0x35               20004
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xCE              00001000_60012200
0:100  0:000  MSR 0x1A0             00850089
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 34.0/16
0:100  0:000  Turbo: 34/34/34/34
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 2
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1401 class=030000
0:100  0:000   - GFX: Model=Gigabyte GeForce GTX 960 family 126 (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0FBA class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:100  0:000  PCI (00|02:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:1C.04) : 8086 1E18 class=060400
0:100  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:100  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1F.00) : 8086 1E49 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 4 bytes
0:117  0:017  EFI\CLOVER\AMB.plist not loaded with name from LoadOptions: Not Found
0:131  0:013  EFI\CLOVER\config.plist loaded: Success
0:131  0:000  ---dump hibernations data---
0:131  0:000    Firmware wake address=00000000
0:131  0:000    Firmware wake 64 addr=               0
0:131  0:000    Hardware signature   =00000000
0:131  0:000    GlobalLock           =00000000
0:131  0:000    Flags                =00000000
0:131  0:000  === [ GetListOfThemes ] ===================================
0:146  0:015  - [00]: mimi black
0:152  0:005  - [01]: BGM
0:181  0:029  - [02]: EMBEDDED
0:183  0:001  - [02]: RANDOM
0:187  0:004  === [ Found config plists ] ===============================
0:187  0:000  - config.plist
0:187  0:000  === [ GetEarlyUserSettings ] ==============================
0:187  0:000  timeout set to 3
0:187  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:187  0:000  Default theme: mimi black
0:187  0:000  === [ LoadDrivers ] =======================================
0:202  0:014  Loading APFS.EFI  status=Success
0:224  0:021   - driver needs connecting
0:224  0:000  Loading FSInject-64.efi  status=Success
0:226  0:002  Loading OsxFatBinaryDrv-64.efi  status=Success
0:228  0:001  Loading HFSPlus.efi  status=Success
0:230  0:001   - driver needs connecting
0:230  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:231  0:001  2 drivers needs connecting ...
0:231  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:231  0:000  HFS+ driver loaded
0:231  0:000  APFS driver loaded
0:231  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:437  0:205  === [ InitScreen ] ========================================
0:437  0:000  SetMaxResolution: found best mode 2: 1024x768
0:437  0:000   - already set
0:437  0:000  Console modes reported: 4, available modes:
0:437  0:000   - [01]: 80x25 (current mode)
0:437  0:000   - [03]: 100x31
0:437  0:000   - [04]: 128x30
0:437  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,0CD3AD23-34B5-4CA7-8CE4-40A550E52766,0x28,0x64000)
0:438  0:000  Using embedded font: Success
0:438  0:000  === [ GetMacAddress ] =====================================
0:438  0:000  MAC address of LAN #0= 90:2B:34:F3:04:E9:
0:438  0:000  === [ ScanSPD ] ===========================================
0:438  0:000  SMBus device : 8086 1E22 class=0C0500 status=Success
0:438  0:000  SMBus CmdReg: 0x1
0:438  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7215004, ioport: 0xF000, hostc: 0x1
0:438  0:000  Slots to scan [8]...
0:439  0:000  SPD[1]: Type 11 @0x51
0:457  0:018  Not using XMP because it is not present
0:457  0:000  DDR speed 1333MHz
0:457  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMV4GX3M1A1333C9 SerialNo=0000000000000000
0:458  0:000  SPD[3]: Type 11 @0x53
0:476  0:018  Not using XMP because it is not present
0:476  0:000  DDR speed 1333MHz
0:476  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMV4GX3M1A1333C9 SerialNo=0000000000000000
0:477  0:000  === [ GetAcpiTablesList ] =================================
0:477  0:000  Get Acpi Tables List from RSDT:
0:477  0:000   - [00]: FACP  A M I len=132
0:477  0:000   - [01]: APIC  A M I len=114
0:477  0:000   - [02]: MCFG  A M I len=60
0:477  0:000   - [03]: HPET  A M I len=56
0:477  0:000   - [04]: SSDT  SataTabl len=877
0:477  0:000   - [05]: SSDT  Cpu0Ist len=2474
0:477  0:000   - [06]: SSDT  CpuPm len=2706
0:477  0:000   - [07]: BGRT  A M I len=56
