Jump to content
Slice

AmdCPUMonitor and HWSensors 3.3.1

110 posts in this topic

Recommended Posts

Macs-Mac-Pro:~ mac$ kextstat -l | egrep -v "com.apple" 

 14    4 0xffffff7f80cc4000 0xd000     0xd000     org.netkas.FakeSMC (3.3.1) <10 7 5 4 3>

   15    0 0xffffff7f80d12000 0x5000     0x5000     org.mozodojo.ITEIT87x (1.0.3) <14 7 5 4 3>

   20    0 0xffffff7f8138c000 0x3000     0x3000     org.slice.HWInfo (1) <14 7 4 3>

   88    0 0xffffff7f80cd1000 0x6000     0x6000     org.slice.RadeonMonitor (1.0.0d1) <14 11 7 4 3>

   89    0 0xffffff7f8200b000 0x2000     0x2000     org.slice.sensor.AmdCPUMonitor (1.0) <14 11 7 4 3>

 

still won't display stat with bronya rc7 fix on 10.9.4(13E19), but on 10.9.4(13E16) works well

Share this post


Link to post
Share on other sites
Advertisement

 

Macs-Mac-Pro:~ mac$ kextstat -l | egrep -v "com.apple" 
 14    4 0xffffff7f80cc4000 0xd000     0xd000     org.netkas.FakeSMC (3.3.1)
   15    0 0xffffff7f80d12000 0x5000     0x5000     org.mozodojo.ITEIT87x (1.0.3)
   20    0 0xffffff7f8138c000 0x3000     0x3000     org.slice.HWInfo (1)
   88    0 0xffffff7f80cd1000 0x6000     0x6000     org.slice.RadeonMonitor (1.0.0d1)
   89    0 0xffffff7f8200b000 0x2000     0x2000     org.slice.sensor.AmdCPUMonitor (1.0)
 
still won't display stat with bronya rc7 fix on 10.9.4(13E19), but on 10.9.4(13E16) works well

 

sorry, what is "display stat"?

Share this post


Link to post
Share on other sites

xeocacad

I had same problem for some time. And tbh i'm not exactly sure what fixed it - i just walked through installation process again and then it worked...

Share this post


Link to post
Share on other sites

xeocacad

I had same problem for some time. And tbh i'm not exactly sure what fixed it - i just walked through installation process again and then it worked...

I encountered a problem when I did the update to version 10.9.4 (13E19)

Share this post


Link to post
Share on other sites

only show hard drive 

 

http://prntscr.com/3vuib0

 

 

I encountered a problem when I did the update to version 10.9.4 (13E19)

I may answer you when official 10.9.4 will take place.

 

EDITED 02.07.2014.

Official release 10.9.4 (13E28) arrived.

All works as it should. Nothing changed.

Share this post


Link to post
Share on other sites

Hello Slice

 

Question: where can I find information

Thanks

 

Fabio

Sorry, it seems there are no final instructions anywhere.

The development topic here

A working sample

DSDT

                Device (FSAM)
                {
                    Name (_HID, EisaId ("APP0111"))
                    Name (_CID, "monitor")

                    Method (TCRR, 0, NotSerialized)
                    {
                        Return (TCRK)
                    }
 
                    Method (TCRW, 1, NotSerialized)
                    {
                        Store (Arg0, TCRK)
                        Return (TCRK)
                    }
 
                    Method (TCPU, 0, NotSerialized)
                    {
                        Store (\_TZ.THM._TMP (), Local0)
                        Return (Local0)
                     }
                 }
And the plugin info.plist is

			<key>keysToAdd</key>
			<dict>
				<key>TCRR</key>
				<string>TA0P</string>
				<key>TCRW</key>
				<string>TA1P</string>
			</dict>

It means that ACPI method TCRR will produce SMC key TA0P which is Ambient temperature.

Predefined methods

Name    Value                        SMC key
FANx       measures RPM                 FxAC   (x=0..9)
FTNx    measure time or rotation            FxAC   (x=0..9)
TCPU    CPU_HEATSINK_TEMPERATURE    Th0H
TSYS    NORTHBRIDGE_TEMPERATURE        TN0P
TDIM    DIMM_TEMPERATURE            Tm0P
TAMB    AMBIENT_TEMPERATURE            TA0P
TCPP    CPU_PROXIMITY_TEMPERATURE    TC0P
VCPU    CPU_VOLTAGE                    VC0C
VMEM    MEMORY_VOLTAGE                VM0R
VSNx    ???                            VpyC (x=1..3, y=x-1)
ISN0    AMPERAGE                    ICAC
ISNx    AMPERAGE                    IpyC (x=1..3, y=x-1)
PSNx    WATTAGE                        PCxC (x=0,1)
ACDC    AC Adapter                    ACEN, ACFP, ACIN
BAK0    Battery                        B0AC
BAK1    Battery                        B0AV
If you will have more questions then I can look into sources what is what and how it works.

