jpenguin Posted February 1, 2014 Share Posted February 1, 2014 The clover EFI menu appears, but then the apple logo appears with a the grey progress bar underneath; like the iMac firmware update. Once the bar finnishes, the machine shuts off EDIT: like this Link to comment Share on other sites More sharing options...
Pimentel Posted February 1, 2014 Share Posted February 1, 2014 Hello I had this same proeblem... i just configure my Bios Link to comment Share on other sites More sharing options...
jpenguin Posted February 1, 2014 Author Share Posted February 1, 2014 Thx, I'll check. It was working before, but I could have messed something up GA-Z87X-OC Link to comment Share on other sites More sharing options...
jpenguin Posted February 1, 2014 Author Share Posted February 1, 2014 Doesn't seem to be working, my myHack USB doesn't seem to boot either. Maybe I should try Niresh? Link to comment Share on other sites More sharing options...
Pimentel Posted February 2, 2014 Share Posted February 2, 2014 HelloNiresh is distro, i don't advice use distro...Use Myhack...Please, post your specs... is hard help someone without know about his hardware. Link to comment Share on other sites More sharing options...
jpenguin Posted February 2, 2014 Author Share Posted February 2, 2014 GA-z87x-OC 650 Ti Intel Core i3-4330Pioneer Electronics USA 15x SATA Internal BD/DVD/CD Burner with 4 MB Buffer BDR-208DBK I'll try myHack (again), last time I installed with Pandora- but my flashdrive broke. I order a couple Kengington 8GB sticks, and 20 DVD+r DL- should be her midweek I currently have linux running on the machine $ lspci00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)00:1c.4 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)00:1f.0 ISA bridge: Intel Corporation Z87 Express LPC Controller (rev 04)00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti] (rev a1)01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)02:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI Bridge [Cheetah Express] (rev 01)03:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221 IEEE-1394b OHCI Controller [Cheetah Express] (rev 01)04:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41) Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 2, 2014 Share Posted February 2, 2014 Here is my 10.9 install guide: http://rampagedev.wordpress.com/os-x-10-8-mountain-lion/ Boot with: -v npci=0x2000 GraphicsEnabler=No (it might need GraphicsEnabler=Yes) Then report back the results. Link to comment Share on other sites More sharing options...
jpenguin Posted February 3, 2014 Author Share Posted February 3, 2014 Reinstalled with myHack. "Prebuild rebuild failed"? Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 4, 2014 Share Posted February 4, 2014 Hung on the GPU. You tried both boot flags correct? Link to comment Share on other sites More sharing options...
jpenguin Posted February 4, 2014 Author Share Posted February 4, 2014 Yep, however I noticed something else. During boot, it tells me that 2 of my USB ports aren't getting power It installed and boots with Pandora. Still had to boot with the flash drive though, can't seem to get Enoch installed to the HDD Link to comment Share on other sites More sharing options...
jpenguin Posted February 4, 2014 Author Share Posted February 4, 2014 I got clover installed and (I think) working. For now I'm using a USB sound card, since I don't have my mobo's sound working Link to comment Share on other sites More sharing options...
Recommended Posts