0:477  0:000  Calibrated TSC Frequency = 3392296458 = 3392MHz
0:477  0:000  === [ GetUserSettings ] ===================================
0:477  0:000  USB FixOwnership: yes
0:477  0:000   - final DSDT Fix mask=00000000
0:477  0:000  PluginType: 1
0:477  0:000  Using ProductName from config
0:477  0:000  ProductName: iMac12,1
0:477  0:000  Found same BiosVersion in clover and config
0:477  0:000  BiosVersion: IM121.88Z.004D.B00.1708080012
0:477  0:000  BiosReleaseDate: 08/08/17
0:477  0:000  Using FirmwareFeatures from config
0:477  0:000  FirmwareFeatures: 0xE00DE137
0:477  0:000  Using FirmwareFeaturesMask from config
0:477  0:000  FirmwareFeaturesMask: 0xFF1FFF3F
0:477  0:000  PlatformFeature: 0xFFFF
0:477  0:000  Board-ID set from config as Mac-942B5BF58194151B
0:477  0:000  BoardType: 0xA
0:477  0:000  ChassisType: 0xD
0:685  0:207  === [ ScanVolumes ] =======================================
0:685  0:000  Found 10 volumes with blockIO
0:685  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x1,0x0)
0:686  0:001          Result of bootcode detection: bootable Windows (vista,win)
0:686  0:000          USB volume
0:686  0:000          USB volume
1:285  0:599  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
1:286  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
1:286  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,0CD3AD23-34B5-4CA7-8CE4-40A550E52766,0x28,0x64000)
1:287  0:000          Result of bootcode detection: bootable unknown (legacy)
1:311  0:023          This is SelfVolume !!
1:311  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,C9D922D4-8FB6-421A-998E-EDA054B35B07,0x64028,0x172A7C80)
1:316  0:004  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(3,GPT,BB28D7D4-EAA7-447B-B5D0-F63F5687D652,0x1730BCA8,0x135F20)
1:335  0:019  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(4,GPT,8719E574-76B9-486A-889D-5941F082C651,0x17442000,0x8000)
1:336  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(5,GPT,55DBD59E-F79A-488C-BB44-16F2A9289355,0x1744A000,0xBA85800)
1:336  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:336  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(6,GPT,862EE248-3855-46AB-AA60-7FB9995E3CED,0x22ECF8B8,0x17476750)
1:337  0:000          Result of bootcode detection: bootable unknown (legacy)
1:337  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x1CEBFA7E,0x2,0x3A38602E)
1:337  0:000          Result of bootcode detection: bootable unknown (legacy)
1:337  0:000  === [ InitTheme ] =========================================
1:388  0:050  Using theme 'mimi black' (EFI\CLOVER\themes\mimi black)
1:388  0:000  OS main and drive as badge
1:390  0:001  Loading font from ThemeDir: Success
1:390  0:000  Choosing theme mimi black
1:390  0:000  found boot-args in NVRAM:, size=1
1:391  0:000  after NVRAM boot-args=
1:391  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:391  0:000  no AppleSMC protocol
1:435  0:043  === [ ScanLoader ] ========================================
1:435  0:000  - [00]: ''
1:454  0:019  - [03]: 'EFI'
1:552  0:097          AddLoaderEntry for Volume Name=EFI
1:564  0:012  - [04]: 'macOS'
1:594  0:029          AddLoaderEntry for Volume Name=macOS
1:607  0:012      Check if volume Is Hibernated:
1:607  0:000      Check sleep image 'by signature':
1:686  0:078      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:686  0:000      using default sleep image name = \private\var\vm\sleepimage
1:709  0:023      sleepimage not found -> Not Found
1:709  0:000      hibernated: no - sign
1:727  0:018  - [05]: 'Recovery HD'
1:748  0:020          AddLoaderEntry for Volume Name=Recovery HD
1:796  0:048  Scanning legacy ...
1:796  0:000   0: '' (vista,win) add legacy
1:798  0:001   added 'Windows' OSType=2 Icon=vista,win
1:798  0:000   7: 'Legacy HD5' (vista,win) add legacy
1:798  0:000   added 'Windows' OSType=2 Icon=vista,win
1:798  0:000  === [ AddCustomTool ] =====================================
1:826  0:027  found tool \EFI\CLOVER\tools\Shell64U.efi
1:826  0:000  Checking EFI partition Volume 3 for Clover
1:826  0:000   Found Clover
1:829  0:003  === [ GetEfiBootDeviceFromNvram ] =========================
1:830  0:000   - found entry 1. 'macOS', Volume 'macOS', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,C9D922D4-8FB6-421A-998E-EDA054B35B07,0x64028,0x172A7C80)\System\Library\CoreServices\boot.efii'