Share this post


Link to post
Share on other sites

Sorry, it seems there are no final instructions anywhere.

The development topic here

A working sample

DSDT

                Device (FSAM)
                {
                    Name (_HID, EisaId ("APP0111"))
                    Name (_CID, "monitor")

                    Method (TCRR, 0, NotSerialized)
                    {
                        Return (TCRK)
                    }
 
                    Method (TCRW, 1, NotSerialized)
                    {
                        Store (Arg0, TCRK)
                        Return (TCRK)
                    }
 
                    Method (TCPU, 0, NotSerialized)
                    {
                        Store (\_TZ.THM._TMP (), Local0)
                        Return (Local0)
                     }
                 }
And the plugin info.plist is

			<key>keysToAdd</key>
			<dict>
				<key>TCRR</key>
				<string>TA0P</string>
				<key>TCRW</key>
				<string>TA1P</string>
			</dict>

It means that ACPI method TCRR will produce SMC key TA0P which is Ambient temperature.

Predefined methods

Name    Value                        SMC key
FANx       measures RPM                 FxAC   (x=0..9)
FTNx    measure time or rotation            FxAC   (x=0..9)
TCPU    CPU_HEATSINK_TEMPERATURE    Th0H
TSYS    NORTHBRIDGE_TEMPERATURE        TN0P
TDIM    DIMM_TEMPERATURE            Tm0P
TAMB    AMBIENT_TEMPERATURE            TA0P
TCPP    CPU_PROXIMITY_TEMPERATURE    TC0P
VCPU    CPU_VOLTAGE                    VC0C
VMEM    MEMORY_VOLTAGE                VM0R
VSNx    ???                            VpyC (x=1..3, y=x-1)
ISN0    AMPERAGE                    ICAC
ISNx    AMPERAGE                    IpyC (x=1..3, y=x-1)
PSNx    WATTAGE                        PCxC (x=0,1)
ACDC    AC Adapter                    ACEN, ACFP, ACIN
BAK0    Battery                        B0AC
BAK1    Battery                        B0AV
If you will have more questions then I can look into sources what is what and how it works.

 

Thanks for the response 
I tests
 
Fabio

Share this post


Link to post
Share on other sites

hi Slice

can you please add support for AMD R9 200 Graphics Card?

thanks in advance

My RadeonMonitor supports AMD 7xxx Graphics cards. Are you sure R9 200 is not supported?

Share this post


Link to post
Share on other sites

My RadeonMonitor supports AMD 7xxx Graphics cards. Are you sure R9 200 is not supported?

i get this message

RadeonMonitor: found Radeon chip id=6810 
sorry, not supported yet, please report DeviceID=0x6810

Share this post


Link to post
Share on other sites

 

i get this message

RadeonMonitor: found Radeon chip id=6810 
sorry, not supported yet, please report DeviceID=0x6810

OK, will be corrected tomorrow.

Share this post


Link to post
Share on other sites

Works 100% :thumbsup_anim:

thx

Truesoldier, tell me please what is working for you 100%?

I have a hd7970m and have only GPU temp...

Is the something what I can do to add frequencies?

 

Slice, спасибо за Вашу работу!

Share this post


Link to post
Share on other sites

Truesoldier, tell me please what is working for you 100%?

I have a hd7970m and have only GPU temp...

Is the something what I can do to add frequencies?

 

Slice, спасибо за Вашу работу!

work 100%

RadeonMonitor: found Radeon chip id=6810 
 Common ATI Radeon like PITCAIRN DID=6810 

i have R9 270X Desktop don't mobile i think there is the problem.

post-838043-0-77567800-1407867376_thumb.png

Share this post


Link to post
Share on other sites

work 100%

RadeonMonitor: found Radeon chip id=6810 
 Common ATI Radeon like PITCAIRN DID=6810 
i have R9 270X Desktop don't mobile i think there is the problem.

 

I see even you have not freqs of GPU....mine 7970m=7870 desktop...

 

Slice, I have IT8518E controller, I know you need registers description, and you know that's impossible to find this datasheets...

Here a guy said IT8518E have same instruction set as IT8510, IT8511, IT8512:

http://notebook1.ru/forma1/viewtopic.php?f=31&t=68896

 

Такие даташиты доступны на IT8510, IT8511, IT8512.

Система команд у них совместима с I8051/I8052.

