Jump to content
Dontview

Gigabyte GA-Z87-D3HP DSDT Help

22 posts in this topic

Recommended Posts

Hey Guys,

i am trying to create my own DSDT but i am very inexperienced.
The reason for this effort is that i found a dsdt hack for my HD 7850 here.

Anyway I am getting a lot of compiling errors. Some of them i have already fixed  by myself.
Any help would be very appreciated.

Thank you

ntel ACPI Component Architecture
ASL Optimizing Compiler version 20091214 [Dec 16 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 4.0

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  3194:                         Acquire (MUT0, 0x0FFF)
Warning  1105 -                                                                           Possible operator timeout is ignored ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  6609:         Method (RDGI, 1, NotSerialized)
Warning  1088 -                                                  Not all control paths return a value ^  (RDGI)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  6626:         Method (RDGP, 1, NotSerialized)
Warning  1088 -                                                  Not all control paths return a value ^  (RDGP)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  7770:             Method (_DEP, 0, NotSerialized)
Warning  1099 -                                                                     Unknown reserved name ^  (_DEP)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  7784:                     Return (Package (0x00) {})
Remark   5072 -                                                                       Effective AML package length is zero ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  9000:                         Buffer (0x00) {}
Remark   5008 -                                                                   Effective AML buffer length is zero ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  9048:                 Method (_DEP, 0, NotSerialized)
Warning  1099 -                                                                         Unknown reserved name ^  (_DEP)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl  9062:                         Return (Package (0x00) {})
Remark   5072 -                                                                           Effective AML package length is zero ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 10089:             Arg0
Error    4096 -                                             syntax error, unexpected PARSEOP_ARG0 ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 10089:             Arg0
Warning  1100 -                                                          Statement is unreachable ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 10569:     Method (SPL1, 0, Serialized)
Warning  1088 -                                              Not all control paths return a value ^  (SPL1)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 11115:                 Return (RDGP (0x57))
Warning  1093 -                                                   Called method may not always return a value ^ 

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 12149:         Method (_HID, 0, NotSerialized)
Warning  1088 -                                                  Not all control paths return a value ^  (_HID)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 12149:         Method (_HID, 0, NotSerialized)
Warning  1081 -                                                   Reserved method must return a value ^  (_HID)

/Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 12547:                 Name (XMPT, Buffer (0x0000) {})
Remark   5008 -                                                                         Effective AML buffer length is zero ^ 

ASL Input:  /Users/timo/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl - 12800 lines, 419081 bytes, 5212 keywords
Compilation complete. 1 Errors, 10 Warnings, 4 Remarks, 77 Optimizations

dsdt.zip

Share this post


Link to post
Share on other sites
Advertisement

Thank you!! It seems to work  :thumbsup_anim: 

I got this clover debug code:
 

6:828  0:022  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\dsdt.aml
6:848  0:020  page is allocated, write DSDT into
6:861  0:013  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
6:925  0:063  Apply DsdtFixMask=0x00000000 old way
6:940  0:015     drop _DSM mask=0x0000
6:954  0:013  ========= Auto patch DSDT Starting ========
6:968  0:013  VideoCard devID=0x4128086
6:981  0:013  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
6:995  0:013  Display 0 is  notPCIE
7:009  0:013  USBADR[0] = 0x140000 and PCIe = 0xFFFE
7:022  0:013  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
7:289  0:266  Found Airport Atheros at 0x1C0001, 0x0
7:302  0:013  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
7:316  0:013  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
7:439  0:123  Found PCIROOTUID = 0
7:452  0:013  ========= Auto patch DSDT Finished ========

My question now: Since clover is patching stuff by itself, is there anything else I need to do? Or is this dsdt just fine now?

Share this post


Link to post
Share on other sites

Did that. So everything should be fine :).

Thank you very much. I am going to edit the dsdt.aml after my HD 7850 has arrived :)
 

Share this post


Link to post
Share on other sites

All right then.

Unfortunately my new graphic card didn't arrive yet.
I should be here tomorrow or the day after tomorrow.

Thanks for your help, I'll post the ioreg as soon as possible :)

Share this post


Link to post
Share on other sites

Ok, here is my new IOReg (without DSDT).

I use inject ATI via clover (Or shouldn't i do this?). Otherwise and without DSDT I have some graphic glitches.
With DSDT and inject ATI i have graphics acceleration etc :) and everything works like a charm!

 

IOReg 2.zip

Share this post


Link to post
Share on other sites

Sorry to bother you again. But i had to change the PCI-E Slot.
It is now on the second one.