1:830  0:000  DefaultIndex=1 and MainMenu.EntryCount=11
1:879  0:048  GUI ready
5:879  4:000  === [ StartLoader ] =======================================
5:879  0:000  Finally: ExternalClock=24MHz BusSpeed=99773kHz CPUFreq=3392MHz PIS: hw.busfrequency=96000000Hz
5:879  0:000  Loading boot.efi  status=Success
5:934  0:054  GetOSVersion: 10.13.1 (17B48)
5:934  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
5:934  0:000  Will not patch boot.efi
5:934  0:000  === [ PatchSmbios ] =======================================
5:934  0:000  insert table 9 for dev 0:0
5:934  0:000  insert table 9 for dev 0:1
5:934  0:000  insert table 9 for dev 0:0
5:934  0:000  insert table 9 for dev 0:0
5:934  0:000  Not trusting SMBIOS because it's being sneaky...
5:934  0:000  Channels: 2
5:934  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
5:934  0:000  SMBIOS Type 17 Index = 0 => 0 0:
5:934  0:000  BANK 0 DIMM0 EMPTY
5:934  0:000  SMBIOS Type 17 Index = 1 => 2 2:
5:934  0:000  BANK 1 DIMM0 EMPTY
5:934  0:000  SMBIOS Type 17 Index = 2 => 1 1:
5:934  0:000  BANK 0 DIMM1 1333MHz 4096MB
5:934  0:000  SMBIOS Type 17 Index = 3 => 3 3:
5:934  0:000  BANK 1 DIMM1 1333MHz 4096MB
5:934  0:000  mTotalSystemMemory = 8192
5:934  0:000  NumberOfMemoryDevices = 4
5:934  0:000  Type20[0]->End = 0x7FFFFF, Type17[3] = 0x2000
5:934  0:000  Type20[1]->End = 0x3FFFFF, Type17[2] = 0x3000
5:934  0:000  Table 131 is present, CPUType=31
5:934  0:000  Change to: 903
5:934  0:000  === [ PatchACPI ] =========================================
5:934  0:000  RSDT 0xDD0FB028
5:934  0:000  FADT from RSDT: 0xDD0FB0E8
5:934  0:000  XSDT 0xDD0FB070
5:934  0:000  FADT from XSDT: 0xDD104F80
5:934  0:000  Xsdt reallocation done
5:934  0:000  old FADT length=F4
5:934  0:000   SignatureFixup: 0x0 -> 0
5:935  0:001  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
5:959  0:023  Apply DsdtFixMask=0x00000000
5:959  0:000     drop _DSM mask=0xFFFF
5:959  0:000  === [ FixBiosDsdt ] =======================================
5:959  0:000  VideoCard devID=0x140110DE
5:959  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
5:959  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
5:959  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
6:113  0:154  Found Airport Atheros at 0x1C0000, 0x0, DeviceID=0x0030
6:114  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
6:114  0:000  first CPU found at 7699 offset 769C
6:114  0:000  score candidate at 7695
6:114  0:000  score inserted in acpi_cpu_score _PR_
6:114  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
6:114  0:000  Found PCIROOTUID = 0
6:114  0:000  === [ ACPIDropTables ] ====================================
6:114  0:000  === [ DropSSDT ] ==========================================
6:114  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
6:114  0:000   Xsdt has tables count=8
6:114  0:000   Table: SSDT  SataTabl  877 dropped
6:114  0:000   Table: SSDT  Cpu0Ist  2474 dropped
6:114  0:000   Table: SSDT  CpuPm  2706 dropped
6:114  0:000  === [ ACPIPatchedAML ] ====================================
6:114  0:000  Unsorted
6:114  0:000  Inserting SSDT.AML from EFI\CLOVER\ACPI\patched ... Success
6:122  0:008  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
6:122  0:000  === [ RestSetup macOS ] ===================================
6:122  0:000  EdidDiscovered size=0
6:122  0:000  NVidia GFX injection not set
6:277  0:154   codec not detected
6:278  0:000  stringlength = 2206
6:278  0:000  CurrentMode: Width=1024 Height=768
6:278  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D0EC6918
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D0EC6918
6:289  0:011  Use origin smbios table type 1 guid.
6:296  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
6:296  0:000  Extra kext: EFI\CLOVER\kexts\Other\CodecCommander.kext
6:313  0:017  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext
6:343  0:029    |-- PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
6:514  0:170  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
6:561  0:047  Extra kext: EFI\CLOVER\kexts\Other\NvidiaGraphicsFixup.kext
6:573  0:012  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext
6:585  0:011  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
6:587  0:002  Custom boot is disabled