I've already seen you have added support for IT8512F and from compairing pins (this is the only way I can do this) the pinout is the same...

The IT8518E is present on many brands like Asus, HP, Acer, Clevo/Sager/Shenker ecc.

Thanks!

Share this post


Link to post
Share on other sites

I see even you have not freqs of GPU....mine 7970m=7870 desktop...

 

Slice, I have IT8518E controller, I know you need registers description, and you know that's impossible to find this datasheets...

Here a guy said IT8518E have same instruction set as IT8510, IT8511, IT8512:

http://notebook1.ru/forma1/viewtopic.php?f=31&t=68896

I've already seen you have added support for IT8512F and from compairing pins (this is the only way I can do this) the pinout is the same...

The IT8518E is present on many brands like Asus, HP, Acer, Clevo/Sager/Shenker ecc.

Thanks!

OK, I will add 8518 same way.

Share this post


Link to post
Share on other sites

Slice, why does the radeonmonitor not measure GPU Core/Memory frequency? It would be very useful to keep an eye on GPU clock. 

Share this post


Link to post
Share on other sites

Slice, why does the radeonmonitor not measure GPU Core/Memory frequency? It would be very useful to keep an eye on GPU clock. 

I have the same question. GPUSensors does this with Kozlek's kext (on my 2600k+HD6850 build at least), but I'm guessing This FakeSMC probably won't work with GPUSensors and Kozlek's FakeSMC probably won't work with RadeonMonitor. I haven't tried Kozlek's FakeSMC on my AMD build since it doesn't have AMD support.

 

EDIT: My mistake, kozlek's doesn't do this either.

 

Also is it possible to measure Northbridge and Southbridge temps? I think they may be getting too hot on my NForce board but I have no way of knowing...

Share this post


Link to post
Share on other sites

Slice, why does the radeonmonitor not measure GPU Core/Memory frequency? It would be very useful to keep an eye on GPU clock. 

Because nobody knows how to do this on Radeons. I may extract values from BIOS  but I see no sense to show static values.

 

 

 

 

Also is it possible to measure Northbridge and Southbridge temps? I think they may be getting too hot on my NForce board but I have no way of knowing...

We got these temps in the case of ITE or Winbond. What chip do you mean?

Share this post


Link to post
Share on other sites

Because nobody knows how to do this on Radeons. I may extract values from BIOS  but I see no sense to show static values.

 

 

We got these temps in the case of ITE or Winbond. What chip do you mean?

It's an NVidia MCP55... I wasn't sure which to use for LPC, I thought SMBus was the right one, but it didn't work. I'm guessing it's not supported since it's an uncommon chip?

Share this post


Link to post
Share on other sites

It's an NVidia MCP55... I wasn't sure which to use for LPC, I thought SMBus was the right one, but it didn't work. I'm guessing it's not supported since it's an uncommon chip?

Yes, it is probably unsupported chip.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By ThomasMattOnline
      Hello Everyone,

      Trying to get Hardware Acceleration working on my Hackintosh (HEVC Support) however I am such a noob, OpenCore is very new to me and would love some support.
      I have included screenshots and the EFI that is currently working on my System, I have USB 2 & 3.0 all working, however, the only thing I can fault is my GPU not being hardware acceleration enabled.

      Final Cut Pro X - Recognises GPU
      VideoProc - Doesn't recognise anything.
       
      (I am running the latest version of OpenCore 0.5.9)

      Things I've tried: I tried following the post https://www.tonymacx86.com/threads/catalina-10-15-2-update-lost-hevc-h265-acceleration.288563/ - No Luck
      I have also tried: https://forums.macrumors.com/threads/activate-amd-hardware-acceleration.2180095/page-53?post=28255048#post-28255048 - No luck either!

      My friend online tells me I shouldn't need such Kext as he has the same build as me but when I load his EFI on my system it boots with no USB 2 or 3.0 (I'm keeping his EFI off here as I've uploaded mine.)

      Please note: I appreciate all (any) pieces of advice and please do bear in mind that I am a noob and may need whatever you say simplifying as I can get easily confused.


      config.plist

    • By miliuco
      Radeon RX 580 8 GB graphics card on macOS High Sierra (as of 10.13.6), Mojave and Catalina on the P55-USB3 board: excellent performance with acceleration (Metal) OOB, no need for drivers (kexts), with 3 drawbacks, one has to do with the boot of the operating system (a solution is proposed), another with the number of rear connectors enabled (a solution is proposed) and another that only affects to one phase of the Mojave or Catalina installation (without clear solution for now).