Could you help me to prepare my DSDT again? It still is the same dsdt.aml like in the beginning of this thread.

Thank you so much!

 

Share this post


Link to post
Share on other sites

Why you have changed to second PCI-E? 

I think the Graphics Card not work well, the second slot have a link speed x4 (only used for second card in crossfire), first slot is x16 (used for single card)

Share this post


Link to post
Share on other sites

Hey,

thanks for your quick response. To be honest: I have simply overlooked this fact. Anyway, i changed everything to my old configuration. 
Although, maybe it is useful for future projects, that this configuration worked with injected kext. 

I had to change it in the first place, because of heat issues. I was hoping to fix it by changing the position of my gc. In the end, i bought a new Tower with cable and heat management. 
Now everything looks fine. 
 

Thanks for your help,
have a nice weekend.

 

Share this post


Link to post
Share on other sites

Hey Carbo,


 


sorry i didn’t answer. I was quite busy. 


 


I tried your new DSDT and i didn’t work either. Same result as the DSDT bevor :/


Share this post


Link to post
Share on other sites

Works like a charm. I just have to add "USB-Fix" via Clover in order to have keyboard support after sleep. :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Install MacOS with Olarila Image, Step by Step, Install and Post Install  
      https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Install Sierra/High Sierra and boot into system!   Post Installation   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.GA H110M-S2.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Current EFIs 
      Updated 26/03/2020
      PLEASE NOTE - You MUST update to the latest Clover EFI before updating to 10.15.4 or you may find your unable to update.
       
      Clover EFI Updated 26/03/20 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Clover Z390 Master Vega Navi EFI 260320.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 260320.zip - R5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (03/03/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (03/03/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Disabled
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on Catalina 10.15.4 and Clover EFI 5104 (Catalina Patcher)
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman Voodoo PS2 Controller (here) acidanthera AppleALC (here) acidanthera Lilu (here) acidanthera VirtualSMC (here) acidanthera SMCBatteryManager (here) acidanthera SMCLightSensor (here) acidanthera WhateverGreen (here) Mieze Realtek RTL8111 (here)
    • By ludufre
      Installing macOS Catalina 10.15.4 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      03/24/2020 20:23h GMT-0
      - Update instructions 10.15.4.
       
      01/30/2020 23:54h GMT-0
      - Update instructions 10.15.3.
       
      12/11/2019 03:58h GMT-0
      - Update instructions 10.15.2.
      - Updated EFI folder attached.
       
      11/30/2019 18:03h GMT-0
      - Changed Device -> Graphics platform to fix dual HDMI monitor.
      - Updated EFI folder and config.plist
       
      11/29/2019 21:28h GMT-0
      - Added full EFI folder as requested.
       
      11/27/2019 02:33h GMT-0
      - Added BIOS profiles for ease.
       
      11/25/2019 22:45h GMT-0
      - Fixed wrong ethernet link (IntelMausi.kext).
      - Thanks to @MiMoHo
       
      11/24/2019 04:56h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Empty
       
      What you need to install
       
      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction  This will take about 30 minutes.
       


      Install bootloader
       
      Download the CloverEFI from official repository (used 5099) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (If you are going to use NVMe)
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.8.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCSuperIO.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the IntelMausi.kext from here. I used the version 1.0.2.
      - Download the SmallTree-Intel-211-AT-PCIe-GBE.kext attached bellow to enable second ethernet.
       
      Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock (Geekbench 4: 5840/27384) and another with overclock [5.0 GHz] (Geekbench 4: 6360/30348)
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup
       
      Then:
      - Now, hold the F12
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.

       
      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at least four time.
       
       
      10.15.3
       
      Updated with success without changing anything.
       
       
      10.15.4
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.2.
      - WhateverGreen.kext. I used version 1.3.7.
      - AppleALC.kext. I used version 1.4.7.
      - VirtualSMC.kext. I used version 1.3.7.
      (all download links above)
       
      Download the latest CLOVER installer. I used version 5107.
      - Install respecting the configuration mentioned above in "Install bootloader" section.
       
      Install update. Will reboot at least four time.
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
      Attachments
       
      config.plist v2.zip
      EFI v4.zip
      Filevault 2 additional drivers.zip
      SmallTree-Intel-211-AT-PCIe-GBE.kext.zip
      SSDTs.zip
      MACOS_5GHZ
      MACOS_STOCK
       
       
       
×