Last login: Tue Nov 21 21:12:30 on ttys000
iMac:~ edgar$ sudo cat /tmp/AppleIntelInfo.dat
Password:
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x6a37738e148 (214 MHz)
MWAIT C-States...........................: 4384

Processor Brandstring....................:         Intel(R) Core(TM) i3-2130 CPU @ 3.40GHz

Processor Signature..................... : 0x206A7
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 7
 - Model................................ : 0x2A (42)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x4000000000000
------------------------------------------
 - Processor Flags...................... : 1

MSR_CORE_THREAD_COUNT............(0x35)  : 0x20004
------------------------------------------
 - Core Count........................... : 2
 - Thread Count......................... : 4

MSR_PLATFORM_INFO................(0xCE)  : 0x100060012200
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x22 (3400 MHz)
 - Ratio Limit for Turbo Mode........... : 0 (not programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 16

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000403
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x168E87D7CC6
IA32_APERF.......................(0xE8)  : 0x148926C10A5

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x25F300002200
------------------------------------------
 - Current Performance State Value...... : 0x2200 (3400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2200
------------------------------------------
 - Target performance State Value....... : 0x2200 (3400 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88400000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 64
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x661400
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 102
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
 - SpeedShift Technology Enable......... : 0 (disabled)
 - SpeedShift Interrupt Coordination.... : 0 (disabled)
 - SpeedShift Energy Efficient Perf..... : 0 (disabled)
 - SpeedShift Technology Setup for HWP.. : No (not setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222222
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 22 (3400 MHz) 
 - Maximum Ratio Limit for C02.......... : 22 (3400 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x4
------------------------------------------

MSR_POWER_CTL....................(0x1FC) : 0x4005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA1003
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 16 (15.3 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x14A58000149F40
------------------------------------------
 - Package Power Limit #1............... : 1000 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 1200 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 10 (2560 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x5912925E
------------------------------------------
 - Total Energy Consumed................ : 22802 Joules (Watt = Joules / seconds)

MSR_PP0_CURRENT_CONFIG...........(0x601) : 0x1814149400000960

MSR_PP0_POWER_LIMIT..............(0x638) : 0x14A580
------------------------------------------
 - Power Limit.......................... : 1200 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 10 (10240 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PP0_ENERGY_STATUS............(0x639) : 0x2F0109C4
------------------------------------------
 - Total Energy Consumed................ : 12033 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x14A580
------------------------------------------
 - Power Limit.......................... : 1200 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 10 (10240 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PP0_ENERGY_STATUS............(0x639) : 0x2F0117E7
------------------------------------------
 - Total Energy Consumed................ : 12033 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x8850
MSR_PKGC6_IRTL...................(0x60b) : 0x8868
MSR_PKGC7_IRTL...................(0x60c) : 0x886D
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x19CEA2C4946
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x3C37D396
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x19CEA2C4946
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x3C37D396
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x2AF7B6B3E18
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x6A3A6BC0DAA