      I have placed the XFX AMD Radeon RX-580 P8DFD6 8GB Triple X Edition GDDR5, 256BIT, DVI + HDMI + 3DP graphics card on a 10 year old motherboard (Gigabyte P55-USB3) in order to update the hackintosh to 10.14 Mojave and 10.15 Catalina because the card that I have used in past years, Nvidia Geforce GTX 750 1GB, has stopped working after 10.13.6 High Sierra since this was the last version for which Nvidia published the alternate web drivers that were necessary for the card to work well with graphic acceleration.

      The new RX 580 card needs considerably more space than the old one although it fits perfectly in an ATX case, and requires an additional power connector. It has 2 big fans that most of the time are stopped, at least in my case. In macOS it works perfectly, even with Metal acceleration, without additional drivers and without extra settings in Clover. But it has drawbacks that I comment below.

      Alterations during startup

      During the boot of the operating system, when the screen goes from the basic driver to the AMD driver, 2 artifacts appear randomly, they are very short in duration (from one to a few seconds):
      Very short flashing white screen that may or may not be accompanied by purple lines The fans runs for a few seconds (the noise is clearly audible). This behavior is solved with the installation of 2 kexts, Lilu and WhateverGreen. Lilu is an extension created by acidantheraand vit9696 among others whose function is to help to patch kexts, processes and libraries during macOS boot. It is accompanied by specific plugins for the task required, for example WhateverGreen that injects necessary patches for certain AMD, Intel and Nvidia graphics cards. It is mandatory to have both extensions together, one of them separately does not correct the problem.
      I have installed Lilu 1.4.4 and WhateverGreen 1.3.9 in the EFI/CLOVER/kexts/Other folder of the EFI partition and artifacts have disappeared. Remember that these 2 extensions are not necessary for the card to work properly, if you tolerate those very brief distortions of the screen or the noise of the fans running for a few seconds, you can live without Lilu and WhateverGreen.

      Note: authors recommend that when using Lilu and WhateverGreen with Radeon cards, NO graphic settings have to be added to Clover (Inject ATI, etc.).

      Note: these alterations, especially the brief white screen and less frequently purple lines and fan noise, are also seen in Windows and some real Macs with the same card.

      Alteration during macOS installation

      Boot from USB > Clover menu > Install macOS from Install macOS Catalina > screen works fine
      Boot from USB > Clover menu > Install macOS from MacintoshHD > black screen
      Booting from USB > Clover menu > Boot macOS from MacintoshHD > screen works fine.

      In the first and third stages, screen works fine. In the second stage the screen goes black although the installation continues. The user has nothing to do at this moment so you can leave the PC working until the Clover menu is shown again, the screen is recovered, the initial account options can be configured and you can enter into the newly installed system with correct resolution and acceleration.
      This behavior is not corrected even by placing Lilu and WhateverGreen into the USB device. At least in my case I have not found a solution for it. Yo can install macOS perfectly with that drawback of not seeing how it progresses during the second phase of the installation.

      Only 2 connectors of the 5 available work

      This card has 3 Display Port (DP) ports, 1 HDMI port and 1 DVI port. In my case, only 2 DP work, those that are further from the HDMI connector. It is enough if you use a single monitor or 2 monitors that can be connected by DP. But if you want to have 3 or more connected devices or some of them only have HDMI, it is necessary to enable the 5 connectors or at least 4 of them since the DVI is obsolete and does not allow resolutions as high as DP and HDMI.
      User foxbox has proposed a solution in a thread titled [Solved] Sapphire RX 580 Nitro + SE | black screen on HDMI and DVI. Must inject from Clover a modification to the Orinoco framebuffer (which is used in the RX 580 card) so that the 5 connectors lack a fixedly assigned address and, instead, receive it dynamically. This change is made from the KextsToPatch section of Clover. Read the post from foxbox.
      This has to be accompanied by 3 changes in the Graphics section of Clover: Orinoco in FB Name / Inject ATI / 5 in Video Ports. I have tested this solution in macOS Catalina and it effectively enables the 5 ports of the card but, since I only use 1 monitor, I have removed it and I am with Lilu and WhateverGreen.
       

    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
    • By Gunzar
      Hello there!
       
      TL:DR; I built a Hackintosh system using the OpenCore Vanilla Desktop Guide (running Catalina 10.15.4) and I use an AMD Ryzen 1600 CPU and Radeon RX 5700 XT GPU. All works well except my displays are very blurry and it feels like I’ll get a headache if I try to look at the screen for very long. The picture quality is noticeably worse than Windows or Linux. What can I do to fix it?
       
      --
       
      Let me start off by saying that this is my first hackintosh build. I based my build on the Opencore Vanilla Desktop Guide at https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/. I’m running macOS Catalina 10.15.4.
       
