Jump to content
Tino2

H87I Plus - sleep reboot Problems

8 posts in this topic

Recommended Posts

Dear Members

 

I have a Asus H87I Plus and it works really well and stable. I have an edited Dsdt which works good for the audio and Graphics. Speedstep is working on 3 Steps (Idle 8, Normal 31, Turbo 35). There is no Graphicscard in the System right now.

 

The Problem with sleep is the computers shut itself off, but after 2 seconds it turns it self on again. It won't boot up instead it makes 2 on and off loops and then it reboots to osx. I already tried to turn off WOL in the Bios but it looks like this is not the Problem.

 

Might im just totally off, but i couldn't find any similar behaviour in the internet. If someone has a Clue what might cause this it would be nice to get some hints.

 

Greets

 

System H87I Plus, I7 4770s,

DSDT H87I.zip

Share this post


Link to post
Share on other sites
Advertisement

The Problem with sleep is the computers shut itself off, but after 2 seconds it turns it self on again. 

Delete 2 lines, below, from the dsdt.  Compile, for the compile errors, "Name already exists...", delete those lines as well.  Compile, save as ACPI Machine Language Binary and install.

        Store (0x8000000C, \_SB.PINX)
        \_SB.ISMI (0x90)

Share this post


Link to post
Share on other sites

Thank you this solved the automatic restart issue, the computer enters sleep mode well.

 

On problem ist still there,  if i wake it up  the status light changes and the HDD Led shows activity. But there is no display signal, after 5 seconds the computer reboots.

Share this post


Link to post
Share on other sites

OSX 10.9.2 solved the rest of the sleep Problem.

 

Thanks for the support, the Asus H87I Plus runs now fine. Sound and Lan need Kexts everything else oob. :)

Share this post


Link to post
Share on other sites

Thanks, its working fine now.

 

To mention for builders, the DVI Port must be used, HDMI works only in Combination with the DVI.

Share this post


Link to post
Share on other sites

Additional Info for the H87I with sleep failures:

 

Pmset -g  

 

--> If autopoweroff=1 disable it with

 

sudo pmset -c autopoweroff 0

Share this post


Link to post
Share on other sites

Have the same problem on my ASUS B85G-M (intel B85) with a i7 4770... The system restarts after waking up. The immediate wakeup is removed since I also removed the 2 lines from dsdt like toleda suggested.

 

But the system still restarts after wakeup. I use 10.9.4 and Clover.  

 

Here is my DSDT for ASUS B85G-M. Everything seems to work good, AppleLPC is loaded and IntelGraphics HD4600 has proper power management using AGPM:

 DSDT.aml.zip

 

In clover I use the kexts:

- NullCPUPM (since I use kernel CPU PM)

- recent GenericUSBXHCI (I already tried boot arg switches "-gux_defer_usb2" and "-gux_no_idle" without any effect)

 

In clover config I enabled:

- AsusCPUPM / AppleCPUPM patch

- Kernel CPU PM patch / also patched the kernel 

 

I use an ATI HD5570 with Eulemur personality which seems to work out of the box. Display standby works fine.

 

Toleda, could you take a look on my config ? 

 

Regards

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By manmo71
      I am a novice in the field of Hackintosh, and this is my first post here.
       
      I have managed to setup and install my hackintosh and it is perfectly working other than this one issue.
      I am unable to figure the exact cause of this issue. My Hackintosh is unable to go into sleep mode after the set time. This is what happens (see the attached video file).
       
       

      mojavesleep.mp4  
      You can see that the screen turns off, then I see the power on the graphics card and fans turn off.
      Immediately it comes back ON and the screen TURN's ON.
       
      I have followed various threads in several forums trying various options suggested for sleep related issue, but have been un-successful.
      If anyone is able to guide me through in resolving this issue, I would appreciate that.
       
      I am unsure what files need to be attached for you people to help me, feel free to ask and I shall upload the necessary files.
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By Jonas
      Hi,
       
      I have High Sierra 10.13.6 installed on a Gigabyte h360m d3h, an i3 8100 processor and a GeForce GTX 760.
       
      I'm having some issues with sleep, shutdown and reboot not working correctly, this is what happens:
      Sleep: the machine restarts
      Shutdown: the OS appears to not be running but the machine is left on
      Restart: the same as shutdown
       
      Everything else (audio, video, usb) appears to be working correctly.
       
      Do you know how can I fix this?
       
      I'm attaching my config.plist and clover bootlog
       
      config.plist
      bootlog.txt
×