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 16 (1600 MHz)
Maximum non-Turbo Ratio/Frequency........: 34 (3400 MHz)
Maximum Turbo Ratio/Frequency............: 34 (3400 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 31 (34) ]
CPU C3-Cores [ 0 1 2 ]
CPU C6-Cores [ 0 2 3 ]
CPU P-States [ (16) 26 31 34 ]
CPU C3-Cores [ 0 1 2 3 ]
CPU P-States [ 16 26 31 32 (34) ]
CPU C6-Cores [ 0 1 2 3 ]
CPU P-States [ (16) 20 26 31 32 34 ]
CPU P-States [ (16) 20 25 26 31 32 34 ]
CPU P-States [ (16) 20 24 25 26 31 32 34 ]
CPU P-States [ (16) 20 23 24 25 26 31 32 34 ]
CPU P-States [ (16) 20 21 23 24 25 26 31 32 34 ]
CPU P-States [ (16) 20 21 23 24 25 26 28 31 32 34 ]
CPU P-States [ 16 20 21 23 24 25 26 28 29 31 32 (34) ]
CPU P-States [ 16 20 21 23 24 25 26 27 28 29 31 32 (34) ]
CPU P-States [ (16) 20 21 23 24 25 26 27 28 29 31 32 33 34 ]
CPU P-States [ (16) 20 21 23 24 25 26 27 28 29 30 31 32 33 34 ]
CPU P-States [ (16) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 ]
iMac:~ edgar$ 

Olá MaLd0n!

Obrigado pela dica,

Fiz os steps e esse foi o resultado, 

Como saber se está certo ou errado para meu CPU?

 

 

Tirei um print do meu IOREG  e do BOOT.log também, me parece que está adequado, conforme o Allan dá o exemplo no tutorial

Estou certou ou falo besteira?

 

Muito obrigado

Vlw

post-1217335-0-03897600-1511307483_thumb.png

Share this post


Link to post
Share on other sites

veja os pstates

CPU P-States [ (16) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 ]

 

16 = 1600, é a frequência mínima do seu processador, enquanto o 34 é a frequência máxima, 3400, mas veja que falta alguns pstates, mas nada demais

 

roda o geekbench e veja qual o resultado

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with patches for Skylake DSDT.MaLd0n ASUS Z170M PLUS.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DMAC -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -IMEI -PNLF -HDMI --FakeSMC
      http://www.hwsensors.com/releases   --Audio https://github.com/vit9696/AppleALC   --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By MaLd0n
      First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan and Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install EL Capitan / Sierra / High Sierra and boot into system! for Sierra/High Sierra you need a Processor with SSE4.1 instruction   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time! -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) and tell me what your hardware! -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    My DSDT GA P35-DS3 DSDT.MaLd0n LGA775.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      First... If you need DSDT edits... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   -DSDT My DSDT DSDT.GA H97M-DS3P MaLd0n.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF -HDMI





      -FakeSMC
      https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      --Install Follow my tutorial and use my Clover folder http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/ CLOVER Install.zip   --Post Install --Install Clover bootloader and replace with my folder CLOVER Post Install.zip   Bingo!   Now you need a fine tune! DSDT time!   If you need edited DSDT... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app     -DSDT bios F23 My DSDT  DSDT.MaLd0n GA X99-UD3P.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -IMEI -SHUTDOWN -LAN -SPSR -EC -PNLF -HDMI


      e.g

       
      -Clover https://sourceforge.net/projects/cloverefiboot/files/Installer/ -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, nmano and many, many, many others!   We're all here to have fun and learn from each other!  
×