      So I finished installing macOS after slowly and carefully taking about 8-10 hours to go through the guide yesterday and make sure I did everything properly. It paid off - it has been solid as a rock. However, there is one problem that is currently bugging me to no end - my displays are very blurry. This seems to be independent of any application or display resolution. My dock icons are blurry, the system text is blurry, app text is blurry (like in Slack, Safari, Notes, etc). This does not occur in Linux or Windows when using the same screens. 
       
      Also, as a test, I hooked up my girlfriend’s MacBook Pro to the same two screens, and the monitors are crystal clear again, just like they usually are in Windows. This leads me to think that my EFI may be configured improperly or my system may be missing some software or a kext that enables the displays to show a sharp image. I attached my EFI folder and my config.plist file for reference. 
       
      EFI setup:
      ACPI: SSDT-EC-USBX-AMD.aml Drivers: ApfsDriverLoader.efi OpenRuntime.efi VBoxHfs.efi Kexts: AppleALC.kext AppleMCEReporterDisabler.kext Lilu.kext RealtekRTL8111.kext VirtualSMC.kext WhateverGreen.kext (version 1.3.8) My boot args are: "npci=0x2000 agdpmod=pikera keepsyms=1 debug=0x100 alcid=1"  
      System specs:
      Ryzen 5 1600, no overclock or anything special Corsair Vengeance Pro RGB RAM, 32GB total (2x16GB DDR4 dimms running at 2400MHz) XFX Radeon RX 5700 XT RAW II 8GB GPU (this is listed as a PCIe 4.0 GPU, could that cause issues since my motherboard is PCIe 3.0 only? Works great in Windows/Linux) ASUS Prime B350M-A motherboard Samsung PM961 256GB NVMe SSD  
      My monitors:
      Samsung U32J59x (32” @ 3840x2160) ASUS MX279 (27” @ 1920x1080) The blurry issue also occurs when I plug directly into my 58" Samsung 4K TV.  
      I’ve already tried these steps:
      Adjusting monitor “sharpness” settings, totally unbearable at “0” but still looks pretty bad even at “100” Trying a bunch of different resolutions in the “Display” preferences. On the 4k monitor, the only one that looks any better is the 1920x1080p option, but then I have far too little screen space left. Using SwitchResX, no different than using different resolutions in the regular Display preferences Using subpixel antialiasing in the terminal with no noticeable difference, even through reboots Turning on/off AMD FreeSync on my 4K monitor — if I turn on FreeSync, the display lags and stutters, and quality is not any better. Also tried turning on/off “game mode” but that had no difference. Tried switching DisplayPort version between 1.1 and 1.2 in monitor settings (on 4K monitor) Checking my BIOS settings, such as making sure CSM is off, against the OpenCore guide that I used to make sure everything was correct  
      Does anyone else have some other ideas that could help to correct this issue? Any ideas would be greatly appreciated. Thanks in advance!!
      -Gunzar
      EFI.zip
      config.plist
    • By anokic
      I have been using clover to install and configuration my Hackintosh High Sierra 10.13.6. It's been a struggle and a pain. Can't restart/shutdown/wake from sleep. Random freezes. When freeze happens mouse works but in loading state. UI and open apps freeze not the mouse. I can make the apps smaller and move them.

      I haven't used any DSDT nor SSDT. Tried 5 or 6 of them from others but sometimes i end up not booting. Could someone explain me do i even need them and why? Do i need DSDT or SSDT or both?

      I'm going to try to install everything OpenCore. The first thing is i can't use a method that needs an internet while installing MacOS cause my ethernet/internet only works when i install MacOS. So i can't use the images i need full installation. Okay i have the full installation for 10.13.6. I need to use a version 10.13.4-6 versions cause application Sketch needs the newer one High Sierra 10.13.4++ version.

      Can you tell me? Can i use same kexts from Clover on OpenCore? Secondly how can i install full USB MacOS installer? (High Sierra 10.13.6 version i have is 7gb i think thats it)
      Is there a version of AMDHigh Sierra version made from the community for 10.13.4++ version?
      If i use the normal 10.13.6 High Sierra should i use this AMD 10.13.6 Kernel when i have installed the MacOS or some other kernel that's better for my system? https://github.com/Shaneee/AMD-High-Sierra-XNU/releases
      Whats the best version of High Sierra to use for Ryzen and Nvidia system?

      Will it be better to use OpenCore?

      Specs:
      Mortar Max B450M
      Ryzen 2600x
      Nvidia GTX 1060
      16gb DDR4 2400mhz
×